Database Info

[Q] qmobile a10 recovery mode is not running

my problem is that I flashed for the second time cwm recovery mode and now I try to go into recovery mode.it start to load and after the loadin the phone restart normaly and reset al my data
i tried mobile uncle to instal cwm butt it has no effect please any body can help me

I am in the same situation. If somebody has any clues, please share.
Thanks.

[Q] Ace plus keeps restarting ! Heeeelp!!

Hi guys
i was just trying to flash ATOMODS after choosing tweaks and apps and finshing the installation
the phone keeps restarting only !
I can acess the download mode but i thing i cant acess recovery mode IS IT A BRICK ! ? :crying:
i have a nandroid backup !
PLEASE GUYS HEEEELP :crying:

Try the following:
---
1-Remove your battery and place it again.
Hold the following buttons at the same time and in the following order
HOME+VOLUME DOWN+VOLUME UP+POWER
Now your phone should boot in recovery mode and all you have to do is restoring your old backup.
---
2-If you can't boot in recovery mode, boot in download mode, connect your phone to PC and use Odin to reflash your recovery.
---
3-If nothing help, flash your stock/custom rom using Odin.

Bassel Bakr said:
Try the following:
---
1-Remove your battery and place it again.
Hold the following buttons at the same time and in the following order
HOME+VOLUME DOWN+VOLUME UP+POWER
Now your phone should boot in recovery mode and all you have to do is restoring your old backup.
---
2-If you can't boot in recovery mode, boot in download mode, connect your phone to PC and use Odin to reflash your recovery.
---
3-If nothing help, flash your stock/custom rom using Odin.
Click to expand...
Click to collapse
Thanks Man I tried it and it worked :laugh: :good:
But why did this happened i just tried to flash atomods .
و مقوليش انك عربي !!

3elwa said:
Thanks Man I tried it and it worked :laugh: :good:
But why did this happened i just tried to flash atomods .
و مقوليش انك عربي !!
Click to expand...
Click to collapse
you have to flash automod over another custom rom which is deodexed.
if you flash this on stock rom you will face bootloop issue...

I have inspiration rom v12
Sent from my GT-S7500 using xda app-developers app

j.posarekar70 said:
you have to flash automod over another custom rom which is deodexed.
if you flash this on stock rom you will face bootloop issue...
Click to expand...
Click to collapse
I Have Inspiration rom I think it should work but it did't :crying:

DOWNLOADING......
Do not turn off target!!
my phone is running LG-e610 by the whisp and i'm using it for almost a month. Suddenly my phone reboot and stuck on boot(LG logo). I've waited for 5 minutes and still on boot so i pull out the battery. When i open my phone, it boot in download mode with this message:
i try to open reboot in recovery but instead of LG optimus L5 it go to download.
i cant flash stock rom in worldclock because in download mode cannot go further, Worldclock cant detect my phone. it just stuck in that message.
plss i need help to fix this.

This tread it's not for Lg L5 but samsung galaxy ace plus. Try to see this http://forum.xda-developers.com/showthread.php?t=1790342 and try to flash stock rom or stcok/custom recovery

guys plz help ... my ace plus keeps restarting... I have installed pure galaxy rom lone back and today I have restarted my phone and suddenly my touch wiz stopped.. so I restarted my phone but it never starts. it keeps showing that gt s7500 screen and vibrates and again restarts... plz help help......
thanks in advance

aniruth.yanamandra said:
guys plz help ... my ace plus keeps restarting... I have installed pure galaxy rom lone back and today I have restarted my phone and suddenly my touch wiz stopped.. so I restarted my phone but it never starts. it keeps showing that gt s7500 screen and vibrates and again restarts... plz help help......
thanks in advance
Click to expand...
Click to collapse
You must go on recovery and wipe data cache and dalvik. this will erase all you app and data.

