[Q] Hard Brick Tipo - Sony Xperia Miro, Tipo (Dual), J, E

The case:
I was trying to install a new Rom, when accidently after the last step,i.e,mounts and storage>>format system, I restarted the mobile by habit. Then it got stuck at sony logo. So i opened my flashtool and flashed the stock ftf .22 version. All went well and i had my stock rom installed. Then i installed cwm and rooted the phone. After that i wanted to install the .27 paradox rom. I formatted the whole phone again.But after that,i realised that i forgot to insert my memory card where it was stored. So i went back to flashtool to flash the stock .22 ftf again. Now,the phone got stuck in the same process and this is My log:
21/005/2013 01:05:31 - INFO - <- This level is successfully initialized
21/005/2013 01:05:31 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/005/2013 01:05:31 - INFO - You can drag and drop ftf files here to start flashing them
21/005/2013 01:05:36 - INFO - Device disconnected
21/005/2013 01:05:37 - INFO - Selected st21i_11.0.A.4.22_Generic.ftf
21/005/2013 01:05:37 - INFO - Preparing files for flashing
21/005/2013 01:05:43 - INFO - Please connect your device into flashmode.
21/006/2013 01:06:33 - INFO - Device connected in flash mode
21/006/2013 01:06:33 - INFO - Opening device for R/W
21/006/2013 01:06:33 - INFO - Reading device information
21/006/2013 01:06:33 - INFO - Phone ready for flashmode operations.
21/006/2013 01:06:34 - INFO - Current device : ST21i - YT9002PHA6 - 1264-4250_R4D - 1261-1516_11.0.A.4.22 - WORLD-i_11.0.A.4.22
21/006/2013 01:06:34 - INFO - Start Flashing
21/006/2013 01:06:34 - INFO - Processing loader
21/006/2013 01:06:34 - INFO - Checking header
21/006/2013 01:06:34 - INFO - Flashing data
and then it stucks at 0% for ever. Interestingly after the last line, i.e Flashing data, the green LED goes off of the phone. I kept the mobile on for the whole night and the battery fully drained this morning. I put the mobile on charging, then it shows green LED and nothing(no vibration). I do have an unlocked bootloader and so i cant repair it through sony update service.
note: whenever i tried to charge it through the wall charger previously,it displayed the green LED. What to do now??? is my phone dead???? plzz help

Try to install flashtool again.
If doesnt work, try another pc.
Next time, put the rom in internal storage
Sent from my Xperia Miro using xda premium

tukulahon said:
The case:
I was trying to install a new Rom, when accidently after the last step,i.e,mounts and storage>>format system, I restarted the mobile by habit. Then it got stuck at sony logo. So i opened my flashtool and flashed the stock ftf .22 version. All went well and i had my stock rom installed. Then i installed cwm and rooted the phone. After that i wanted to install the .27 paradox rom. I formatted the whole phone again.But after that,i realised that i forgot to insert my memory card where it was stored. So i went back to flashtool to flash the stock .22 ftf again. Now,the phone got stuck in the same process and this is My log:
21/005/2013 01:05:31 - INFO - <- This level is successfully initialized
21/005/2013 01:05:31 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/005/2013 01:05:31 - INFO - You can drag and drop ftf files here to start flashing them
21/005/2013 01:05:36 - INFO - Device disconnected
21/005/2013 01:05:37 - INFO - Selected st21i_11.0.A.4.22_Generic.ftf
21/005/2013 01:05:37 - INFO - Preparing files for flashing
21/005/2013 01:05:43 - INFO - Please connect your device into flashmode.
21/006/2013 01:06:33 - INFO - Device connected in flash mode
21/006/2013 01:06:33 - INFO - Opening device for R/W
21/006/2013 01:06:33 - INFO - Reading device information
21/006/2013 01:06:33 - INFO - Phone ready for flashmode operations.
21/006/2013 01:06:34 - INFO - Current device : ST21i - YT9002PHA6 - 1264-4250_R4D - 1261-1516_11.0.A.4.22 - WORLD-i_11.0.A.4.22
21/006/2013 01:06:34 - INFO - Start Flashing
21/006/2013 01:06:34 - INFO - Processing loader
21/006/2013 01:06:34 - INFO - Checking header
21/006/2013 01:06:34 - INFO - Flashing data
and then it stucks at 0% for ever. Interestingly after the last line, i.e Flashing data, the green LED goes off of the phone. I kept the mobile on for the whole night and the battery fully drained this morning. I put the mobile on charging, then it shows green LED and nothing(no vibration). I do have an unlocked bootloader and so i cant repair it through sony update service.
note: whenever i tried to charge it through the wall charger previously,it displayed the green LED. What to do now??? is my phone dead???? plzz help
Click to expand...
Click to collapse
When you unlocked the bootloaer, did you save the DRM keys with this tool: Backup TA for Sony Xperia
I did a mistake installing a kernel from Sola in my Tipo (my wife has a Sola and I had some kernels in the same folder...) and could save it replacing the saved keys and relocking the bootloader.

