Database Info

Very strange text message issue

When someone sends me a message they get this message automatically "Command not supported* Battery remaining 95%"
The battery % changes whatever my battery status is. It also shows in my list that I actually sent the message. Anyone have a clue what is going on here?

You've been around for a while, so hau about some more information such as:
When did it start?
Recent changes to the phone (before and after this started happening)? Specifically ROMs and applications.
Anything you've already tried to fix this?

Wulamoc said:
You've been around for a while, so hau about some more information such as:
When did it start?
Recent changes to the phone (before and after this started happening)? Specifically ROMs and applications.
Anything you've already tried to fix this?
Click to expand...
Click to collapse
Well, if any of the information was needed I would have said it. There have been no recent changes, this started today (hence the post). ROM is listed. This happens rather I use stock messaging or another. No fix has been done since I don't know how to fix and have never seen this issue (hence the post). If you can help great, if not that is fine too.

virusmonk3y said:
Well, if any of the information was needed I would have said it. There have been no recent changes, this started today (hence the post). ROM is listed. This happens rather I use stock messaging or another. No fix has been done since I don't know how to fix and have never seen this issue (hence the post). If you can help great, if not that is fine too.
Click to expand...
Click to collapse
Have you started simple - pulling the battery?
Also - any battery status apps installed? https://market.android.com/details?id=net.mobilemonkeys.Battery looks like some have the ability to automatically respond to a text with a battery level - one might be going rogue?? (SMS Commander is another that can do this)

homeslice976 said:
Have you started simple - pulling the battery?
Also - any battery status apps installed? https://market.android.com/details?id=net.mobilemonkeys.Battery looks like some have the ability to automatically respond to a text with a battery level - one might be going rogue?? (SMS Commander is another that can do this)
Click to expand...
Click to collapse
No battery apps. Tried pulling battery, nothing.

If this just started today, there had to be something that triggered it. Have you considered flashing your backup (assuming you have one) to see if it goes away?

pazzo02 said:
Never mind
Click to expand...
Click to collapse
That's about where I'm at.
Seems like an app issue, rather than a carrier/rom/w/e issue.
And given it's obscurity, one is going to have to clean wipe down to base ROM without any installed apps/widgets and see if the issue persists.
If it doesn't, then reloading Apps-Data and see if it persists...
If it does persist before reloading apps-data, then they would have eliminated some unfathomable number of variables...

pazzo02 said:
If this just started today, there had to be something that triggered it. Have you considered flashing your backup (assuming you have one) to see if it goes away?
Click to expand...
Click to collapse
If something triggered it, I have no clue what did. Last night, I charged my phone, woke up for work, the wife sent me a text and that is when it happened. I have a back up yea, which I might have to do.

Did you ever fix this or figure out what it was? My GS3 has started doing this. No ROM, rooted and unlocked. Only SMS app I have installed would be Mighty Text.

Moved to Q & A section.
Sent from my Galaxy Nexus using Tapatalk 2

That is weird!

Here's what I would do...
1. Check for any apps that updated through the Google Play Store overnight
a. If any updated, uninstall and see if that fixed your issue.
b. if none updated, continue to step 2
2. Reboot into CWM Recovery and wipe dalvik cache and fix permissions from CWM
3. Test your device
a. if problem is fixed stop here
b. if problem persists continue to step 4
4. Verify that you do have a nandroid backup of your phone
a. to do this, open file explorer and navigate to the you CWM folder on your SD card and verify a nandroid backup has been made
b. if one is not made, reboot into recovery and do this now!!!
5. Go to settings and reset your device.
6. When phone boots back up, test SMS
a. if issue persists, download CM 7.2 and re flash your rom and go to step 7
b. if issue is fixed, continue to step 7
7. If the issue is fixed, you know its a setting or app on your phone causing the problem.
8. If you have a previous nandroid backup, which you stated you did, flash the nandroid through CWM
9. Test SMS
a. if issue is fixed GREAT
b. if issue is not fixed, wipe your phone and install your apps back one by one from the google play store
Previously when I would flash a CM ROM I would dirty flash it so I didn't have to reinstall my apps back to my phone. If you are flashing nightlies of CM 7.2, I would do a regular flash to wipe the device completely.
On a side note, an Unofficial version of CM10 is available for the Inspire 4G... It will be picked up by the CM Dev team in about a month. That means we will have some Jelly Bean love official from CM.
Cheers!!!

