EDIT: RIGHT AFTER POSTING, MY PHONE RANDOMLY STARTED WORKING. I HAVE NO IDEA WHAT I DID BESIDES POST HERE. MAGIC.
I installed Cyanogen version 7.2.0 just fine using the guide that was found here: http://www.mrmuh.com/2012/01/update-a-motorola-milestone-from-motorola-firmware-to-cyanogenmod-7/
However, the next morning I think I enabled the 2g/3g switch widget - and then my phone entered into a constant and continuous loop of "com.android.phone has unexpectedly closed" - and couldn't connect to cell service.
In a panic, I searched everywhere for fixes. I then tried a few of the fixes which instructed you to download "sqlite editor" and do some edits to the settings file. I did this, along with a couple of other network edits, resetting them to "0" instead of the "1" they were currently set to. No help.
Finally, I went into the Open Recovery system and did a full reset on cache/factory reset/etc. and then rebooted into cyanogen. Now my network won't even connect for a half a second and then crash like before - just straight up NO CONNECTION.
Now I've went through and attempted changing back some of those settings I messed around with in Sqlite - but to no avail.
Anyone with any ideas on how I can get an operating phone again, please let me know. I noticed I still have all my apps from previously, so I don't think I'm really factory resetting the phone. That could be part of the issue, I'm sure....I am very depressed and hoping for a miracle!!
Look into installing minimod recovery and then flashing the correct radio for your location after a full wipe.
If you do a google search you should find minimod. I'm on my phone or I would just link you.
Sent from my Milestone using XDA App
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
redsrule2500 said:
OK Thanks for your reply.
However, randomly, just after I posted this - I looked down and my phone had a full 2G Connection. Went into baseband settings, enabled 850 band 3G, and now I have full 3G connectivity.
I have no clue how this happened. XDA forum is magical?
Thanks again for your reply, but thankfully I don't need the minimod suggestion as of now!!
Click to expand...
Click to collapse
jhealy said:
You're welcome. You might want to go ahead and install minimod though. I made the mistake of not having it installed and flashed a new rom without the ability to select bands and was without a phone all day. It's better safe than sorry.
Click to expand...
Click to collapse
Good call. I'm just quite happy this is working now, but you are right, don't want that doomsday feeling again. Thanks
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Do a fresh install of HONO through minimod recovery.
marwan91 said:
im having the same problem here :// i only can get cellNetwork if i restart with airplane mod.. then after i rebooted i go back to normal 3G/2G mode but otherwise i dnt get cell signal// also seems like wifi has some bugs im using HOHO CM7
Click to expand...
Click to collapse
Sent from my Milestone using XDA App
jhealy said:
Do a fresh install of HONO through minimod recovery.
Sent from my Milestone using XDA App
Click to expand...
Click to collapse
i did.. still the same problem ^^
Did you install the correct radio?
Sent from my Milestone using XDA App
Go download a apndroid.apk Google it.
that happened to me too
Related
Hi everyone,
I figured I would start this thread to give everyone a place to post their APN issues/fixes/work arounds to maybe cut down on the questions being asked in the development forums. I will include any of the fixes/workarounds I have seen so far and try to keep this thread updated with any new ones that come about. I have learned so much on here on XDA just by searching and reading, I hope that this thread can do the same for anyone else looking for answers. Thanks/credit for all these fixes/work arounds goes out to all the OP's (special thanks to Martovitz for inspiring me to write this) Again this is just random things people have tried that have worked for them,this is NOT a step by step, THEY MAY OR MAY NOT WORK FOR YOU, and they are in no particular order, everyones phone is different:
APN Voodoo:
1) Try Holding power button down while holding volume up to reboot phone.
2) Try pulling battery out while the phone is on, let it sit for a minute, then restart.
3) Try toggling airplane mode on wait a minute, then turn it back off.
4) If simple user is selected in your APN menu try selecting T-Mobile. If this fails try deleting simple user APN.
5) Go into settings>wireless>mobile networks. -let it search, pick one, let it 'error' then select the 'select automatically' option -wait a second, press back to the home screen, wait two more seconds APN issues disappear
6) Run fix permissions in ROM Manager
7) Replace Sim card,try new UICC sim card specifically for 3g/4g devices.
