Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.
tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.
Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked
No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine
Related
I have tried several times to flash my xperia j to 11.0.a.7.5 firmware using flashtool. But every time i failed. I have added XJ to flashtool using a zip file provided by another xda member kishenpj21. The log file is:
Code:
25/009/2013 08:09:44 - INFO - <- This level is successfully initialized
25/009/2013 08:09:44 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/009/2013 08:09:44 - INFO - You can drag and drop ftf files here to start flashing them
25/009/2013 08:09:50 - INFO - Device connected with USB debugging on
25/009/2013 08:09:50 - INFO - Connected device : ST26
25/009/2013 08:09:50 - INFO - Installed version of busybox : N/A
25/009/2013 08:09:50 - INFO - Android version : 4.0.4 / kernel version : 3.0.8-perf / Build number : 11.0.A.3.18
25/011/2013 08:11:07 - INFO - List of connected devices (Device Id) :
25/011/2013 08:11:07 - INFO - - USB\VID_0FCE&PID_5188\YT9004QZQV Driver installed : true
25/011/2013 08:11:07 - INFO - - USB\VID_0FCE&PID_5188&MI_01\7&3355C5EB&0&0001 Driver installed : true
25/011/2013 08:11:07 - INFO - - USB\VID_0FCE&PID_5188&MI_00\7&3355C5EB&0&0000 Driver installed : true
25/011/2013 08:11:07 - INFO - List of ADB devices :
25/011/2013 08:11:07 - INFO - - YT9004QZQV
25/011/2013 08:11:07 - INFO - List of fastboot devices :
25/011/2013 08:11:07 - INFO - - none
25/011/2013 08:11:23 - INFO - Device disconnected
25/012/2013 08:12:38 - INFO - Device connected in flash mode
25/012/2013 08:12:50 - INFO - Selected ST26i_11.0.A.7.5_CE.ftf
25/012/2013 08:12:50 - INFO - Preparing files for flashing
25/013/2013 08:13:00 - INFO - Please connect your device into flashmode.
25/013/2013 08:13:01 - INFO - Opening device for R/W
25/013/2013 08:13:01 - INFO - Reading device information
25/013/2013 08:13:22 - INFO - Unable to read from phone after having opened it.
25/013/2013 08:13:22 - INFO - trying to continue anyway
25/013/2013 08:13:24 - INFO - Start Flashing
25/013/2013 08:13:24 - INFO - Processing loader
25/013/2013 08:13:24 - INFO - Checking header
25/013/2013 08:13:24 - INFO - Ending flash session
25/013/2013 08:13:24 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
25/013/2013 08:13:24 - ERROR - Error flashing. Aborted
25/013/2013 08:13:25 - INFO - Device disconnected
25/013/2013 08:13:31 - INFO - Log written to C:\Flashtool\flashtool_2013-01-24_08-09-44.log
25/013/2013 08:13:32 - INFO - Device connected with USB debugging off
25/013/2013 08:13:32 - INFO - For 2011 devices line, be sure you are not in MTP mode
plz help me in updating my phone.
It says it right there, be sure you're not in MTP mode.Go to settings>xperia>connectivity>set from MTP to MSC mode and flash.
Steam. said:
It says it right there, be sure you're not in MTP mode.Go to settings>xperia>connectivity>set from MTP to MSC mode and flash.
Click to expand...
Click to collapse
now tried using MSC mode. but no gain. Log is:
Code:
25/009/2013 12:09:38 - INFO - <- This level is successfully initialized
25/009/2013 12:09:38 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/009/2013 12:09:38 - INFO - You can drag and drop ftf files here to start flashing them
25/009/2013 12:09:45 - INFO - Device disconnected
25/009/2013 12:09:53 - INFO - Device connected in flash mode
25/010/2013 12:10:06 - INFO - Selected ST26i_11.0.A.7.5_CE.ftf
25/010/2013 12:10:06 - INFO - Preparing files for flashing
25/010/2013 12:10:39 - INFO - Device disconnected
25/010/2013 12:10:46 - INFO - Device connected with USB debugging off
25/010/2013 12:10:46 - INFO - For 2011 devices line, be sure you are not in MTP mode
25/010/2013 12:10:52 - INFO - Please connect your device into flashmode.
