CWM Recovery
I have ported a CWM Recovery for our device..
I have posted this to help those noobs like me who are looking for CWM for MyPhone A848i Duo(Wiko Cink Slim of france)..
I am not LIABLE for your bricked device, you have been warned!
Requirements:
Your phone must be rooted
You need to download and install Mobile Uncle Tool at Playstore or Google it..
How to Install:
Download Attached File
Copy/Save file to your SD Card
Open MobileUncle (grant root permission)
Tap on Recovery Update
Select Alpha_CWM_Recovery.img
Select OK
Then Reboot
How to boot device on recovery:
Turn off your device
Hold Volume up and Volume down while pressing Power button (for about 5 seconds)
When Recovery Mode/Factory Mode appears, Press Volume Up button to enter Recovery mode
Then use Volume Up to navigate Recovery Mode option
Volume Down to Select Recovery Mode. done! :good:
STOCK JELLY BEAN ROM FOR MYPHONE A848i (Flashable via CWM)
This is flashable thru CWM..
Download: HERE!
**Mirror Link will be added soon...
How to Install:
Download Stock Rom
Copy/Save file to your SD Card
Go to CWM recovery using Mobile Uncle(playstore) or press and hold vol up +vol down + power button(then go to recovery mode), in case you don't have mobile uncle tool.
Wipe data/ factory reset, wipe cache then go to advanced then wipe dalvik
Flash or Install JB ROM V.2.7.zip then wait until completed then reboot to system
Done!
Credits:
Master Yuweng (http://forum.xda-developers.com/showthread.php?t=1825722
Master Carliv
Master Nolinuxnoparty
Related
First of all, you agree that you are doing
this in your responsibility, be careful how
you use this recovery. If anything goes
wrong it's your own fault.
Instructions:
1. Enable USB Debugging by going to
Menu -> Settings -> Applications ->
Development - Enable USB Debugging.
2. Download the CWM Recovery file + scatter file
recovery file download from here and scatter file from attachment
http://forum.xda-developers.com/attachment.php?attachmentid=1358551&d=1348750752
3.here is tutorial how to flash cwm recovery on mmx a45 using sp flash tool
http://droidpunk.wordpress.com/2012/10/02/how-to-use-sp-flash-tools-for-mmx-a45-3/
4. download all mtk drivers from this post
http://forum.xda-developers.com/showthread.php?t=1684690
4. Switch off your phone.Then boot into
recovery mode, you should be familiar if
you have rooted your phone. If not, then
hold Volume up button + Volume down button + Power button simulatenously.
5.After you boot int Recovery, you can
only use buttons to move. For up/down
use volume up/down, to do a selection
you press the Search button.
note:- put scatter file and recovery files in same folder
credit goes to prashanthca he make cwm for mmx a45
http://forum.xda-developers.com/member.php?u=4860387
sahil11 said:
first of all, you agree that you are doing
this in your responsibility, be careful how
you use this recovery. If anything goes
wrong it's your own fault.
Instructions:
1. Enable usb debugging by going to
menu -> settings -> applications ->
development - enable usb debugging.
2. Download the cwm recovery file + scatter file
recovery file download from here and scatter file from attachment
http://forum.xda-developers.com/attachment.php?attachmentid=1358551&d=1348750752
3.here is tutorial how to flash cwm recovery on mmx a45 using sp flash tool
http://droidpunk.wordpress.com/2012/10/02/how-to-use-sp-flash-tools-for-mmx-a45-3/
4. Download all mtk drivers from this post
http://forum.xda-developers.com/showthread.php?t=1684690
4. Switch off your phone.then boot into
recovery mode, you should be familiar if
you have rooted your phone. If not, then
hold volume up button + volume down button + power button simulatenously.
5.after you boot int recovery, you can
only use buttons to move. For up/down
use volume up/down, to do a selection
you press the search button.
Note:- put scatter file and recovery files in same folder
credit goes to prashanthca he make cwm for mmx a45
http://forum.xda-developers.com/member.php?u=4860387
Click to expand...
Click to collapse
hi dear all a45 user
i create a rom for a45 ,
but i dont have micromax a45 device so need test before release
so...... Please pm me here for test
[email protected]
[email protected]
minimum requirments
1. Cwm installed
2. Make sure that u have created nandroid backup of your stock rom in your sd.
...
BHARDIK said:
hi dear all a45 user
i create a rom for a45 ,
but i dont have micromax a45 device so need test before release
so...... Please pm me here for test
[email protected]
[email protected]
minimum requirments
1. Cwm installed
2. Make sure that u have created nandroid backup of your stock rom in your sd.
Click to expand...
Click to collapse
when u make rom for a45 u get bootloop and rom flashing method is different for mmx a45 my rom also ready
ok then tell me that methods u got, i just wanted to know.
Sent from my A90S using xda premium
I just wanna share
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below)
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
Press (Power + Volume Down) to entry CWM Recovery (Install from CWM)
5. Choose apply update from external storage in the option menu (Install From Stock Recovery)
Choose Install zip from sdcard (Install from CWM)
6. Find a CWM file was downloaded earlier then reboot (Install From Stock Recovery and Install from CWM)
Installation Root
1. Download SuperSU
2. Connect your USB to your phone then copy superuser file from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry CWM Recovery
5. Choose Install zip from sdcard then choose zip
6. Find a superuser file was downloaded earlier then reboot
thanks for sharing:good:
Tutorial fixed
Tried this several times and comes with nothing, I followed tutorial really carefully. The install process through stock recovery running and it said finished, but when I tried to reboot again the CWM Recovery not installed. And then I figure out that the tutorial uncompleted.
So here it is the fixed Tutorial for Root and CWM Hisense HS-EG909 / AD683G
Installation CWM Recovery (ClockWorkMod)
1. Download file (you can select one of below), remember theres is two type of CWM Recovery. One is a CWM/CWM Touch Recovery, and others is CWM Recovery-Temporary
CWM-6.0.2.3.zip
CWM-6.0.2.3-temp.zip
CWM-6.0.2.3-touch.zip
Stock-Recovery.zip
2. Connect your USB to your phone then copy CWM file (both of them :CWM-6.0.2.3.zip and CWM-6.0.2.3-temp.zip)
from your computer to your SD Card
3. Turn Off your phone
4. Press (Power + Volume Down) to entry Stock Recovery then wait until the pictures come out Android then press Home (Install From Stock Recovery)
5. Still in Stock Recovery choose apply update from external storage in the option menu, install CWM-6.0.2.3-temp.zip.
In this state you are in CMW temporary condition, your screen will flicker often but it is okay because this just temporary. You can use volume "up+down" to navigate, "home" for menu and "search" for select.
6. Find a CWM-6.0.2.3.zip file and then install.
7. After it to makesure you can choose Advanced/Reboot into recovery mode. And your device should be reboot into CWM Recovery "Permanent Mode", your screen will not flicker again.
Sorry if this bother TS, I just hope if theres another person see this tutorial so they would not confuse like I did.
STOCK RECOVERY FIRST TIME FOR A500 CLUB MOBILE(TESTED !!! WORKING !!!)
INSTRUCTIONS:>>>
-Copy downloaded recovery.img to SDcard
-Download and install Uncle Tools from Playstore
-Open Uncle Tool
-Select Recovery update option
-Select the downloaded recovery.img
-Press Ok twice
TO BOOT IN TO RECOVERY >>> SWITCH OFF YOUR A500 CLUB..
PRESS AND HOLD VOLUME UP+POWER KEYS TOGETHER ..
CWM 5.0.4.8 Advanced Edition / MIUI Recovery 3.0
Whats New?
IN MIUI RECOVERY:
1.Awesome UI(like aroma)
2.Advanced backup
3.Phone information
4.Power Off
IN CWM RECOVERY:
1.Mount USB storage
2.Power Off
3.Wipe Battery Stats
4.apply update from slide load
Downloads
CLICK HERE TO DOWNLOAD MIUI RECOVERY
CLICK HERE TO DOWNLOAD CWM RECOVERY
Instuctions to Flash :
* Install the required packages like adb.
*Now Open Phone in fastboot mode using volume down +power
*Connect your phone to PC using USB cable.
*Now open the adb folder & inside that folder press & hold the Shift key + right click on blank space & choose Open Command Window Here.
*Now download the given img file,rename it to "recovery.img" and put it into the adb folder
*Now a black cmd window will open, there type
Code:
fastboot devices
*This should display your device name in fastboot mode, if nothing is shown, then you have to check previous steps again.
*Now Type
Code:
fastboot flash recovery recovery.img
*Do the same procedure to flash both the recovery
*Thats all u r flashed now u can take a bear lol
Alternate:
*Download Mobile uncle tools
*Put recovery in root of sdcard (/sdcard/)
*Now goto Mobile uncle tool & select recovery update & select ur desired recovery
*Now flash it
Credits:
>Hadi Khoirudin for compiling miui recovery to Sc6820
>Sandeep & team ninja for Compiling Advanced CWM for mmx a26
>ofc me for porting both recoveries to Mmx A35/A27
IF U LIKE MY WORK HIT THANKS
awedome dude.....
Nice one pritish bro
how to boot into recovery mode
Hi,
I have S2 plus phone from friend with stock 4.2.2 ROM installed. Can someone recommend me tutorial I can follow and ROM that is stable enough for daily usage?
Thx,
Rooting process:
1. Download Odin,CWM recovery and SuperSU zip from the following links:
https://www.androidfilehost.com/?fid=95916177934547981 - Odin
https://download.chainfire.eu/696/supersu/ - SuperSU zip
http://d-h.st/bq8 - this is CWM for GT-I9105 model(the one without NFC)
http://d-h.st/II4 - this is CWM for the GT-I9105P model(the one with NFC)
2. Next copy the SuperSU zip to your phone and reboot it into download mode(Hold Volume Down,Home and Power)
3. Open Odin and select PDA and choose your downloaded recovery and un-check auto restart
4. Press Start and when it finishes take out the battery
5. Enter recovery by holding down volume up,home and power
6. Once you are in recovery install the SuperSU zip and reboot your phone
Yay you are now rooted!
And the ROM I would recommend using is either XOSP 6.3 or Resurrection Remix