Have you tried to flash kernel one more time, and then flash the stock rom? Flash stock kernel, and give us the log

Related

Bricked x10

Hi, first of all, i know there are lots of post about bricked phones, trust me, i've seen most of them but none of it helped me and i am kind of fraking out. I got a Sony x10 a few weeks ago and I loved it. I upgraded it to Andoird 2.3.3, rooted it, installed xRecovery, etc. But yesterday I tried to install Android ICS, for that I had to unlock bootloader. Read a lot of post and started, and finally used a method which uses kernel downgrade, a batch program and the kernel upgrade, but guess what, it didn't work, couldn't flash kernel upgrade after all. What freaks me out is that I can't install any ftf either, flashtools keeps showing ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". Tried using update service, tried with many ftf files and flashtools. Nothing happens. Phone just vibrates a little bit longer than normal when I turn it on and nothing else. It also turn the green led on when connecting to the charger and flash mode seems to work.
I am desperate, I had to do a lot to get a phone like this and now it doesn't even boot with the SE logo. Thanks and I hope someone has the solution.
I forgot to put this:
11/014/2013 14:14:36 - INFO - <- This level is successfully initialized
11/014/2013 14:14:37 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
11/014/2013 14:14:37 - INFO - You can drag and drop ftf files here to start flashing them
11/014/2013 14:14:47 - INFO - Device disconnected
11/015/2013 14:15:19 - INFO - Selected X10_V1_BLRelock.ftf
11/015/2013 14:15:19 - INFO - Preparing files for flashing
11/015/2013 14:15:19 - INFO - Please connect your device into flashmode.
11/015/2013 14:15:26 - INFO - Flash canceled
11/015/2013 14:15:34 - INFO - Selected x10_2.3_aro.ftf
11/015/2013 14:15:34 - INFO - Preparing files for flashing
11/015/2013 14:15:51 - INFO - Please connect your device into flashmode.
11/016/2013 14:16:32 - INFO - Device connected in flash mode
11/016/2013 14:16:32 - INFO - Opening device for R/W
11/016/2013 14:16:33 - INFO - Reading device information
11/016/2013 14:16:33 - INFO - Phone ready for flashmode operations.
11/016/2013 14:16:33 - INFO - Current device : X10i - CB511LGRA4 - 1241-1846_R1C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
11/016/2013 14:16:33 - INFO - Start Flashing
11/016/2013 14:16:33 - INFO - Processing loader
11/016/2013 14:16:34 - INFO - Using an unofficial loader
11/016/2013 14:16:34 - INFO - Checking header
11/016/2013 14:16:34 - INFO - Ending flash session
11/016/2013 14:16:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/016/2013 14:16:34 - ERROR - Error flashing. Aborted
11/016/2013 14:16:34 - INFO - Device connected in flash mode
11/016/2013 14:16:36 - INFO - Device disconnected
11/016/2013 14:16:38 - INFO - Device connected in flash mode
complete log, saved when trying to flash stock 2.3.3 firmware
That one should be easy to solve When you choose an ftf file to flash in firmware selection window you have to check "No final verification". That worked for me
P.S. also try to post your threads in the right section
brick
u must try another flash tool the older version
U read a lots, but why didnt u unlock using flashtool plugins? It's easier.
Sent from my Xperia X10 using xda app-developers app