25/010/2013 12:10:54 - INFO - Device disconnected
25/011/2013 12:11:02 - INFO - Flash canceled
25/011/2013 12:11:20 - INFO - Device connected in flash mode
25/011/2013 12:11:30 - INFO - Selected ST26i_11.0.A.7.5_CE.ftf
25/011/2013 12:11:30 - INFO - Preparing files for flashing
25/011/2013 12:11:40 - INFO - Please connect your device into flashmode.
25/011/2013 12:11:40 - INFO - Opening device for R/W
25/011/2013 12:11:41 - INFO - Reading device information
25/012/2013 12:12:03 - INFO - Unable to read from phone after having opened it.
25/012/2013 12:12:03 - INFO - trying to continue anyway
25/012/2013 12:12:06 - INFO - Start Flashing
25/012/2013 12:12:06 - INFO - Processing loader
25/012/2013 12:12:06 - INFO - Checking header
25/012/2013 12:12:06 - INFO - Ending flash session
25/012/2013 12:12:06 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
25/012/2013 12:12:06 - ERROR - Error flashing. Aborted
25/012/2013 12:12:07 - INFO - Device disconnected
25/012/2013 12:12:11 - INFO - Device connected with USB debugging off
25/012/2013 12:12:11 - INFO - For 2011 devices line, be sure you are not in MTP mode
Ur problem. Is that u are connecting. Ur phone before selecting firmware so. Connect it when asked by flash tool......
Sent from my ST26i using xda app-developers app
kushalbhalodia said:
Ur problem. Is that u are connecting. Ur phone before selecting firmware so. Connect it when asked by flash tool......
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
yes, there's a little progress, but still unable to update. log is
Code:
25/009/2013 20:09:23 - INFO - <- This level is successfully initialized
25/009/2013 20:09:23 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/009/2013 20:09:23 - INFO - You can drag and drop ftf files here to start flashing them
25/009/2013 20:09:24 - INFO - Device disconnected
25/011/2013 20:11:08 - INFO - Selected ST26i_11.0.A.7.5_CE.ftf
25/011/2013 20:11:08 - INFO - Preparing files for flashing
25/011/2013 20:11:19 - INFO - Please connect your device into flashmode.
25/011/2013 20:11:34 - INFO - Device connected in flash mode
25/011/2013 20:11:35 - INFO - Opening device for R/W
25/011/2013 20:11:35 - INFO - Reading device information
25/011/2013 20:11:35 - INFO - Phone ready for flashmode operations.
25/011/2013 20:11:35 - INFO - Current device : ST26i - YT9004QZQV - 1266-7839_R3D - 1263-8752_11.0.A.3.18 - WORLD-i_11.0.A.3.18
25/011/2013 20:11:35 - INFO - Start Flashing
25/011/2013 20:11:35 - INFO - Processing loader
25/011/2013 20:11:35 - INFO - Checking header
25/011/2013 20:11:35 - INFO - Flashing data
Flashtool does nothing after showing this "Flashing data" massage for a time being. There was no progress in the progress bar. It remained in 0%.
kushalbhalodia, can u provide me a full and detail tutorial which is specially on flashtool for xperia j so that i can update my phone? I have been unable to update the phone even using the sony pc campanion and sony update service
sthsga said:
yes, there's a little progress, but still unable to update. log is
Code:
25/009/2013 20:09:23 - INFO - <- This level is successfully initialized
25/009/2013 20:09:23 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
25/009/2013 20:09:23 - INFO - You can drag and drop ftf files here to start flashing them
25/009/2013 20:09:24 - INFO - Device disconnected
25/011/2013 20:11:08 - INFO - Selected ST26i_11.0.A.7.5_CE.ftf
25/011/2013 20:11:08 - INFO - Preparing files for flashing
25/011/2013 20:11:19 - INFO - Please connect your device into flashmode.
25/011/2013 20:11:34 - INFO - Device connected in flash mode
25/011/2013 20:11:35 - INFO - Opening device for R/W
25/011/2013 20:11:35 - INFO - Reading device information
25/011/2013 20:11:35 - INFO - Phone ready for flashmode operations.
