So, been running CM10 for a long time on tab. Decided to go back to stock, and downloaded the JB stock rom. Flashed via ODIN. Everything seemed to go OK, except that after the flash the screen went black for ages, and didn't reboot. So I hard powered it off. Probably what did it, but it wasn't going anywhere for about 15 minutes, so figured it was the next step.
Now, I get the battery charging icon. The system goes through the Galaxy Tab 2 7.0 white logo, the swirling then glowing Samsung logo, and then loops through that forever.
It wouldn't be such a problem if I could back into ODIN and do another flash, but I can't get into download mode (normally I do it via adb but that isn't working since there is no USB connection at all). Tried all combinations, power/up, power/down etc. It just boot loops as above. I'm pretty sure I bricked it, but just wanted some confirmation.
Been doing this on and off for a long time, and it's the first time I've ever got stuck like this.
Thanks in advance.
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
ketut.kumajaya said:
Plug USB charger, your device will boot into charge mode. From charge mode you can boot into recovery by keep holding VOLUME UP button and than press POWER button. Clear data and cache in recovery, reboot.
Click to expand...
Click to collapse
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
sl0ttedpig said:
Thanks, but I tried all combinations of Power/Volume UP and Power/Volume DOWN, it just goes through a normal boot cycle until it starts looping.
I guess it's possible I'm not using the right timing. I'm assuming that you hold Volume UP or DOWN and then press and hold Power until the screen goes black, and then release? I've done it like that many times, and also continued to hold everything down as the logo appears, and then system goes back to the battery charging icon as if it powers off again. I sound like such a noob when I type stuff like that!
I saw ODIN successfully write system.img, boot.img, and recovery.img, so I'm thinking any CWM recovery I had on there is toast.
Click to expand...
Click to collapse
You must pull usb cable before start.
You can try to re-flash.
tuxafgmur said:
You must pull usb cable before start.
You can try to re-flash.
Click to expand...
Click to collapse
Well, don't I feel like the idiot!
How did I not think to disconnect the USB before trying this? tuxafgmur, your first "Thanks" has been registered, I've got it from here!
P.S. Welcome to the forum!
it sounds strange. never heard of such a strange boot problem. anyway it could be that while transferring boot.img it became damaged due to some error. i know you probably tryed but you may try and connect it to linux or mac os x in order to check if you could retrive more data about the tab. for example the mac could find if it is totally corrupted. normally when i plug my samsung devices it ask me to add the samsung-modem also if they are turned off. meybe if it happens the same to you you can try to adb fastboot it also if i doubt myself about it working, but give it a shot
i hope my bad english is not preventing you to understand what i'm saying!
give us new feedback!
Related
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
check ur pm mate
Its power button + volume up AND down... hold both buttons and the power button.
sulpher said:
Its power button + volume up AND down... hold both buttons and the power button.
Click to expand...
Click to collapse
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
My phone was being a bit finicky with this as well, I found the below sequence to work for me every time.
Press and hold both vol+ and vol-
Press and hold power
Wait until phone is vibrating once every couple of seconds
Release power
Release vol+ and vol-
ArecxP said:
I wasn't being specific, I just named the buttons off the top of my head. Either way, the methods don't work
Click to expand...
Click to collapse
u need to b specific to get proper help.
u stated "Either way, the methods don't work ", specifically what methods r u talking about, there is only one method in using the buttons that works as RabidSmurf has stated, but first pull battery and dont keep usb plugged in, if that didnt work redownload cwm, check the md5 checksum and reflash using odin
To get into download mode I'm holding power+vol up+vol down
after the phone starts up release the power and keep holding up+down.
Let me know how it works.
ArecxP said:
Okay guys, I have an annoying problem. My phone after the ICS update does not want to go into CWM Recovery with the Power button + vol down (or up) method. I can never get the darn thing to work. It just loads up until the white samsung logo and then goes black and just vibrates. Any idea what could be the problem? It's an issue because it means I can't root or anything since stock won't allow me to go into recovery. The only way I used to get into recovery was through rom manager and I obviously need super user permissions to do that.
Another thing is, whenever I power on my phone with the usb cord plugged in, it automatically enters download mode. I know you're suppose to hold certain buttons but I just power the thing on and it goes straight to the DL mode screen. I'm thinking these two things could be related.
Any idea on how to fix this? I went back to complete stock and it didn't do a thing.