[Q&A][ROM][Jellybean] CNA 3.6.6 for Samsung Infuse [PORT]

Welcome, everyone- this is the place to ask a question about the CNA Jellybean Rom- Port for our Infuse and more importantly hopefully have that question answered.
You may also discuss issues you are having such as can't download, which g apps do I use, getting a FC on xyz ap, and so on.
A few general Q & A's you may find helpful:
Q: What is CNA ? Any screenshot and more info?
A: Code Name Android info here: http://codenameandroid.com
Q: Where can I download this?
A: Info is in the OP, or you can go here: http://goo.im/devs/Th3Bill/CNA/Infuse
Q: After flashing or using for extended periods my phone seems a bit slow- what to do to make it faster?
A: The test build for this port ( and MIUI v4) was done on my phone since Th3Bill (OP) does not have an Infuse. (Think about that for a minute, no Infuse and to date has brought us 2 roms to enjoy )
Four things I have done that work for me to make the phone faster: 1. Update Superuser ( if applicable.) 2. Choose a static (still) wallpaper rather than a live wallpaper. 3. In developer settings, change animation /transition to "off" or "0". 4.Use the app of your choice to clean up the phone, I use Cachemate.
One other tip for better battery life - this rom will let you download and use CM 10 themes. Using one that has darker backgrounds throughout uses less battery than themes using a lot of light colors.
OK - it's all yours !! I will help as best I can, Th3Bill has a link to this page and will be checking in as often as he can - you will find he is involved and supportive and there will be updates as new things are pushed to source. Regards.

Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?

psal217050 said:
Thanks for the start of the Q&A. Let me be the first then...
I am coming from Scott's CM10, do I just wipe, wipe, wipe and reflash or do I need to Heimdall (maybe with ICS) back first then flash the CNA ROM?
Which GAPPS do you recommend?
Click to expand...
Click to collapse
You are correct, should be able to wipe x3 and flash - one person also "fixed Permissions" to clear a FC issue.
Edit; I used the 7/26/2012 g apps, you might need to get the gallery2.apk

Here is what I used for gapps. Works just fine. v3
http://www.jokersax.com/developer-pages/jokersax/cm10-gapps/

Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.

psal217050 said:
Wiped/factory reset a couple of times, wipe cache, wipe Dalvik, another factory reset, flashed CNA ROM, flashed jellygapps v3, fixed permissions, rebooted, rebooted again and have an X, then
USB Mass Storage Toggle
App info: http://forum.xda-developers.com/showthread.php?t=1389375.
Usage: Tap on the Droid to switch UMS mode.
Tapped Droid but I cannot connect to this PC (work PC). I have to wait to I get home. Or suggestions are welcomed.
Click to expand...
Click to collapse
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.

That's correct. So no big deal, another hour and I will be home and hopefully up and running once I connect there. I will post again with the results.

good Q&A

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?

psal217050 said:
Okay, I am home, USB is connected, tapped the Droid, it says UMS is currently enabled. I downloaded the app from the link...
For the devices listed above, the App works like a charm.
•Latest stable version (1.1.4): Download APK (you'll probably want this one!)
Now what? Reboot and flash it?
Click to expand...
Click to collapse
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:

Pony Express said:
Guessing your work PC does'nt have phone drivers - I have been using that USB Mass Storage Toggle for some time, including on this build.
Click to expand...
Click to collapse
Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Also tried it with the other file found on the thread (USB mass storage)...neither work.
Finding Update package...
Opening update package...
Installing update...
Installation aborted.
The pix of Droid laying down, check open and a red triangle with exclamation in it showing up.
Log says:
Installation aborted.
I:Can't partition unsafe device: /dev/block/mmcblk0p1
I:Can't format unknow volume: /external_sd
I:Can't partition unsafe device: /dev/block/mmcblk1p1

I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.