25/011/2013 20:11:35 - INFO - Current device : ST26i - YT9004QZQV - 1266-7839_R3D - 1263-8752_11.0.A.3.18 - WORLD-i_11.0.A.3.18
25/011/2013 20:11:35 - INFO - Start Flashing
25/011/2013 20:11:35 - INFO - Processing loader
25/011/2013 20:11:35 - INFO - Checking header
25/011/2013 20:11:35 - INFO - Flashing data
Flashtool does nothing after showing this "Flashing data" massage for a time being. There was no progress in the progress bar. It remained in 0%.
kushalbhalodia, can u provide me a full and detail tutorial which is specially on flashtool for xperia j so that i can update my phone? I have been unable to update the phone even using the sony pc campanion and sony update service
Click to expand...
Click to collapse
this xperia neo user http://forum.xda-developers.com/showthread.php?t=1997620 had a similar problem he just used seus to sort it (repair phone feature will be best)
gavster26 said:
this xperia neo user http://forum.xda-developers.com/showthread.php?t=1997620 had a similar problem he just used seus to sort it (repair phone feature will be best)
Click to expand...
Click to collapse
but for me, SPC, SEUS and flashtool are failed update. Either they shows an error or stop functioning as stated in earlier post of this thread. but why..? Then, how will i update my phone?
sthsga said:
but for me, SPC, SEUS and flashtool are failed update. Either they shows an error or stop functioning as stated in earlier post of this thread. but why..? Then, how will i update my phone?
Click to expand...
Click to collapse
have you tried a different ftf. or the extracted update service that hard installs the firmware
gavster26 said:
have you tried a different ftf.
Click to expand...
Click to collapse
nope, but where ill get that one?
or the extracted update service that hard installs the firmware
Click to expand...
Click to collapse
unable to understand it. plz explain.:crying:
I assume you waited patiently as PC Companion/SEUS downloaded the update. So the raw update files are in your PC right now!!
All you've to do to make your own ftf file is to follw the procedure here...
http://forum.xda-developers.com/showthread.php?t=1676565
And once you have your ftf file ready, flash it with the flash tool & let us know if it works :fingers-crossed:
Hi, first of all, i know there are lots of post about bricked phones, trust me, i've seen most of them but none of it helped me and i am kind of fraking out. I got a Sony x10 a few weeks ago and I loved it. I upgraded it to Andoird 2.3.3, rooted it, installed xRecovery, etc. But yesterday I tried to install Android ICS, for that I had to unlock bootloader. Read a lot of post and started, and finally used a method which uses kernel downgrade, a batch program and the kernel upgrade, but guess what, it didn't work, couldn't flash kernel upgrade after all. What freaks me out is that I can't install any ftf either, flashtools keeps showing ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed". Tried using update service, tried with many ftf files and flashtools. Nothing happens. Phone just vibrates a little bit longer than normal when I turn it on and nothing else. It also turn the green led on when connecting to the charger and flash mode seems to work.
I am desperate, I had to do a lot to get a phone like this and now it doesn't even boot with the SE logo. Thanks and I hope someone has the solution.
I forgot to put this:
11/014/2013 14:14:36 - INFO - <- This level is successfully initialized
11/014/2013 14:14:37 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
11/014/2013 14:14:37 - INFO - You can drag and drop ftf files here to start flashing them
11/014/2013 14:14:47 - INFO - Device disconnected
11/015/2013 14:15:19 - INFO - Selected X10_V1_BLRelock.ftf
11/015/2013 14:15:19 - INFO - Preparing files for flashing
11/015/2013 14:15:19 - INFO - Please connect your device into flashmode.
11/015/2013 14:15:26 - INFO - Flash canceled
11/015/2013 14:15:34 - INFO - Selected x10_2.3_aro.ftf
11/015/2013 14:15:34 - INFO - Preparing files for flashing
11/015/2013 14:15:51 - INFO - Please connect your device into flashmode.
11/016/2013 14:16:32 - INFO - Device connected in flash mode
11/016/2013 14:16:32 - INFO - Opening device for R/W
11/016/2013 14:16:33 - INFO - Reading device information
11/016/2013 14:16:33 - INFO - Phone ready for flashmode operations.
