I have been using an ICS ROM (PrimoS v4.1) on my Desire S for some time with no problems, but recently have tried flashing a number of JB ROMs (e.g Andromadus, CM10 and JellyTime). I have found that when using any of these JB ROM's, I am unable to get a data connection and the APN list is blank. Despite many attempts to add APNs manually or by use of APN backup apps, I have failed to add an APN to the list.
Do I need to update the radio to solve this problem? I never did this when going from original HTC Gingerbread to the ICS ROM.
Please excuse the ignorance on this subject. I've read somewhere that there is a danger of bricking the phone when flashing radios, hence my reluctance to try without good reason!
I live in the UK and use Virgin Mobile.
Current radio is: 20.281.30.085AU_3805.06.02.03_M
All help appreciated - I've had a tantalising glimpse of the wonders of Jelly Bean and I'm desperate to get my data connection working!
TIA
I can't say whether changing radios will fix your problem. I use Radio 20.4801.30.0822U_3822.10.08.04 on CM10 and have no problems.
Sent from my Desire S
BillGoss said:
I can't say whether changing radios will fix your problem. I use Radio 20.4801.30.0822U_3822.10.08.04 on CM10 and have no problems.
Sent from my Desire S
Click to expand...
Click to collapse
Thanks for the reply BillGoss.
I took the plunge and updated my Radio to 20.4801.30.0822U_3822.10.08.04 with no problems. My phone continues to work fine with the PrimoS (ICS) ROM, but when I flashed JellyTime, still no APN's and I was unable to create one, hence I can't connect to the 3G network. D'oh!
Correct me if I'm wrong but with ICS you don't have the probelm and with JB you have the problem
that you have no and can not set the APN values, Q, dit you have a clean ROM installed.
I had this problem once when I tested a ICS version with sence 4. Later when I installed a CM10 version
I had no APN so I did a factory reset an de problem was gone. To be sure I wiped al the data on my device
and restored a earlyer nandroid backup. Later I tested a lote of ROMS but so far I don't have the APN issue yet.
HypnoCondor said:
Correct me if I'm wrong but with ICS you don't have the probelm and with JB you have the problem
that you have no and can not set the APN values, Q, dit you have a clean ROM installed.
I had this problem once when I tested a ICS version with sence 4. Later when I installed a CM10 version
I had no APN so I did a factory reset an de problem was gone. To be sure I wiped al the data on my device
and restored a earlyer nandroid backup. Later I tested a lote of ROMS but so far I don't have the APN issue yet.
Click to expand...
Click to collapse
Yes HypnoCondor, I always do a full wipe before flashing the ROM. I've now done a ot of Googling and trawling XDA threads and have found that the issue seems to be confined to CyanogenMod-based ROMS, not specifically CM10 and covering a lot of different phones. I'm not techie enough to fully understand, but it seems that CM is not registering the SIM card properly and hence the APN list is always blank and can't be edited/saved manually.
What's particualrly confusing is that I recently flashed the CM10-based CyanogenMod 10 Beta Builds [4.1.2][ANDROMADUS 3.x][Frontcam] ROM (http://forum.xda-developers.com/showthread.php?t=1776256) and much to my surprise it worked! My APN list was populated and all was fine. Unfortunately , after rebooting the phone, the APN's were gone and I've been unable to get them back, despite trying every trick in the book gleaned from XDA users with similar problems.
This is very frustrating, because I really love this ROM
Looks like I'll end up going back to the PrimoS (non-CM, ICS) ROM so that I can get my data connection back when I'm away from WiFi. That's a real bummer, but I'm damned if I've been able to find a fix for this issue.
Just for future reference: being unable to set APN has nothing to do with radio and has everything to do with the ROM you're using. But you've already found that out yourself.
Jack_R1 said:
Just for future reference: being unable to set APN has nothing to do with radio and has everything to do with the ROM you're using. But you've already found that out yourself.
Click to expand...
Click to collapse
Thanks Jack_R1. My final plan is to try replacing the SIM card - should receive it in a couple of days.
Phosbrom said:
Thanks Jack_R1. My final plan is to try replacing the SIM card - should receive it in a couple of days.
Click to expand...