Hi
I am facing the same issue please help
Sent from my PC36100 using XDA Free mobile app

[Q] CWM got mad :(

hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks

amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro flash stock rom via SP flash tools it will work'
i got this already twice and solved via SP flash tool

amitsaini said:
hello everyone,
I was using ICS stock ... after reason a thread I successfully rooted, installed CWM 6.0.2.8 with mobile uncle and then I flashed it with jellybean v3 ROM .. for a few days got no problem... but yesterday when I tried to go on CWM recovery mode hen my phone got factory reset automatically...... I thought may be my fingers slipped ... then I tried again and again and every time whenever I pressed VOL up button to go in recovery mode..... it directly factory reset my phone.... I flashed to install stock recovery of Micromaxa110 and after that when I tried to go in recovery mode .. it also factory reseted and then showed me a android logo with some red warning on it... I pull my battery out and start again now .... and flashed cwm again.... but now didn't tried to go in recovery mode due to fear... if anyone knows the solution then plz help me out... my cwm recovery mode is resetting my phone thanks
Click to expand...
Click to collapse
bro. no need to flash full Rom.. ..rename clockworkmod recovery.. file to recovery.img and flash it through sp tools ...problem will solve

If nothing seems to work then try twrp recovery..flash it through sp flash tools or mobile uncle tools as per ur wish..

Hey techs,
Thanks, actully problem was solved after 5 mins when i posted this thread,, but i was not able to find this thread to post the answer.
solution was right there when i reinstalled the stock recovery and again installed the cwm hehehehe,, it worked,, thank you all have a nice day

Ntg happen. Open ur flas tools and load the scatter load file 4.1.1 and then click start after the green ring appers. Its ok. Now the process of rooting. Now u can easily root ur mobile.
Sent from my Micromax A110 using xda app-developers app

[Q] Help！My device bricked!

HELP!!!
I flash http://forum.xda-developers.com/showthread.php?t=2682626
It tells me that i can change the boot logo and i tested!But it goes wrong!
:crying:
My device now can only go into the ODIN Mode and if i flash the recovery or any other custom ROMs,it can be succeeded but it still can't turn on.Now if i turn on the device,NOTHING will happen,no pictures!
I can't go to the RECOVERY Mode,either.
My English is poor,but please HELP!!!

Relax....if you can go to ODIN mode then it's not brick yet
Flash Stock ROM for your country from ODIN.
Then reflash custom recovery & custom ROM

I hope that you strictly keep install process!
xuyijie said:
HELP!!!
I flash http://forum.xda-developers.com/showthread.php?t=2682626
It tells me that i can change the boot logo and i tested!But it goes wrong!
:crying:
My device now can only go into the ODIN Mode and if i flash the recovery or any other custom ROMs,it can be succeeded but it still can't turn on.Now if i turn on the device,NOTHING will happen,no pictures!
I can't go to the RECOVERY Mode,either.
My English is poor,but please HELP!!!
Click to expand...
Click to collapse
It's my MOD and you must, after using my MODDER, reboot to recovery again not reboot to system. Then you get this problem you have.
But as the d4rkkn16ht said, you don't have bricked device. Long story and solving the problem is in this thread (some user had the same problem as you have): http://forum.xda-developers.com/showthread.php?t=2682004 When you read his problem it was because of bad picture size. Wish you luck! Peter :fingers-crossed:

Bricked XOLO Q3000 (SOLVED)

Bricked XOLO Q3000 (Once Again)
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??

SOLVED
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..

Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
How u flashed the philz recovery??
There is no way u can brick ur deivce while flashing recovery if u follow the methods given here.
U can always press the thanks button if ur using any stuff of any dev.
Formatting emmc means formatting ur internal storage too.
ur all data on internal storage will be gone

Bricked Again
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???

help help help... avi
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:

Xolo Q3000 stuck in Boot Loop
Haldar_dhruv said:
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE.So I've become quite of an engineer ..
Click to expand...
Click to collapse
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.