11/016/2013 14:16:33 - INFO - Current device : X10i - CB511LGRA4 - 1241-1846_R1C - 1227-4612_2.1.A.0.435 - WORLD-1-4-8_3.0.1.G.0.75
11/016/2013 14:16:33 - INFO - Start Flashing
11/016/2013 14:16:33 - INFO - Processing loader
11/016/2013 14:16:34 - INFO - Using an unofficial loader
11/016/2013 14:16:34 - INFO - Checking header
11/016/2013 14:16:34 - INFO - Ending flash session
11/016/2013 14:16:34 - ERROR - ERR_SEVERITY="MAJOR";ERR_CLASS="SECURITY_CLASS";ERR_DYNAMIC="SIN header verification failed"
11/016/2013 14:16:34 - ERROR - Error flashing. Aborted
11/016/2013 14:16:34 - INFO - Device connected in flash mode
11/016/2013 14:16:36 - INFO - Device disconnected
11/016/2013 14:16:38 - INFO - Device connected in flash mode
complete log, saved when trying to flash stock 2.3.3 firmware
That one should be easy to solve When you choose an ftf file to flash in firmware selection window you have to check "No final verification". That worked for me
P.S. also try to post your threads in the right section
brick
u must try another flash tool the older version
U read a lots, but why didnt u unlock using flashtool plugins? It's easier.
Sent from my Xperia X10 using xda app-developers app
Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
xpiixaaa said:
Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
Click to expand...
Click to collapse
What kind of error in the PC Companion, because I updated my J succesfully through this method.
You must be in MTP mode for flashtoool to work bro
gavster26 said:
You must be in MTP mode for flashtoool to work bro
Click to expand...
Click to collapse
Tried with MTP and MSC mode, the green light stills turning off when start flashing message appears (after i plug on my device with volume down key pressed)
goldenboyz said:
What kind of error in the PC Companion, because I updated my J succesfully through this method.
Click to expand...
Click to collapse
The progress bar stays at about 50% and just as in the flashtool the green light turns off, after a while (the bar is in 50%) the error appears.
The error is error 100, I have searched about it but nothing that is mentioned in the forums that could fix this error has worked.
My xperia is not unbranded (I want to do that)
Tried reinstalling several times SEUS and PC C.
I don´t have another laptop to try.
The green light is suppose too turn off after flashing starts my j dose it every time
gavster26 said:
The green light is suppose too turn off after flashing starts my j dose it every time
Click to expand...
Click to collapse
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
xpiixaaa said:
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
Click to expand...
Click to collapse
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
goldenboyz said:
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Yes ihave. I already unlocked bootloader before. its said "contain modified sector. cannot update your phone"
Yeusry_Neko said:
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Click to expand...
Click to collapse
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
xpiixaaa said:
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
Click to expand...
Click to collapse
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Yeusry_Neko said:
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Click to expand...
Click to collapse
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'll try to root it.I'll use this link -> http://forum.xda-developers.com/showthread.php?t=2033114
and i'll inform you the result...hope successful.
soulfunkdjx said:
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'' try to root it.I'll use this link and i'll inform you how will go...hope successful.
Click to expand...
Click to collapse
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Yeusry_Neko said:
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Click to expand...
Click to collapse
Ok guys i made it. For you my friend you should download the Xperia J Driver from here -> http://forum.xda-developers.com/attachment.php?attachmentid=1546091&d=1354951082
and the firmware 11.0.A.7.5 (search it on the net)
Now follow my steps so flashtool can detect your xperia J.
1)Install Flashtool then extract Xperia J Driver (ST26.rar) and copy the ST26.ftd file to c:\Flashtool\devices\
2)Open Flashtool , i assume that you already installed Sony companion software to your PC, so that Flashtool can detect your phone. Go to devices>import and choose Xperia J, wait import to success
3)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
4)Connect your phone with usb, and if prompt to select your device, select Xperia J
5)Click Flash icon (looks like thunder) and choose flashmode
6)Then browse the folder where you save the Old firmware (.ftf) file (Make sure you put Old and New firmware in different files). Flashtool will automatically scan files inside the firmware.
