HANDS-ON VIDEO
This is base from the ZTE V987 ported to Cherry Mobile Omega HD 2.0
HOW TO FLASH CUSTOM RECOVERY
You Need to be ROOTED FIRST! Before Proceeding
Download and install the Mobile Uncle MTK Tool in the Google Play Store
Download any of the Custom Recoveries that you have chosen [HERE]
Be sure it is renamed to recovery.img or else it will not be detected
Copy the recovery.img into your SDCARD
Open the Mobile Uncle MTK Tool
Click Recovery Update
You will see the recovery.img in the that screen click that it will prompt “Are you sure to flash recovery!” click OK
Reboot your Phone.
TIP: TO ACCESS THE RECOVERY MODE TURN OFF YOUR PHONE AND PRESS AND HOLD VOLUME DOWN + POWER BUTTON AND WAIT FOR IT TO LOAD THE RECOVERY MODE.
Click to expand...
Click to collapse
DOWNLOAD LEWA OS5
FOR CHERRY MOBILE OMEGA HD2.0
HOW TO FLASH VIA TWRP
Copy the file 4.2.1_LEWA_OS5_29.09.13_04-41-35_signed.zip to your SD Card or Internal Phone Memory
Turn of Phone and press and Hold Volume Down + Power Button to Boot to Custom Recovery
Click Wipe
Click Factory Reset, then Cache, then Dalvik and Android Secure
Click Back button located in the lower right corner
Click Install and look for the file 4.2.1_LEWA_OS5_29.09.13_04-41-35_signed.zip
Wait for it to finish and Reboot
HOW TO FLASH VIA CWMR
Copy the flashable file 4.2.1_LEWA_OS5_29.09.13_04-41-35_signed.zip to your SD Card or Internal Phone Memory
Turn of Phone and press and Hold Volume Down + Power Button to Boot to Custom Recovery
Use the Volume Up, Volume Down, and Power Button to Navigate to the CWMR Interface
{REQUIRED} First Select Backup and Restore, and select OK and wait for it to finish
Next is select Wipe Data Factory/Reset and wait for it to finish
and then select Wipe cache partition
and last is select Install Zip from SDCARD, and look for the file that you have copied on your phone so it depends if you copied it on your internal phone memory or SDcard just choose the right storage.
and look for the file 4.2.1_LEWA_OS5_29.09.13_04-41-35_signed.zip and select it and select YES and just wait for it to finish
Reboot your Phone
Welcome to Lewa OS5
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
it may take 3-5 mins on first boot because it needs to cache all the files
Click to expand...
Click to collapse
ADDITIONAL TUTORIALS
HOW TO ROOT MEDIATEK PHONES USING FRAMAROOT
HOW TO BACKUP STOCK FIRMWARE MEDIATEK PHONES USING MTK DROID ROOT AND TOOLS
Big Credits to this People for the tools and tutorials:
@yuweng
@rua1
@back37
[ORIGINAL POST]
hmm
Is the lewa v5 also can be flashed directly to CM Razor?
cire27rn said:
Is the lewa v5 also can be flashed directly to CM Razor?
Click to expand...
Click to collapse
you still need to port some files to make it compatible for razor
system ui stops while opening apps and games in landscape mode
I have ported this lewa rom but system ui always
stops in landscape mode....pls help if someone
knows how to fix it
rnovino said:
you still need to port some files to make it compatible for razor
Click to expand...
Click to collapse
can u help me
Related
Hi, I have just bought the STAR N9770 - 5.08 inch MTK6577 . I am relativly pleased with it but love to install cwm and root, but to be honest I'm a little confused as to what files I need.
I am not new to flasing rom/cwm/rooting but have always had HTC phones.
Can someone please help me with what files I need and where to get them and how to do it, I realise this is a lot to ask but I don't want to screw it up.
This is my phone, it running jb 4.1, this was how it came.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
[/IMG]
Root help
---
Do you have a recovery there? Maybe try making a backup and flashing a root binary from a different device (galaxy for instance). I heard it sometimes works and if not you have a backup.
BTW - How is this device? Seems solid?
Sent from my NexusHD2 using xda app-developers app
---
root script?
---
root via factory recovery
1.copy CWM-SuperSU-v0.93_tirannozaurus_madnorb.zip (post #107) to the sdcard of your n9770 phone
2.boot into stock recovery (power btn+ volume up).
