I live in Mauritius Island in the Indian Ocean. My phone is unlocked and on stock rooted GB, mobile data was working well with my local mobile network.After upgrading to cm10.1, was working great.
But after flashing Beanstalk 10.2, calls and SMS were working, but mobile data was not working with my network's access point.
Flashing cm10.2 did not help either.Flashing cm10.1 did not resolve it although at first, data was working.
Returned to stock rooted GB with same access points settings and mobile data working again!
Anyone's help would be much appreciated as I found the stock ROM quite messy.
But I wouldn't mind staying on stock as I now have a great camera and music player again compared to CM although this would be my last resort
Fullmetal Jun said:
I live in Mauritius Island in the Indian Ocean. My phone is unlocked and on stock rooted GB, mobile data was working well with my local mobile network.After upgrading to cm10.1, was working great.
But after flashing Beanstalk 10.2, calls and SMS were working, but mobile data was not working with my network's access point.
Flashing cm10.2 did not help either.Flashing cm10.1 did not resolve it although at first, data was working.
Returned to stock rooted GB with same access points settings and mobile data working again!
Anyone's help would be much appreciated as I found the stock ROM quite messy.
But I wouldn't mind staying on stock as I now have a great camera and music player again compared to CM although this would be my last resort
Click to expand...
Click to collapse
this link could help
http://forum.xda-developers.com/showthread.php?t=2404287
Thanks tried that before when I messed up restoring SMS app.
But I can't figure out how to get my mobile data working on a custom ROM.It's working on stock GB ROM, but not on JB???
Before restoring to stock,I could only use WIFI for internet on my phone
Stock is okay, but is a little too slow.I miss you JB.
Crap you Samsung for making your own custom chips instead of using normal Qualcolmm chips.
Fullmetal Jun said:
Thanks tried that before when I messed up restoring SMS app.
But I can't figure out how to get my mobile data working on a custom ROM.It's working on stock GB ROM, but not on JB???
Before restoring to stock,I could only use WIFI for internet on my phone
Stock is okay, but is a little too slow.I miss you JB.
Crap you Samsung for making your own custom chips instead of using normal Qualcolmm chips.
Click to expand...
Click to collapse
Let me qualify by saying I've very limited with APN other than stock at&t.
However, I don't see any reason why with the CORRECT APN, G,B ICS or JB would handle it any differently.
It's possible that there is some sort of toggle that may be turning off your mobile data.
Try a Google Play data toggle like "dataswitch" to see if it can turn on your data.
or under Settings/Data - make sure mobile data is ON
Thanks!
Switching mobile data in settings makes no difference unfortunately
I'll do an ultimate flash on cm JB 4.2.2 with gapps 12/12 signed and see in the coming days
Fullmetal Jun said:
Thanks!
Switching mobile data in settings makes no difference unfortunately
I'll do an ultimate flash on cm JB 4.2.2 with gapps 12/12 signed and see in the coming days
Click to expand...
Click to collapse
Okay I did some research and found an alternative APN setting. Flashed cm 4.2.2 and it worked again.
Cheers qkster
Related
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Dravyy said:
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
Click to expand...
Click to collapse
Before flashing jelly bean roms you need to flash a sense rom then do full wipe and install cm10 or aokp..
jspidey said:
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Svenomous said:
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Click to expand...
Click to collapse
Every device has its own nuances, as do various ROMs. So I'd advise posting this in the forum specific to your device.
Still no data connection.
I am having the same issue with my AT&T One X phone.
The phone was running 2.20 before it was unlocked/rooted. Installed TWRP, was a noob and forgot to save a backup, fastbooted the boot.img, flashed AOKP and CM10 successfully. With both of these ROMs, I could not get internet to work via cellular connection. I have tried everything with the APNs (even had AT&T help me setup APN settings) and still no mobile data connection. I can still receive/send SMS/calls, use bluetooth and wifi, just no mobile internet.
I'm not entirely sure what to do next. I attempted to go back and flash the UrDroid 4.1 Stock Sense ROM, but after fastbooting it's boot.img and attempting to flash with TWRP, I got a signature verification failure. Got scared and restored back to AOKP (I remember to make a backup this time.)
Thoughts? Sorry for being a noob.
Are you in an LTE area?
redpoint73 said:
Are you in an LTE area?
Click to expand...
