Hyperdrive Rom Support Thread for All US Galaxy S3 Varient
This Thread is Started for Help and Support for those Members who cannot post in development threads or do not have enough posts to do so.
You may ask your general questions/issues here.
Please respect all members, especially those trying to provide you with help.
Please read the Frequently Asked Questions in the Rom Thread before asking questions
Thank you
Mine
Reserved
Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!
heels50blue said:
Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!
Click to expand...
Click to collapse
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium
sbreen94 said:
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
The problem is I can't get my phone into download mode to be able to use ODIN. Download mode will pop up for literally one second and then the phone shuts off.
mms
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.
ccsmoker said:
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.
Click to expand...
Click to collapse
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium
sbreen94 said:
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
It will not let me post the link, I am too new to the forum.
Shazam app not working on hyper drive 16.0.0 as well as video recorder.
This is. A great rom. Just I notice Shazam not working. It starts up then exit to the home screen. The S4 camera video recorder not working. Starts. up then turns to fuzz. Then say not able to capture media.
Incoming call volume ringer not working
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.
collettgirl said:
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.
Click to expand...
Click to collapse
Like your phone ringtone?
Sent from my SCH-I545 using xda premium
sbreen94 said:
Like your phone ringtone?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Yes my phone ringtone. also when i set my phone ringtone to vibrate and ring. It will just vibrate when someone calls. Thank you for you quick response and trying to help me. Much appreciated.
Tablet/Phablet Mode
Currently running RLS16 and it's running great!!!! Just curious on how I can get the phone to do a tablet mode and/or phablet since there's no hybrid settings baked into the ROM yet. Any help would be apprectiated.
hyperdrive rls16
Have a Verizon Galaxy S3 and followed Roms install instructions: 1.Download latest Hyperdrive Rom version Rls 16
2. Reboot into Recovery
3. Wipe Data/Factory Reset twice
4. Wipe cache and dalvik cache
5. Install Rom
6. Reboot.
But when phone reboots it loads and gets to the language screen and then will reboot and will do that over and over. Have tried it several times and same result did not have that problem with Rls 15. Any Help would be greatly appreciated. Thanks
GPS Fails to Lock (SCH-I535)
First of all, thank you to SBreen for your hard work on this ROM!
I just updated to RLS16 (standard kernel) hoping that it would fix my GPS and google Maps issues, but no luck so far. Below are the methods I have tried in my attempt to fix the GPS:
1) Clean ROM install (four times) including formatting all user/system data, wiping Dalvik cache, etc.
2) Fix Permissions from Clockwork Recovery (countless times)
3) Clearing all app data for google applications, including deleting velvet.apk from system and re-installing through the play store (and using standalone .apks)
4) Tightening the screws on the back of my S3
5) Enabling all location service providers
6) Removing Hyperdrive and restoring to the original ROM (yuck!) restores GPS functionality, so I know it's not physically broken.
I love everything about this ROM with the sole exception of the lack of GPS functionality. Google Maps is currently unusable, and GPS Status will run for hours without acquiring a lock, even with the phone in a stationary position in high-reception areas.
Any help on this issue is greatly appreciated, thanks!
After flashing, were you able to let the phone sit for 5-10 minutes before rebooting and setting it up? I found this crucial to getting the GPS to work...
Sent from my SCH-I535 using xda app-developers app
Wifi Automatically turning on
So far so good on rls16. Its great work, and I am digging all the great features and customization options. Performance is smooth. One issue though, which has plagued me on rls15 as well...
My WiFi keeps automatically turning itself on. It happens when the screen is off and has been sitting on my desk for a while, also happens while I am using it. I believe it is supposed to turn on and then off when downloading mms data, but that is not the case here. It wouldn't be an issue, except it is connecting me to the open network here in my office, which I need to sign into on a web interface every time I connect. The WiFi signal is very, very poor so I prefer not to connect. Any ideas?
Thanks!
RLS16 problem
I have been using rls15 with no problem except for the initial install with the Samsung activation. I love your builds they really bring out the capabilities of the device. I updated to RLS16 and the activation problem came back and also I'm now having sms problems. It works well for so long then it starts returning messages saying they failed. I've flashed and wiped 4 times before the install of rom and have tried to install the fix. Still no solution. Any advice? I'm also using att i747
Boot Animation
First, I would like to congratulate you for this wonderful ROM.