3.press menu key to show menu
4.select update from sdcard menu point (navigate with vol keys)
4.select zip file and press the ok/home button (front middle button on your phone)
reboot
the zip file is CWM-SuperSU-v0.93_tirannozaurus_madnorb.zip
thnx madnorb post #107
http://forum.xda-developers.com/showthread.php?t=1825332&page=11
you do it on your own risk
I use this tutorial http://forum.xda-developers.com/showthread.php?p=38337401
Sent from my GT-I9300 using xda premium
---
update:
---
CWM RECOVERY and ROOT!
---
I'm getting a 'Download Warning' on my PC
It says:
Not ALL images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?
Any ideas what to do from here?
---
Thanks for the offer. I've sent the phone back
3G didn't work at all. I'll wait until the next one arrives and start the process again.
---
CWM Recovery & Root
I have successfully flashed a CWM recovery and root script on this phone. Everything works. Here's how its done:
Here is the "About" under settings on the phone that i have done this on:
First Download This:
http://www.mediafire.com/?eq9b28ua89wh8d1
This RAR Archive contains everything needed.
MAKE SURE YOUR PHONE IS ON JELLYBEAN. [4.1]
1: Installing CWM Recovery
Extract the downloaded zip and run the flash tool. (Flash_tool.exe)
In the flash tool, click where it says "scatter-loading", and browse for "MT6577_Android_scatter_emmc.txt" [It is in the: \CWM_recovery_4.1\recovery folder that was included in the downloaded archive]
Now, before flashing, MAKE SURE "RECOVERY" is the only thing ticked in the list of things to flash.
(Mine had two things ticked by default, just make sure the only thing that is ticked is the recovery.)
When the scatter file is loaded and only recovery is ticked, make sure your phone is off and the battery is out. Also make sure it is unplugged from the computer.
Now in the flash tool, click the download button at the top.
*Note: If you get: "Not ALL images are correctly loaded, which may cause boot up issue!
Do you still want to go on downloading anyway?", Just click "Yes"
Plug in your phone with the battery out and wait for it to finish flashing. If the flash tool doesnt detect the phone, it means the drivers probably aren't installed. install the drivers [included in download (MT6575_USB_VCOM_drivers)] and wait for it to finish flashing
When it flashes, you will get a popup window with a circle, showing that it has completed. you can now unplug your phone.
CWM recovery is now installed on the phone. Time to root!
2: Rooting VIA CWM Recovery
Copy the "CWM-SuperSU-v0.93_tirannozaurus.zip" to your phone's SD card.
Boot the phone into recovery. [hold volume+ and power while the phone is off]
Choose "Install zip from sd card" [using volume and power buttons] and navigate to "CWM-SuperSU-v0.93_tirannozaurus.zip"
Flash it, and then reboot the phone. You should now have root:
If you follow all of this properly in order, this should work! i am not responsible for anyone bricking their phone. Doing this is all on you.
*NOTE*
If your play store is not working [If it says there is no connection], Goto your phone's settings and set your date and time. This fixed it for me.
Also, credit to the original authors of the files. I have simply taken the required files and archived them for your convenience.
Proudly Present Various Recovery again for Intex Aqua Sx
Click to expand...
Click to collapse
How to install CWM/COT/TWRP recovery in your device
Click to expand...
Click to collapse
Screen Shots is Proof That recovery is working and tested
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
SP Flash Tool method, root not required
Click to expand...
Click to collapse
Make Note :- Posted Screenshots not for Intex Aqua Sx its only for an Example’s
Click to expand...
Click to collapse
1. Download MTK6575 Drivers.zip and unzip/extract on your Windows PC, just run InstallDriver.exe to install drivers.
2. Download Your Choice from here COT/CWM/TWRP which u want in your devie
COT Recovery v2.1 + scatter.zip
TWRP Recovery v2.3.2.3 + scatter.zip
CWM Recovery v6.0.2.7 + scatter.zip
and SP_Flash_Tool_v3.1220.02_FOR_S101A.zip , unzip/extract them.
Click to expand...
Click to collapse
3. Now open extracted SP Flash Tool folder and run Flash_tool.exe
4. Click on "Scatter-loading" button which is on the right side below Downloading Agent. A new window will open. Browse to the extracted CWM Recovery v6.0.1.5 + scatter folder and select MT6575_Android_scatter.txt file.
5. Flash tool will populate the Map file on the application window. You will see multiple entries. Uncheck all entries except for RECOVERY.
