I Instalet many roms and on everyione was working perfectly before some time i instaled viper 1.3.2 and when i conect it to computer my phone is only charging now i instaled cyanogen mod 10.1 its not working again only charging.
I selected file transfer in settings>storage> menu but still nothing can anyone help me please...
ViperS uses MTP (Media Transfer Protocol) and not UMS mode (USB Mass Storage mode) (as like CM, MIUI, etc).
Just go to My Computer and you'll find an entry "HTC Sensation Z710e". Double-click on it and it will show you your SDCard
silentvisitor said:
ViperS uses MTP (Media Transfer Protocol) and not UMS mode (USB Mass Storage mode) (as like CM, MIUI, etc).
Just go to My Computer and you'll find an entry "HTC Sensation Z710e". Double-click on it and it will show you your SDCard
Click to expand...
Click to collapse
I checked that already i read on this forum about that but nothing of that is working i also tried on diferent computers first is saying unknown device and after that i try MTP and usb mass but nothing ... Something else
What exactly you want to do ?
If you want to transfer files to phone or take backup of SDCard then boot into 4EXT Recovery > Connect USB cable to phone > Select "Toggle USB storage" (or something like that). Your phone will now show up in My Computer as a new drive. You can do whatever you want including Formatting
Good Luck !!!
silentvisitor said:
What exactly you want to do ?
If you want to transfer files to phone or take backup of SDCard then boot into 4EXT Recovery > Connect USB cable to phone > Select "Toggle USB storage" (or something like that). Your phone will now show up in My Computer as a new drive. You can do whatever you want including Formatting
Good Luck !!!
Click to expand...
Click to collapse
Thank you very much thats exactly what i needed if its not working then its hardware problem i guess...
ivanmadzarov said:
Thank you very much thats exactly what i needed if its not working then its hardware problem i guess...
Click to expand...
Click to collapse
have you enabled usb debugging mode also?
Related
Im trying to install a new rom in my gtab and for some reason when i plug it into my laptop the gtab is not popping up on the computer?????? I turned on debugging just like i did when i originally did it.?????????????? Its a sony laptop running windows 7 home premium any ideas?????
withoutcomp1 said:
Im trying to install a new rom in my gtab and for some reason when i plug it into my laptop the gtab is not popping up on the computer?????? I turned on debugging just like i did when i originally did it.?????????????? Its a sony laptop running windows 7 home premium any ideas?????
Click to expand...
Click to collapse
debugging allows adb to work.
You need to turn on usb storage on your tablet for your computer to see it.
How do i do that?
I have cyanogenmod installed in it
It should be in the notification area on your tablet every time you plug your computer into your tablet. "USB connected. Select to copy files to/from your computer"
select it and then press the button "Turn on USB storage"
When you are done then press "Turn off USB storage"
Thats what i thought but theres nothing there??????
withoutcomp1 said:
I have cyanogenmod installed in it
Click to expand...
Click to collapse
I installed cm6.2 beta last night and I think it mounts the sdcards differently than any of the other roms. Be aware there are some differences in this rom but the usb mount is universal
So what do i do? I got noting here, is ther something in the setting i have to change?
If you have clockwork recovery installed then boot into clockwork recovery. (if not then install clockwork recovery 0.8)
Plug tab into computer with USB cable
Go into "mounts and storage"
"mount USB storage"
Don't know if it makes a difference but I only use the mini usb port on the tab.
I didn't have cm 6.2 installed long because it still has all the 3g stuff on it but it seemed to me it was seeing my external sdcard (sdcard2) as my internal sdcard (sdcard). You could try putting the update.zip on a micro sdcard and putting that in the tab and then seeing if clockwork sees it to install
Did that and still nothing
Any other ideas?
hi, I just installed Vegan-Tab 5.1 and i tried to connect the USB to my computers (windows vista/xp) neither of them recognizes the removable disk. gtablet shows USB connected, and on my PC it asked for installing Nvidia Harmony driver, i dont have one so the system failed to install it. Then drive E: shows up, but when i click it it shows "please insert a disk into removable disk E:".
When i had the original TNT ROM although it prompted for install Nvidia Harmony but i can still access E:.
Please help.
Well I think you need to turn on USB storage on the tablet
Drag notification bar down and select files to copy to/from computer
Then enable USB storage
I just installed the same rom and am having the same problem. Can't find a way to get my computer to see the usb, it shows up, but asks for disc.
I'm also having the same issue, PC won't "see" the tablet
also USB thumb drives are not recognized anymore
Missing USB Flash
I'm having the same problem running Vegan 5.11 and it can't see a flash drive plugged into it.
Ed Kinsel
Big Ideas
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
No prompt comes up when PC is connect to device.....
Plug in USB................... nothing happens
Also, I noticed that when a SD Card is inserted, the text under >settings>SD Card & Device storage> READS "unmount in progress" after you mount the SDCARD
Now it's working
meandg5 said:
Finally got BigIdeas installed and I don't have usb either. It shows up on the PC but it asks for a disk. When I (try) to enable it on the tab it just sits and the little icon turns like it's tryin but I get nothing? Any help would be appreciated. Thanks, Howie
Click to expand...
Click to collapse
Went into CWM and mounted the USB drive, rebooted, and now it works fine?
Also, when I am in ES file explorer and I am navigated to the /sdcard
it reads ""sdcard unmounted or not present"
got it all figured out......
Still not seeing the flash
Does connect through the mini USB to the internal SD storage...
Anyone know id there's any docs for the Vegan system?
Ed Kinsel
dootle said:
turn on usb mass storage on you g tablet then wait about 30sec.sometimes it takes that long for my pc to allow access to the drive(im on win7 64bit).