8) Try flashing new ROM while in a good T-Mobile area (ie full bars of reception) to register on network
9) Try reinstalling ROM using this process:
a) Wipe cache
b) Wipe Dalvik
c) Flash ROM
d) Flash gapps
e) Fix Permissions
f) Reboot
10)
a)Turn on WiFi and make sure you're connected.
b) Go into the Market, search "APN Backup".
c) Download the program called "APNsBU (ROOT)"
d) Open the program and click on the "Backup APNs" button.
e) After that's done, click on the "Restore APNs" button. It will prompt you to reboot your phone.
f) After the reboot, open the APNsBU program, click on the menu button on your phone and click "View APNs".
g) You should be able to see "Simple" and "T-Mobile US." Turn off your WiFi and you should be good to go!
11) The fix that's been working for me 100% is to just delete the APN type on both the T-Mobile US and Simple and then make sure T-Mobile US is selected
11) Use ROM Manager to "Reboot into Recovery", once recovery boots simply select "reboot system now" and let the phone boot back up. That's it, when the phone boots back up the apn settings will be restored and data will be working like it should.
***Disclaimer: I am in no way responsible for any damage you do to your phone trying these fixes/work arounds***
pretty awesome thread, thanks for sharing your experiences
Would someone be willing to type up or link to the reason why the APN problems manifest? I really appreciate the list of (supposed) fixes, but I'd also like to know why the problems exist in the first place.
I honestly don't think anyone really knows, but I'm willing to bet with the release of official gingerbread update these problems will disappear
Maybe if everyone starts posting the problems their having and where, when, why, and how they started we could narrow it down
Sent from my LG-P999 using XDA App
APN Issues only occur with not stock roms for me.
Apn issues:
They basically give u no data and when u go to apn settings there are no presets. This usually doesn't happen on first boot on cm. But when u reboot everything dissapears. Some fixes use to work for me but now data works when it wants to
Sent from my LG-P999 using XDA App
webstar1 said:
Apn issues:
They basically give u no data and when u go to apn settings there are no presets. This usually doesn't happen on first boot on cm. But when u reboot everything dissapears. Some fixes use to work for me but now data works when it wants to
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Exactly my problem or when I am on wifi and turn it off I don't get data back either
See and the really weird thing is you get people like me that have never had any apn problems .... but I have only flashed Cm7 rom starting with nb#32. I haven't used any other roms.... maybe that's a possible reason why i have no apn issues.
Sent from my LG-P999 using XDA App
webstar1 said:
Apn issues:
They basically give u no data and when u go to apn settings there are no presets. This usually doesn't happen on first boot on cm. But when u reboot everything dissapears. Some fixes use to work for me but now data works when it wants to
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Have u tried apn'sBU? It fixes every time for me. Usually happens first reboot after new flash (not the reboot out of cwr).
Yah, it's a crazy issue. Cm7 is the only rom I've flashed, I did a few full wipes around nightlies 38+ figuring it would have to help. Made no real difference.
Good luck.
G2X
PrettyPistol555 said:
Have u tried apn'sBU? It fixes every time for me. Usually happens first reboot after new flash (not the reboot out of cwr).
Yah, it's a crazy issue. Cm7 is the only rom I've flashed, I did a few full wipes around nightlies 38+ figuring it would have to help. Made no real difference.
Good luck.
G2X
Click to expand...
Click to collapse
Its a shame but at least you found a fix that works for ya bro
Sent from my LG-P999 using XDA App
Tried all of them besides new sim card and no luck to get cm or any other gb rom to work
Sent from my LG-P999 using XDA App
osugsxr said:
Tried all of them besides new sim card and no luck to get cm or any other gb rom to work
Click to expand...
Click to collapse
Are you having just apn issues or something else?? Apn should be a workaround ill be it annoying to deal with but at least workable, so is something else not working out??