0% Trying to flash Xperia J [SOLVED]

Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
xpiixaaa said:
Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
Click to expand...
Click to collapse
What kind of error in the PC Companion, because I updated my J succesfully through this method.
You must be in MTP mode for flashtoool to work bro
gavster26 said:
You must be in MTP mode for flashtoool to work bro
Click to expand...
Click to collapse
Tried with MTP and MSC mode, the green light stills turning off when start flashing message appears (after i plug on my device with volume down key pressed)
goldenboyz said:
What kind of error in the PC Companion, because I updated my J succesfully through this method.
Click to expand...
Click to collapse
The progress bar stays at about 50% and just as in the flashtool the green light turns off, after a while (the bar is in 50%) the error appears.
The error is error 100, I have searched about it but nothing that is mentioned in the forums that could fix this error has worked.
My xperia is not unbranded (I want to do that)
Tried reinstalling several times SEUS and PC C.
I don´t have another laptop to try.
The green light is suppose too turn off after flashing starts my j dose it every time
gavster26 said:
The green light is suppose too turn off after flashing starts my j dose it every time
Click to expand...
Click to collapse
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
xpiixaaa said:
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
Click to expand...
Click to collapse
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
goldenboyz said:
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Yes ihave. I already unlocked bootloader before. its said "contain modified sector. cannot update your phone"
Yeusry_Neko said:
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Click to expand...
Click to collapse
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
xpiixaaa said:
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
Click to expand...
Click to collapse
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Yeusry_Neko said:
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Click to expand...
Click to collapse
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'll try to root it.I'll use this link -> http://forum.xda-developers.com/showthread.php?t=2033114
and i'll inform you the result...hope successful.
soulfunkdjx said:
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'' try to root it.I'll use this link and i'll inform you how will go...hope successful.
Click to expand...
Click to collapse
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Yeusry_Neko said:
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Click to expand...
Click to collapse
Ok guys i made it. For you my friend you should download the Xperia J Driver from here -> http://forum.xda-developers.com/attachment.php?attachmentid=1546091&d=1354951082
and the firmware 11.0.A.7.5 (search it on the net)
Now follow my steps so flashtool can detect your xperia J.
1)Install Flashtool then extract Xperia J Driver (ST26.rar) and copy the ST26.ftd file to c:\Flashtool\devices\
2)Open Flashtool , i assume that you already installed Sony companion software to your PC, so that Flashtool can detect your phone. Go to devices>import and choose Xperia J, wait import to success
3)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
4)Connect your phone with usb, and if prompt to select your device, select Xperia J
5)Click Flash icon (looks like thunder) and choose flashmode
6)Then browse the folder where you save the Old firmware (.ftf) file (Make sure you put Old and New firmware in different files). Flashtool will automatically scan files inside the firmware.
7)Click OK
AND Now follow my next step to root your phone..
Tool to download:UnlockRoot (May not compatible with Windows 8) - search it on the net as i can't post links.
1)Make sure you have Sony PC companion installed. Extract unlockroot.rar and run unlockroot.exe as administrator
2)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security) then connect your phone
3)Wait until your phone detected, then click Root button. Wait until finish and follow instruction to reboot.
4)Holla! Your phone rooted now!
VERY SIMPLE AND NO FAILURES!!!!:good:
ONE MORE LAST THING!!!
I update my phone after root to the last firmware by OTA and intalled succesfully without losing any of my data and the root. BUT UPDATE ONLY BY OTA (From the phones menu and not by SEUS or PC COMPANION - That means OTA - ''Over The Air'')
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
soulfunkdjx said:
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
Click to expand...
Click to collapse
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Yeusry_Neko said:
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Click to expand...
Click to collapse
I read that you can't have cwm installed when you are on .75 firmware or the latest one.
So you must have .18 or .28 rooted firmwares to have cwm and working great.
So you must downgrade your Xperia j to these 2 firmwares via flashtool if you want fully support of cwm.
Can't even flash
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
nathaneous said:
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
You must add the Xperia j drivers into flashtool.unfortunately flashtool is coming with no Xperia j support and you must do this manually. Is not so difficult.search my post #15 in this thread for howw is working.if you have problems send me a pm.