Only trouble is; unable to customize the boot animation. I've tried a few applications, but none were successful.
I will appreciate you help. Thank you.
Have a Verizon Galaxy S III
Related
EDIT: RIGHT AFTER POSTING, MY PHONE RANDOMLY STARTED WORKING. I HAVE NO IDEA WHAT I DID BESIDES POST HERE. MAGIC.
I installed Cyanogen version 7.2.0 just fine using the guide that was found here: http://www.mrmuh.com/2012/01/update-a-motorola-milestone-from-motorola-firmware-to-cyanogenmod-7/
However, the next morning I think I enabled the 2g/3g switch widget - and then my phone entered into a constant and continuous loop of "com.android.phone has unexpectedly closed" - and couldn't connect to cell service.
In a panic, I searched everywhere for fixes. I then tried a few of the fixes which instructed you to download "sqlite editor" and do some edits to the settings file. I did this, along with a couple of other network edits, resetting them to "0" instead of the "1" they were currently set to. No help.
Finally, I went into the Open Recovery system and did a full reset on cache/factory reset/etc. and then rebooted into cyanogen. Now my network won't even connect for a half a second and then crash like before - just straight up NO CONNECTION.
Now I've went through and attempted changing back some of those settings I messed around with in Sqlite - but to no avail.
Anyone with any ideas on how I can get an operating phone again, please let me know. I noticed I still have all my apps from previously, so I don't think I'm really factory resetting the phone. That could be part of the issue, I'm sure....I am very depressed and hoping for a miracle!!
Look into installing minimod recovery and then flashing the correct radio for your location after a full wipe.
If you do a google search you should find minimod. I'm on my phone or I would just link you.
Sent from my Milestone using XDA App
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
redsrule2500 said:
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
Click to expand...
Click to collapse
jhealy said:
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
Click to expand...
Click to collapse
Good call. I'm just quite happy this is working now, but you are right, don't want that doomsday feeling again. Thanks
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Do a fresh install of HONO through minimod recovery.
marwan91 said:
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Click to expand...
Click to collapse
Sent from my Milestone using XDA App
jhealy said:
Do a fresh install of HONO through minimod recovery.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
i did.. still the same problem ^^
Did you install the correct radio?
Sent from my Milestone using XDA App
Go download a apndroid.apk Google it.
that happened to me too
A humble request let the development thread be for just development.Just try to keep that one clean and post anything however random(about CM10.1 ofcourse) here.Don't flood the dev thread with about 70 posts regarding black screen problem.
Let this thread be for general questions, comments, discussion, complaints concerning CM10.1 for the Atrix 2.
CM10.1 development thread .
PS: Help the devs in understanding the reason for black screen problem, participate in the poll.
Thanks...
Sent from my MB865 using xda premium
Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan
Unlock blaxk screen
i cannot unlock after lock using on off button. how to unlock if still black screen? any solution? after i flash gapps camera and gallery fc. it happen when i open camera.
buglist 28/03/13
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.
qwerfv said:
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.
Click to expand...
Click to collapse
+1 for cLock weather issue but honestly I'm so thoroughly impressed with this ROM that I only see that as a minor hitch. I really never thought a fully functional JB would make it to the Atrix! Thank you Devs! :thumbup:
Sent from my SGH-I997 using xda app-developers app
SMONDAL84 said:
Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan
Click to expand...
Click to collapse
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium
Is there a way to keep the capacitive key backlight always on? Didn't spot anything in the main thread about this.
What is with this "♫" symbol?? It's very annoying, ugly, and it's everywhere on this ROM. in instagram, when entering passwords, in descriptions of apps in the playstore.
Loving this so far, but I do have a few concerns. I did make sure to install correctly (CM recovery -> wipe data, flash, reboot, flash gapps), but I'm running into some minor issues.
- My phone seems to be sluggish at times, especially noticeable when turning the screen off and when it vibrates (anything that vibrates twice in a short amount of time). There's a good half-second delay with each of these, much slower than on CM10. Is this normal? Other than that it runs pretty quickly.