7)Click OK
AND Now follow my next step to root your phone..
Tool to download:UnlockRoot (May not compatible with Windows 8) - search it on the net as i can't post links.
1)Make sure you have Sony PC companion installed. Extract unlockroot.rar and run unlockroot.exe as administrator
2)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security) then connect your phone
3)Wait until your phone detected, then click Root button. Wait until finish and follow instruction to reboot.
4)Holla! Your phone rooted now!
VERY SIMPLE AND NO FAILURES!!!!:good:
ONE MORE LAST THING!!!
I update my phone after root to the last firmware by OTA and intalled succesfully without losing any of my data and the root. BUT UPDATE ONLY BY OTA (From the phones menu and not by SEUS or PC COMPANION - That means OTA - ''Over The Air'')
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
soulfunkdjx said:
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
Click to expand...
Click to collapse
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Yeusry_Neko said:
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Click to expand...
Click to collapse
I read that you can't have cwm installed when you are on .75 firmware or the latest one.
So you must have .18 or .28 rooted firmwares to have cwm and working great.
So you must downgrade your Xperia j to these 2 firmwares via flashtool if you want fully support of cwm.
Can't even flash
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
nathaneous said:
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
You must add the Xperia j drivers into flashtool.unfortunately flashtool is coming with no Xperia j support and you must do this manually. Is not so difficult.search my post #15 in this thread for howw is working.if you have problems send me a pm.
Couple months back I downloaded an app called LCD Density Modder. It's description was to make everything on your device seem small basically, and so I decided to download it. It told me to turn my mobile off then on for the changes to take effect and so I did :silly:
When I turned it back on, it wouldn't get as far as the sony logo. Can I get some help on how to fix this please? Thanks in advance!
iTike said:
Couple months back I downloaded an app called LCD Density Modder. It's description was to make everything on your device seem small basically, and so I decided to download it. It told me to turn my mobile off then on for the changes to take effect and so I did :silly:
When I turned it back on, it wouldn't get as far as the sony logo. Can I get some help on how to fix this please? Thanks in advance!
Click to expand...
Click to collapse
Bro this isn't called brick... This is just a normal bootloop... Nothing to panic...
Just reset your phone via SUS(Sony update service)
Or flash a ftf file of your device..
Here I'm providing you the link of SUS..
Here Is The Link-
Sony Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Dont Forget To Hit Thanks if your device gets started..btw 'm sure that it will start...
Sent from my C1904 using xda premium
When I open SUS, I choose my device model, It says I need to connect my USB Cable to my PC, hold the volume down key and then plug the USB cable into my Mobile. When I do that nothing actually happens...
Oh and also, when I go on Flashtool it says I need drivers, so when I check for drivers Sony Xperia E doesn't show up, but nearly every other Sony mobile shows.... Why is this?
iTike said:
Oh and also, when I go on Flashtool it says I need drivers, so when I check for drivers Sony Xperia E doesn't show up, but nearly every other Sony mobile shows.... Why is this?
Click to expand...
Click to collapse
Bro when you use flashtool(run it as administrator..).. You dont need to look for your device's drivers. Just install flashmode and fastboot drivers... Dont look for your device..just install flashmode and fastboot drivers.. And then download your phone's ftf file. And flash it..no need to panic bro..
Dont forget to hit thanks..it takes nothing to hit thanks..
Sent from my ST26i using xda premium
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
iTike said:
When I open SUS, I choose my device model, It says I need to connect my USB Cable to my PC, hold the volume down key and then plug the USB cable into my Mobile. When I do that nothing actually happens...
Click to expand...
Click to collapse
Take out the battery for 2-3 mins and put it back.. and then again plug the usb in..and follow on screen instructions..
Sent from my ST26i using xda premium
Hello iTike,
First of all, I have had my Sony Xperia E(c1505) also in a bootloop so I know what you are dealing with! I tried every single possibility there is, and nothing worked, until my friend runned Sony Update Service on his computer and it worked!