Sent from my LG-P999 using XDA App
Sent from my LG-P999 using XDA App
Think its just apn, running the stock gb update fine . There may have been one other gb rom where my data was working but not sure . Cm just isn't working for me ,
jroyalty7 said:
Are you having just apn issues or something else?? Apn should be a workaround ill be it annoying to deal with but at least workable, so is something else not working out??
Sent from my LG-P999 using XDA App
Sent from my LG-P999 using XDA App
Click to expand...
Click to collapse
Sent from my LG-P999 using XDA App
My data/apn fix...
Okay, I guess this isn't technically a "FIX", but it WILL get your data working again until the next time the apn settings decide to mysteriously disappear.
Use ROM Manager to "Reboot into Recovery", once recovery boots simply select "reboot system now" and let the phone boot back up. That's it, when the phone boots back up the apn settings will be restored and data will be working like it should.
Wish I had an actual fix but this is MUCH better than nothing, and in my opinion easier than taking my case off and pulling the battery every time.
Okay, I guess this isn't technically a "FIX", but it WILL get your data working again until the next time the apn settings decide to mysteriously disappear.
Use ROM Manager to "Reboot into Recovery", once recovery boots simply select "reboot system now" and let the phone boot back up. That's it, when the phone boots back up the apn settings will be restored and data will be working like it should.
Wish I had an actual fix but this is MUCH better than nothing, and in my opinion easier than taking my case off and pulling the battery every time.
Click to expand...
Click to collapse
Its all good bro anything that gets it back is what this threads all about.... ill update the 1st post later tonight. Thanks for sharing.
Sent from my LG-P999 using XDA App
Any time I'm having data or signal issues, this pretty much fixes it.
3) Try toggling airplane mode on wait a minute, then turn it back off.
Click to expand...
Click to collapse
Going to try the clockwork one, would like to run cyanogen but no data is an issue
Sent from my HTC Glacier using XDA App
APN // No data
Having the same issue here with cyanogen ... Tried many build ... I'm adding my APN (I'm sure it's correct, it's working on stock firmware) But on Cyanogen, no data (4G) HSPA+ network ....
Tried removing battery, airplane ... impossible to get data working...
Any clue ?
SpOuK-3- said:
Having the same issue here with cyanogen ... Tried many build ... I'm adding my APN (I'm sure it's correct, it's working on stock firmware) But on Cyanogen, no data (4G) HSPA+ network ....
Tried removing battery, airplane ... impossible to get data working...
Any clue ?
Click to expand...
Click to collapse
Try all of the methods from 1st post... these are the only things people have found that work so far... good luck
Sent from my LG-P999 using XDA App
I tried all... Now i'm on the leaked GB build and my data (4G) is working perfectly.... i'm trying to find the difference... Maybe kernel or driver issue in cyanogen... I don't know
Sent from my LG-P999 using Tapatalk
I installed CM7 on my infuse yesterday and having an issue. I have read alot of forums but haven't found an answer. I am having connection issues while using the phone. I have flashed different modems still doesn't change anything. When I am using the market I get connection timed out. It switches between H, 3g, and E all the time. Is there anything else I can do to fix this?
Thanks in advance.
Read thru the cm7 thread in dev section is a good place to start ready to find your answer. Me personally have no data issues while on cm7
Sent from my SGH-I997 using XDA App
Look for the APN fix it is in many places.
My data dies when I first access the market. After I leave the market and it will come back and I have no trouble after that.
As for it switching between 4,H,3,E CM7 is giving you real connection info when other ROMS do not.
christopherj1980 said:
I installed CM7 on my infuse yesterday and having an issue. I have read alot of forums but haven't found an answer. I am having connection issues while using the phone. I have flashed different modems still doesn't change anything. When I am using the market I get connection timed out. It switches between H, 3g, and E all the time. Is there anything else I can do to fix this?
Thanks in advance.
Click to expand...
Click to collapse
I use to have that problem all the time, I use a different Apn, fixed it now my phone only has one apn for everything. Password is CINGULAR1. Hope you find success with this, I deleted all the other apns; Facebook did it to me as well.