- This is the more major issue, the alarm. Everything else in the gapps package works properly except for the alarm function of the clock. When an alarm goes off, there's no popup or anything, and pressing power stops the vibration from the alarm, but it doesn't actually turn the sound off. I have to kill the Alarm Klaxon service to shut it off. Any idea what could be causing this? I haven't heard of anyone else with this bug yet.
Will try flashing once again with BMM this time..
deveshmanish said:
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Will try with BMM this time along with the patch. Fingers crossed! (I went through the threads and it appeared that people with BMM probably had a greater success rate with installing in the 3rd system - getting superstitious now! )
Will update the results.
~
Any one found a way to OC the phone on this ROM ?
After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app
android.reddy143 said:
After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Enter cm recovery select custom recovery and again flash the rom
Sent from my MB865 using xda premium
any of you guys have problem cannot transfer files through usb? mine, when i connect click turn on USB storage, it just loading and loading and just loading.:crying:
Need help flashing the 4.2.2 ROM
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.
ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
I agree go for CM10 instead it's been pretty stable.
Sent from my MB865 using xda premium
It's in vain, he already flashed CM 10.1 & now he posted in the black screen thread.
Did get hit by the Black Screen Bug
RAD7 said:
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.
Click to expand...
Click to collapse
You were right. I watched the video on flashing ROMS from here https://www.youtube.com/watch?v=kumkZiGbTFI and tried it out. Got the black screen issue when flashing over JB. Then FXZd back to stock ICS and reflashed, but got the same thing again. So i'm back on ICS now. I suppose i'll upgrade to JB later and stay there for a while till this thing is sorted out.
Anyone getting YouTube problems.... Freezing... Could not stream at all with March build.
MB865/ATT/BMM
1. Stock 4.0.4
2. Miui
3. Kexec 4.2.2
6. ASOPA 4.2.2
Downloaded this ROM from the second link. Thought it was a bad download, as it would go through all the setup but it seems to install just fine, but when the phone reboots, the phone process immediately crashes, can't set any accounts (accounts crash), keyboard crashes, etc. Not sure what I'm hitting wrong, I've downloaded it again, wiped cache/reset, wiped dalvik, install just the rom first, set permissions, reboot into recovery, run again, install all software (launcher, factory apps, etc), but they still manage to crash (especially phone so I get no data unless connected to wifi).
Any advice? Thanks in advance
I believe thereis an issue with wifi calling, need to look into this, see if all works when not installing this, well try wiping, flashing rom only, then go back in aroma and flash anything but the removed from stock stuff. Hopefully this will be fixed soon
Sent from my Nexus One using xda app-developers app
demkantor said:
I believe thereis an issue with wifi calling, need to look into this, see if all works when not installing this, well try wiping, flashing rom only, then go back in aroma and flash anything but the removed from stock stuff. Hopefully this will be fixed soon
Sent from my Nexus One using xda app-developers app
Click to expand...
Click to collapse
I'll try that and let you know. Thanks!
wilvelas said:
I'll try that and let you know. Thanks!
Click to expand...
Click to collapse
I absolutely LOVE this rom. I got over the .phone crashing as it doesnt effect me much it seems just crashes twice on start-up and thats it. I didnt download wifi calling and it still crashes for me. But this is seriously otherwise the best rom ive ever used. Many kudos.
Yeah. I'm having the same problem too. Basically, the phone won't work. Everything just crashes. I hope they make a fix really soon. I love this ROM.
I find it weird that GO is the SLOWEST out of any roms I've tried...and even though I don't like it, stock isn't as bad as I thought - just has bad bloat. GO has chrashed even more than stock has, but after I just did a clean stock, its faster and both previous experiences....
Sent from my SGH-T839 using xda app-developers app
does anyone else have the issue with the modem? Can't seem to get it working again just get regular service no data.
Rooted fine a SII SGH-i727 samsung AT&T Skyrocket. I edited in-place the file to remove the reference for the phone model (prev. error on installation). Next repacked the zip with changes to the file. All looked good.
Copied files to SD card, rebooted holding vol/power. Able to browse using vol. keys to wipe data/rom, then install zip from SD. Waited a couple min. after no errors presented. Next updated the Google Play installer, waited again a couple just in case.