Click to collapse
Phosbrom I'm on Virgin and the JellyBean roms you mentioned work great on our service. I'm sure you'll enjoy using them when your new sim arrives :good:
Related
Hi all,
A week ago I bought a brand new Desire S and installed latest CM 7.1 stable following the guide on cyanogemod Desire S Wiki using revolutionary 0.4pre4. Everything was smooth and nice, I flashed ROM and GAPPS and my phone is working absolutely perfectly... but there is one little problem...
I am using Desire to fetch my mails from 2 mailservers using IMAP every 30 mins. But when the phone is switching between network modes i.e. HSDPA -> EDGE or EDGE -> GSM or any other way, I am disconnected from operator network for about 10 seconds until the network mode changes and everything is fine after that, until there is another network mode switch.
This happens for me about 10 times a day, so my phone sometimes appears that It is turned off for people who want to call me. Immediately after connecting to network I get a missed call SMS from my operator.
Interesting thing is, that when I disable email fetching, disable background data transfer and disable network data, the phone works fine without "blackouts".
Can someone help me with this problem? Maybe a radio issue?
Some more info:
ROM: Cyanogenmod 7.1.0 Desire S
Recovery: Revolutionary CWM v4.0.1.4
HBOOT: 6.98.1002
Kernel: 2.6.35.14-cyanogenmod+ [email protected] #1
Radio: 20.28I.30.085AU_3805.06.02.03_M
There is a newer radio-file online.
Maybe it's solving your problem.
I'm using MIUI and never had such problems, but i'm interested in flashing CM, so please report if the problem is gone by flashing newer radio!
Which radio version are you using?
Today I am testing 2G only switch so I am on EDGE data only.
Flashing radios is safe......, but a bad radio flash will instantly brick your phone.
You are using 1.47.401.4 radio, try updating to the 2.10.401.5 one.
Thanks for reply.
Shoud I flash something else with the radio?
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Another I have is ftom OTA update zip file OTA_Saga_S_HTC_Europe_2.10.401.8-1.47.401.4_release_225210fmxlt12djw1sr7y5.zip where is one radio.img in formware.zip file too - version unknown
So Which one to flash?
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
MyroLM said:
Shoud I flash something else with the radio?
Click to expand...
Click to collapse
no need
MyroLM said:
I have 20.4801.30.0822U_3822.10.08.04 downloaded from cmw.22aaf3.com
Click to expand...
Click to collapse
this file is what ur looking for! check md5-checksum before flashing!
MyroLM said:
and if so, which method should I use to flash radio? The Android SDK one or the ZIP + Bootloader one?
Click to expand...
Click to collapse
Both will work, i'm using method by using bootloader normaly
Strangely I had the same issues as you on Endymion.
Then I updated radio to the latest.
It worked well.
Then I went to CM7. It was fine for a while, but now I'm losing signal with no 3G bars and its not switching automatically to 2G like it should when It has no 3G signal!
EDIT:
After really reading your post, I realise my issue is no way like yours! Yours seems really bad. Update your radio.
-------------------------------
Sent from my HTC Desire S
So, here we go with the results
I flashed 20.4801.30.0822U_3822.10.08.04, md5sum checked OK, update sucess, but phone with no signal...
I flashed 20.48.30.0822U_3822.09.08.20, md5sum checked OK, update sucess, but phone with no signal again...
I flashed 20.28I.30.085AU_3805.06.02.03 back, md5sum checked OK, update sucess, but phone with no signal again...
... what now ... ?
After each flash wiped cache and Dalvik...
in your telephone-info there is shown the new radio after every flash?
do you have removed the batterycover, because there is integrated the antenna of your device!
mouzzza said:
in your telephone-info there is shown the new radio after every flash?
Click to expand...
Click to collapse
Yes, correct number every time.
mouzzza said:
do you have removed the batterycover, because there is integrated the antenna of your device!
Click to expand...
Click to collapse
No, the cover is at its place where it should be. Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now.
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
MyroLM said:
Somehow I did the trick and I am back online with 20.28I.30.085AU_3805.06.02.03 on 2G only for now
Click to expand...
Click to collapse
in your area 3g is actually available?
may it helps to go outside, to find your net for the first time!
did you set an accesspoint for 3g?
may you have to set automatic settings, rather than 3g/2g-only?!
