Hi,
I installed CM 10.2 on my A510 to try it out, did a full wipe, and got stuck in a boot loop. Wiped again and reinstalled but had the same issue. I have tried again with CM 10.1.3 and the AOKP roms but have the same issue, full wipe before each install. Right now I cannot get past the boot screen where the tablet restarts and tries again and again and again etc....
Any help would be welcome.
Thanks
When you say Full Wipe, it means Factory reset ?
Did you try to restore a Backup with CWM or TWRP ?
Yes factory reset. I tried restoring with CWM but each of my backups fail to restore either failing to restore /data or /system.
Sent from my GT-I9300 using Tapatalk
Did you try to copy your zip file both on internal and external sd card ?
checked MD5sum ?
Did you try to flash a stock ROM from Acer ?
Shreps said:
Did you try to copy your zip file both on internal and external sd card ?
checked MD5sum ?
Did you try to flash a stock ROM from Acer ?
Click to expand...
Click to collapse
Yes to all the above. Did the stock ROM one hour ago and doesn't boot loop buts just sticks at the iconia tab logo. Also when I try to get recovery now I just get a dead Android picture.
Edit: Using Stock ROM I get a message that Android is upgrading Optimizing aa 1 of 46, 2 of 46, 3 of 46 and it then retorns to the iconia tab logo and stays there
I finally got the tablet working again by installing the original ROM using fastboot for each of system, flexrom, boot and recovery. I then installed 10.2 which works OK apart from the fact that when using Titanium to restore my apps the tablet reboots randomly. So far I've only managed to restore 10% of my apps.
EDIT: Constant reboots now regardless of what I'm doing, downloading, installing etc. Going to try another ROM, 10.1 or AOKP. On 10.1 now, restoring apps from Google works for a while but after a certain stage random reboots starts again.
Lastest, back in endless boot loop. Tried restoring by fastboot but flexrom restore fails every time.
I have a similar problem on my A700... Installed 10.2 and then suddenly did not boot anymore. Tried to flash the nighly before the newest one but id did not change. Then i made a backup in CWM and formatted DATA. Now i boots but if i restore the backup, it won't boot. I can find my files in a 0\0\0\0\0 Folder or something like that. So nothing is lost, but it's not in the running system.
How to restore these files and apps?
After at least 25 wipes and flashing various roms 10.1 10.2 and AOKP I think my tablet is reasonably stable now. I formatted - /data /system /flexrom internal storage, everything except the external sd a few times then installed and have only had one random reboot since 2am. Instead of restoring from titanium or direct from Google I reinstalled all my apps individually and the restored my data from titanium. Hopefully this will be the end of this.
Sent from my GT-I9300 using Tapatalk
Related
Hello,
Today I wanted to try CM 10.2, so i did an backup of my actual CROMI 4.7. Then I wiped the tablet and after this I flashed CM 10.2.
I used it for half an hour and decided to restore back to CROMI. I startet the restore in TWRP but at the point restore data it says fail.
I did this also with older backups everytime it says fail at the data restore.
Finaly i downloaded the actual CROMI Zip with my computer put it on the microSD and flashed it. Everything looked good but it does not start.
In middle of the bootanimation the tablet restarts.
What can I do to flash any rom?
PLEAS HELP
Thanks
[email protected] said:
Hello,
Today I wanted to try CM 10.2, so i did an backup of my actual CROMI 4.7. Then I wiped the tablet and after this I flashed CM 10.2.
I used it for half an hour and decided to restore back to CROMI. I startet the restore in TWRP but at the point restore data it says fail.
I did this also with older backups everytime it says fail at the data restore.
Finaly i downloaded the actual CROMI Zip with my computer put it on the microSD and flashed it. Everything looked good but it does not start.
In middle of the bootanimation the tablet restarts.
What can I do to flash any rom?
PLEAS HELP
Thanks
Click to expand...
Click to collapse
Try this:
1. Reboot to recovery
2. Select Mount and uncheck System, Cache and Data
3. Go to Advanced, then Terminal Command, then hit Select Folder to start Terminal
4. type "e2fsck -fvyD /dev/block/mmcblk0p8" and press return. Wait for the process to finish (this is for Data)
5. type "e2fsck -fvyD /dev/block/mmcblk0p2" and press return. Wait for the process to finish (this is for Cache)
6. type "e2fsck -fvyD /dev/block/mmcblk0p1" and press return. Wait for the process to finish (this is for System)
Click to expand...
Click to collapse
Then try wiping and reflashing a ROM.
[email protected] said:
Hello,
Today I wanted to try CM 10.2, so i did an backup of my actual CROMI 4.7. Then I wiped the tablet and after this I flashed CM 10.2.
I used it for half an hour and decided to restore back to CROMI. I startet the restore in TWRP but at the point restore data it says fail.
I did this also with older backups everytime it says fail at the data restore.
Finaly i downloaded the actual CROMI Zip with my computer put it on the microSD and flashed it. Everything looked good but it does not start.
In middle of the bootanimation the tablet restarts.
What can I do to flash any rom?
PLEAS HELP
Thanks
Click to expand...
Click to collapse
Seems to be an epidemic of this... ???
You may want to follow this thread too: http://forum.xda-developers.com/showthread.php?t=2416220
Sent from my ASUS Transformer Pad TF700T using Tapatalk 4
Thank you so much.
I let it run over the night, it wasn`t finished but after a restart i could format data an flash my backup
Why is my Samsung p5100 stuck in a reboot and crash loop?
I am using Mokee 44.2 p5100 2014/03/09 and at the beginning all was well now, since about the last week it just will not stay on. Every time it restarts it downloads app updates, and forgets that I've installed / uninstalled certain apps. they all just reappear. Then during these updates the tablet crashes, then reboots and downloads app updates, crashes, reboots etc... etc...