6. Now click on "Download". Warning message will occur, but ignore that and click Yes.
7. You will see in the status bar below "Searching", now connect your phone (with battery inserted + Press and Hold Volume Up Key) via the USB cable.
8. Wait for the process to finish and then you will get a window showing green circle.
Some SS Tutorials for how to flash CWMR using SP Flash Tools
Click to expand...
Click to collapse
Check here all steps
Click to expand...
Click to collapse
Congrats You have flashed Latest Recovery in your Device !
Note: If you get any error in SP Flash Tool, then recheck your MTK drivers installation or manually install them through device manager.
Booting into CWM recovery is the same as in the stock recovery. Switch on the phone with "Volume Up" and "Power" button Pressed. The Phone will boot into CWM!
I have also attached the the Stock Recovery.zip.
Credit : -
bgcngm
yuweng
Cygwin
Me
dont say Thanks Hit
if you can
Click to expand...
Click to collapse
Reverse
recovery request for aqua trendy
plz provide the stock and custom recovery for intex aqua trendy
BHARDIK said:
Reverse
Click to expand...
Click to collapse
How to root intex aqua sx plz help me
How can I port TWRP of one phone to another phone of same specification (cpu and screen. Resolution)
Thanx
Root your android with unlocked bootloader via stock recovery easily.
Working from eclair to jellybean.
HOW TO:-
1.)Download file BELOW.
2.)Place update.zip in / folder (main folder) of your Internel Sd card.
3.)Switch off phone and boot in Recovery (you should know how to).
[Power on + volume up +volume down for micromax canvas phones.]
4.)Choose option to
Apply update.zip from sdcard.
To change options, press volume up and down.
To select any option, press power buttons .
5.)Let it complete.
A yellow line will appear and thean a message will come "Installation complete"
DOWNLOADS:-
How to unroot:-
1.)Download this file and place in sdcard.
2.)Flash via recovery like you rooted.
Flash recovery in mediatek devices
How to flash recovery on mediatek devices:-
1.)Download the Recovery meant for your device.
2.)Rename it to recovery.img(or whatever) and transfer it to your sdcard.
3.)Download MobileUncle MTK Tools from play store.
4.)Select the option "Recovery Update" from the app, and then when it ask for path, guide it to where you transferred the file to your sdcard.
5.)Your phone will reboot into recovery. Congrats.
6.)You can boot into the recovery at any time by switching off your mobile, and then pressing and holding volume down, volume up and power button till the screen lights up. From there you will have the option to go the the recovery mode.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
OR
Credits= http://www.droidiser.com/2012/11/clockworkmod-port-micromax-a110-how-to.html
r32222222
2222222222222222
How to use boot in recovery mode?
There is no zip file for download?
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Shambumon555 said:
How to use boot in recovery mode?
There is no zip file for download?
Click to expand...
Click to collapse
Check again, its there to download. btw, use power button+volume up+volume down
eagledipesh said:
I guess you need to flash a CWM / TWRP recovery using SP Flash tool.
Correct me if i am wrong.
Click to expand...
Click to collapse
method given in post no.2 can also be used.
Please help me to root Intex Aqua Wonder2 ....
Sent from my Spice Mi-425 using xda app-developers app
Here i ported one more ROM to Karbonn A16.
This time it is based on iOS.
removed all Stock icons and replaced them with iOS icons.
Boot logo and boot animation changed to iOS
smooth ROM
Pre Rooted but you have to flash latest SuperSU zip through CTR recovery.Download them from here
all Setting Menu everything is copy of iOS
DUAL SIM support
3G
Video call support also
Bugs:
The major bug is related to storage. actually script changed the whole device storage capacity to 90 GB and changed RAM size to 4GB those are showing in setting menu but in actual device storage and RAM sizes are same as product build 4GB ROM and 512MB RAM only.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Requirments:
1. Rooted Device
2. First of all Take backup of your IMEI NVRAM part as this ROM can damage that partition. Use this GUIDE(Click here to seee guide) to take backup of your current IMEI NVRAM.
This is important step otherwise you will lost your one SIM slot.
first of all download mtkdroid tool from here ----> DOWNLOAD
Now Extract this rar file with winrar or any winrar software.
connect your device, make sure you have usb debugging mod on.
now click on root button on MTKdroid tool to get root access, this is not a necessary step, grant the access on mobile.