MyroLM said:
I read somwhere in the forum that ENG HBOOT is required for new radios... Are you sure I dont need to flash eng hboot it before new radio ??
Click to expand...
Click to collapse
using same hboot as you, never had problems on flashing radio-files!
yes, in my area there is 3g, when I turn off 2g only switch there is a problem described in my first post, so i am on 2g for now just to keep phone connected to network.
main problem is when i am driving and the phone is switching network modes.
so I give 20.4801.30.0822U_3822.10.08.04 today another chance, try to flash if again.
but i am woried about stucking on HTC logo after flash :-( and brick it.
MyroLM said:
but i am woried about stucking on HTC logo after flash :-( and brick it.
Click to expand...
Click to collapse
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
I have the same or a very similar problem. I have the stock rom.
I already had 3 different desire s motherboard's and 2 different display's.
The first Desire S i had, with android 2.3.3, had a excellent signal. Due some problems i had, the phone bricked and had to go to HTC to repair.
HTC replaced the motherboard and update the version of the android to 2.3.5 and ever since the signal caption, the signal switch was working very bad.
The phone went to a second repair because of this, new phone, and again with android 2.3.5. The problems persisted.
I also tested with different SIM cards, from different mobile operators.
So, my conclusion is either android 2.3.5 or this new versions of Desire S have problems with signal caption and signal switch.
So as you, i need some help with this issue!
mouzzza said:
i already had the problem for several times, and i also pulled out the battery (you shouldn't do that)!
only had to boot into bootloader, start recovery, wipe all partitions, flash rom and was having fun again with my device
this thread could help you, if really stuck on HTC logo
For your real problem on loosing the signal, did you ever tried out using actual stock rom, or another custom one like MIUI?
i used MIUI from 2010-08 till yesterday, now trying out CM7.1 for some days
Click to expand...
Click to collapse
But when I reboot to recovery it will flash the radio again I think.
i hate stock roms, and dont like MIUI design That is why I am using Cyanogen
Anyway if I use 2G only switch, the phone is stable as rock both calls and data transfer.
EDIT: OK, flashed 20.4801.30.0822U_3822.10.08.04 sucessfully, signal OK, I will see what happens whet metwork mode switches
@Green Hawk:
give us more information about your device please, which radio you're using? Did they flash actual radion also?
@MyroLM:
report if the problem is still there or it's gone with flashing the rom
I am still testing new radio, but looks good Give me some days let you know...
Hi All,
I have a similar problem with the latest CM7.1 nightly builds (Reaper, jorgen2009). I never saw this with older CM7.1 versions, e.g. Nexx version, ICS, MIUI oder Endymion.
I have WLAN on and leave my house. Phone switches to 2G/3G..., so far so good. When I return home, The WLan sign in the status bar appears again, everything seems to be fine, but I have no connection. I get no data via WLan until I swicth WLan off and on again.
Radio is the latest from 2.10.401.5.
Best Regards
Wrapp
Had similar problems, upgrading to the latest radio helped. I got stuck on the HTC screen and I went through flashing RUU's and unlocking bootloaders back and forth... when the only thing that needs to be done is to wipe the cache.
Learned a lot about bootloaders though. But my warranty got void because i did the htcdev unlock... (Sorry for OT)
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Dravyy said:
Hi,
I recently decided to flash a jeallybean ROM since most of them are getting really great and we don't have any word on the official update. Unfortunatly, I'm now unable to get a data connection on my HOX. It's the rogers version which I unlocked and I'm now using on the Bell network. Before flashing, LTE worked fine with the stock sense ROM, but now I don't have any data at all.
ROMs I've tried :
AOKP, MIUI and CM10.
I've tried to : set the data connection to GSM only, nothing, to LTE only, nothing, to WCDMA only, nothing. I've tried all the APNs I've found (pda.bell.ca, pda2.bell.ca, inet.bell.ca). On AOKP it sometimes said "Error while searching for network". WiFi, texts and calls work fine.
If anyone could help me, it would be really appreaciated. Otherwise I'll just revert to Rogers ROM. Thanks alot!
Click to expand...
Click to collapse
Before flashing jelly bean roms you need to flash a sense rom then do full wipe and install cm10 or aokp..
jspidey said:
I cant offer any help, but I'm having a similar issue recently. I was on a nightly build of CM10 (from 10/06/12 I believe). I upgraded to a newer build (from 10/10) and I get no data over cell. I flashed it back and things were fine.