Click to expand...
Click to collapse
Make sure it is not attached to any USB. Not even the power outlet because it will take you to firmware update mode (download mode) and hold up down volume keys and power until you see the white Samsung logo. good luck!
i had to deal with this when the firmware failed to ugprade for some reason, what i did was download odin and the stock rom and flash it with odin, i was back up in no time
Not booting
Frnds plz help
After flashing am n m same soc chipset custom rom my phone is not going in cwm also another problem is after pressing the power button the phone screen is gping black n then boot audio is playing but phone is not booting completely.
To be more specific i have cqnvas 2 plus with mt6589 and pne site there was eom name note 5 evolution for a116 hd with same soc i.e. mt6589 hence i flashed the rom it flashed succesfully also but then the problems occurred.
Plz help me fast thx in advance.
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
extasy88 said:
Ok. I bought this Galaxy Tab 2 7.0 from a friend for cheap because I thought I could fix it, but I'm running out of options. It's in a boot loop, but an abnormal boot loop. If it's unplugged, It will do the splash screen (Samsung) boot loop. If it's plugged in, either into the wall or into my computer via usb, it will do a battery (charging) boot loop. It's kinda weird. I used to have an Epic 4G and it happened damn near all the time, without the battery loop, but it would charge normally.
I haven't successfully gotten it to boot into Download mode.
If any of you have come across this issue, please feel free to help me out.
I also attached a picture of me attempting to put it in download mode. It reboots if I hit either VOL up or VOL down.
Thanks
Click to expand...
Click to collapse
Can you get into recovery? Also, have you tried unplugging the charging cable and getting into download mode with the cable unplugged?
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Edit: After I get to the screen where it asks me if i want to go into download mode, it reboots within 5-10 seconds, no matter which button I press
extasy88 said:
I'm not sure how to get into recovery. With it unplugged, all I have to do hold the VOL Down physical button and ti will take me to a "are you sure you want to put the device into download mode screen". I apologize. I'm not to familiar with this device.
Click to expand...
Click to collapse
Hold power and Volume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
p3113owner said:
Hold power and Volkume up (volume button closest to the power button) until the tab shuts off and reboots itself and then you can let go of both buttons. If it works, try doing a factory reset. Was this tablet rooted (or have a custom rom installed) in the past?
Click to expand...
Click to collapse
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
extasy88 said:
As far as I know it's been on Stock. My GTab ignores me holding the Power and Volume up keys at the same time and keeps the boot loop going strong.
Click to expand...
Click to collapse
Then I guess you can (and need) to send it in for warranty service (or replacement).
p3113owner said:
Then I guess you can (and need) to send it in for warranty service (or replacement).
Click to expand...
Click to collapse
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Rotundjere said:
No, his device is fine.
If your device bricked, but still showing Gtab2 logo on it, it's still fine. You need to flash to stock 4.03 rom via ODIN. (Not clockworkmod)
Warranty won't work if you have flashed custom ROM before.
Click to expand...
Click to collapse
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Experiments:
Power off the tab completely and charge completely and press power +volume up for 10 seconds then release, also try to power off and press power+ volume down for 10 seconds then release do you see any screens
If it says do you want to enter download mode or so press volume up and see if you could see (downloading) try also the same with volume down instead of up
Try to connect to computer do you see any messages indicating connections
Also try to connect to kies and try restore or recover firmware from options of kies
You said it reboots after 5 to 10 seconds so try to open odin and try to go to download mode and when you press volume up try as quickly as possible to connect tab to pc while odin is open
Sent from my GT-P5100 using xda app-developers app
p3113owner said:
He needs to be able to get into Download Mode to use Odin. He stated that he can't. When he tried to continue into download mode by pressing volume up (vol. button closes to power button) the tablet reboots. It needs warranty service.
Click to expand...
Click to collapse
There's other method by using OpenRecovery (OR), by putting OR on external SdCard,
but it seems the OR for Gtab2 is not developed yet -__-
Hi there,
The other day I was on TWRP and tried to flash an ASUS update file (probably didnt really know what I was doing). Anyway, the flash failed.
I then thought I ought to wipe the OS and restore to a backup. I got as far as wiping the OS when the battery died.
The next day I turned the device on and a progress bar appeared but didn't get anywhere. Frustrated, and aiming to reboot into TWRP, I turned off the tablet.