So I recommend you using Sony Update Service as been said before. Install it, and run it, click Sony Xperia E and make sure your phone is been shut off! Click install/restore. And press the volume down button and at the same time connect your phone with the USB-cable, while you have it already plugged in in the computer! SUS wil begin downloading. Let it download and install. If the install worked plug out your USB-cable and press the power button. It will restart(it takes a while, but it will restart), and your phone is (hopefully) fixed.
If not, try to flash a stock .ftf file with Flashtool with this tutorial:http://forum.xda-developers.com/showthread.php?t=2240614.
And this file: http://forum.xda-developers.com/showthread.php?t=2409632. It is branded from the UK so there are some apps pre-installed, which you can't delete!
Hope I helped, and otherwise feel free to ask!
And It would be nice if you pressed the thanks button, but I'm not going to beg for it
MatsPunt said:
Hello iTike,
First of all, I have had my Sony Xperia E(c1505) also in a bootloop so I know what you are dealing with! I tried every single possibility there is, and nothing worked, until my friend runned Sony Update Service on his computer and it worked!
So I recommend you using Sony Update Service as been said before. Install it, and run it, click Sony Xperia E and make sure your phone is been shut off! Click install/restore. And press the volume down button and at the same time connect your phone with the USB-cable, while you have it already plugged in in the computer! SUS wil begin downloading. Let it download and install. If the install worked plug out your USB-cable and press the power button. It will restart(it takes a while, but it will restart), and your phone is (hopefully) fixed.
If not, try to flash a stock .ftf file with Flashtool with this tutorial:http://forum.xda-developers.com/showthread.php?t=2240614.
And this file: http://forum.xda-developers.com/showthread.php?t=2409632. It is branded from the UK so there are some apps pre-installed, which you can't delete!
Hope I helped, and otherwise feel free to ask!
And It would be nice if you pressed the thanks button, but I'm not going to beg for it
Click to expand...
Click to collapse
Already Suggested It Bro..
Read Above and then post!
Just download the ftf file of Sony xe......
It will sound like 1505 unbranded ftf.....
Download it and flash it from flashtool
Sent from my C1505 using XDA Premium 4 mobile app
Thanks a lot guys. Getting much closer, just a bit more help. I entered flash mode and now its telling me to:
1: Unplug my device (done)
2: Power off device (done)
3: Press the menu button (done)
4: Plug the USB cable (done)
But when I do all of these, nothing happens. My device menu isn't a button because its touch screen... Can I get more help?
Sent from my STB8098 using xda app-developers app
And Sony update service says my device is already up to date. Then it says exit. That didn't help...
Sent from my STB8098 using xda app-developers app
Hello,
For the Sony Xperia E the flashbutton is the volume down button, so don't press the back or menu button, but the volume-down key!
MatsPunt said:
Hello,
For the Sony Xperia E the flashbutton is the volume down button, so don't press the back or menu button, but the volume-down key!
Click to expand...
Click to collapse
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
22/041/2013 18:41:09 - INFO - Preparing files for flashing
22/041/2013 18:41:10 - INFO - Please connect your device into flashmode.
22/041/2013 18:41:11 - INFO - Opening device for R/W
22/041/2013 18:41:12 - INFO - Reading device information
22/041/2013 18:41:13 - INFO - Unable to read from phone after having opened it.
22/041/2013 18:41:13 - INFO - trying to continue anyway
22/041/2013 18:41:13 - INFO - Start Flashing
22/041/2013 18:41:13 - INFO - Processing loader
22/041/2013 18:41:13 - INFO - Checking header
22/041/2013 18:41:13 - INFO - Ending flash session
22/041/2013 18:41:14 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2013 18:41:14 - ERROR - Error flashing. Aborted
22/041/2013 18:41:14 - INFO - Device disconnected
22/041/2013 18:41:17 - ERROR - Drivers need to be installed for connected device.
22/041/2013 18:41:17 - ERROR - You can find them in the drivers folder of Flashtool.
22/042/2013 18:42:37 - INFO - Selected X10 / V1 / BLRelock
22/042/2013 18:42:37 - INFO - Preparing files for flashing
22/042/2013 18:42:37 - INFO - Please connect your device into flashmode.