I'm not so sure you want to flash since they are .apk's
Sent from my SGH-I997 using xda app-developers app
---------- Post added at 04:45 PM ---------- Previous post was at 04:44 PM ----------
Woops, I misunderstood the problem.
Sent from my SGH-I997 using xda app-developers app

Pony Express said:
I suppose the best route would be to start over. There should be no problem coming from Scott's excellent build.
Having said that, try installing a CM9 rom, let it settle in for 5 -10 minutes and reboot, wipes, flash and see if it will boot. Go back later and get the g apps. This is what worked for me. I can tell you that during the install, phone will cut off before making it back to the "reboot system now" screen, however it will restart and take you there so just hit power button to reboot. This rom does take 2-3 times as long to boot for the first time as opposed to other roms.
Click to expand...
Click to collapse
SD card in or out?

Pony Express said:
Ok.. Bill did not have that included in my test build... he mentioned he was going to add it, sorry for the extra step.
Yes, reboot and flash and let me know how it goes. :fingers-crossed:
Click to expand...
Click to collapse
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Edit: Also it booted itself to the Nexus 7 screen without asking after installing the rom package. Had to go back in and add the gapps.

psal217050 said:
SD card in or out?
Click to expand...
Click to collapse
I always leave my SD card in... no problems for me so far.

dparrothead1 said:
Bill did include the USB Mass Storage Toggle in the build. It should be there when you flash the rom. It was there when I flashed and it works. No additional d/l's were necessary.
Also, I didn't have any of the restarts you mentioned. I had a black screen for about 30 seconds when it went to the new CWM and then a black screen for about 30 more seconds when it rebooted to the Nexus X.
I did think I had problems because it stayed on the Nexus X screen for about 5 minutes before it booted up to the lock screen.
Click to expand...
Click to collapse
Thanks, man. That is exactly the way the install should go.

Pony Express said:
I always leave my SD card in... no problems for me so far.
Click to expand...
Click to collapse
+1 for leaving the SD card in....never take mine out when flashing.

is 720 recording fixed, or is it still recording a bit choppy?

SMiGGs said:
is 720 recording fixed, or is it still recording a bit choppy?
Click to expand...
Click to collapse
It is still a little choppy.

[Rom] Jellybean for Droid

Have fun, and format /system before flashing!
added camera app, fm radio, media_codecs.xml (fixes sound probs)
http://www.mediafire.com/file/rm3t3813wwxaewd/cm-10-20120826-UNOFFICIAL-sholes.zip
bootloops? ts problems?
did you format system?
try safe kernel (stockish ram/sgx/dsp timings)
http://www.mediafire.com/file/0kci9mvja4b9ssn/jb_safe_kernel.zip
or safer kernel (doesn't reprogram core clock at boot, exact stock timings)
http://www.mediafire.com/?do6yfe1c79v7xj7
or safest (same as safer with cpu max at 800mhz instead of 1000)
http://www.mediafire.com/file/926lgj8qu2a8l8s/jb_safest_kernel.zip
still no go?
try ics build here:
http://forum.xda-developers.com/showpost.php?p=29471613&postcount=1855
with 160mhz kernel
then wipe everything and try this build again, or enjoy ics :]
if you get stuck without touchscreen don't sbf back to stock
try safe kernel and ics build, if you still have troubles pm me
Gapps: http://www.mediafire.com/file/6gm3mm7iyi775n6/gapps-jb-20120726-minimal-datainstall.zip
broken: lots? please test
greets and credit: nadlabak, quarx2k, tpruvot, mbm, everybody at #motomagic, et cetera

kfazz said:
Have fun!
Build: http://www.mediafire.com/file/elk7kvw2hyu28ij/cm-10-20120824-UNOFFICIAL-sholes.zip
Gapps: none yet
broken: lots? please test
greets and credit: nadlabak, quarx2k, tpruvot, mbm, everybody at #motomagic, et cetera
Click to expand...
Click to collapse
Downloading
since this is CM10 based would regular cm10 gapps work? Thanks
Edit: It doesn't seem to boot. It gets stuck on the android screen.

about 3m freee in system, so regular jb gapps wont work unless modified to use /data. ics gapps work.
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
or just delete it from the zip before flashing

kfazz said:
about 3m freee in system, so regular jb gapps wont work unless modified to use /data. ics gapps work.
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
or just delete it from the zip before flashing
Click to expand...
Click to collapse
Installd ics gapps.
So, got rid of bootloop using adb to remove gps. Boots up fine after that.
CPU overclock settings can not be changed in settings. Works fine in setcpu.
No camera app included.
EDIT: Phone was plugged into usb port on computer entire time, and I noticed that the battery was not charging. Flashed back to my daily driver for now and phone is charging again. Not sure if this is common to anyone else or just a bug for me.