You will see all details regarding your device.
Now click on IMEI/NVRAM button, you will see following screen
where select backup and backup your IMEI and NVRAM
HOW TO Restore them?
Just connect your Mobile while USB debugging mode on.
now RUN MTKdroid tool.
Now you will see your device details there.
so choose ROOT button and grant root access in your device.
now you will see IMEI/NVRAM button will active.
now choose it and you will below Backup and Restore buttons are active if you already did a backup as above guide.
Now simply choose Restore and first choose bin file and in next dialoge box choose .tar file.
NOW click on Reboot and you are done
3. Download KiOS zip file from here.
(DOWNLOAD KiOS from Here)
4. Install CTR recovery on your Karbonn A16. follow this guide
Make sure you enabled USB debugging mode in your device. To know how to enable it just google it.
Now download CTR recovery installer for windows from here====> DOWNLOAD
now install this software.
now connect your mobile to pc
RUN CTR V2.4
now choose easy installer for mediatek device and auto and follow the instructions\
finally you will reboot into ctr recovery.
Guide to Install KiOS In Karbonn A16
First of all take backup of your current IMEI and NVRAM according above guide
1. Copy Above downloaded KiOS zip file and place it into your internal storage or external storage.
2. Reboot into recovery, use adb commond "adb reboot recovery" or press volume up with power button and choose recovery.
3. now you will boot into CTR recovery.
4. go to Mount section and choose format system.
5. After format choose mount system.
6. now go to wipe menu and do factory reset and wipe delvik cache.
7. now install KiOS_v1.0 Zip file.
8. when done pull out your battery and reinsert battery and restart device.
9. Your device will booted normally but you will not able to see Dual SIM right now so use this Guide to restore your DUAL SIM card setting...
Team Win Recovery Project 3.x.x is a custom recovery built with ease of use and customization in mind. Its a fully touch driven user interface no more volume rocker or power buttons to mash. The GUI is also fully XML driven and completely theme-able. You can change just about every aspect of the look and feel.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Prerequirements:-
1. Your Bootloader must be unlocked. Here is the guide
2. Internal Storage will be wiped.
Bugs:-
1. Battery Percentage doesn't show
2. You tell me
Instructions:-
1. Go to the fastboot mode.
2. Now paste the recovery in adb folder.
3. Open the cmd by holding shift and press right click in adb folder and then click open command promote here.
4. Now to confirm that device is connected properly type:-
Code:
fastboot devices
You'll get your device serial number there.
5. After that type:-
Code:
fastboot flash recovery twrp-3.1.1-0-marino.img
Voilà TWRP flashed successfully.
6. Now unplug your device and then hold power button for 2 secs and then hold volume (-) after that press power button once.
Now you'll find yourself in TWRP.
Enjoy
Links - https://drive.google.com/uc?id=1JYzRlnfLRJRsw3flQhXaorSxeqS5umRK&export=download
Note:- After flashing recovery you must have to wipe Internal Storage to remove encryption. Also, you must have to flash magisk so that it will patch boot.img through which system will not be able to overwrite TWRP again.
Credits:-
Gaurav
Dhruv Agarwal (me)
thanx a lot brother for working on it ..
may be we will get a custom rom soon ???
Finally, something for k8 plus users,
Is there any safe way to relock bootloader after unlocking and flashing this recovery, if I want to take my device to service centre
Thanx
What is the dycrept password?
biswajitpaik said:
What is the dycrept password?
Click to expand...
Click to collapse
Click on cancel
Any news about ROMS??? ??
Any news about ROMS??? :fingers-crossed:
Great work sir
Gonna test it now
Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
I've tried everything, first of all wipe /format data for showing internal memory and otg but when I wanted to flash any file through recovery like xposed it had shown decrept password?
not working ...after flashing not able to go to twrp screen pls help
not working ...after flashing not able to go to twrp screen pls help
Plz help how to root Lenovo k 8
Help
Dhruv_Agarwal said:
Click on cancel
Click to expand...
Click to collapse
Hi i am a newbie to rooting. Could you please give me detailed steps. I understood till the point of flashing twrp. After that do I have to wipe data and flash magisk right then? (I have tried installing twrp 2 times but every time after installing and restarting it shows android recovery only.)
One more thing, will I be able to upgrade to oreo through OTA if I have the stock android recovery, since twrp is replaced by stock recovery every time ( although bootloader is unlocked)?