Click to expand...
Click to collapse
Sent from my HTC One X using xda premium
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Svenomous said:
I have the exact same problem with my SGS using the X-bean 3.0 rom.
What's the best solution? Is it because I used to Cwm?
Click to expand...
Click to collapse
Every device has its own nuances, as do various ROMs. So I'd advise posting this in the forum specific to your device.
Still no data connection.
I am having the same issue with my AT&T One X phone.
The phone was running 2.20 before it was unlocked/rooted. Installed TWRP, was a noob and forgot to save a backup, fastbooted the boot.img, flashed AOKP and CM10 successfully. With both of these ROMs, I could not get internet to work via cellular connection. I have tried everything with the APNs (even had AT&T help me setup APN settings) and still no mobile data connection. I can still receive/send SMS/calls, use bluetooth and wifi, just no mobile internet.
I'm not entirely sure what to do next. I attempted to go back and flash the UrDroid 4.1 Stock Sense ROM, but after fastbooting it's boot.img and attempting to flash with TWRP, I got a signature verification failure. Got scared and restored back to AOKP (I remember to make a backup this time.)
Thoughts? Sorry for being a noob.
Are you in an LTE area?
redpoint73 said:
Are you in an LTE area?
Click to expand...
Click to collapse
I am in a "4G" area (HSPA+) but I am also a hour drive away from LTE. I have tried APNs for both, but AT&T recommended I stick to the LTE APN. AT&T had me go to Settings->More->Mobile Networks->Network Operators and the phone just sat there searching without finding anything. I just did that above operation again and it found AT&T and I selected it. It spins on "Registering on AT&T..." for a few minutes and eventually errors out "Cannot register on this network at this time."
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
I've had data problems on certain ROMs, where turning off LTE got the HSPA+ connection working.
In that case, it was probably a base of build.prop not playing well with AT&T's network. Although I would think the ROMs you mentioned would have these issues worked out at this point (and for some time now).
redpoint73 said:
Have you tried switching off LTE by selecting "GSM/WCDMA Auto" in Settings?
Click to expand...
Click to collapse
When I switch to "GSM/WCDMA Auto", it immediately switches itself back to the LTE setting. This is concerning.
hello everyone, new here,,, I have been browsing the forums for quiet sometime now, and decided to register. I have a questions about certain ROM's. I current have a htc one x at&t hboot 2.20 ; ( it has the viper 2.20 installed everything is great, but like everyone else you want to try something new. I have flashed KingCobra1x and Calkulin's One XL v1.2, both of them will install and work, but the LTE will not. I have made sure APN's were right I have tried resetting APN's , wiping cache / dalvik , ect It is driving me nuts. I can usually figure things out! I also tried flashing the radios that the developer suggest. My guess it has something to do with the radios, What am I doing wrong!?!? thanks!
Do you know for certain you have lte in your area?
Sent from my HTC One X
ECEXCURSION said:
Do you know for certain you have lte in your area?
Sent from my HTC One X
Click to expand...
Click to collapse
Oh yeah, St Louis, it's working like a charm now on the viper rom right now..
I was now just reading the Calkulin's One XL post and I did do a full wipe, but I didnt flash the Calkulin's_FORMAT_ALL_for_One_XL.zip does that matter? lol
EDIT
worked! lol duh
I've started using his format for all whenever I switch from one ROM to another. I think it fixes a lot of problems people have, much like running an ruu.
Sent from my HTC One X
I've often had trouble getting AT&T's LTE up and running on certain ROMs. Don't really have the technical knowledge to say, but it seems to have to do with something in the AT&T APN besides what you can manually input in Settings (possibly build.prop). Manually entering the proper APN info does no good, as does wiping cache/Dalvik. I never got LTE going on KingCobra (but didn't stick with it for long).
Turge has an APN fix originally posted in his ViperXL thread (current versions of ViperXL should work fine), and that has fixed LTE in some cases. Particularly for older ViperXL builds and rooted stock ROMs (non-AT&T carriers, specifically 2.42).