Sent from my SGH-I997 using xda premium
Hi, im new to flashing custom rom's and ive been wanting to try CM7... but i see all these posts about APN issues and bluetooth issues... and i keep chickening out. @rboone18 wud u recommend a first time user to try cm7? problem is that i dont even know if there will be a stable CM release for infuse... i would wait for that...
sbjaved said:
Hi, im new to flashing custom rom's and ive been wanting to try CM7... but i see all these posts about APN issues and bluetooth issues... and i keep chickening out. @rboone18 wud u recommend a first time user to try cm7? problem is that i dont even know if there will be a stable CM release for infuse... i would wait for that...
Click to expand...
Click to collapse
1) Do you require bluetooth? If yes, don't use CM7. 2) Can you read instructions? If so, there's an easy fix for the APN thing and you'll be all set. CM7 is fantastic, I've used it for a long time.
In the instructions he asks to boot into recovery and flash the rom. now when i reboot into 3e recovery theres no option to install from zip... all there is are these options: reinstall packages, delete user data, delete cache data, format internal sd card...
---------- Post added at 06:16 AM ---------- Previous post was at 06:12 AM ----------
ok... figured it out... had to select reinstall packages
I like cm7 on every phone I have had, my phone runs 100% better, remember step where u flash again and to download Google apps zip to get market to get all ur apps and I'd recommend getting titanium back pro. I like backing up all my apps. Faster to load ur stuff back on phone.
Sent from my SGH-I997 using xda premium
thanks for the tip... i was a bit confused where the market place had gone
apps are downloading now... i backed up me apps and data with titanium... now when i restore, my apps and data will get overwritten i assume....
guys, sorry for the wrong section..
When flashing my ACE,i I need to root it first??
sorry for my bad english!
finch1991 said:
guys, sorry for the wrong section..
When flashing my ACE,i I need to root it first??
sorry for my bad english!
Click to expand...
Click to collapse
Yes. You can root using SuperOneClick.
Yes it some apps don't always restore well via backup though. Like adobe I usually restore flash without data. Free version of titanium back will piss you off it stops on every app it restores.
Sent from my SGH-I997 using xda premium
alright. im running the 7.2RC0 build (13/14dec). its a bit buggy. I get "com.google.process.gapps" has crashed every few minutes. calendar/browser don't open at all. any help??
sbjaved said:
alright. im running the 7.2RC0 build (13/14dec). its a bit buggy. I get "com.google.process.gapps" has crashed every few minutes. calendar/browser don't open at all. any help??
Click to expand...
Click to collapse
Did you restore system data with titanium if more than likely your problem start over and try again
Sent from my SGH-I997 using xda premium
anyone had any issues with bluetooth pairing but not connecting with CM7?
brorex said:
Did you restore system data with titanium if more than likely your problem start over and try again
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
start over as in reinstall gapps or reflash rom? and the steps for reflashing are the same as before or something different has to be done? and this time i should avoid restoring titanium backup??
I would wipe, reflash, I only restore user apps via titanium backup. Might download Google apps again. You only have to flash once if ur on cm7, just wipe flash cm7 and then flash Google apps. Then reboot.
Sent from my SGH-I997 using xda premium
ok...by wipe you mean format /system from recovery and reflash? also i have this weird thing where wifi icon no longer shows up if the phone is screenlocked for some time. when you unlock the wifi comes on. is the a CM thing or some setting i need to tweak for always ON wifi... thanks for all the help!
Also should I go to th 12/13dec build or the 20 nov build thats the latest on the links???
Wipe in where recovery and flash is. I would use newest build 12/13. I just haven't had time to update yet. Wifi, not sure where setting is since I don't use wifi with screen off but in past many phones would shut off wifi when screen goes off.
Sent from my SGH-I997 using xda premium
sbjaved said:
ok...by wipe you mean format /system from recovery and reflash? also i have this weird thing where wifi icon no longer shows up if the phone is screenlocked for some time. when you unlock the wifi comes on. is the a CM thing or some setting i need to tweak for always ON wifi... thanks for all the help!
Also should I go to th 12/13dec build or the 20 nov build thats the latest on the links???
Click to expand...
Click to collapse
Definately go with the latest 12/13 and when you are in wifi setting hit menu button and advanced settings choose wifi never sleeps
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
I'm having the same issue....