It now will not turn on.
So...Hard brick?
I will have to send this thing off to Asus otherwise.
Many thanks, reply much appreciated.
Chaza
Bump, any ideas?
chaza01 said:
Hi there,
The other day I was on TWRP and tried to flash an ASUS update file (probably didnt really know what I was doing). Anyway, the flash failed.
I then thought I ought to wipe the OS and restore to a backup. I got as far as wiping the OS when the battery died.
The next day I turned the device on and a progress bar appeared but didn't get anywhere. Frustrated, and aiming to reboot into TWRP, I turned off the tablet.
It now will not turn on.
So...Hard brick?
I will have to send this thing off to Asus otherwise.
Many thanks, reply much appreciated.
Chaza
Click to expand...
Click to collapse
Bump. Any quick reply would be welcome, I think I've been a noob so sorry if this thread makes you want to smash your head into the keyboard. I hadn't flashed anything for ages so was a tad rusty.
When I plug the transformer into the computer the led on the power button comes on, but the transformer will not power on.
Any ideas?
Many thanks
chaza01 said:
Bump. Any quick reply would be welcome, I think I've been a noob so sorry if this thread makes you want to smash your head into the keyboard. I hadn't flashed anything for ages so was a tad rusty.
When I plug the transformer into the computer the led on the power button comes on, but the transformer will not power on.
Any ideas?
Many thanks
Click to expand...
Click to collapse
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
I'll give that a try
kiden said:
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
Click to expand...
Click to collapse
Hi, many thanks for the reply, I will give that a try and get back to you tomorrow.
Many thanks
tried...
kiden said:
You should still be able to get into recovery even with a bad wipe/flash, but your battery is drained. You need to plug it into the wall charger and let it charge and then boot directly into recovery.
Once you are there, you should be able to flash a ROM.
Click to expand...
Click to collapse
Hi there,
I charged the tablet over night and the LED was showing as it was charging.
However, it still will not turn on.
When I connect the tablet to the computer the computer eventually recognizes that something is connected but deems it to be corrupted.
Any ideas?
Many thanks
Did you boot into recovery like I instructed?
Boot into Recovery Mode. You can do this by pressing and holding down the Volume Down and Power buttons until you are greeted with a message saying “Press Volume Up to enter RCK (5S)”. In less than 5 seconds, press the Volume Up button to enter Recovery Mode.
kiden said:
Did you boot into recovery like I instructed?
Boot into Recovery Mode. You can do this by pressing and holding down the Volume Down and Power buttons until you are greeted with a message saying “Press Volume Up to enter RCK (5S)”. In less than 5 seconds, press the Volume Up button to enter Recovery Mode.
Click to expand...
Click to collapse
Hi, it will not boot at all.
However, when I plugged it into the computer and did so, the computer made a beeping sound therefore recognizing a device was attached after I had pushed down the power button and volume down. On one occasion, it recognized an asus device was connected, and so I proceeded to install the correct driver and so installed 'asus bootloader' or whatever it was called. This didn't seem to change anything so I deleted the driver intending to install Asus ADB bit so I could perhaps force a boot from the computer. However, after uninstalling the driver the computer stopped recognizing the tablet beyond 'APX'.
Any ideas?
manyt thanks
bump
was installing ARHD 7.0, which ive done several times and now the phone wont boot after a reboot. i can vol/pwr up to get to the splash screen, but cannot get into fastboot/hboot or back into twrp. any ideas?
Belay my Last!
Fortunately I found a post from the M8 thread and was more or less, a timing issue on my part. Thanks to Tikerz for his post/reply
Quote below:
"When you plug it into the computer does the computer make a ding sound that it's connected? If so, then press power and volume up until the disconnect ding sound which indicates it's rebooting and then immediately press volume down and see if you can get into fastboot. The timing is tricky so I've found using audio cues from computer can help if the phone is messed up."
I had to do this also. It will work. I thought for sure I had bricked my M8. But if u hold power and volume up at same time time screen goes black..then let go of power and volume up and hold volume down till u see fastboot. From there u can fastboot flash RUU package. I say that cause I personally found that restoring a backup of re-flashing ROM didnt work..at least for me.
http://forum.xda-developers.com/showthread.php?t=2727831
donlu30 said:
was installing ARHD 7.0, which ive done several times and now the phone wont boot after a reboot. i can vol/pwr up to get to the splash screen, but cannot get into fastboot/hboot or back into twrp. any ideas?