No guarantees on it working. Do a nandroid before flashing, if you want to be safe.
http://forum.xda-developers.com/showthread.php?p=31136543&highlight=apn#post31136543
I didn't have any issues with LTE on Calkulin's ROM, but I haven't flashed the latest version (think I was on 1.1c). Did you keep user data between KingCobra and Calkulin's? You should always factory reset between different ROMs.
redpoint73 said:
I've often had trouble getting AT&T's LTE up and running on certain ROMs. Don't really have the technical knowledge to say, but it seems to have to do with something in the AT&T APN besides what you can manually input in Settings (possibly build.prop). Manually entering the proper APN info does no good, as does wiping cache/Dalvik. I never got LTE going on KingCobra (but didn't stick with it for long).
Turge has an APN fix originally posted in his ViperXL thread (current versions of ViperXL should work fine), and that has fixed LTE in some cases. Particularly for older ViperXL builds and rooted stock ROMs (non-AT&T carriers, specifically 2.42).
No guarantees on it working. Do a nandroid before flashing, if you want to be safe.
http://forum.xda-developers.com/showthread.php?p=31136543&highlight=apn#post31136543
I didn't have any issues with LTE on Calkulin's ROM, but I haven't flashed the latest version (think I was on 1.1c). Did you keep user data between KingCobra and Calkulin's? You should always factory reset between different ROMs.
Click to expand...
Click to collapse
Yes, I completely wiped my phone. The KingCobra I never got LTE never tried the fix yet, but on the Calkulin's ROM got it to work with his fix and I have noticed that the signal became weaker from the status bar, but it still read a - 85 RSRP (same signal strength with Viper) Im on the ViperRom now and it has full bars compared to the 2 or 3 that I get with the Calkulin's ROM..
Hello dear community,
I recently bought the Motorola Razr Maxx HD for use in germany as I live there and the handset is not available there.
Before buying the phone I made sure it was global ready. On stock rom 4.1.2 I had no issues getting a data connection, all I had to do was edit the APN manually. Happy that it worked I continued messing with my new phone by rooting, unlocking and flashing a costum firmware on the phone.
I tried Carbon rom nightly 27/07/2013 and a port of Vanilla RootBox, sadly both did not want to connect to my carrier after editing APN settings.
What did I forget to do?
Thanks in advance
Edit:
Solved the "issue" for me. Just flashed a xt925 cfw and there we go, network connectivity
A better solution is to flash a x926 rom and to remove/outline this part in the build.prop:
telephony.rilV7NeedCDMALTEPhone=true
Reboot and gsm/umts works.
iceeyes91 said:
Hello dear community,
I recently bought the Motorola Razr Maxx HD for use in germany as I live there and the handset is not available there.
Before buying the phone I made sure it was global ready. On stock rom 4.1.2 I had no issues getting a data connection, all I had to do was edit the APN manually. Happy that it worked I continued messing with my new phone by rooting, unlocking and flashing a costum firmware on the phone.
I tried Carbon rom nightly 27/07/2013 and a port of Vanilla RootBox, sadly both did not want to connect to my carrier after editing APN settings.
What did I forget to do?
Thanks in advance
Edit:
Solved the "issue" for me. Just flashed a xt925 cfw and there we go, network connectivity
Click to expand...
Click to collapse
One sure way to bork your radio is to mess with the band with a phone info app or *#*#4636#*#*. I am sure there other ways to do the same thing. Only fix is a full restore to stock.
aviwdoowks said:
One sure way to bork your radio is to mess with the band with a phone info app or *#*#4636#*#*. I am sure there other ways to do the same thing. Only fix is a full restore to stock.
Click to expand...
Click to collapse
I tried that and set the device to gsm only (and other) but there was no receiption nor would the phone recognize my sim card anymore.
The strangest thing was that the network settings kept crashing if I wanted to open them.
I googled a lot, searched in different forums but never found a solution. Then I read somewhere that someone flashed the gsm rom of his phone on his CDMA version and it worked and I thought well what could possibly go wrong as I have a more than one nadroid backup .
iceeyes91 said:
I tried that and set the device to gsm only (and other) but there was no receiption nor would the phone recognize my sim card anymore.
The strangest thing was that the network settings kept crashing if I wanted to open them.