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
iCraft said:
I believe for the g2x you should see an H next to the bars, that is if you are in a good service area.
Otherwise I think it also shows G, and E.
If it doesn't have anything at all, then I'm not sure.
Does the internet work when you go inti the browser?
Sent from my LG-P999 using xda premium
Click to expand...
Click to collapse
No...internet not working when I opening the browser. And EDGE/3G icons also not appear. ((
demarcus99 said:
im using rg2x right now and the only way to fix it is with a hard reboot every time i turn my phone back on
Click to expand...
Click to collapse
Hard reboot? How to do it? Is data working after hard reboot?
Cabronbr said:
try reflashing the faux kernel it worked for me to fix a problem i had not being able to turn my wifi on it should work for you too
what i have a problem is the backupp app does nto work for me im runing rg2x miui by richie
Click to expand...
Click to collapse
Please give me a link to that rom (Richie). How to reflash faux kernel?? I should do it after installing MIUI? Or you mean MIUI Rom with faux kernel? I`ve tried lots of MIUI roms (( Same problem anyway (
jele said:
Yah I have the same problem, I notice it works but when you use WiFi then your done w/ the wifi and shut it off the regular cell data never comes back on - You have to completely reboot the phone...I'm using SINGH-UI - same thing
Click to expand...
Click to collapse
I`ve tried SINGH UI too, as I remember wi-fi is on by defalut, isn`t it? So, I turned it off, and use my phone few days. Rebooted it few times, but data not worked ((
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
naeem03 said:
I had this problem before, go to ur APNs and go to authentication and make the authentication "None" instead of "Not set". That will enable ur data
Click to expand...
Click to collapse
Thank you! I`ll try =) Tell me please which MIUI rom you tested with? Give me a link to that MIUI buld if it`s possible. Thank you! =)
Solution it works for me
ravshani said:
After installing MIUI I can`t enable data transfer (2g/3g internet). Data transfer is turning on, but there is no 2g/3g logo and internet. This happens after installing all MIUI stock and custom roms. APN settings is correct, before it was ok. I`m installing via Clockwork recovery v5. Device is G2x (P999)
What should I do? How to enable it?
Click to expand...
Click to collapse
Hey go to SETTINGS->MOBILE NETWORKS->ACCESS POINT NAMES-> in here select option button in your android phone, in the menu select NEW APN, you will get the APN settings as seen in this. In the link ACCESS NUMBER = SERVER in mobile.
As I am not allowed to post link for first ten TIMES! will guide you through
google search -> "vodafone apn address" the third result will be GPRS APN Settings with Username and Password - Modem Unlock. Click it and follow the method above mentioned.
Question was asked and answered.
Thread closed
anyone having problems with thier data after flashing these 2 ics roms
Giving more detail other than anybody having data issues will get people to answer.
Explain what is happening or not happening.
im working on that right now
I had problems with this previously - data was working right after I flashed CM9, then it stopped. IMEI was fine, and the phone recognized Tmo as the provider - just no data.
Here's what I did to get data working again - go to Settings > Wireless & Networks > More > Mobile networks > Access point names. Hit the menu button and select Reset to default. See if that helps you out.
Guys there is an Q/A thread
Manumission said:
I had problems with this previously - data was working right after I flashed CM9, then it stopped. IMEI was fine, and the phone recognized Tmo as the provider - just no data.
Here's what I did to get data working again - go to Settings > Wireless & Networks > More > Mobile networks > Access point names. Hit the menu button and select Reset to default. See if that helps you out.
Click to expand...
Click to collapse
omg thank you soo much man
imxsteezin said:
omg thank you soo much man
Click to expand...
Click to collapse
one more thing do you have to boot into recover and mount data and efs after every reebot to get the data working and also does it take a sec for you to get a signal
imxsteezin said:
one more thing do you have to boot into recover and mount data and efs after every reebot to get the data working and also does it take a sec for you to get a signal
Click to expand...