this is filthy! so fast. i used http://forum.xda-developers.com/showpost.php?p=30325746&postcount=1977 nightwing's .zip to get market over adb. wireless also works. mp3's through music load up like it's going to play, but then flashes a screen where song progress is complete and goes back to the artist list, but media server found all my songs. m4a's say file not supported. bluetooth paired with my keyboard and worked. voice dialer worked to open apps and i got a few beeps out of it at the end of commands so some sound is working. mine's not activated though so i can't test radios. donations on the way. thanks for all the hard work.

peeyourownpants said:
this is filthy! so fast. i used http://forum.xda-developers.com/showpost.php?p=30325746&postcount=1977 nightwing's .zip to get market over adb. wireless also works. mp3's through music load up like it's going to play, but then flashes a screen where song progress is complete and goes back to the artist list, but media server found all my songs. m4a's say file not supported. bluetooth paired with my keyboard and worked. voice dialer worked to open apps and i got a few beeps out of it at the end of commands so some sound is working. mine's not activated though so i can't test radios. donations on the way. thanks for all the hard work.
Click to expand...
Click to collapse
I can confirm 3G and calling works.
also, is there a way to get google now on this?

db2u said:
Installd ics gapps.
So, got rid of bootloop using adb to remove gps. Boots up fine after that.
CPU overclock settings can not be changed in settings. Works fine in setcpu.
No camera app included.
EDIT: Phone was plugged into usb port on computer entire time, and I noticed that the battery was not charging. Flashed back to my daily driver for now and phone is charging again. Not sure if this is common to anyone else or just a bug for me.
Click to expand...
Click to collapse
Might flash back to test some more once my battery gets up to a decent level

Can't get it to boot, using CWR 3 from Rom Manager

jyeley5 said:
Can't get it to boot, using CWR 3 from Rom Manager
Click to expand...
Click to collapse
Originally Posted by kfazz
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so

jyeley5 said:
Can't get it to boot, using CWR 3 from Rom Manager
Click to expand...
Click to collapse
db2u said:
Originally Posted by kfazz
if you have bootloop:
adb shelll and
rm /system/lib/hw/gps.sholes.so
Click to expand...
Click to collapse
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2

Finally got it booting, thanks for the help!
kfazz: Awesome work!!! What's the current status of FM radio though? I tried the FMRadio.apk from the Defy and it FC'd as soon as I plugged in my headphones

peeyourownpants said:
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
I used to get that on CM7.1 I think it was a bad flash, It went away when I flashes Steeldroid, and I am definitely not getting it on this build

mediafire virus
After using link at top of page to download from media fire using Windows explorer I got a message saying virus detected on my computer and the page looks exactly like Microsoft security essentials I clicked no and computer crashed!!! This makes 2 times I have gotten virus from media fire last time I was able to restore to an earlier backup this time computer wouldn't let me boot into recovery or anything after much trouble I got it to boot into safe mode only because I have recovery disks that came with PC but have not been able to repair it complelty yet because if I try to restore it ends with an error about system contains some file ( idont remember name) so if I can't figure it out I guess I will backup important files and do a complete restore from factory disks ( last resort ) . Just a warning . If anybody has any answers and or ways to prevent this please PM me. Hopefully this won't happen to anyone else
Sorry for highjacking thread I know this is off subject but don't want anyone else to become a victim!!
Link worked fine when downloaded from phone but I have no way to modify zip or use adb to make JB boot
Sorry to kfazz for this post I know its not his fault I found many people with same problem with a Google search
Keep up the great work kfazz you are the best!!

peeyourownpants said:
I have 3 loops at the "M" screen each time before it moves on to the android screen and finishes the boot even with gps.sholes.so removed
Sent from my Galaxy Nexus using Tapatalk 2
Click to expand...
Click to collapse
Similar problems, but mine's randomly deciding to boot up or not. Sometimes it doesn't boot at all, other times it boots on the first try.
However since the Camera, Wifi, and other Jelly Bean goodness works, I can't help but to thank you on this release, Good luck on further development!
EDIT: And now it won't even boot, sometimes it just gets stuck at a blank screen. Bummer.

denwaotoko said:
Similar problems, but mine's randomly deciding to boot up or not. Sometimes it doesn't boot at all, other times it boots on the first try.
However since the Camera, Wifi, and other Jelly Bean goodness works, I can't help but to thank you on this release, Good luck on further development!
Click to expand...
Click to collapse
i cant get the new build to boot i removed the gps.sholes file and im just bootlooping at m logo

wolf45801 said:
i cant get the new build to boot i removed the gps.sholes file and im just bootlooping at m logo
Click to expand...
Click to collapse
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes

ASAM123 said:
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes
Click to expand...
Click to collapse
i couldn't get the newest to boot either, just loops at the M.
i poked into the .zip and the gps file is gps.goldfish.so, not sure if that's relevant...