Turned off, then on, sits on CyanogenMod spinning circle forever and a day. Originally 25 min., then said OK, WTH?
Rebooted again, holding power down, then on, same just sitting there issue.
OK.... Repeated procedure again, wipe, this time did the davik and cache wipe, then installed zip, then Google. Reboot, STILL sits there on spinning circle for boot.
I don't get it. Several posts on this, but I redo, and get same results - insanity is setting in... Please advise, someone
I have my own computer repair business, but not as versed in Android/phones, at least to the OS/ROM level.
kmook said:
Rooted fine a SII SGH-i727 samsung AT&T Skyrocket. I edited in-place the file to remove the reference for the phone model (prev. error on installation). Next repacked the zip with changes to the file. All looked good.
Copied files to SD card, rebooted holding vol/power. Able to browse using vol. keys to wipe data/rom, then install zip from SD. Waited a couple min. after no errors presented. Next updated the Google Play installer, waited again a couple just in case.
Turned off, then on, sits on CyanogenMod spinning circle forever and a day. Originally 25 min., then said OK, WTH?
Rebooted again, holding power down, then on, same just sitting there issue.
OK.... Repeated procedure again, wipe, this time did the davik and cache wipe, then installed zip, then Google. Reboot, STILL sits there on spinning circle for boot.
I don't get it. Several posts on this, but I redo, and get same results - insanity is setting in... Please advise, someone
I have my own computer repair business, but not as versed in Android/phones, at least to the OS/ROM level.
Click to expand...
Click to collapse
I'm using the clockworkmod, v5.0.2.6, Gapps 4.2.2, and CM-10.1.2-skyrocket.zip
Make sure you have twrp 2.5 or 2.6 (ditch cwm , it's buggy for JB and modern roms)
Make sure you're radio is JB friendly i.e. UCMC1 or UXUMA7
Copy cm10 zip and google apps zips to your sd,int or ext doesn't matter
Reboot to recovery
Wipe system,data,cache,dalvik,preload,android secure (do twice,doesn't hurt and maybe better)
Install(flash) cm10.1.2
Install(flash) Google apps
Reboot system
Notes:
1.Search , as this (and related issues) been discussed Gazillion times
2.Do exactly as above
3.Be specific when describing problems , your post is like an app log !
4.There's a dedicated cm10 thread in general forum..
mahanddeem said:
Make sure you have twrp 2.5 or 2.6 (ditch cwm , it's buggy for JB and modern roms)
Make sure you're radio is JB friendly i.e. UCMC1 or UXUMA7
Copy cm10 zip and google apps zips to your sd,int or ext doesn't matter
Reboot to recovery
Wipe system,data,cache,dalvik,preload,android secure (do twice,doesn't hurt and maybe better)
Install(flash) cm10.1.2
Install(flash) Google apps
Reboot system
Notes:
1.Search , as this (and related issues) been discussed Gazillion times
2.Do exactly as above
3.Be specific when describing problems , your post is like an app log !
4.There's a dedicated cm10 thread in general forum..
Click to expand...
Click to collapse
WOW, THANK YOU!
It was the ther ROM writer that was the helper, TWRP! Didn't think that pgm was compatible with my phone, but found that it was, and it did the trick! Now I can go to bed, thanks again :highfive:
kmook said:
WOW, THANK YOU!
It was the ther ROM writer that was the helper, TWRP! Didn't think that pgm was compatible with my phone, but found that it was, and it did the trick! Now I can go to bed, thanks again :highfive:
Click to expand...
Click to collapse
Push the thanks button for him.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Now reboots on phone calls!
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?
kmook said:
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?
Click to expand...
Click to collapse
No one else is reporting this. It's user error. Start over and follow the instructions.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
kmook said:
OK, great, now it's working, but it reboots on making an outgoing phone call. Isn't the phone functionality the most important part?
Click to expand...
Click to collapse
Found that it reboots while Google Voice is installed --- and activated to make calls using GV.
If I turn off that feature in GV, the call will attempt to go through, no reboots. Enable making all calls through GV, phone reboots!
nistocus sorrow
xcrazydx said:
No one else is reporting this. It's user error. Start over and follow the instructions.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
Click to expand...