(Xperia J) Can't flash in flash mode

Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.
tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.
Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked
No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine

[Q] [J] Bricked phone. Please help. Desperate.

I installed FXP CM10 earlier on my phone, then was unable to flash any stock FTFs. Below was the response from the flash tool.
25/009/2013 21:09:02 - INFO - Device connected in flash mode
25/012/2013 21:12:59 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
25/012/2013 21:12:59 - INFO - Preparing files for flashing
25/013/2013 21:13:58 - INFO - Please connect your device into flashmode.
25/013/2013 21:13:59 - INFO - Opening device for R/W
25/013/2013 21:13:59 - INFO - Start Flashing
25/013/2013 21:13:59 - INFO - Processing loader.sin
25/013/2013 21:13:59 - INFO - Checking header
25/013/2013 21:13:59 - INFO - Ending flash session
25/013/2013 21:13:59 - ERROR -
25/013/2013 21:13:59 - ERROR - Error flashing. Aborted
25/013/2013 21:13:59 - INFO - Device connected in flash mode.
Then I thought I could use the stock based roms and installed Dark Moon AVD Rom 4.1.2 using the CWM recovery. The instructions included the flashing of the kernel which again I was not able to do, the flashtool responded the same way. Now I don't know what to do with my phone. Please help. When I charge my phone now and press the power button once I can see the battery logo but when I try to turn on, the orange led blinks once and then nothing happens. Thanks in advance.
mantisy said:
I installed FXP CM10 earlier on my phone, then was unable to flash any stock FTFs. Below was the response from the flash tool.
25/009/2013 21:09:02 - INFO - Device connected in flash mode
25/012/2013 21:12:59 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
25/012/2013 21:12:59 - INFO - Preparing files for flashing
25/013/2013 21:13:58 - INFO - Please connect your device into flashmode.
25/013/2013 21:13:59 - INFO - Opening device for R/W
25/013/2013 21:13:59 - INFO - Start Flashing
25/013/2013 21:13:59 - INFO - Processing loader.sin
25/013/2013 21:13:59 - INFO - Checking header
25/013/2013 21:13:59 - INFO - Ending flash session
25/013/2013 21:13:59 - ERROR -
25/013/2013 21:13:59 - ERROR - Error flashing. Aborted
25/013/2013 21:13:59 - INFO - Device connected in flash mode.
Then I thought I could use the stock based roms and installed Dark Moon AVD Rom 4.1.2 using the CWM recovery. The instructions included the flashing of the kernel which again I was not able to do, the flashtool responded the same way. Now I don't know what to do with my phone. Please help. When I charge my phone now and press the power button once I can see the battery logo but when I try to turn on, the orange led blinks once and then nothing happens. Thanks in advance.
Click to expand...
Click to collapse
Download and install program Sony Update Service (SEUS in ancient times) and use it to repair you phone
[J] Bricked phone trying to install this. Please help.
lozohcum said:
Download and install program Sony Update Service (SEUS in ancient times) and use it to repair you phone
Click to expand...
Click to collapse
'Your phone contains modified software which cannot be updated.'
This is what it said.
mantisy said:
'Your phone contains modified software which cannot be updated.'
This is what it said.
Click to expand...
Click to collapse
Use EMMA
http://developer.sonymobile.com/services/flash-tool/how-to-download-and-install-the-flash-tool/
mantisy said:
'Your phone contains modified software which cannot be updated.'
This is what it said.
Click to expand...
Click to collapse
You have unlockbootloader, relock with flahtool and Sony Update Service (SEUS) should work. i try that on Tipo but it should work on J also.
Ok im gonna try expain you
Pull the battey
and connect to pc without the battery, put again the battey on the phone, and push the button (volume - key) until the process is over
[J] Bricked phone trying to install this. Please help.
realthrash said:
Ok im gonna try expain you
Pull the battey
and connect to pc without the battery, put again the battey on the phone, and push the button (volume - key) until the process is over
Click to expand...
Click to collapse
26/011/2013 12:11:14 - INFO - <- This level is successfully initialized
26/011/2013 12:11:14 - INFO - Flashtool Version 0.9.13.0 built on 2013-06-04 22:50:00
26/011/2013 12:11:18 - INFO - Device connected in flash mode
26/011/2013 12:11:25 - INFO - Selected XJ_ST26i / 11.2.A.0.31 / CE
26/011/2013 12:11:25 - INFO - Preparing files for flashing
26/011/2013 12:11:46 - INFO - Please connect your device into flashmode.
26/011/2013 12:11:47 - INFO - Opening device for R/W
26/011/2013 12:11:47 - INFO - Start Flashing
26/011/2013 12:11:47 - INFO - Processing loader.sin
26/011/2013 12:11:47 - INFO - Checking header
26/011/2013 12:11:47 - INFO - Ending flash session
26/011/2013 12:11:47 - ERROR -
26/011/2013 12:11:47 - ERROR - Error flashing. Aborted
26/011/2013 12:11:47 - INFO - Device connected in flash mode
That is the response.
Try use another flashtool
Sent from my Xperia J using xda premium
mantisy said:
26/011/2013 12:11:47 - INFO - Checking header
26/011/2013 12:11:47 - INFO - Ending flash session
26/011/2013 12:11:47 - ERROR -
26/011/2013 12:11:47 - ERROR - Error flashing. Aborted
26/011/2013 12:11:47 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
Hello.
It looks like some drivers are missing.
Download and install Sony driver package to your computer and then try and report.
Xperia Driver Package
Regards.
Sony Update Service will fix phone even with unlocked bootloader but you need stock rom installed to fix, i forgot