22/042/2013 18:42:48 - INFO - Device disconnected
22/043/2013 18:43:02 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:02 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:06 - INFO - Device disconnected
22/043/2013 18:43:22 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:22 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:23 - INFO - Device disconnected
22/043/2013 18:43:30 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:30 - ERROR - You can find them in the drivers folder of Flashtool.
22/047/2013 18:47:51 - INFO - Device disconnected
22/048/2013 18:48:01 - INFO - Device connected in flash mode
22/048/2013 18:48:01 - INFO - Opening device for R/W
22/048/2013 18:48:02 - INFO - Reading device information
22/048/2013 18:48:02 - INFO - Phone ready for flashmode operations.
22/048/2013 18:48:02 - INFO - Current device : Unknown: Jan 31 2013/18:31:23 - - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23
22/048/2013 18:48:02 - INFO - Start Flashing
22/048/2013 18:48:02 - INFO - Processing loader
22/048/2013 18:48:02 - INFO - Checking header
22/048/2013 18:48:02 - INFO - Ending flash session
22/048/2013 18:48:02 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
22/048/2013 18:48:02 - ERROR - Error flashing. Aborted
iTike said:
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
22/041/2013 18:41:09 - INFO - Preparing files for flashing
22/041/2013 18:41:10 - INFO - Please connect your device into flashmode.
22/041/2013 18:41:11 - INFO - Opening device for R/W
22/041/2013 18:41:12 - INFO - Reading device information
22/041/2013 18:41:13 - INFO - Unable to read from phone after having opened it.
22/041/2013 18:41:13 - INFO - trying to continue anyway
22/041/2013 18:41:13 - INFO - Start Flashing
22/041/2013 18:41:13 - INFO - Processing loader
22/041/2013 18:41:13 - INFO - Checking header
22/041/2013 18:41:13 - INFO - Ending flash session
22/041/2013 18:41:14 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2013 18:41:14 - ERROR - Error flashing. Aborted
22/041/2013 18:41:14 - INFO - Device disconnected
22/041/2013 18:41:17 - ERROR - Drivers need to be installed for connected device.
22/041/2013 18:41:17 - ERROR - You can find them in the drivers folder of Flashtool.
22/042/2013 18:42:37 - INFO - Selected X10 / V1 / BLRelock
22/042/2013 18:42:37 - INFO - Preparing files for flashing
22/042/2013 18:42:37 - INFO - Please connect your device into flashmode.
22/042/2013 18:42:48 - INFO - Device disconnected
22/043/2013 18:43:02 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:02 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:06 - INFO - Device disconnected
22/043/2013 18:43:22 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:22 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:23 - INFO - Device disconnected
22/043/2013 18:43:30 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:30 - ERROR - You can find them in the drivers folder of Flashtool.
22/047/2013 18:47:51 - INFO - Device disconnected
22/048/2013 18:48:01 - INFO - Device connected in flash mode
22/048/2013 18:48:01 - INFO - Opening device for R/W
22/048/2013 18:48:02 - INFO - Reading device information
22/048/2013 18:48:02 - INFO - Phone ready for flashmode operations.
22/048/2013 18:48:02 - INFO - Current device : Unknown: Jan 31 2013/18:31:23 - - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23
22/048/2013 18:48:02 - INFO - Start Flashing
22/048/2013 18:48:02 - INFO - Processing loader
22/048/2013 18:48:02 - INFO - Checking header
22/048/2013 18:48:02 - INFO - Ending flash session
22/048/2013 18:48:02 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
22/048/2013 18:48:02 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B8naZAFW2NP3NEJERTZ3aTZJbTg/edit - stock, newest ROM
http://www.xperiablog.net/forum/resources/xperia-e_c1505_11-3-a-2-23_vietnam_generic.145/ - how to flash
This may help
endlesik said:
https://docs.google.com/file/d/0B8naZAFW2NP3NEJERTZ3aTZJbTg/edit - stock, newest ROM
http://www.xperiablog.net/forum/resources/xperia-e_c1505_11-3-a-2-23_vietnam_generic.145/ - how to flash
This may help
Click to expand...
Click to collapse
It still doesn't work... It there like a detailed explanation for this?
iTike said:
And Sony update service says my device is already up to date. Then it says exit. That didn't help...
Sent from my STB8098 using xda app-developers app
Click to expand...