Click to collapse
I am in a "4G" area (HSPA+) but I am also a hour drive away from LTE. I have tried APNs for both, but AT&T recommended I stick to the LTE APN. AT&T had me go to Settings->More->Mobile Networks->Network Operators and the phone just sat there searching without finding anything. I just did that above operation again and it found AT&T and I selected it. It spins on "Registering on AT&T..." for a few minutes and eventually errors out "Cannot register on this network at this time."
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
I've had data problems on certain ROMs, where turning off LTE got the HSPA+ connection working.
In that case, it was probably a base of build.prop not playing well with AT&T's network. Although I would think the ROMs you mentioned would have these issues worked out at this point (and for some time now).
redpoint73 said:
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
Click to expand...
Click to collapse
When I switch to "GSM/WCDMA Auto", it immediately switches itself back to the LTE setting. This is concerning.
I have been using an ICS ROM (PrimoS v4.1) on my Desire S for some time with no problems, but recently have tried flashing a number of JB ROMs (e.g Andromadus, CM10 and JellyTime). I have found that when using any of these JB ROM's, I am unable to get a data connection and the APN list is blank. Despite many attempts to add APNs manually or by use of APN backup apps, I have failed to add an APN to the list.
Do I need to update the radio to solve this problem? I never did this when going from original HTC Gingerbread to the ICS ROM.
Please excuse the ignorance on this subject. I've read somewhere that there is a danger of bricking the phone when flashing radios, hence my reluctance to try without good reason!
I live in the UK and use Virgin Mobile.
Current radio is: 20.281.30.085AU_3805.06.02.03_M
All help appreciated - I've had a tantalising glimpse of the wonders of Jelly Bean and I'm desperate to get my data connection working!
TIA
I can't say whether changing radios will fix your problem. I use Radio 20.4801.30.0822U_3822.10.08.04 on CM10 and have no problems.
Sent from my Desire S
BillGoss said:
I can't say whether changing radios will fix your problem. I use Radio 20.4801.30.0822U_3822.10.08.04 on CM10 and have no problems.
Sent from my Desire S
Click to expand...
Click to collapse
Thanks for the reply BillGoss.
I took the plunge and updated my Radio to 20.4801.30.0822U_3822.10.08.04 with no problems. My phone continues to work fine with the PrimoS (ICS) ROM, but when I flashed JellyTime, still no APN's and I was unable to create one, hence I can't connect to the 3G network. D'oh!
Correct me if I'm wrong but with ICS you don't have the probelm and with JB you have the problem
that you have no and can not set the APN values, Q, dit you have a clean ROM installed.
I had this problem once when I tested a ICS version with sence 4. Later when I installed a CM10 version
I had no APN so I did a factory reset an de problem was gone. To be sure I wiped al the data on my device
and restored a earlyer nandroid backup. Later I tested a lote of ROMS but so far I don't have the APN issue yet.
HypnoCondor said:
Correct me if I'm wrong but with ICS you don't have the probelm and with JB you have the problem
that you have no and can not set the APN values, Q, dit you have a clean ROM installed.
I had this problem once when I tested a ICS version with sence 4. Later when I installed a CM10 version
I had no APN so I did a factory reset an de problem was gone. To be sure I wiped al the data on my device
and restored a earlyer nandroid backup. Later I tested a lote of ROMS but so far I don't have the APN issue yet.
Click to expand...
Click to collapse
Yes HypnoCondor, I always do a full wipe before flashing the ROM. I've now done a ot of Googling and trawling XDA threads and have found that the issue seems to be confined to CyanogenMod-based ROMS, not specifically CM10 and covering a lot of different phones. I'm not techie enough to fully understand, but it seems that CM is not registering the SIM card properly and hence the APN list is always blank and can't be edited/saved manually.
What's particualrly confusing is that I recently flashed the CM10-based CyanogenMod 10 Beta Builds [4.1.2][ANDROMADUS 3.x][Frontcam] ROM (http://forum.xda-developers.com/showthread.php?t=1776256) and much to my surprise it worked! My APN list was populated and all was fine. Unfortunately , after rebooting the phone, the APN's were gone and I've been unable to get them back, despite trying every trick in the book gleaned from XDA users with similar problems.
This is very frustrating, because I really love this ROM
Looks like I'll end up going back to the PrimoS (non-CM, ICS) ROM so that I can get my data connection back when I'm away from WiFi. That's a real bummer, but I'm damned if I've been able to find a fix for this issue.
Just for future reference: being unable to set APN has nothing to do with radio and has everything to do with the ROM you're using. But you've already found that out yourself.