Click to collapse
You should not have to do that. Plus those are two different animals. Your service data is just internet. Data that you mount in recovery is all the stuff on your phone in a folder labeled data.
alright thanks again man i was freaking out so much because of this do you think they are gonna make fufture updates to fix this?
imxsteezin said:
alright thanks again man i was freaking out so much because of this do you think they are gonna make fufture updates to fix this?
Click to expand...
Click to collapse
Heres the deal, if this is a issue head over to github and report the issues. Be detailed and provide logs, max, bhundven and others will see the report and address the report. This is the only real way to make sure issues are getting addressed.
Has anyone had problems trying to use the market without wifi because every time I try to download something I get a no connection error but I can use the internet without wifi
Sent from my SGH-T959V using XDA
That sounds like a problem with the wifi service you are using.
No I'm saying without the wifi being connected I can download stuff from the market and my data keeps going in and out
Sent from my SGH-T959V using XDA
yeah, so check your wifi provider.
Also,
if you are having awkward issues, then wipe data.
When I started CM9 the first time, this is what I did. wipe, data, cache, system, boot from CWM, then flash CM9, then factory reset from TWRP.
airfluip1 said:
yeah, so check your wifi provider.
Also,
if you are having awkward issues, then wipe data.
When I started CM9 the first time, this is what I did. wipe, data, cache, system, boot from CWM, then flash CM9, then factory reset from TWRP.
Click to expand...
Click to collapse
Okay are you having problems with the service going in and out
Sent from my SGH-T959V using XDA
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
ajrty33 said:
Yes. It's come up many, many times.
Flash the latest cm 10.1 and fix the mobile settings.
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
996 said:
I thought flashing "[OFFICIAL]CM10.1 Official Nightlies for D2VZW GSIII (12/24 Official Data Works)" was the latest one. How would I go about "fixing" the mobile settings? via the settings menu? I cannot access that menu if I need to go there. I need to get past the activation screen. Also I am not so sure on performing the four corners trick in order to get past that screen.
thanks
Click to expand...
Click to collapse
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
droidstyle said:
odin back to VRALG1 and then reprovision with dialer code *2767*3855#
Click to expand...
Click to collapse
Can you elaborate on this?
996 said:
So...I went ahead and flashed the Dec 24th official 10.1 release with data working. I flashed with TWRP and it went smoothly. I couldn't activate the phone because it was stuck in roaming. I tried what ever I could do but could not get out of it. So I resorted back to full stock from verizon locking and un-rooting. Did that and I also flashed a stock radio. Still cannot get out of roaming mode.
Any suggestions? Kind of in desperate need of data to get a working phone!
Thanks in advance. I'm sure this problem has come up among many of you.
Click to expand...
Click to collapse
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
rossida said:
i just posted a fix topic for this but here this is how i got mine to work after flashing CM10.1 the 12/24
If you remove ur sim card and boot up and connect via wifi, u can then register and set up the phone. then shut down put sim card back in and boot up. go to system settings -> More... under wireless and networks -> mobile networks -> CDMA subscription and choose RUIM/SIM (NOT NV)
Click to expand...
Click to collapse
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
996 said:
hmm sounds like it might work for me! but do you get full 4G? and good radio coverage like the touchwiz roms?
Click to expand...
Click to collapse
i couldnt tell u sadly... where i am now i dont get 4g. 3g works fine. only had it flashed for 2 hours and been messing around with it. a couple of phone calls and text messages and doesnt seem like its dropping signal at all. but the solution i posted works just fine. if u dont want to try it just wait for the next release...
996 said:
Gotcha. Did it and it seems to be fine now. Many thanks! Now I am hesitating going back to 10.1. I think i'll just stick to CM10 for now. until such time everything gets fixed.
Click to expand...
Click to collapse
Flash cm10.1 again but this time go into settings/networks/cdma subs and select ruim/sim. Reboot
Sent from my SCH-I535 using xda app-developers app
Laramie1997 said:
Can you elaborate on this?
Click to expand...
Click to collapse
I didnt see a responce from here but ill do my best, flash back to the stock ROM using ODIN and you should be put back into the operating system still in roaming mode then you dial *2767*3855# as soon as you hit the # your phone will download a file and re-provision itself which will fix the roaming error.