Hello all,
I had karbonn a11 with custom rom lewa os and was working fine. today i downloaded new lewa os and tried to flash through CWM 6.0.3. Installation even finished and required to reboot but when I clicked reboot, It could not rebooted. Power is not getting on only vibration when I press power button. No lights on even I connected to PC but shows no any information in computer. Please tell how to recover the phone...
Thanks
Prashant
hi all,
in bolt 35 i tried to install custome rom eclipse thru cwm recovery due to check another options i selected format /.system option and after restarting my phone ,in phone only bolt logo is coming and phone is vibrate to times normally it was vibrated one time only. i thought i need to install stock rom i have download try to install stock rom using upgrade downloder but it is not installed and after connecting flash application mobile is continuously vibrated and not install rom please give me solution for installed stock rom in my phone
I have a MyPhone A888 Duo with mizwa rom v2. Now problem is that i done a factory reset and than it goes to CWM recovery and asked Rom may flash recovery stock recovery on on i press Yes than my phone is robot since phone start recovery mode screen shows and than factory reset animation show and again phone restart now my phone stuck into this loop and i am not able to start phone normally and unable to enter recovery mode please help help help (Sorry for my English)
mujahidislam said:
I have a MyPhone A888 Duo with mizwa rom v2. Now problem is that i done a factory reset and than it goes to CWM recovery and asked Rom may flash recovery stock recovery on on i press Yes than my phone is robot since phone start recovery mode screen shows and than factory reset animation show and again phone restart now my phone stuck into this loop and i am not able to start phone normally and unable to enter recovery mode please help help help (Sorry for my English)
Click to expand...
Click to collapse
Flash your phone with stock rom
flash it with your device's flashing tool
Any problem you can reply
I am always there to help you
Hit THANKS if I helped you
MyPhone A888 Dyo
pandian8552 said:
Flash your phone with stock rom
flash it with your device's flashing tool
Any problem you can reply
I am always there to help you
Hit THANKS if I helped you
Click to expand...
Click to collapse
Thanks i followed your instructions and wow problem solved thanks man!
Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone
Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me
GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:
The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me
MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.
mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping
Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine
Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
sainitish said:
hii ,i am sainitish
i have a china MTK tablet runs on android 4.2.2(jellybean)
recently i flashed a custom ROM in it but the ROM is not made for that!! using CWM recovery.
then the device show flash successful message.but when i turn on the device it got stuck on boot logo.
so i removed it and flashed another rom in it but this ROM also not made for my device!!
and again same thing happen with second ROM also i got stuck on boot logo.
so i frustrated so without flashing anything i accidentally removed the current not working ROM and CWM from my device.
so now i came to risk i dont have any rom or recovery flashed on my device.so now i am not even able to flash my backed up stock rom on my device.so my device got dead now.
ITS JUST CHARGING,POWERING ON AND SHOWING A DUMB BLACK BLANK SCREEN AND EVEN NOT POWERRING OFFF BACK(SO I NEED TO USE THE RESET BUTTON ON MY DEVICE TO MAKE IT TURN OFF)
CAN ANYONE PLS PLS HELP ME TO MAKE IT WORK.PLEASEEEEEEE!!
Click to expand...
Click to collapse
Just download ur stock rom and flash it with SP flash tool