I have a gt p3113 when I plug the charger into the wall an x comes over the battery. I can't update or flash anything because when I plug it into my computer it makes the sound that its connected but nothing else no driver installs or anything. I tried kies and it did not pick it up either. I booted it into download mode and plugged it into the computer and still nothing. I really need some advice
Does it still charge?
Sounds like a bad cable or possibly loose connector on the tablet, like all pins aren't connecting.
Related
my phone wont let me select what usb mode i want i have been in settings and put to mass storage and nothing rebooted nothin can someone help me my phone is in my sig
come on people who can help my my phone will charge via usb in lappy but i cant get into mass storage wont even pop up to let me pick what to do
never seen this before - although it only charging might indicate more problem with laptop than phone (ie laptop not presenting anything phone recognises)..
It sounds like your phone thinks its just plugged into a wall charger...
do you have any other symptoms?
none at all got a panasonic tv with 2 usb ports on it that i usualy plug it into that and use it as a mass storage device to play my movies from it but still the same guna try diffrent usb lead but i dont think it is my lead as it charges ok with it
didnt want to double post but only way to get it seen agen, seems like my mini usb port on phone is a bit lose now this should be covered by htc but i need to got stock again how can i do this with a faulty port.
I have A Telus Fascinate (T959d)
Been Having a LOT of issues with ODIN not recognizing my Phone lately, Computer wont recognize my usb..
I have all SAMSUNG drivers, tried re-installing KIES no luck, still wont recognize phone..
tried 4 different USB cables, original all the way to new ones
I SCOURED the internet to find a solution, with no luck..
SO, Long story short, turns out from plugging and unplugging phone, the usb slot in the phone became loose or moved or something..
so, taking a SMALL flat screwdriver I placed it behind the "NIB" in the usb and pushed it towards the front of the phone, just a bit, careful not to BREAK IT!
Plugged my phone in and BOOM it worked..
After every 15-20 round of plugging and unplugging usb i have to do this, then it works great... absolutely no problems
Sorry if it's in wrong forum, but I figured it might help someone experiencing the same issues as me
Hello there
Ive got a problem. I wanted to Root my SL101 (Firmware 4.0.3 Android) with Peri or THe 1 Click Solution. But the original usb cable only charged my device when I plugged in to power socket. BUt USB on PC didnt work. PC never found device, didnt search for driver and no "BLing" for USB device plugged in. So I ordered a new usb cable (not original, cause asus sl101 already 3 years old). The new cable worked. USB found on PC. Data transfer worked. Charinging over power socket worked, but no charging when connected to pc. When I enabled USB Debugging, it said "Device removed" and then "device started". But there was no deivce seen on computer. No "internal storage". So there is no possibility to transfer data and Root won't start cause it doesnt find device. I installed all driver (ADB driver, also tried Asus Pc Suite), but it doesnt work. Is my device broken or is it because of the cables? Are there any working cables on internet with better quality and supporting USB Debugging? The non original cable is from vhbw.
Is this a common problem with Asus Sl101? I searched for related problems. SOmeone also had problems with Asus original cable. It also charged plugged in to power socket but not with PC and Pc never fund USB conection, never searched for drivers. He ordered a new cable (original, cause his case was years ago) and it worked.
Any ideas how to get it work? Its not really important to root it though, but I wanted to buy Titanium Backup so I can save my apps, and I need root for it. There are f course plenty other apps needing root. Any advices?
Not sure about the data transfer error apart from lack of drivers, but the PC will not charge the tablet while it is running - at least for the TF101 anyway, the only way to get the PC to charge it is to either turn it off while its plugged into the PC and leave it overnight for trickle charge, or I think also if the tablet is in sleep mode, it will also trickle charge - but you have to use the main charger to get a fast charge into it - PC will only trickle charge
*Detection* said:
Not sure about the data transfer error apart from lack of drivers, but the PC will not charge the tablet while it is running - at least for the TF101 anyway, the only way to get the PC to charge it is to either turn it off while its plugged into the PC and leave it overnight for trickle charge, or I think also if the tablet is in sleep mode, it will also trickle charge - but you have to use the main charger to get a fast charge into it - PC will only trickle charge
Click to expand...
Click to collapse
First of all, thanks for answering. I tried it, but when I plug in USB, Asus SL101 turns on. I won't charge turned off. It turns on automatically when I plug in USB to charge. And when its turned on plugged in on PC USB, as I explained before, it won't charge.
Somene know where I can get a working cable? Maybe an original working one? Asus SL 101 is maybe 2 or 3 years old know. Shouldnt there be still original ones left in shops? Actually it doesnt have to be an original one. A working one is fine, too. (Working means for me: USB, Charging, USB Debugging). So anyone knows good stores/internet offers (amazon, ebay...) for sl101 cables? Cause I really dont know which one is a good one.
Plug it in to USB and then turn it off, you won't see it charging, it is a very very slow process when you charge from PC (If it works the same as the TF101) - leave it overnight plugged in and turned off
Sounds like your cable is working fine, you get a data connection with USB debugging - so data side of the cable works, and you get a charge when you plug it into the charger, so power side of it is working too
It's likely drivers stopping you using the media transfer mode
eBay would probably be your best bet if you want another one
asusparts.eu sell some stuff too - fits SL101
http://www.asusparts.eu/en/Asus-KIT-AC-TF101
Ya actually I didnt want to complain. The cable really works fine, but I cant root cause USB Debugging Mode is found by PC, but showing no storage icons on computer. So Root Software dont find device and no data transfer works while it is in debugging mode. Could it be because of my device? Actually it was from germany and the firmware also was DE. But for updates, I had to change it to WW code. Maybe its cause of firmware. I really dont know. Its strange cause for everyone it works, only for me it doesnt work. So original cable was to begin with not working on usb pc. So I hoped the fake one would work full. *sigh*
Thanks for the link. I searched for only the cable (on the given link) and I found it without adapter. But its a pity, Im in germany and if they send the cable to me, I have to pay 46$ for the cable. For US people its 25$ (cause they dont have to pay oversea sending costs). If its also not working, so it would be a problem.. even warranty is expensive (sending back ~20$).