ASAM123 said:
Which one, the one with fm radio and camera? I was able to get the first build to boot fine after removing gps.sholes
Click to expand...
Click to collapse
i finally got it working i downloaded the new one but for some reason mediafire didnt download the full rom so had to redownload

I can't get it to boot up. I end up with red M bootloops with both the 8/24 and 8/26 builds. I wiped everything between flashes. Any ideas?

Flashed over 7/12 ics build seems as good as ics was don't think I will be going back to ics. Gallery opens but never shows any pics fm radio is nice only plays in mono other than that everything else I have tested is working correctly great work as usual
Thanks to all who are making this possible
Sent from my Droid using xda app-developers app

[Q&A] CM10.1

A humble request let the development thread be for just development.Just try to keep that one clean and post anything however random(about CM10.1 ofcourse) here.Don't flood the dev thread with about 70 posts regarding black screen problem.
Let this thread be for general questions, comments, discussion, complaints concerning CM10.1 for the Atrix 2.
CM10.1 development thread .
PS: Help the devs in understanding the reason for black screen problem, participate in the poll.
Thanks...
Sent from my MB865 using xda premium

Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan

Unlock blaxk screen
i cannot unlock after lock using on off button. how to unlock if still black screen? any solution? after i flash gapps camera and gallery fc. it happen when i open camera.

buglist 28/03/13
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.

qwerfv said:
cLock can't find any location for weather
forfarded call message not work like on scrren from this http://forum.xda-developers.com/showpost.php?p=37850271&postcount=68
and also unavailable change shutter sound and camera save destination.
Click to expand...
Click to collapse
+1 for cLock weather issue but honestly I'm so thoroughly impressed with this ROM that I only see that as a minor hitch. I really never thought a fully functional JB would make it to the Atrix! Thank you Devs! :thumbup:
Sent from my SGH-I997 using xda app-developers app

SMONDAL84 said:
Thanks for creating this thread to keep the dev thread clean.
I got the black screen after I flashed the ROM and the boot logo. How to get past tge black screen? I had to FXZ back to ICS for now. I did a couple of battery pulls but it did not help.
~
Sayantan
Click to expand...
Click to collapse
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium

Is there a way to keep the capacitive key backlight always on? Didn't spot anything in the main thread about this.

What is with this "♫" symbol?? It's very annoying, ugly, and it's everywhere on this ROM. in instagram, when entering passwords, in descriptions of apps in the playstore.

Loving this so far, but I do have a few concerns. I did make sure to install correctly (CM recovery -> wipe data, flash, reboot, flash gapps), but I'm running into some minor issues.
- My phone seems to be sluggish at times, especially noticeable when turning the screen off and when it vibrates (anything that vibrates twice in a short amount of time). There's a good half-second delay with each of these, much slower than on CM10. Is this normal? Other than that it runs pretty quickly.
- This is the more major issue, the alarm. Everything else in the gapps package works properly except for the alarm function of the clock. When an alarm goes off, there's no popup or anything, and pressing power stops the vibration from the alarm, but it doesn't actually turn the sound off. I have to kill the Alarm Klaxon service to shut it off. Any idea what could be causing this? I haven't heard of anyone else with this bug yet.

Will try flashing once again with BMM this time..
deveshmanish said:
Actually there's no specific reason(at least till now) and hence solution for this black screen bug.Some of the guys who have it have reported to come around it by taking out the battery and rebooting until they get rid of it.But again the number of battery pulls varies from just one time for some to about 40 minutes of battery pull for some others.So can't really say if you tried enough or what else might be the solution.This is the situation as is.
Keep trying or wait till it gets fixed there is really nothing else that you can do at the moment.
Sent from my MB865 using xda premium
Click to expand...
Click to collapse
Will try with BMM this time along with the patch. Fingers crossed! (I went through the threads and it appeared that people with BMM probably had a greater success rate with installing in the 3rd system - getting superstitious now! )
Will update the results.
~

Any one found a way to OC the phone on this ROM ?