Xperia Miro Freeze when booting

Hi so just yesterday rooted my phone and installed CWM, tried flashing a new rom but I rebooted my phone after deleting the system partition and before installing a new room. Now its stuck on the SONY logo screen, tried using Flashtool to flash the stock rom it gives me this everytime
05/034/2013 16:34:08 - INFO - Device connected in flash mode
05/034/2013 16:34:11 - INFO - Selected ST23i / 11.0.A.2.10 / CentralEurope
05/034/2013 16:34:11 - INFO - Preparing files for flashing
05/034/2013 16:34:41 - INFO - Please connect your device into flashmode.
05/034/2013 16:34:42 - INFO - Opening device for R/W
05/034/2013 16:34:42 - INFO - Start Flashing
05/034/2013 16:34:42 - INFO - Processing loader.sin
05/034/2013 16:34:42 - INFO - Checking header
05/034/2013 16:34:42 - INFO - Ending flash session
05/034/2013 16:34:42 - ERROR -
05/034/2013 16:34:42 - ERROR - Error flashing. Aborted
05/034/2013 16:34:42 - INFO - Device connected in flash mode
Tried using Sony PC Companion it doesnt detects my phone, same with Update Service.
Am I doing something wrong or missing something?
EDIT: Please lock the topic as I found the problem and now sucessfully unbricked it, Windows 8 wasnt letting me do anything

Categories

Resources