Click to expand...
Click to collapse
A brick refers to a phone that is essentially a .. brick. Won't power on, no charge light, 100% dead.
Edit: PROBLEM SOLVED! However I'll keep this up just in case anyone runs into a similar issue, I'll go ahead and quote the post that brought my tablet to life. As simple as it may be, it helped!
pjim said:
Hold the power button until it turns off. After it turns off, press and hold volume down, then BRIEFLY press the power button while still holding volume down.
You can't really hold them together sometimes, I don't know why.
Hold volume down, press power and release, while holding volume down. Should go into bootloader then.
Click to expand...
Click to collapse
Okay, so in case I'm missing something, I'll keep it quick and say my tablet (WiFI version) wont boot to the system, and no button combo will boot it into the bootloader. It goes straight to the nvidia screen no matter what, and won't get past the boot animation.
In case that doesn't cover it, and more info is needed, I'll give the complete rundown of all that happened.
I just got my tablet a few days ago, however I immedietly unlocked the bootloader, and rooted it, and was fine with that for a while. Eventually I got sick of Lollipop due to lack of support for some Xposed modules and other apps that didn't support 5.0. So I decided to boot into recovery and flash THIS CarbonROM. But it didn't boot past the CarbonROM logo, so I forced a shutdown and booted into recovery (vol down + power) and figured I had to flash the KitKat OTA, then the ROM. So I flashed THIS OTA onto my tablet in CWM, then after booting I booted back into CWM and flashed CarbonROM. It booted just fine. I then went into ES File Explorer and deleted the system apps I didn't want (calender, the stock launcher, etc.) and it worked fine. I then booted back into CWM to clear cache and Dalvik Cache, to clean up any app data that might have been left behind. After booting it stayed on the "Android is upgrading" screen for almost 20 minutes. So I decided to hard reboot it. After doing that, I'm where I am now. The tablet won't boot past the CarbonROM logo, and although I can manually power it down, no matter what I do, I can't boot it into bootloader. I have gotten to the bootloader from a powered off state plenty of times before, in fact it's my preferred method of doing so. But now it skips straight to the Nvidia screen, followed by the CarbonROM screen, and never boots.
Also, I had just flashed the ROM, and had never enabled adb debugging.
Any possible solution would be greatly appreciated, as like I said I just bought the tablet days ago.
Try connecting it to your pc, boot it up, and try running "adb reboot revovery" after it's been running for a bit
ailima said:
Try connecting it to your pc, boot it up, and try running "adb reboot revovery" after it's been running for a bit
Click to expand...
Click to collapse
I seem to get a "error: device offline" message when I try that.
I have used adb and fastboot before this issue so I know my drivers and adb files are just fine :/
Edit: When I unplug the usb from the tablet it makes the low battery noise. I think it's booted to the system but stuck at the CarbonROM logo for some reason. I did delete the stock launcher without installing a new one...
Edit: Since I had just flashed the ROM, I had not yet gone into developer options and enabled adb debugging. I had only done it before I flashed the ROM.
FoxyDrew said:
I seem to get a "error: device offline" message when I try that.
I have used adb and fastboot before this issue so I know my drivers and adb files are just fine :/
Edit: When I unplug the usb from the tablet it makes the low battery noise. I think it's booted to the system but stuck at the CarbonROM logo for some reason. I did delete the stock launcher without installing a new one...
Edit: Since I had just flashed the ROM, I had not yet gone into developer options and enabled adb debugging. I had only done it before I flashed the ROM.
Click to expand...
Click to collapse
Hold the power button until it turns off. After it turns off, press and hold volume down, then BRIEFLY press the power button while still holding volume down.
You can't really hold them together sometimes, I don't know why.
Hold volume down, press power and release, while holding volume down. Should go into bootloader then.
pjim said:
Hold the power button until it turns off. After it turns off, press and hold volume down, then BRIEFLY press the power button while still holding volume down.
You can't really hold them together sometimes, I don't know why.
Hold volume down, press power and release, while holding volume down. Should go into bootloader then.
Click to expand...
Click to collapse
I literally love you right now.:laugh:
Seriously thank you, I thought I was screwed. I just wonder why it works like this. I'll have keep it in mind for the future haha, thanks:good: