Good afternoon guys.
So,i try to flash my phone but it says i must enable unknown sources and debuging,but this is not possible,since we are stuck on SONY logo.
fastboot says that the device needs to be rooted first.
SEUS says that my phone uses the latest software,so nothing there.
Also,im not sure if im flashing my phone the proper way,its been a while since i installed HD.
I used Xperia Ultimate HD 2.0.3
so,any help on booting my device?
If possible,i would like to suggest me a better HD version ( i downloaded 5 ) with the proper kernel version..
thank you in advance.
Related
Hi, a couple of weeks ago i rooted my xperia x8, and had it all working using super oneclick, back then it all worked fine, anyway, the other night i happend to go on the update section of sonyericsson software and it advised me that there was an update, me not reaslising i updated the phone completly forgetting that it would delete everything, basically it unrooted my phone, and reset the software to an updated version with a few new apps and stuff. ... i cant recall what the software number was before but my current software is (2.1 update1, baseband version = m76xx-tsncjolym-53404015, kernel version, 2.6.29, SEMCUser SEMCHost #1, and finally build number 2.1.1.a.0.6, ive tried every version of Superoneclick and it just dont want to root anymore, its keeps looping and looping forever.. its really making me mad because if i cant root it now then im stuck with this stupid S.E software on it.. could anyone enlighten me why this has happend, if so what i could do to fix it.. and or whether it was because of the new version that i upgraded to and sony ericsson had blocked it or something?? Mat2k2010
2.2.1 CyanogenMod Floyo v0.11
Hi! Maybe that the mistake is at me, but for me this it mondta( 2.2.1 CyanogenMod Floyo v0.11), that the memory the safe removal of a card, restarted then :S. All this kb 15perc after a usage. One 16GB-Class digs 4 microSD-t I am useful, FAT32 and EXT2 partitions. Help me plz...
The flash tool for 2.6 kernel is located here. if you follow the forum it will provide all necessary information and software. Happy hacking
http://forum.xda-developers.com/showthread.php?t=920746
Hello,
I recently acquired a Xperia X8 and tried to install a CFW, but i have some issues
So far, as i understood, i'm on android 2.1 root, using xrecovery, my baseband is 015, build 2.1.1.A.0.16, the cell is the international version ( not the american one ).
I tried to install FroyoBread v023b and i also tried the GingerDX v017, following closely the guides, and no matter what i try, i end up always stucked at the logo ( either froyobread or i don't remember what is written on the second one ). My x8 simply freeze at these logos, and i finally go again to the xrecovery menu, restoring my backup and am still on 2.1 root.
If anyone have an idea of where i did wrong and how to make me install finally one of these roms, it'd be really nice =)
Thanks
reply
hy my friend.i have also xperia x8 and after i lnstalled xrecovery,i installed cyanogen mode 7 and everything were ok.....try to install this first and then install gigner dx....i hope this helps u!!!!
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
I tried to install a CFW too, i'm on android 2.1 Rooted and xRecovery installed , my baseband is 015, build 2.1.1.A.0.16,
I tried to install the GingerDX v017, I install rom manager and when I try to install CWM there is not X8 on phone list.
I sucesfully install Fdxperience with xrecovery and restore to 2.1...
Help me with Rom manager, CWM and GingerDX v017please!
Thanks!
Well, i tried to redownload the rom and install it in case i could have a problem with the file i downloaded ( i doubted of it but who knows u_u ), same problem. i still am freezing at the froyobread logo
- Edit -
I tried just now with another rom, installed using the recovery system, and weirdly, its the same, i freeze at the logo Hackdroid this time...
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Iwo66 said:
If I install GingerDX v13 with xrecovery, is it possible to upgrade it to v17 without CWM?
Click to expand...
Click to collapse
man, nothing personal, but could you create your own thread for your problem please ^^it'll avoid this one to become messy
i rather keeping my thread clean, i won't be able to help you and am myself in need of help
thank you for your understanding =)
Ok, sorry!
Trefle said:
well, it worth a try ^^ if i can ask you the link of cyanogen mode 7 you used please ^^
Click to expand...
Click to collapse
take a look here.... android-xperiax8.blogspot.com/2011/06/rom-froyobread-by-doixanh.html
ok i found out the problem... it was the µSD that was causing issues... i removed it, i booted... then i partitionned it a second time ( maybe the ext 2 part was a bit too big and made crash the FW first launch, who knows )
- Closed -
Hello!
I'm new in this forum and a noob in smartphones... But I don't like my Xperia arc s android, 4.0.4, and I want to put 4.3 jelly bean on it. So i google how to do it and found this tread http://forum.xda-developers.com/showthread.php?t=2397236.
I downloaded the newest cm 10.2 anzu and put it on my phone. Then I root my phone and tried to do what it says in there, to use flashtool and rom the boot.img file. I did that and it didn't do anything. I also tried do iniciate my phone in recovery mode and was also unnable to do so.
I want you to teach how to do this if you have the time and patience to do so
Hi, a few months ago I decided to install a custom ROM on my Sony Xperia Z1. In order to do that I first followed [1] to install a custom recovery (I think I followed the tutorial pointed by the link, but I did that a few months ago so I might be wrong). This way or another I installed a custom recovery - now when entering recovery it says: PhilZ Touch 6.59.0, ClockworkMod v6.0.5.1. Unfortunately I didn't have time to play with it and finally I didn't even install any custom ROM. So my Z1 is now on 14.5.A.0.270.