Click to expand...
Click to collapse
I am a noobie, how do you enable this on Vegan tab ? TnT Lite had a prompt.
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
I'm having the same problem with the unmount in progress. Can you please tell me how you figured it out? I've done everything including nvflash, CWM, to start fresh and I still am making no progress.
Thanks
I had the same problem. Here is what worked for me.
1. Plug in your USB.
2. You should see the USB icon show up on the top left taskbar.
3. Swipe that taskbar downwards.
4. Click on "USB connected"
5. Click on the "Turn on USB Storage" icon on the bottom right of the screen.
6. Click "OK"
Your drive letter should be mapped on your PC, you should be able to drag and drop files. When you are done, just click the "Turn off USB Storage" icon. You can now disconnect your USB cable.
Hope that helps.
Thank you so much. This is simple once you know it, but I was completely stumped. Am still getting used to the UI.
Thanks! Saved me a lot of possible pain.
Thank you very much!!! Iwas in the same fix!
DLP-ROB said:
got it all figured out......
Click to expand...
Click to collapse
That posting is really helpful (sarcasm). How did you get it figured out?
I'm having the same problem and I'm not getting the USB connected symbol or any other notification from the tablet that the PC is connected.
I'm running CM with the clemsyn kernel 2.6.32.9.
Please help i cant get my phone to connect to transfer files it says device ID missing please contact hardware manufacturer. I installed the samsung dirvers from samsung but no keis or anything.
I have the same issue on my WinXP machine.
I still get it, but when you plug in the device check the screen and toggle your connection settings on the USB popup.
do you have a SD card or are you just using the internal?
i have internal and external sd.
Yea, make sure you check the phone to make sure it is set as a storage device.
shawnten said:
Please help i cant get my phone to connect to transfer files it says device ID missing please contact hardware manufacturer. I installed the samsung dirvers from samsung but no keis or anything.
Click to expand...
Click to collapse
do u have a custom rom? i had this happen with jellywiz custom rls 2, was your developer mode turned on? try connecting it as a storage devide (mtp) instead of as a camera with developer mode on...
this solved the issue for me, i think...
I cannot get Mtp to work with debugging on. Turn it off, and it works fine. Unrecognized device, sd cards greyed out with debugging on. (fyi running synergy)
Sent from my SCH-I535 using xda premium
i can get it to go into camera ptp mode but not mtp. i have tried a couple different roms it all started when i backed up the iemm or whatever it is. and in camera mode i cant see ext sd just internal
Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
djsubtronic said:
Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
Click to expand...
Click to collapse
Works fine for me... try reflashing the recovery?
asdfasdfvful said:
Works fine for me... try reflashing the recovery?
Click to expand...
Click to collapse
I'd be more inclined to try another PC. Maybe some driver you installed is causing issues. When you mount your phone, go into your device manager and try deleting any phone devices or storage that appear, then reconnect and maybe it will install the correct driver.
el_smurfo said:
I'd be more inclined to try another PC. Maybe some driver you installed is causing issues. When you mount your phone, go into your device manager and try deleting any phone devices or storage that appear, then reconnect and maybe it will install the correct driver.
Click to expand...
Click to collapse
Maybe he could also try using a toolkit?
http://forum.xda-developers.com/showthread.php?t=1604677
Tried reflashing. In fact it even happened before I had my phone's motherboard replaced. Only on 2.5.0.0, regardless of which PC I use. Other versions of TWRP work fine.
djsubtronic said:
Most of the times when I select USB storage in TWRP 2.5.0.0, nothing happens. The drive doesn't show up and nor does the USB attachment icon in the notification area of my PC. Works fine on other versions though. Any ideas?
Click to expand...
Click to collapse
Somehow CWM/TWRP recoveries were always fu*** up for me when it comes to USB connection ... Theoretically it depends on your PC drivers when its not working and you got the newest version of TWRP.
I cannot access files via usb storage in twrp, an unknown device appears in device manager on pc it named "One S" but it's unknown and nowhere to find a f**in driver for it... I cannot install ANY os on the phone now and I'm feeling very stupid. OTG doesn't work I cannot tick USB OTG in Mount menu, what a damn phone..............
Please need help....!!!!
I accidentally formatted my internal storage , cache ,
data, system and everything.by format all partition except sd card in 4ext recovery.after then I cannot able to mount the USB and not even fastbootusb ,as it is saying waiting for device. The phone is running fine besides the lack of usb access in any way. Charging works fine.
USB lead charges phone without issue, however on
connecting to ANY PC makes no attempt to make a
connection for Mass Storage, Tethering, HTC Sync or
any other service.
I'm using viperS 1.6.3 Rom ICS 4.0.4
faisal459459 said:
Please need help....!!!!
I accidentally formatted my internal storage , cache ,
data, system and everything.by format all partition except sd card in 4ext recovery.after then I cannot able to mount the USB and not even fastbootusb ,as it is saying waiting for device. The phone is running fine besides the lack of usb access in any way. Charging works fine.
USB lead charges phone without issue, however on
connecting to ANY PC makes no attempt to make a
connection for Mass Storage, Tethering, HTC Sync or
any other service.
I'm using viperS 1.6.3 Rom ICS 4.0.4
Click to expand...
Click to collapse
do you have vipers installed now?
if yes enable usb debugging mode from settings
Still Not working ...
rzr86 said:
do you have vipers installed now?
if yes enable usb debugging mode from settings
Click to expand...
Click to collapse
Thanks for Reply.
Dear i have tried this "enable usb debugging mode"
but still not working .
Any other suggestion pleas.:crying: