Related
hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Root P3100 tab2
sajan1991 said:
hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Click to expand...
Click to collapse
I rooted my tab2 p3100 yesterday by the method posted on other web page but can't post link here as limitation to new user....
hem0101 said:
I rooted my tab2 p3100 yesterday by the method posted on other web page but can't post link here as limitation to new user....
Click to expand...
Click to collapse
did it worked ??? dunno wt went wronf for me
sajan1991 said:
hello all,,, i just tried to root my galaxy tab 2 7.0 p3100 .. but didnt worked,, i did as the instructions,, 1st _ used odin , then flashed cmw recovery ,,, evrythng went well,,, but it stuck on main screen only,, yes, it does goes to recovery mode too,, but not any furthur,,, jus shows logo "samsung galxy tab p3100" and goes off ,and again vibrates back to logo , and agia.. n,, same thing goes on,, nothing much,, is there a way to stop this and make bring back my tab to normal ???
plz ,,help me out
Click to expand...
Click to collapse
I learned how to root my tab(Samsung Galaxy Tab 2 7.0 GT-P3100) from the following website. Type "how to root samsung galaxy tab 2 7.0 GT-P3100" in Google and click the first link which is from android authority. It works well
To get the original firmware back type in Google "How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware tsar 3000" and click the first link.
Note:
From the firmware website, when u get ur device specific firmware there will be only one file but it says four files in the tsar website. Just use that one file with the PIT file in Odin and flash it to your tab using download mode in ur tab(there are more things in the website u need to do).
Press thanks if this helped u.
ssqw1 said:
I learned how to root my tab(Samsung Galaxy Tab 2 7.0 GT-P3100) from the following website. Type "how to root samsung galaxy tab 2 7.0 GT-P3100" in Google and click the first link which is from android authority. It works well
To get the original firmware back type in Google "How To Update Samsung P3100 Galaxy Tab 2 7.0 Firmware tsar 3000" and click the first link.
Note:
From the firmware website, when u get ur device specific firmware there will be only one file but it says four files in the tsar website. Just use that one file with the PIT file in Odin and flash it to your tab using download mode in ur tab(there are more things in the website u need to do).
Press thanks if this helped u.
Click to expand...
Click to collapse
thank you so much,, i'll hav it a try
sajan1991 said:
thank you so much,, i'll hav it a try
Click to expand...
Click to collapse
http://galaxytabblog.com/galaxy-tab-2-7-0-ics-root
Try fix.recovery posted there ..,
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Samsung s2 firmware upgrade error [SOLUTION]
greenland samsung said:
Problem after failed firmware update.
I tried to Update my Samsung Galaxy S2 (GT-I9100G) using Odin 1.85
the Phone shut down before finishing the update. At that point I could not start my S2 the only picture I got was a black screen with a phone a “!” in a yellow triangle and a computer. I tried to upload the firmware again with Odin but it failed every time. I tried using Kies but it could not find the phone. I googled the problem to find a solution that could work and I tried several solutions without luck. But at last i tried the following advice see link:
xda-developers - View Single Post - [Q] Firmare upgrade encountered an issue - Am i done for?
I downloaded the .tar file that was referred to:
KERNEL_XWLPO.tar
and Odin worked and this file was downloaded. The problem is that now i only get the start page with the text Samsung Galaxy S2 with a yellow triangle "!" in the bottom. I tried plugging it to the USB port on my computer but it can't see the phone anymore and Odin and Kies can't see it so I can't upload another firmware.
Please help, I am desperate
Click to expand...
Click to collapse
"Nothing to worry dude ,just follow these simple steps if you are using samsung s2 i9100 international version ,just download the Siyah kernel .tar file and flash it with odin ,you can just google siyah kernel to get the latest kernel and this will remove your firmware upgrade error and you can easily go into the download mode and can further upgrade the device by download jelly bean version of your related device .THANKS
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
http://support.t-mobile.com/docs/DOC-4484
Not your device but its should be similar. Hope it works for you.
No luck so far, is there no way to get past this screen?
