[Q] Soft brick problems - Samsung Galaxy S Blaze 4G

ok my blaze was rooted running a 4.3 rom (dirty unicorns) i was playing a game and all of a sudden it booted off, it booted back up and the samsung logo appears it goes black and vibrates. So i decided to revert back to stock and once i go to download mode menu and once i select to enter download mode it randomly reboots to the samsung logo and then it starts to vibrates again, i cant even get into recovery, what do i do, is it hard bricked?

dirty_s0ciety said:
ok my blaze was rooted running a 4.3 rom (dirty unicorns) i was playing a game and all of a sudden it booted off, it booted back up and the samsung logo appears it goes black and vibrates. So i decided to revert back to stock and once i go to download mode menu and once i select to enter download mode it randomly reboots to the samsung logo and then it starts to vibrates again, i cant even get into recovery, what do i do, is it hard bricked?
Click to expand...
Click to collapse
If it just froze and rebooted the recovery should be fine.
Pull the battery for a minute. Insert it, then hold both volumes down together (the whole rocker), then hold the power button until it vibrates then release the power button. Continue to hold the volumes until the recovery is up. Restore a backup or do a clean reflash.

Romman0 said:
If it just froze and rebooted the recovery should be fine.
Pull the battery for a minute. Insert it, then hold both volumes down together (the whole rocker), then hold the power button until it vibrates then release the power button. Continue to hold the volumes until the recovery is up. Restore a backup or do a clean reflash.
Click to expand...
Click to collapse
Thats the thing, it doesnt even get to recoveryit just vibrates after seeing the samsung boot logo , ive looked around the internet and other people have had this issue as well with the s2, i know that the phone isnt completely dead though, i just dont know what to do, i did nothing and all of a sudden this just happened

Happened to me, I had to it replaced... Does it constantly reboot and vibrate non stop?
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app

Jserrano56 said:
Happened to me, I had to it replaced... Does it constantly reboot and vibrate non stop?
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Exactly, all i need is download mode but when i enter it it vibrate loops after a press volume up.

when i enter download mode i see a blue screen then it boots and vibrates, why is it doing that

When the screen turns blue, does it start off black, and then start becoming pixelated and end up blue? Or does it just turn blue immediately? I had the same issue where I bricked my phone while I was using 4.3, and tried reverting back to stock... Sometimes, you cannot get into download mode if the phone is plugged in or not plugged in... Try both ways to see if you get any different results! Also try removing the battery for 30 seconds and then putting it back in... When you go back to stock, make sure it is ICS and not GB! You only get stuck in a boot loop if you do GB!
Sent from my SAMSUNG-SGH-T769

Hard brick won't boot at all. Even though it's not booting properly it still boots which means there is hope. Try going in to download mode plugged into USB with the battery pulled. If it works Odin back to stock. If you get stuck in a boot loop after flashing stock, don't panic. Just boot to recovery and wipe your cache's and reboot. Let us know if you need anything or resolve the issue.
Sent from my SAMSUNG-SGH-T769 using XDA Premium 4 mobile app

Related

[Q] Triumph stuck at moto logo, cant get into clockworkmod

Ok so today my triumph stopped responding so i restarted it (took out the battery). then rebooted. upon reboot phone shuts down and now will hang at the motorola logo for about 10 min before boots but will shut back down due to the battery being dead(but had full charge when this started). Dont know what happened. So i try to get into clockworkmod to flash backup. cant get into it. the only thing i can do is get to the recovery.img file(pressing power+volume down). Other than that nothing.
also tried to boot with power pluged in. it stayed on but would not respond to any touches or button press except the lock button.
I have cwm 5.0.2.6 installed and tickerguy's cm7.
never had this problem till today. Any help would be appreciated.
a new development has occurred. now when i try to access recovery, the phone will just vibrate without stopping.
and i believe its stuck in a boot loop but without recovery i dont know anyway to exit the loop.
Are you able to get into download mode (power off then simultaneously press power button & vol- (should show polling))
Sent from my Triumph using xda premium
Yes i am able to get to download mode
Well after some tinkering (replacing the recovery image, assuming something corrupted it) i can now get to recovery, still takes 10 min to load it though. But i am unable to do anything in recovery because i have to press the menu button to confirm selection but the buttons wont respond. Some help would be appreciated.