Jack_R1 said:
Just for future reference: being unable to set APN has nothing to do with radio and has everything to do with the ROM you're using. But you've already found that out yourself.
Click to expand...
Click to collapse
Thanks Jack_R1. My final plan is to try replacing the SIM card - should receive it in a couple of days.
Phosbrom said:
Thanks Jack_R1. My final plan is to try replacing the SIM card - should receive it in a couple of days.
Click to expand...
Click to collapse
Phosbrom I'm on Virgin and the JellyBean roms you mentioned work great on our service. I'm sure you'll enjoy using them when your new sim arrives :good:
The Problem/Symptoms: I've been running a version of last CM10.2 for the past year. On February 20th, I was able to send a single SMS and then subsequent texts failed. I could still receive SMS, send/receive MMS, send/receive calls and send/receive data. If I toggle airplane mode/reboot I can send another SMS and then subsequent sms are undeliverable.
What wont work: Flashing to CM11 does not change the issue.
Disabling Voice+ does not change the issue
Factory Reset does not change the issue
Workarounds: Toggle Airplane mode
Switching Mobile Network to CDMA only (not permanent)
Change your number to a different area code
Going back to a Touchwiz based ROM
The Solution
net-cat said:
Alright. I think I've refined my process and it results in having a newer radio as well as not having to ODIN things or do dd commands.
NOTE: This isn't fully tested. When I did this, my phone wasn't showing the issue. I did this after doing my original procedure, but the GPS stopped working after I updated the radio from VRALF2 to VRBMB1. You shouldn't need to do the original procedure for this to work, but I haven't tested that. At the very least, the original procedure still works and this one can be used afterward if you need the newer radio. (GSM support...)
Ideally, we'll want to get to a procedure that doesn't use ODIN or dd. Hopefully this is a step in that direction.
Requirements:
A rooted stock ROM of the VRUCML1/4.3 vintage. I used Scott's Stock Rooted Knox Free VRUCML1 - 4.3 - DeOdex - V2. (Thread here.)
VRBMB1 AIO Flash, available here. (Thread here.)
I'm going to assume you know how to boot into and use recovery.
NOTE: Do NOT let the stock ROM install any updates.
Starting with my CM11 M3 install, I did a nandroid backup. (Recovery is CWM Touch 6.0.4.5, but I doubt that matters.)
Flash the VRBMB1 AIO.
Wipe data and cache.
Flash the stock ROM.
Boot into the stock ROM.
The reprovisioning seems to happen as a part of ROM's initial boot up.
Send a few text messages to test. (I sent them to Twitter.)
Launch the Maps application, turn on your GPS and let it get a lock. If you don't, when you boot back into your ROM, you probably won't have working GPS.
This would be a good time to back up your IMEI if you haven't already done so.
Reboot into your recovery, wipe data/cache and restore your nandroid backup.
At this point, you'll be running your preferred ROM with a less archaic radio than my previous post.
DO NOT UPGRADE YOUR RADIO. The moment I upgraded my radio, the problem came back!
CM11 M3 will work just fine with the old radio. I've rebooted several times over the last few hours and it still works fine. (Time will tell if it's a long term fix or not.)
Click to expand...
Click to collapse
buffal0b1ll said:
I put a MB1 aoi zip in my dropbox for you. It's from invisblek.org which isn't working now for some reason https://www.dropbox.com/s/7b1aqspo40fxl00/VRBMB1.aio.zip
Click to expand...
Click to collapse
Notes: There are threads for the S4 with this identical problem. All updated information I have seen is listed above. If anyone knows more please post as I am going to keep this updated. If this does/doesn't work for you please post and let the community know. Feel free to hit the thanks button if it works for you.
This exact thing happened to me. I tried many fixes with no luck. After hours of hacking around in settings, I found a ROM of verizon's 4.3 OTA update and flashed that through ODIN. My texts are working just fine again. Kind of a cheap method of fixing my problem. I wish I could have taken more time to find a fix, but I needed to be able to communicate with people that day.
Stock 4.3 is kind of lame:
-4.3 is killing my battery faster than ever. CM11 had me going for days without charging and now I've needed to charge everyday.
-Stock 4.3 is laggier/slower than CM11. It tends to stutter for me.
-4.3 came with a new boot loader which no developers have exploited to install custom ROMs yet. This leaves you stuck with Verizon bloat. I hate all these damn apps. Going to try to safe root & see if I can't do some cleanup work.