I googled a lot, searched in different forums but never found a solution. Then I read somewhere that someone flashed the gsm rom of his phone on his CDMA version and it worked and I thought well what could possibly go wrong as I have a more than one nadroid backup .
Click to expand...
Click to collapse
No, a nandroid will not fix it. Something gets wrong that the restore cannot fix.
What is a : xt925 cfw? A full restore?
aviwdoowks said:
No, a nandroid will not fix it. Something gets wrong that the restore cannot fix.
What is a : xt925 cfw? A full restore?
Click to expand...
Click to collapse
No, with xt925 cfw I meant a rom like Cm 10.1 for the international model.
I too reverted back to a Rage HD 2.0 backup, as there are quite some sound issues with 4.2.2 roms and so far I have no problems with radio.
xt926
iceeyes91 said:
Hello dear community,
I recently bought the Motorola Razr Maxx HD for use in germany as I live there and the handset is not available there.
Before buying the phone I made sure it was global ready. On stock rom 4.1.2 I had no issues getting a data connection, all I had to do was edit the APN manually. Happy that it worked I continued messing with my new phone by rooting, unlocking and flashing a costum firmware on the phone.
I tried Carbon rom nightly 27/07/2013 and a port of Vanilla RootBox, sadly both did not want to connect to my carrier after editing APN settings.
What did I forget to do?
Thanks in advance
Edit:
Solved the "issue" for me. Just flashed a xt925 cfw and there we go, network connectivity
A better solution is to flash a x926 rom and to remove/outline this part in the build.prop:
telephony.rilV7NeedCDMALTEPhone=true
Reboot and gsm/umts works.
Click to expand...
Click to collapse
must flash via stock rom
i hope your problem solve must reflash mobile this file
VZW_XT926_4.4.2-KDA20.62-15.1_CFC_1FF.xml
Need some help for my device [T-Mobile] HTC ONE S (S4). I'm using in INDIA.
For the past 3 years i have used this phone in 3G network with out any issues. Last week i flashed a new ROM but after that i don't get 3G signal.
I tried a lot of ROM's and Radios but still it is not working. So i flashed the stock ROM and RADIO but still its not working. I understand the bands the T-Mobile uses differs but it was working fine before flashing a different ROM.
I don't know what to do.
So please if any one using the same do upload your ROM and RADIO and other things that influence the phone to work.
P.S: I posted in various threads and asking for help but i don't get any reply hence started a new thread so everyone like me can find it useful.
Thanks.
EDIT:
I flashed the Official T-Mobile JB RUU and my phone started to reboot after showing up the "preparing Phone Storage" (soft bricked)
Finally solved the issue:
I have flashed the official T-Mobile JB RUU after relocking the bootloader, S-ON, change CID- ********(Stock cid , In my case its T-MOB010).
Now i have a brand new phone working good.
Thanks to "xxgummyxx" (http://forum.xda-developers.com/showthread.php?t=1710781&page=2)
xcelent noobs said:
Need some help for my device [T-Mobile] HTC ONE S (S4). I'm using in INDIA.
For the past 3 years i have used this phone in 3G network with out any issues. Last week i flashed a new ROM but after that i don't get 3G signal.
I tried a lot of ROM's and Radios but still it is not working. So i flashed the stock ROM and RADIO but still its not working. I understand the bands the T-Mobile uses differs but it was working fine before flashing a different ROM.
I don't know what to do.
So please if any one using the same do upload your ROM and RADIO and other things that influence the phone to work.
P.S: I posted in various threads and asking for help but i don't get any reply hence started a new thread so everyone like me can find it useful.
Thanks.
Click to expand...
Click to collapse
No replies !!!!!!!
Look for a rom, for you telephone company, in the country you live now.
When you instal wipe everything (except SD card).
null0seven said:
Look for a rom, for you telephone company, in the country you live now.
When you instal wipe everything (except SD card).
Click to expand...
Click to collapse
thanks for the reply,
I tried it and still my radio gets error . voice quality gone to worst.
I tried to install a custom rom again without s-off and i succeded but my phone reboots occasionally and my radio disconnects from the network occasionally and do get it back i need to search for network.
Atleast all other things work good.
Im planning to try to flash my kernel with the official stock kernel downloaded from HTC .
Will post if that works.
Thanks again
Best voice quality is in stock rom!