I have tried to flash this Mokee and Omni ROM from Phils touch wizz, I'm wiping all data and factory reset, wiping dalvic and formating /system, /data and /boot. Then install from the zip file. This reports that the ROM is now installed use and enjoy. Upon rebooting the tablet, straight back into Mokee 44.2 2014/03/09 and the above mentioned reboot, crash loop resumes.
I have tried to re install the Samsung stock ROM from ODIN 3.04 and this get to the FACTORYFS section and fails!
So, the question is an i now stuck with a useless tablet?
I have also now discovered that I am unable to update the Philz or CWM recovery. Although Odin says again that the upload has been successful.
So i rooted my tablet about a week ago and went to install adaway today when i went to reboot it it got stuck in a loop and so i tried a factory reset but now its in a loop of starting, saying upgrading apps, then saying process com.android.phone has stopped working then restarting again and keeps going what can i do to fix it?
CarsonM135 said:
So i rooted my tablet about a week ago and went to install adaway today when i went to reboot it it got stuck in a loop and so i tried a factory reset but now its in a loop of starting, saying upgrading apps, then saying process com.android.phone has stopped working then restarting again and keeps going what can i do to fix it?
Click to expand...
Click to collapse
You Should flash the stock firmware through Odin . Your data will not be erased .
Don't forget to press the thanks button :good::good::good:
Really! Flash to stock just for a bootloop. Unnecessary I think. I would just go to recovery and wipe system, cache, and dalvik and reflash the ROM. If that doesn't fix, then do the same but wipe data as well. You'll have to reinstall apps of course with that last one. Also, If you have an external sd card and a card reader, you could download a different ROM to the card and flash that one in recovery.
Lol
wolfclan68 said:
Really! Flash to stock just for a bootloop. Unnecessary I think. I would just go to recovery and wipe system, cache, and dalvik and reflash the ROM. If that doesn't fix, then do the same but wipe data as well. You'll have to reinstall apps of course with that last one. Also, If you have an external sd card and a card reader, you could download a different ROM to the card and flash that one in recovery.
Click to expand...
Click to collapse
Flashing to stock always fix bugs that wiping can't solve
Because flashing to stock will restores the original firmware :good:
Sent from Gallifrey using TARDIS
Here are the particulars.
rooted
Display JZO54K
Fingerprint = motorola/tervigon/wingray:4.1.2/JZO54K/.....
Loaded elementalx - xoom- v1.3 three months ago ran fine. Stupidly, I did not flash a backup. Now after deleting cache, factory reset, stuck in "loading apps" after splash, the boot loops back to motorola screen where I can launch CWM v4.0.0.4 - I want to get a ROM on there and continue using this mission-critical dinosaur. Can someone help?
I guess the real question is can a rom be copied onto the ext-sd card via windows out of the xoom? If so will CWM see it and will it work?
Have not tried connecting and using ADB. Not feeling confident enough at this point. ext SD still has data but when in CWM device does not show up in Windows.
TIA for any help
Geoff
sasquatchgeoff said:
Here are the particulars.
rooted
Display JZO54K
Fingerprint = motorola/tervigon/wingray:4.1.2/JZO54K/.....
Loaded elementalx - xoom- v1.3 three months ago ran fine. Stupidly, I did not flash a backup. Now after deleting cache, factory reset, stuck in "loading apps" after splash, the boot loops back to motorola screen where I can launch CWM v4.0.0.4 - I want to get a ROM on there and continue using this mission-critical dinosaur. Can someone help?
I guess the real question is can a rom be copied onto the ext-sd card via windows out of the xoom? If so will CWM see it and will it work?
Have not tried connecting and using ADB. Not feeling confident enough at this point. ext SD still has data but when in CWM device does not show up in Windows.
TIA for any help
Geoff
Click to expand...
Click to collapse
I pushed a stock rooted rom via ADB (I found the internal sdcard is accessible via the ADB shell) . The stock rom showed up in the CWM select zip file list. Installed the rom and the xoom animation freezes then continues the boot loop - regardless of rom installed. Cleaned system cache and davik cache as well after factory wipe. I am beginning to think hardware issues. No amount of cajoling will get this thing to boot into its OS. Either memory or processor - when it worked, I did have it running incredicontrol and 1.4 ghz and the max memory limitation upped to 64MB in order to run a lecture player for school.
Ok, so I asked this in XDA Assist but can't post reply there.
This is what happened on my Xperia mini St15i, with firmware 4.1.B.0.587:
1. I turned on Bluetooth and the phone got stuck in infinite boot loop - apparently this is a known bug.
2. I decided to try out CM 9. Installed CWM Recovery and did backup on sd card and flashed CM.
3. I remembered that I did the backup earlier so I thought maybe there is a way to keep my apps and data.
4. I went back to CWM and restored from backup. CM didn't boot then, so I flashed back stock rom with flashtool and booted the phone. The apps and data was there( at least for one app which was very important), but contacts and messages were gone.
So my question is, is there a way to recover ALL user data from the backup? I don't care if it's on stock rom or CM at this point.
I hope some of you knowledgeable people can help!
Many thanks,
Paul
Can someone please help. :crying:
I managed to restore it with all the data by trial and error (I don't know HOW). Then at night the phone lost battery and is back to rebooting forever.
If I restore all via CWM and then flash stock, it boots up saying "Android is upgrading" and then keeps rebooting.
If I do a factory reset via CWM and flash stock rom, the phone is back to factory setting with no data.
WHICH partitions should I recover and which should I flash to retain the data??? HELP :crying: