I have an infuse that works great except for the fact that everytime I plug the usb into the phone it shuts off the phone. The phone is factory I have not altered it or anything. I have tried multiple cables and different ports on my laptop and desktop. The battery is stock like I said it only happens when you plug the usb cable up to the phone while the phone is in normal mode. It does not occur when in download mode or recovery. I just bought this off of ebay is this a simple fix or should I just send it back. Thanks in advance and be gentle this is my first post. If I posted in the wrong place my apologies.
Related
When I plug my USB cable into my computer and then into my phone the phone does not recognize the computer and vice versa. It will charge, but that is it. A few weeks ago I tried an AOKP rom which has "fast charge" I set this setting to be on to test it out and then turned it off. Ever since then I have not been able to transfer files with the cable plugged in, so I used AirDroid to wirelessly do it. I remember something in the warning about it, but I thought when you format/wipe and flash a new rom it corrects the issue. I have flashed a completely new rom since then and still nothing. Any help would be nice, thanks.
Try going back to stock through Odin or heimdal
Sent from my HTC PH39100 using XDA
How are you supposed to Odin/heimdall, if it doesn't connect even during download mode?
Sent from my SAMSUNG-SGH-I997 using xda premium
Lol didn't think of that...when I had my infuse I had the same problem with the stock USB cable...after a while data transfer stopped and it became a charge only cable...I would use my dads cable that worked perfect for data transfer...
So try a different USB cord or try a different USB port...
Sent from my HTC PH39100 using XDA
You can try this too
Hi, I faced this issue few times and tried several options like change cable/port/computer and worked.
One thing Recently i noticed when all of the above failed in my case is :- 1 Development->Uncheck the USB debug mode, 2. Check Mass Storage in USB connection setting. ( you need to unplug usb cable while doing it)
Now try connecting and give few minutes. If you can see the USB mass storage notification you are good to go. Go back and change the Debug mode as Checked.
It worked for me couple of times hope it may work for you too.
Cjohns8792 said:
When I plug my USB cable into my computer and then into my phone the phone does not recognize the computer and vice versa. It will charge, but that is it. A few weeks ago I tried an AOKP rom which has "fast charge" I set this setting to be on to test it out and then turned it off. Ever since then I have not been able to transfer files with the cable plugged in, so I used AirDroid to wirelessly do it. I remember something in the warning about it, but I thought when you format/wipe and flash a new rom it corrects the issue. I have flashed a completely new rom since then and still nothing. Any help would be nice, thanks.
Click to expand...
Click to collapse
Sounds like the dreaded USB port failure. Many Infuse users have gone through this as its a known issue. I returned mine and got a replacement via warranty.
Cjohns8792 said:
When I plug my USB cable into my computer and then into my phone the phone does not recognize the computer and vice versa. It will charge, but that is it. A few weeks ago I tried an AOKP rom which has "fast charge" I set this setting to be on to test it out and then turned it off. Ever since then I have not been able to transfer files with the cable plugged in, so I used AirDroid to wirelessly do it. I remember something in the warning about it, but I thought when you format/wipe and flash a new rom it corrects the issue. I have flashed a completely new rom since then and still nothing. Any help would be nice, thanks.
Click to expand...
Click to collapse
Hey There,
We had the same issue with many units and solved all by doing the following:
-Flashing the unit back to stock
-Performing a factory data reset after flashing(This is a must)
Note: Even though your device will not connect to the computer in PDA mode you should still be able to connect in download mode so it can be flashed with ODIN.(Unless if it's hardware related)
I have A Telus Fascinate (T959d)
Been Having a LOT of issues with ODIN not recognizing my Phone lately, Computer wont recognize my usb..
I have all SAMSUNG drivers, tried re-installing KIES no luck, still wont recognize phone..
tried 4 different USB cables, original all the way to new ones
I SCOURED the internet to find a solution, with no luck..
SO, Long story short, turns out from plugging and unplugging phone, the usb slot in the phone became loose or moved or something..
so, taking a SMALL flat screwdriver I placed it behind the "NIB" in the usb and pushed it towards the front of the phone, just a bit, careful not to BREAK IT!
Plugged my phone in and BOOM it worked..
After every 15-20 round of plugging and unplugging usb i have to do this, then it works great... absolutely no problems
Sorry if it's in wrong forum, but I figured it might help someone experiencing the same issues as me
I have a gt p3113 when I plug the charger into the wall an x comes over the battery. I can't update or flash anything because when I plug it into my computer it makes the sound that its connected but nothing else no driver installs or anything. I tried kies and it did not pick it up either. I booted it into download mode and plugged it into the computer and still nothing. I really need some advice
Does it still charge?
Sounds like a bad cable or possibly loose connector on the tablet, like all pins aren't connecting.
Hi
I have been having this issue for sometime now. I connect my Nexus to my laptop using the USB cable, and most of the time the screen starts acting up. Touch calibration is all wrong. When i click something, the actual button that is clicked is totally a different one. And sometimes it activates stuff on its own.
I have tried several stuff I found on google. Some said it had something to do with my home electricity not being grounded. I checked. It is grounded. Tried everything from flashing new roms to freshly starting from stock! Nothing seems to work!
Its like this thing have a mind of its own
Hi, if you use stock wall adapter, it's working correctly? Usually that is some kind bad electricity problem or that device where you plugged it causes problems.
Check usb cable. If it's not happening on LG cable and LG wall charger than it's your usb to pc cable problem
PS check other usb port and cable
Hello. I found my old Lumia 1020 and I decided to try and turn it on. However when I connected it to the charger all it does is flashing the middle button (windows logo) as what it normally does at the first few second of charging. So I tried connecting it to the laptop and same thing. Any ideas?
Hi, SavoTS
I guess the chances are that battery-juice might have dried up, possibility.
Have you tried Soft-Reset-ing your Lumia?
1. Press and hold the volume keys and power button together for 3-5 seconds.
2. The phone should soft-reset.
Please tell me what you've tried?
Also, The USB Port on your phone or the USB cable might be in bad-shape. This can cause the phone to not charge much and being stuck at the blinking Home button (Windows logo).
I have had bad USB port causing charging issues and giving me trouble while transferring data - I simply replaced it with a spare.
What have you tried so far?
jis.s said:
Hi, SavoTS
I guess the chances are that battery-juice might have dried up, possibility.
Have you tried Soft-Reset-ing your Lumia?
1. Press and hold the volume keys and power button together for 3-5 seconds.
2. The phone should soft-reset.
Please tell me what you've tried?
Also, The USB Port on your phone or the USB cable might be in bad-shape. This can cause the phone to not charge much and being stuck at the blinking Home button (Windows logo).
I have had bad USB port causing charging issues and giving me trouble while transferring data - I simply replaced it with a spare.
What have you tried so far?
Click to expand...
Click to collapse
The cable is totally fine because I use it to charge my other phone and it works fine. Tried the soft reset button combo and it didn't work. When I connected it to the pc it wasn't recognized. I haven't taken it apart but even if I do I don't have spare phones to take anything and use it.
SavoTS said:
The cable is totally fine because I use it to charge my other phone and it works fine. Tried the soft reset button combo and it didn't work. When I connected it to the pc it wasn't recognized. I haven't taken it apart but even if I do I don't have spare phones to take anything and use it.
Click to expand...
Click to collapse
i have this pc problem just charging not recognize. I gone changed replace new charging port and pc problem is solved it's working perfectly
If the battery is totally drained you should try a charging device, be patient and have the Lumia for hours on the loader. Also check the USB port, there may be tons of dust inside. Yes, it took me about ten minutes to clean a micro USB port, so just try it.
Best regards,
Joachim