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Sean_Seany said:
Not that I know of to be honest, You need to get into download/recovery .... Hopefully someone else more knowledgeable will come up with something !
How old is the tab ?
EDIT :
Will ODIN connect ... When you get that firmware error screen ?
Click to expand...
Click to collapse
No nothing, windows does recognize it and will install the driver. But Odin doesn't show anything happening and Kies just shows connecting. When you select emergency recovery in Kies it will stop trying to connect and bring up a dialog box asking for a recovery code. Apparently if the failure would have happened during a legit upgrade using Kies it would have generated an error code for recovery. Is there no way to repair this? Thought Samsung devices were suppose to be so easy to customize? Please help my son is pretty pissed.
Sent from my icrap 2 using Tapatalk HD
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
One thing. Always update your table with OTA or Kies. ODIN breaks the warrantie
Sent from my GT-P3110 using xda premium
Sweeeet ! Well played :good::good::good::good:
Same issue, different solution...
cruise350 said:
Update!!!
I was able to get odin to connect to tablet and I got cwm recovery installed so it no longer boots to the failed firmware screen and I can get into recovery. My question is which firmware do I install?? The tablet is a Galaxy Tab 2 10.1 P5113 wifi only. Is the P5113UEBLH3 firmware the correct one? It says it was provided by Cellular South which confuses me since the tablet is wifi only.
Update 2!!!!!!!!!!!!!!!!!!
Success!!! Got into download mode and was able to load the stock 4.04 firmware and life is good again. Thanks to all that helped.
Click to expand...
Click to collapse
I bricked my device from Odin while trying to revert from a CM10.1 nightly to stock JB. Device picked up in Odin, but would not flash... unless I reboot the device after I clicked start in Odin. Dunno why, but it loaded stock firmware on the error screen... don' ask me how...
I have experienced this. Run ODIN, then connect your devices to the computer. When ODIN detect it, unplug and then replug your device. When ODIN back detect it then flash.
Recent versions of Odin work the other way around. First plug then open. Older like <1.87, first you open the program then you plug device. Glad it got solved.
Sent from my HTC One VX using xda premium
I have also hit this screen several times while playing with roms, this is a fairly common example of "softbrick". Fortunately for me, Odin had no problems connecting, and then simply flashed an oem rom. I have not been able to hard brick this thing, which is a huge surprise considering all the flashing I've done. Frankly I'm surprised it hasn't blown up like an iraqi IED yet lol!
This is a good thing! It means that Samsung built in a good failsafe. It just means you hosed your rom install all the way down to the bootloader. Easy to recover from
Glad ya learned to fix it!
Big problems with my Samsung Galaxy Tab 2 10.1
cruise350 said:
Crap!!! I hope someone can help me. I was trying to upgrade my son's tablet using odin and a stock 4.04 rom from here :Samsung P5100 / P5110 / P5113 Galaxy Tab 2 10.1 Complete Stock Firmware. The first one for the P5113.
Anyway, everything seemed to be going okay following the directions and then a failed came up in the first box in odin was red. I repeated it and it appeared to be stuck. The tablet was in download mode and the blue line had only progressed about a quarter inch. I heard the usb disconnect and reconnect sound and I tried to initiate it through odin again but the tablet wasn't responding. I stupidly on plugged the tablet and tried to power it down. Now I can't do anything. Can't get into recovery or download mode. The tablet is stuck on the screen and has this message with a picture of a tablet then a yellow triangle and a computer. Here is the message: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. Kies won't recognize the tablet and when I click on emergency firmare recovery it just asks for PC code. I am stumped. I am not familiar with Samsung at all. Also, the message on the screen won't disappear. If I hold down power it won't turn off, the screen will go black and then the message will come right back so I'm afraid the battery will be dead soon and then I will be totally out of luck.
The tablet is a wifi only P5113 Tab 2 10.1.
Click to expand...