Enough ranting. Just wanted to let you know you are not alone with this problem. Hopefully someone will figure it out. Missing my cyanogen mod already
It seems this problem has happened on other phones also running Cyanogenmod. I found this thread http://forum.xda-developers.com/showthread.php?t=2654822
It looks like the symptoms have all showed up at the same time approximately. (February 19th, 2014). Still looking for a better answer than going back to stock TW...
Edit: And another thread http://forum.xda-developers.com/showthread.php?t=2659280 This one suggests its all AOSP roms. But it seems many people are unaffected... I don't understand why/how.
edit2: and another thread http://forum.xda-developers.com/showthread.php?p=50627899
Just looking for more info
Sent from my SCH-I535 using Tapatalk
Dex954 said:
Just looking for more info
Sent from my SCH-I535 using Tapatalk
Click to expand...
Click to collapse
SO this is the current status that I know.
The problem happens for everyone with a 570/717 area codes + on verizon + running Cyanogenmod (possibly any AOSP) + while connected to LTE which started on Feb 20th (the day before KitKat came out offically).
Current Workarounds:
Switch to TouchWiz based Roms
Switch your radios to be CDMA only
Call verizon and switch your number to a different area code
I know the workarounds all suck but that all I know for now. Switching SIM cards won't work. If I anyone knows anything more please feel free to let me know.
I'm 717
Sent from my SCH-I535 using Tapatalk
I have still be unable to find a solution for this issue. I think I have to give up on CM and go back to a TW based. If I hear anything new I'll update the post but I don't have the time to be wasting on my phone at the moment. If someone finds or hears of a fix or if it magically goes away as it started, please post it.
And spread the word if there are any other ROMs that this is occurring on. It seems the pool of those affected is just too small.
I have already had to give up. Been running slows tw. I take it Verizon didn't get back to you?
Sent from my SCH-I535 using Tapatalk
Here is my thread guys. Same issue. I am gonna get on the fog horn with some Verizon buddies I have http://forum.xda-developers.com/showthread.php?t=2662658
DreamFX said:
Here is my thread guys. Same issue. I am gonna get on the fog horn with some Verizon buddies I have http://forum.xda-developers.com/showthread.php?t=2662658
Click to expand...
Click to collapse
Godspeed my friend.
Anyone try aosp to see if fixed yet?
Nope. Still having issues. Tried gummy and cm. TW based roms are fine. In 717.
capt730 said:
Nope. Still having issues. Tried gummy and cm. TW based roms are fine. In 717.
Click to expand...
Click to collapse
I try every other day. 717 for me. Remaining hopeful it's fixed... One day...
What gapps are you using? I have been using the PA 0Day gapps. Going to try the gapps package from invisblek and see if that makes a difference.
Sent from my GT-N5110 using XDA Premium 4 mobile app
capt730 said:
What gapps are you using? I have been using the PA 0Day gapps. Going to try the gapps package from invisblek and see if that makes a difference.
Sent from my GT-N5110 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It won't. It isn't software dependent. People who had already flashed builds prior to the 20th magically had issues starting on that date, so it isn't a problem with new builds, and it only happens to those in the 717-570 areas so it isn't a problem with AOSP code. It has to be a Verizon network issue, I just have no idea how.
Sent from my SCH-I535 using XDA Premium 4 mobile app
I have run TW base roms almost 100% of the time. Prior to the 20th, I had flashed cm11 3 or 4 times to see if camera worked and was never on it more than a day. I also had issues where music in my sd card wasn't being found but it was fine on TW. Could it be the unified build causing an issue? I have no issues on Clean Rom 8, wicked sensations or old and slows stock based roms.
*Edit* I have installed Gummy and CM 11 with PA Mini Modular apps and the CM Gapps from Invisiblek, let it set up. I then shut it down, removed battery and sim and then put everything back in and still the same issue. 1st text message goes through, then the rest after that just fail. I tried regular message app, Hangouts and Verizon messaging. All same results. I go back to my CR8 backup and all is fine. It's bizarre because everything else seems to be working fine and is very fast & smooth.
capt730 said:
I have run TW base roms almost 100% of the time. Prior to the 20th, I had flashed cm11 3 or 4 times to see if camera worked and was never on it more than a day. I also had issues where music in my sd card wasn't being found but it was fine on TW. Could it be the unified build causing an issue? I have no issues on Clean Rom 8, wicked sensations or old and slows stock based roms.