After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app

android.reddy143 said:
After flashing this ROM it is not booting. It is stopped at boot logo and showing black screen. Could any one help in this
Regarding , I am on pa ver2.99
Kernel 3.0.0.8
And please tell me which is the best radio apk for PA2.99
Thanks in advance.
Sent from my MB865 using xda app-developers app
Click to expand...
Click to collapse
Enter cm recovery select custom recovery and again flash the rom
Sent from my MB865 using xda premium

any of you guys have problem cannot transfer files through usb? mine, when i connect click turn on USB storage, it just loading and loading and just loading.:crying:

Need help flashing the 4.2.2 ROM
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.

ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.

ozzman77 said:
My Atrix 2 is on the JB 4.1.2 leak. Model No. ME865. I have ROM Manager installed. I have copied the zipped ROM and GAPPS files to the external memory card. When I boot into Recovery mode, I cannot see any option to Wipe Data / Factory Reset. I am pretty new at this and so if anyone outlines the steps in detail or posts any link to point in me in the right direction, it would help me much. Thanks in advance.
Click to expand...
Click to collapse
I agree go for CM10 instead it's been pretty stable.
Sent from my MB865 using xda premium

It's in vain, he already flashed CM 10.1 & now he posted in the black screen thread.

Did get hit by the Black Screen Bug
RAD7 said:
If you are new to flashing ROM's stay away from this because currently a lot of users face black screen issues etc. Also it should not be installed over JB base as well. Read the entire thread from post one till current and you will see for yourself as it will enlighten you on a lot of aspects what people have already tried & which may save you from heartburn. JB gives a great user experience, enjoy it for a while & then get on the bandwagon when you are more of a informed user.
Click to expand...
Click to collapse
You were right. I watched the video on flashing ROMS from here https://www.youtube.com/watch?v=kumkZiGbTFI and tried it out. Got the black screen issue when flashing over JB. Then FXZd back to stock ICS and reflashed, but got the same thing again. So i'm back on ICS now. I suppose i'll upgrade to JB later and stay there for a while till this thing is sorted out.

Anyone getting YouTube problems.... Freezing... Could not stream at all with March build.
MB865/ATT/BMM
1. Stock 4.0.4
2. Miui
3. Kexec 4.2.2
6. ASOPA 4.2.2

[Q&A] Hyperdrive Rom S3║ Non-Development Discussion ║ Support

Hyperdrive Rom Support Thread for All US Galaxy S3 Varient​
This Thread is Started for Help and Support for those Members who cannot post in development threads or do not have enough posts to do so.
You may ask your general questions/issues here.
Please respect all members, especially those trying to provide you with help.
Please read the Frequently Asked Questions in the Rom Thread before asking questions
Thank you

Mine

Reserved

Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!

heels50blue said:
Currently I am running the Hyperdrive ROM 13.0.0 and today my phone is really acting up. The power button is unresponsive. I am not sure if this is a hardware issue or what. It just randomly became unresponsive. When I try to boot into recovery or download mode, the screen will pop up for literally one second and then the phone will cut off. So booting into recovery and/or download mode is a no go. The only way I can get it to boot all the way back up is if I pull the battery out and then put it back in and then hold the volume down button and the home button and then quickly hit volume down to cancel the download mode operation and then the phone restarts and reboots all the way.
Also, when trying to send text messages, it always says failed to send message and yet the message still goes through because the person I am texting always responds to the message that supposedly failed.
I was wanting to update to Hyperdrive 16 but now I just want to restore my phone to working order. Any help would be so greatly appreciated!
Click to expand...
Click to collapse
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium

sbreen94 said:
Odin back to stock. And then flash rls16
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
The problem is I can't get my phone into download mode to be able to use ODIN. Download mode will pop up for literally one second and then the phone shuts off.

mms
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.

ccsmoker said:
I am on MetroPCS and I can not get mms to work on 16, it worked fine on 13. Please help me.
Click to expand...
Click to collapse
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium

sbreen94 said:
Link me to a stock premium suite ROM for your carrier and I will fix it. I don't have your phone or carrier
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
It will not let me post the link, I am too new to the forum.