Click to collapse
Hi, my problem is identical. I have a samsung galaxy tab 2 10.1 and after a failed update with Odin the message was:Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. I try again with Odin and nothing. I used Kies, and nothing. Then i saw a reference to the md5 philz_touch_5.03.7-p5110.tar.md5 and i use it with Odin. Sucess but the message was RESET. Everithing disappeared from screen except the battery logo. The tablet is always on and with that image. The volume buttons and power don't work and it is not detected.
I'm affraid the thing is bad.
Can you help? Thank you.
Djadomor
Hey cruise, would you happen to still have the file you used on your son's box? The only page I can find won't let me in.
Hello,
I just updated the firmware of my brand new Note 10.1 (N8000) using Kies, which seems to have failed - I can't even turn the device off. I'm a quite experienced computer user, but brand new to Android. Any help or feedback would be very much appreciated (esp. how I can at least turn off the device).
Problem Description:
I have a new Note 10.1 (a German device/I'm in Germany using the Vodafone network, but I guess that shouldn't matter) and installed Kies today. The application identified a new firmware and suggested an update, which I did via USB. Everything appeared to have gone all right - the file got downloaded, transferred to the device, which then showed that it was installing the updates (something like 95 items). No error message. The device then booted, and that's where it seems to be stuck: since then, the device is in an endless loop: Screen is black, a swirling animation comes up, than the Samsung Logo, which stays for like 12 seconds, the screen goes black and it starts from the beginning (in total the loop takes like 15 secondes). Kies cannot connect to the device, and I can't even turn it off, it's just stuck in this endless loop.
Before the update, the device was neither modified nor rooted (I only installed a few apps), and there was no error message during the update (at least none that I saw).
Can anyone help???
Get the firmware file from sammobile and flash with odin. You can find a lot of how to regarding Odin, just do a search and you will find a movie or tutorial.
Here is the fw
http://www.hotfile.com/dl/178817278/616d7ef/N8000XXBLJ9_N8000OXABLJ9_DBT.zip.html
The link is from sammobile, not a mirror, so it's safe.
Or you could just return it for an exchange.
Sent from my GT-N8010 using Tapatalk 2
To turn off, just press power until it turns off (about 10 seconds)...
Kies firmware failed N8010
ultramag69 said:
To turn off, just press power until it turns off (about 10 seconds)...
Click to expand...
Click to collapse
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
EagleTalon1 said:
Hi there, I have the same problem but with N8010, after firmware update witch FAILED , my N8010 shows .... Firmwareas encountered an issue , Try to recover with Kies...
No way to recover with Kies, I've tryied with Odin flashing the original firmware Ics 404 " Odin flash PASSED, N8010 restart after flashing first start " Samsung note 10.1.. " but no going further it statck ther, I flashed again in Odin Jb 4.1.2 ... Odin Pass, N8010 reboot , Samsung note 10.1 go further Sound and Samsung logo come up but it stack there, I can not turn my N8010 off, if I push the Power botton it reboot again and stack after the souns and Samsung logo!!!
I can enter in Download mode for flashing again but can not get my N8010 further , Please HELP!! " dont know what to do .
ThankYou in advantage
Greetings
Joey
Click to expand...
Click to collapse
I'm having the same issue!!!!!
Kies failed! Odin PASS and stuck in the logo!, it doesnt boot!
You may need to go into recovery and wipe data/cache partition. This will wipe your internal memory of everything but you will get an operational note...
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
kimosab said:
my samsung tablet went through a tough time because it had no os and wasnt installing one so i went to odin and downloaded the stock rom then flashed it by odin while my tab was connected in download mode. suddenly the connection got unplugged while installing the new rom leaving me with a black screen. the real issue here is that i cant save my tab because it doesnt get to recovery nor download mode so im basically left with a useless piece of junk. i think there is a way to get it back because my computer recognizes it but odin doesnt. if i could get it to boot into download mode, i can get it back. but i dont know how...
my tab is samsung galaxt tab 3 lite sm t111.
pls help urgent!!!
Click to expand...
Click to collapse
Hello.
Thank you for using XDA Assist.
Please post your questions here:
http://forum.xda-developers.com/galaxy-tab-3/help
That's the specific help forum for your device.
Your device experts are located there.
Good luck!