Now I'd like to use the standard OTA upgrade to move to Android 5.1 (14.6.A.1.236) and my Z1 offers me that. But once downloaded the upgrade cannot be installed for some reason (I suspect it's the custom recovery). When the upgrade procedure starts it asks me to reboot the phone, after a while the Android guys and a progress bar shows up, but it stops after like 10% of the progress bar. Once booted back to normal operation the phone says there was an error upgrading software.
So I'm trying to figure out how to bring back the stock recovery hoping that it would solve my problem. I thought about using Xperia Flash Tool (aka Emma) to flash a generic ROM for my Z1 which would hopefully also contain a stock / generic recovery but the tool requires an unlocked bootloader. Unlocking the bootloader would force me to loose my DRM keys and so on. I don't want to follow this path. Is there a way to restore my phone back to its original state before installing custom recovery so that it was able to use OTA upgrades? I'd simply like to use all stock firmware to avoid further complication.
I know it's probably strange to ask on instructions on going back to pure stock software on such forum but you're my last resort.
[1] http://forum.xda-developers.com/showthread.php?t=2261606
XDA Visitor said:
Hi, a few months ago I decided to install a custom ROM on my Sony Xperia Z1. In order to do that I first followed [1] to install a custom recovery (I think I followed the tutorial pointed by the link, but I did that a few months ago so I might be wrong). This way or another I installed a custom recovery - now when entering recovery it says: PhilZ Touch 6.59.0, ClockworkMod v6.0.5.1. Unfortunately I didn't have time to play with it and finally I didn't even install any custom ROM. So my Z1 is now on 14.5.A.0.270.
Now I'd like to use the standard OTA upgrade to move to Android 5.1 (14.6.A.1.236) and my Z1 offers me that. But once downloaded the upgrade cannot be installed for some reason (I suspect it's the custom recovery). When the upgrade procedure starts it asks me to reboot the phone, after a while the Android guys and a progress bar shows up, but it stops after like 10% of the progress bar. Once booted back to normal operation the phone says there was an error upgrading software.
So I'm trying to figure out how to bring back the stock recovery hoping that it would solve my problem. I thought about using Xperia Flash Tool (aka Emma) to flash a generic ROM for my Z1 which would hopefully also contain a stock / generic recovery but the tool requires an unlocked bootloader. Unlocking the bootloader would force me to loose my DRM keys and so on. I don't want to follow this path. Is there a way to restore my phone back to its original state before installing custom recovery so that it was able to use OTA upgrades? I'd simply like to use all stock firmware to avoid further complication.
I know it's probably strange to ask on instructions on going back to pure stock software on such forum but you're my last resort.
[1] http://forum.xda-developers.com/showthread.php?t=2261606
Click to expand...
Click to collapse
Hello, and welcome to XDA!
Wow, this recovery's install is pretty much a toolkit! What I don't get is why it doesn't offer to back up the original recovery. Oh, 'cos Sony does not have a stock recovery.
This post should help. Or this post (for navigation purposes).
Any questions, you can post in the following thread (once you have an XDA account):
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting > I can't enter Recovery mode what should I do
Or..
> Sony Xperia Z1 > Xperia Z1 Q&A, Help & Troubleshooting > Sony Xperia Z1 Ask Away help thread.
Hope this helps, and good luck!
I tried systemless root and after that my phone was only showing sony logo for sec. I tried to install this rom:
https://forum.xda-developers.com/m4...aosp-7-1-1-sony-xperia-m4-aqua-ss-ds-t3558111
it kind of woks but not for daily use. After that i tried CyanogenMod 13.0 but I need original system and with it my phone only loops with sony logo. If anyone knows hot to flash/install original android version or rom that could be used daily it would be huge help.
thank you for your help.
endrom said:
I tried systemless root and after that my phone was only showing sony logo for sec. I tried to install this rom:
https://forum.xda-developers.com/m4...aosp-7-1-1-sony-xperia-m4-aqua-ss-ds-t3558111
it kind of woks but not for daily use. After that i tried CyanogenMod 13.0 but I need original system and with it my phone only loops with sony logo. If anyone knows hot to flash/install original android version or rom that could be used daily it would be huge help.
thank you for your help.
Click to expand...
Click to collapse
There are a few stock roms in your devices Android Development section in the forum you could try. Here's a random one I spotted that seems like a good option:
https://forum.xda-developers.com/m4-aqua/development/rom-6-0-1-xperia-m4-aqua-t3423264
The key is to go with a stock, or stock-based, rom for the best stability.
Or you could reflash the actual, official, stock rom from Sony themselves. They have a tool called Xperia Companion that can reflash the latest rom on any Xperia device with a locked bootloader: http://support.sonymobile.com/gb/tools/xperia-companion/
If your bootloader's unlocked, you might be able to use "Emma" instead: https://developer.sonymobile.com/open-devices/flash-tool/use-the-flash-tool-for-xperia-devices/
Hope this helps!