Shazam app not working on hyper drive 16.0.0 as well as video recorder.
This is. A great rom. Just I notice Shazam not working. It starts up then exit to the home screen. The S4 camera video recorder not working. Starts. up then turns to fuzz. Then say not able to capture media.

Incoming call volume ringer not working
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.

collettgirl said:
I had previously had the RLS15 rom and it worked great for about a month then all of a sudden my ringer stopped working. Every other sound works. My notifications and media works just fine. So i was forced to flash back to stock rom. I was really disappointed because i love this rom. Then when the RLS16 rom came out i was really hoping this would fix my issue but it didnt. I really dont want to go back to another rom to have my ringer volume work again.
Click to expand...
Click to collapse
Like your phone ringtone?
Sent from my SCH-I545 using xda premium

sbreen94 said:
Like your phone ringtone?
Sent from my SCH-I545 using xda premium
Click to expand...
Click to collapse
Yes my phone ringtone. also when i set my phone ringtone to vibrate and ring. It will just vibrate when someone calls. Thank you for you quick response and trying to help me. Much appreciated.

Tablet/Phablet Mode
Currently running RLS16 and it's running great!!!! Just curious on how I can get the phone to do a tablet mode and/or phablet since there's no hybrid settings baked into the ROM yet. Any help would be apprectiated.

hyperdrive rls16
Have a Verizon Galaxy S3 and followed Roms install instructions: 1.Download latest Hyperdrive Rom version Rls 16
2. Reboot into Recovery
3. Wipe Data/Factory Reset twice
4. Wipe cache and dalvik cache
5. Install Rom
6. Reboot.
But when phone reboots it loads and gets to the language screen and then will reboot and will do that over and over. Have tried it several times and same result did not have that problem with Rls 15. Any Help would be greatly appreciated. Thanks

GPS Fails to Lock (SCH-I535)
First of all, thank you to SBreen for your hard work on this ROM!
I just updated to RLS16 (standard kernel) hoping that it would fix my GPS and google Maps issues, but no luck so far. Below are the methods I have tried in my attempt to fix the GPS:
1) Clean ROM install (four times) including formatting all user/system data, wiping Dalvik cache, etc.
2) Fix Permissions from Clockwork Recovery (countless times)
3) Clearing all app data for google applications, including deleting velvet.apk from system and re-installing through the play store (and using standalone .apks)
4) Tightening the screws on the back of my S3
5) Enabling all location service providers
6) Removing Hyperdrive and restoring to the original ROM (yuck!) restores GPS functionality, so I know it's not physically broken.
I love everything about this ROM with the sole exception of the lack of GPS functionality. Google Maps is currently unusable, and GPS Status will run for hours without acquiring a lock, even with the phone in a stationary position in high-reception areas.
Any help on this issue is greatly appreciated, thanks!

After flashing, were you able to let the phone sit for 5-10 minutes before rebooting and setting it up? I found this crucial to getting the GPS to work...
Sent from my SCH-I535 using xda app-developers app

Wifi Automatically turning on
So far so good on rls16. Its great work, and I am digging all the great features and customization options. Performance is smooth. One issue though, which has plagued me on rls15 as well...
My WiFi keeps automatically turning itself on. It happens when the screen is off and has been sitting on my desk for a while, also happens while I am using it. I believe it is supposed to turn on and then off when downloading mms data, but that is not the case here. It wouldn't be an issue, except it is connecting me to the open network here in my office, which I need to sign into on a web interface every time I connect. The WiFi signal is very, very poor so I prefer not to connect. Any ideas?
Thanks!

RLS16 problem
I have been using rls15 with no problem except for the initial install with the Samsung activation. I love your builds they really bring out the capabilities of the device. I updated to RLS16 and the activation problem came back and also I'm now having sms problems. It works well for so long then it starts returning messages saying they failed. I've flashed and wiped 4 times before the install of rom and have tried to install the fix. Still no solution. Any advice? I'm also using att i747

Boot Animation
First, I would like to congratulate you for this wonderful ROM.
Only trouble is; unable to customize the boot animation. I've tried a few applications, but none were successful.
I will appreciate you help. Thank you.
Have a Verizon Galaxy S III