Bricked SG Tab 2 7.0

Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
extasy88 said:
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
Click to expand...
Click to collapse
Can you get into recovery? Also, have you tried unplugging the charging cable and getting into download mode with the cable unplugged?
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Edit: After I get to the screen where it asks me if i want to go into download mode, it reboots within 5-10 seconds, no matter which button I press
extasy88 said:
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Click to expand...
Click to collapse
Hold power and Volume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
p3113owner said:
Hold power and Volkume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
Click to expand...
Click to collapse
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
extasy88 said:
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
Click to expand...
Click to collapse
Then I guess you can (and need) to send it in for warranty service (or replacement).
p3113owner said:
Then I guess you can (and need) to send it in for warranty service (or replacement).
Click to expand...
Click to collapse
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Rotundjere said:
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Click to expand...
Click to collapse
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Experiments:
Power off the tab completely and charge completely and press power +volume up for 10 seconds then release, also try to power off and press power+ volume down for 10 seconds then release do you see any screens
If it says do you want to enter download mode or so press volume up and see if you could see (downloading) try also the same with volume down instead of up
Try to connect to computer do you see any messages indicating connections
Also try to connect to kies and try restore or recover firmware from options of kies
You said it reboots after 5 to 10 seconds so try to open odin and try to go to download mode and when you press volume up try as quickly as possible to connect tab to pc while odin is open
Sent from my GT-P5100 using xda app-developers app
p3113owner said:
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Click to expand...
Click to collapse
There's other method by using OpenRecovery (OR), by putting OR on external SdCard,
but it seems the OR for Gtab2 is not developed yet -__-

[Q] Probably bricked P3113 - Need Confirmation

So, been running CM10 for a long time on tab. Decided to go back to stock, and downloaded the JB stock rom. Flashed via ODIN. Everything seemed to go OK, except that after the flash the screen went black for ages, and didn't reboot. So I hard powered it off. Probably what did it, but it wasn't going anywhere for about 15 minutes, so figured it was the next step.
Now, I get the battery charging icon. The system goes through the Galaxy Tab 2 7.0 white logo, the swirling then glowing Samsung logo, and then loops through that forever.
It wouldn't be such a problem if I could back into ODIN and do another flash, but I can't get into download mode (normally I do it via adb but that isn't working since there is no USB connection at all). Tried all combinations, power/up, power/down etc. It just boot loops as above. I'm pretty sure I bricked it, but just wanted some confirmation.
Been doing this on and off for a long time, and it's the first time I've ever got stuck like this.
Thanks in advance.
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
ketut.kumajaya said:
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
Click to expand...
Click to collapse
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
sl0ttedpig said:
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
Click to expand...
Click to collapse
You must pull usb cable before start.
You can try to re-flash.
tuxafgmur said:
You must pull usb cable before start.
You can try to re-flash.
Click to expand...
Click to collapse
Well, don't I feel like the idiot!
How did I not think to disconnect the USB before trying this? tuxafgmur, your first "Thanks" has been registered, I've got it from here!
P.S. Welcome to the forum!
it sounds strange. never heard of such a strange boot problem. anyway it could be that while transferring boot.img it became damaged due to some error. i know you probably tryed but you may try and connect it to linux or mac os x in order to check if you could retrive more data about the tab. for example the mac could find if it is totally corrupted. normally when i plug my samsung devices it ask me to add the samsung-modem also if they are turned off. meybe if it happens the same to you you can try to adb fastboot it also if i doubt myself about it working, but give it a shot
i hope my bad english is not preventing you to understand what i'm saying!
give us new feedback!

Power button Failure, Can't go into Recovery, Download.

My power button decides to become unresponsive.
So I tried to unroot my phone and bring it back to a stock image and when I go into download mode, 2 seconds later, it turns off. :crying:
I try another method by using mobile odin to see if that helps. Tried to flash the stock image and it tried to reboot to Recovery mode. Nothing. It stays in a black screen after the samsung galaxy s3 logo. After pulling the battery, it tries to reboot to recovery again and still, a black screen. The only way to stop it from booting to recovery is to set it back to download mode. I hold the power button and it restarts. ( The power button seems to work when I try to go to recovery, download, power on.
I am running Cleanrom 6.0 R2.
I am in deep [email protected]#!. I do not want to go to verizon and notice my phone is rooted and I can't fix it without a huge bill.
Please help if possible

ODIN to stock without power button working? Is it possible?