Su007 said:
Hi,
I tried to flash the twrp custom recovery via a flash tool on my device post which the device got stuck in boot loop. Now when i am trying to flash the recovery or even trying to install stock rom nothing is working the device does get recognized on any pc or laptop in spite of the drivers being there... i am new to all this would really appreciate your help in fixing this.
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/show...74&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me

GauravBak said:
i flashed twrp 2.8.0.0, then tried installing hny15 8/1/2015 rom but installation failed , then flashed philz recovery through twrp then reboot but stucked on xolo boot logo. trying to go to recovery but xolo logo flashes again n again, what to do now brother. HELP..! PLZZZZZzzzz,..
:crying:
Click to expand...
Click to collapse
Solution : Visit http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
"This method is useful for warranty purposes and also for UNBRICKING !!!!
U can revert back to normal rom from any possible bad situations like soft brick or hard brick.
Also u can enjoy ur stock rom.
U will need sp flash tools and flash files."
SEE THE CATEGORY : INSTALL STOCK FIRMWARE
download the flash files and follow the guide
Ask avi3230 as I am not that much experienced,He helped me :cyclops:

The Most Important Page
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button

Haldar_dhruv said:
This time it happened when I was editing the build.prop .I saved the file as I had the original build.prop file backed up.Then I thought I should restore it.I copied the build.prop file from my sdcard and overwrited it to /system .But now its again struck in boot loop.I just need access to the phone storage so that I can try to replace it again.What should I do???
Click to expand...
Click to collapse
try too flash again the original roms via stock recovery..

Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
Try flashing the ctr recovery! use flashify and flash either the zip file or the img file! This should work
worked for me

MIUI ROM Woooooo
Yes I have already solved this post Thanks anyway
EAGERLY WAITING FOR MIUI rom to be uplaoded today by avi
KEEP CHECKING HERE http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1

rashr..
Haldar_dhruv said:
Bricked my XOLO Q3000 Kitkat while trying to install PhilZ custom recovery.Now its stuck in boot loop(the XOLO logo keeps appearing again and again).I backed up the stock boot.img and recovery.img through FlashifyI even tried installing stock recovery through mtk droid tools but to no avail.Now what to do??
Click to expand...
Click to collapse
try to flash recovery.img via rashr... It shoul work for u.

mujaid714 said:
try to flash recovery.img via rashr... It shoul work for u.
Click to expand...
Click to collapse
Thanks But the Problem was already solved, would make some sense for others maybe.
Thanks For Helping

Haldar_dhruv said:
Before u do anything with your beloved XOLO Q3000 visit and bookmark this link http://forum.xda-developers.com/showpost.php?p=55599274&postcount=1
If problem solved hit the Thanks button
Click to expand...
Click to collapse
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine

alfamine said:
Hi Haldar,
Can you please guide me through step by step please, I am very new to all these. To try anything, My xolo q3000 is stuck in bootloop and is not getting detected on any PC or even turning on to get it flashed to any software.
Any help would be greatly appreciated.
Thanks
alfamine
Click to expand...
Click to collapse
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE

Haldar_dhruv said:
Tell me in detail whatever happened. Try the below procedure also.
No matter how much you brick your phone,there is a mode called Factory Mode.Open it by holding vol down key+ Power .Then select format emmc and DONE
Click to expand...
Click to collapse
I tried to flash to a recovery.img through flashify application and now bricked my phone which is in bootloop now and is neither booting to use other softwares or methods neither is it getting detected on any PCs to flash custom recovery.
I have tried to Volume down + power button and also Volume up + power button to get into recovery menus but none to success,
Just stuck at boot logo of xolo.
Thanks
alfamine

Go to this link here
http://forum.xda-developers.com/q3000/development/xolo-q3000-one-ultimate-thread-t3038259
Then click on unbricking, install adb drivers in pc etc and continue as it says.