Click to collapse
Yeah, thanks for that helpful hint --- read my other reply about this topic. :cyclops:
Found that it is the Google Voice App, when enabled on all calls, it reboots. Just found out now that when it's set to ASK, and I attempt to make a call, the call went through, without rebooting.
kmook said:
Yeah, thanks for that helpful hint --- read my other reply about this topic. :cyclops:
Found that it is the Google Voice App, when enabled on all calls, it reboots. Just found out now that when it's set to ASK, and I attempt to make a call, the call went through, without rebooting.
Click to expand...
Click to collapse
No problem, glad I could help!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 4 Beta
So I've "successfully" updated to v8.0 using the above method. I'm currently on build 2CQL1. I updated from AQH7 to 2BQJA and then to CRA4 using the Samsung Firmware Science downloads. My phone is stock AT&T (not unlocked), and is not rooted. When going to CRA4, I encountered a pretty significant error which continues to plague me. I've searched through the forums and haven't read anything on similar to this issue. I cannot use Always on Display. It has to be turned off, and..I cannot take the update in Google play for the Always on Display app. If I try and take the update, the phone goes into this weird state: Screen dark except for the edge indicator. Phone will vibrate three times, but screen will remain dark. Only options I have is to try and restart or turn off. I was able to get into the recovery menu, and do a reset to factory settings. However, upon doing that I noticed that I was running build 2CQL1. After doing this a couple of times, I finally figured it out it was the AOD that was giving me issues. So I disabled it in the phone settings, and will not take the update in Google Play.
Update: Now, I'm getting the vibrations randomly, even with AOD turned off. The phone is still functional, but I fear I may have to reboot and do a reset at any moment.
Anybody have any thoughts on how I can get back to a stock version of ATT software? Again, I don't need to root or even unlock my phone. Just looking for the stock software so I can have a functional device.
Thanks in advance
Lavman72 said:
So I've "successfully" updated to v8.0 using the above method. I'm currently on build 2CQL1. I updated from AQH7 to 2BQJA and then to CRA4 using the Samsung Firmware Science downloads. My phone is stock AT&T (not unlocked), and is not rooted. When going to CRA4, I encountered a pretty significant error which continues to plague me. I've searched through the forums and haven't read anything on similar to this issue. I cannot use Always on Display. It has to be turned off, and..I cannot take the update in Google play for the Always on Display app. If I try and take the update, the phone goes into this weird state: Screen dark except for the edge indicator. Phone will vibrate three times, but screen will remain dark. Only options I have is to try and restart or turn off. I was able to get into the recovery menu, and do a reset to factory settings. However, upon doing that I noticed that I was running build 2CQL1. After doing this a couple of times, I finally figured it out it was the AOD that was giving me issues. So I disabled it in the phone settings, and will not take the update in Google Play.
Update: Now, I'm getting the vibrations randomly, even with AOD turned off. The phone is still functional, but I fear I may have to reboot and do a reset at any moment.
Anybody have any thoughts on how I can get back to a stock version of ATT software? Again, I don't need to root or even unlock my phone. Just looking for the stock software so I can have a functional device.
Thanks in advance
Click to expand...
Click to collapse
//N950U ATT\\ Stock Odin Files Firmware N950USQU3CRC2
https://r.tapatalk.com/shareLink?sh...ers.com/showthread.php?t=3783711&share_type=t
Sent from my iPhone using Tapatalk
jerrycoffman45 said:
//N950U ATT\\ Stock Odin Files Firmware N950USQU3CRC2
https://r.tapatalk.com/shareLink?sh...ers.com/showthread.php?t=3783711&share_type=t
Sent from my iPhone using Tapatalk
Click to expand...
Click to collapse
Thank you for the response. Can I just download the .zip file to my phone's SD care from the link and install it from the Recovery menu?
Lavman72 said:
Thank you for the response. Can I just download the .zip file to my phone's SD care from the link and install it from the Recovery menu?
Click to expand...
Click to collapse
no you need a computer
This is all set. I downloaded the latest official AT&T update, and installed using ODIN. Thanks to everyone for the assistance. It had been a while since I had done anything like that. Back to the Samsung Infuse days.