Sorry for the long title but it states my predicament. Basically my power button is done and I can't boot into recovery anymore. It just is a endless cycle of reboots(vibrates everyone 15 seconds or so). I even tried to enter download mode, which it does but than restarts the bootloop issue. Anyhow, I've never used ODIN so someone please fill me in. I want to ODIN back to stock because it's my last hope and basically I can't get into recovery anymore anyway. But do I need to use my power button to ODIN? Also what if I can't get into ODIN mode because it just wants to continue to reboot. Any help? I'm at a lost here.
Oops, wrong section. Mods can you please move to Q&A...sorrrry.
tu3218 said:
Sorry for the long title but it states my predicament. Basically my power button is done and I can't boot into recovery anymore. It just is a endless cycle of reboots(vibrates everyone 15 seconds or so). I even tried to enter download mode, which it does but than restarts the bootloop issue. Anyhow, I've never used ODIN so someone please fill me in. I want to ODIN back to stock because it's my last hope and basically I can't get into recovery anymore anyway. But do I need to use my power button to ODIN? Also what if I can't get into ODIN mode because it just wants to continue to reboot. Any help? I'm at a lost here.
Oops, wrong section. Mods can you please move to Q&A...sorrrry.
Click to expand...
Click to collapse
Moved to Q and A. I suggest pulling your battery for at least thirty minutes or maybe an hour. Then put the battery back in(do not power on) and plug the phone into your charger and allow it to charge overnight. From what you have said the power button does indeed work but you have done something to your phone causing a boot loop. In the morning search XDA for Odin procedures (there are a plethora of them on XDA) and attempt your Odin to stock. If the phone continues to boot loop I hope you have insurance... I did this to my LG Optimus once... And couldn't save it...
VeNuM said:
Moved to Q and A. I suggest pulling your battery for at least thirty minutes or maybe an hour. Then put the battery back in(do not power on) and plug the phone into your charger and allow it to charge overnight. From what you have said the power button does indeed work but you have done something to your phone causing a boot loop. In the morning search XDA for Odin procedures (there are a plethora of them on XDA) and attempt your Odin to stock. If the phone continues to boot loop I hope you have insurance... I did this to my LG Optimus once... And couldn't save it...
Click to expand...
Click to collapse
It does "work" but not correctly. Apparency its a known issue and called SDS. basically the way it acts is that when I press the button, the phone
Is acting as if I pressed it twice. So I press it to turn screen off, screen comes right back on. Long press power button for reboot menu, flashes, dissapears and than comes right back. This I believe is why I can't boot into recovery or download mode. Not that the phones bricked, but the phone is having trouble recognizing power button hits.
So my last try was to Odin back to stock just to see if that helps. But when I hold the buttons down to get into download mode or select it in reboot menu, it boots into it real quick(I see download mode appear on screen) but than immediately starts looping. So when I use Odin, will it automatically boot into download mode for me? What about mobile Odin?
Sent from my Galaxy Nexus using xda app-developers app
I had the same problem With my s3... It was out of warranty so I sent it to mobile tech videos to have the power switch repaired. It's been great ever since. I realize that doesn't really Answer your question about Odin, just figured I'd chime in with what I had to do. I was afraid to attempt to Odin or flash anything before the repair bc in my mind the phone believed the power button was being pressed repeatedly and that would make it interrupt the flash.
Also if you're under warranty, Samsung will most likely fix it despite being rooted. Mobile Tech Videos sounds like a great option too if you're out of warranty, glad to see there's an alternative way to get it fixed.
Sent from my SCH-I535 using Tapatalk 2
I don't have the phone in question but for my Samsung Vibrant (Galaxy S, T-mo variant) if you press and hold the Volume Up button while plugging in the charger or say your computer's USB port the phone will boot into download mode. Not sure if it will work for the S3 though. Hopefully it does! :fingers-crossed:
Also, for my work around, I've mapped the Volume up button within ROMs to 'POWER WAKE' to replace the power button. It's not needed but its an easy way to reboot to recovery if its implemented in the Roms power menu. Occasionally the phone will crash or the battery may die. If I'm at home, that's an easy fix, just boot up download mode and flash a kernel/modem/recovery via odin and make sure auto reboot is selected. The phone should boot, granted there are no errors. The only problem I have is when it crashes or battery dies and I'm not at home I can't turn on the phone. If anyone knows a way around powering on or booting into recovery without the use of the power button or odin/download mode I will be eternally grateful. I'm try to get my Vibrant in working order for my father whose never had a Smart phone. I myself have upgraded to the s4 and am glad I stuck with what I knew instead of getting the HTC One. =]
http://forum.xda-developers.com/showthread.php?t=1931310
Read this thread. Power button issues on S2 might help and save you time and money. Or if you want to get into download mode use adb.. "adb reboot download " or can be done in terminal.
Sent from my SCH-I535

Categories

Resources