*Edit* I have installed Gummy and CM 11 with PA Mini Modular apps and the CM Gapps from Invisiblek, let it set up. I then shut it down, removed battery and sim and then put everything back in and still the same issue. 1st text message goes through, then the rest after that just fail. I tried regular message app, Hangouts and Verizon messaging. All same results. I go back to my CR8 backup and all is fine. It's bizarre because everything else seems to be working fine and is very fast & smooth.
Click to expand...
Click to collapse
It can't be an issue with the unified builds because going back and flashing an older build yields the same results. If you're willing to make the trade-off, you can set your phone to CDMA only. Texts will send, but you'll have no 3G or 4G.
I'm ok with using CR8, Beans or other stock roms. Can't see paying for LTE and not using it lol. Was curious to see how aosp has been coming along and sms was really the only issue I was having.
Obaterista93 said:
It can't be an issue with the unified builds because going back and flashing an older build yields the same results. If you're willing to make the trade-off, you can set your phone to CDMA only. Texts will send, but you'll have no 3G or 4G.
Click to expand...
Click to collapse
I was using masta's 10.2 build for over 6 months without even thinking about flashing new builds. The 20th is when the problem started for me. Upgrading to CM11 didn't change it. I just installed Hyperdrive and everything is back to normal.
I wish I could go back to CM but it just doesn't work in this area. And I don't know what I can do about it,
Whisk_33 said:
I was using masta's 10.2 build for over 6 months without even thinking about flashing new builds. The 20th is when the problem started for me. Upgrading to CM11 didn't change it. I just installed Hyperdrive and everything is back to normal.
I wish I could go back to CM but it just doesn't work in this area. And I don't know what I can do about it,
Click to expand...
Click to collapse
Basically. I've talked to a few friends who have worked for carriers and stuff, and everyone is stumped as to how something like this can even happen. Luckily I'm pretty much always in WiFi so I can survive on CDMA only.
After upgraded my OPO to CM 12.1 + AK Kernel, everything going fine until yesterday, mobile data suddenly stop working, APN setting look fine, trying switch it from LTE to 3G to 2G and still not work.
Trying to use another L room, but still no luck
Then I restore my OPO back to CM 11S through TRWP and mobile data work again, it's make me sick.
Is there any solution to make Mobile Data work again on Lollypop ?
thank you
The same thing is happening on mine phone too. It looks like is associated with the WIFI issues that had been reported on android 5.0 +.
I even got people sending emails asking me why my phone is disconnected.
This has been posted on the One Plus forum, but they are not even replying to my messages.
momoclax said:
After upgraded my OPO to CM 12.1 + AK Kernel, everything going fine until yesterday, mobile data suddenly stop working, APN setting look fine, trying switch it from LTE to 3G to 2G and still not work.
Trying to use another L room, but still no luck
Then I restore my OPO back to CM 11S through TRWP and mobile data work again, it's make me sick.
Is there any solution to make Mobile Data work again on Lollypop ?
thank you
Click to expand...
Click to collapse
Try flashing the CM11 05Q modem. Fixed my WiFi issues.
Do a search as I cannot link the modem yet.
https://forums.oneplus.net/threads/cos-12-potential-wifi-fix.304979/
Is anyone running the most current snapshot? I installed it and lost reliable mobile data. It looked promising at first but even after a factory reset with a sense ROM I couldn't resolve it.
To start, I'd just like to know if it's possible with this release.
karunamuni said:
Is anyone running the most current snapshot? I installed it and lost reliable mobile data. It looked promising at first but even after a factory reset with a sense ROM I couldn't resolve it.
To start, I'd just like to know if it's possible with this release.
Click to expand...
Click to collapse
Im running that snapshot on a M8 w/ Verizon. I had to go into Mobile Networks -> Access Point Names ->Reset to default; in order for LTE to work. I was only getting 3G.
I continue to experience mobile data issues periodically & have to do the previous steps to get it to work again.
I did a dirty flash from the stock ROM, so I may try wiping everything & flashing to this build again. (or trying the latest CM 13 nightly.)
I hope this helps.
Thanks for confirming my experience. I'm wondering if the CM developers are testing with Verizon. My experience with their most recent builds has been pretty bad- especially with mobile data. It's always a bummer when older versions work better than newer ones.
I am running the CM13 nightly builds based on android 6.0.1 and so far they have been running great. I have specifically flashed the 12-25-15 & 12-26-16 builds. The only issue I have had is that occasionally the WiFi does not want to connect after a reboot, but toggling airplane mode fixes it.