Is there a way to downgrade SL101 from 4.0.3 to Firmware Version 3.2 without using USB Debugging and root?
Case closed, Watson (I always wanted to say that)
I found the error. The cable is working now and USB Debugging working, too. Root was successful. I opened device manager and deleted Asus Epad Sl101 driver and plugged sl101 in. So windows had to search for drivers and it installed the right drivers. I dont know why preinstalled ADB Drivers didnt work, but now everything works.
Thanks for your effort
Great, yea sounded like a driver problem, pleased you got it working :good:
Hi
I have been having this issue for sometime now. I connect my Nexus to my laptop using the USB cable, and most of the time the screen starts acting up. Touch calibration is all wrong. When i click something, the actual button that is clicked is totally a different one. And sometimes it activates stuff on its own.
I have tried several stuff I found on google. Some said it had something to do with my home electricity not being grounded. I checked. It is grounded. Tried everything from flashing new roms to freshly starting from stock! Nothing seems to work!
Its like this thing have a mind of its own
Hi, if you use stock wall adapter, it's working correctly? Usually that is some kind bad electricity problem or that device where you plugged it causes problems.
Check usb cable. If it's not happening on LG cable and LG wall charger than it's your usb to pc cable problem
PS check other usb port and cable
Hello everyone,
A couple of weeks ago my USB data connection on my OnePlus One has stopped working.
This means that no connection is even detected on any computer.
This is not a driver issue as the computer doesn't even notice anything has plugged in.
I think it's not a software/ROM issue because the same applies to fastboot mode and recovery mode - no data connection, no "usb plugged in" sound on any computer, no device showing up.
It's also not a cable issue, as the same cable works on other OnePlus One's and I've tried many different known-to-be-working cables.
More facts:
1) When plugging to a computer USB port - the battery icon shows the charging (lightning) symbol for a half a second and disappears and it won't charge. The computer, of course, doesn't see a usb device plugged.
2) When connecting to an AC charger - it charges just fine.
3) I already tried replacing the dock connector and flat cable unit with a new one - did not solve the issue, which means the dock connector is fine.
Any insight on this will be greatly appreciated!
Thanks!
purpleman2k said:
Hello everyone,
A couple of weeks ago my USB data connection on my OnePlus One has stopped working.
This means that no connection is even detected on any computer.
This is not a driver issue as the computer doesn't even notice anything has plugged in.
I think it's not a software/ROM issue because the same applies to fastboot mode and recovery mode - no data connection, no "usb plugged in" sound on any computer, no device showing up.
It's also not a cable issue, as the same cable works on other OnePlus One's and I've tried many different known-to-be-working cables.
More facts:
1) When plugging to a computer USB port - the battery icon shows the charging (lightning) symbol for a half a second and disappears and it won't charge. The computer, of course, doesn't see a usb device plugged.
2) When connecting to an AC charger - it charges just fine.
3) I already tried replacing the dock connector and flat cable unit with a new one - did not solve the issue, which means the dock connector is fine.
Any insight on this will be greatly appreciated!
Thanks!
Click to expand...
Click to collapse
By dock connector, you mean the USB port? Typically, this issue arises when the pins in the USB port get damaged. I don't know how the rest works out, but if that particular section of pins have to communicate throughout the rest of the motherboard, perhaps the trail responsible for that may have somehow gotten damaged. This is a clueless theory, someone with more electrical/motherboard experience can verify this.
What I do know is that once the micro USB port has been replaced on the phone, the issue should be fixed. It happened to an S3 I still have and I got it replaced by a friend. Sadly, it happened to me at the wrong time since i had wiped the entire OS and internal storage and was relying on my USB OTG cable and a flash drive which contained a rare rom called Sonic Open Kang Project (SOKP).
DO NOTE that this has also been an issue with me on the software side of certain devices. I uave had practically every flagship device out there and have come across a point where this happens on both stock and custom roms. My Optimus G did it on custom roms, and my Nexus 7 2012 occasionally on stock. There were other devices I cannot remember but sometimes factory resets or replacing the rom helps. However, you did state that the result is still the same on fastboot/recovery, so this seems to be more on the hardware side.
I replaced the USB connector (including it's flex cable) entirely. Did not solve the issue.
What else could be wrong?
try again
purpleman2k said:
I replaced the USB connector (including it's flex cable) entirely. Did not solve the issue.
What else could be wrong?
Click to expand...
Click to collapse
Try another computer. See if you can get any response from adb.
pbergonzi said:
Try another computer. See if you can get any response from adb.
Click to expand...
Click to collapse
I tried a lot of different computers and cables. None of them detect a USB connection.
Again, to clarify - they don't even SEE a usb device has been plugged in.
recovery?
purpleman2k said:
I tried a lot of different computers and cables. None of them detect a USB connection.
Again, to clarify - they don't even SEE a usb device has been plugged in.
Click to expand...
Click to collapse
You running a custom recovery? If so, see if you can toggle the mtp on/off reboot with each back to recovery. Use the tools to check the filesystem, permissions, etc.
Could pins have damaged?
Well, I did replace the USB connector with a new one, so if pins are damaged it's gotta be on the motherboard side, and I can think of no reason why that would ever happen.
As for recovery, I'm running TWRP and I'm not sure I understand what you meant I should try. Can you elaborate?
Thanks