Click to collapse
Bro Sorry for late reply!
but this is the guide you must read before flashing ftf on your xe..--
1)Download Sony flashtool into your computer. Double click on the flashtool.exe file to install. You should see a flashtool folder in C Drive.
2)Double click on flashtool icon in the folder mentioned in Step 1 to launch flashtool (either is FlashTool or FlashTool64.exe)
3)For first timer, navigate to C:\Flashtool\drivers folder to install “Flashtool-drivers”. Select and check the box of your device model and Flashmode Drivers.
4)While your device is powered on, connect your device to computer with USB cable. Make sure all drivers are installed properly before start.
5)Download *.ftf (Be careful to use the correct firmware on different models) and copy to C:\flashtool\firmwares folder in computer.
6)On the flashtool, click on the lightning icon and click flashmode, then “ok”.
7)You should see a new windows.
8)At the right sidebar, check “Data, Cache, Appslog” boxes if you wish to wipe the device before flash. To remain your device data, uncheck all the boxes.
9)At source folder, browse and choose “*.ftf ” in the flashtool/firmwares. *.ftf.
10)Press flash button to start flashing.
11)Follow the prompt instructions.
12)First, to unplug your device from PC.
13)Second, power off your device.
14)Third, enter to Flash Mode on your device by press and hold Volume Down button while connect your device with USB cable to computer.
15)Forth, connect your device back to computer with USB cable. The screen display will still remain blank in dark
16)Monitor the Flashtool in computer. It should continue to run and flash the *.ftf.
17)Wait until the flash process to complete. You should see “Flashing finished” from the flashtool.
18)Power on your device and you shall now with new firmware.
19)Check device firmware to ensure you have properly installed 15.0.A.2.17 firmware – Go to Settings –; About Phone–; Android & Baseband version.
JUST DON'T FORGET TO HIT THAT THANKS BUTTON IF I HELPED AND IF YOUR DEVICE GETS STARTED...
---------- Post added at 04:57 PM ---------- Previous post was at 04:41 PM ----------
iTike said:
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
-
Click to expand...
Click to collapse
Seems like you selected the wrong file...
This-
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock ...
Bro you need to select the ftf of your phone...
Sent From my C1904 using xda premium
Thanks a lot, but i'm stuck on Step 3. There isn't any Sony Xperia E drivers on the list... How do I get the drivers?
Hello iTike.
You don't need any Xperia E drivers installed. Everything you need are the Flashmode and fastboot drivers! Just install, start Flashtool, click the lightning icon, and select your C1505 firmware .ftf. And then click Flash. Someone posted even a tutorial man, just follow it. If you are still confused, questions are always welcome!
Cheers, and good luck!
Every time I install the drivers it says they aren't installed, and I need to get them from the folders of flashtool. I've been doing that but it keeps on saying the same thing.... Why is this?
Try to use a different computer? Perhaps that'll work!
Sent from my C1505 using xda app-developers app
Sony drivers
I had the same problem installing drivers.
1. i installed Sony PC companion and connected the phone.
then go to Device Manager from control panel. you'll see adb device with question mark.
2. Right click it and choose the 'update driver '
3. Select the browse my computer for driver software option
4. And again choose " let me pick blah blah"
5. From there select Sony mobile or something like that that. I kinda forgot but it should be easy.
Also the name will be adb something.
6.install when you find.
can't give a full tutorial right now but it will work.
I'm trying to downgrade my xz from 8.0 to 7.1.1
The flash tool I 'm using is 0.9.24.4 and 0.9.28.0. I had already unlock the bootloader pf my xperia xz, all the drivers had be setup.
When I try to connect my phone to my PC it always shows the following situation :
14/034/2020 14:34:47 - INFO - Starting phone detection
14/034/2020 14:34:50 - INFO - Device connected in flash mode
14/036/2020 14:36:01 - INFO - Selected Bundle for Sony Xperia XZ(F8331). FW release : 39.0.A.3.30_R6B. Customization : Central Europe 1 Generic_1304-9023
14/036/2020 14:36:01 - INFO - Preparing files for flashing
14/036/2020 14:36:11 - INFO - Device disconnected
14/037/2020 14:37:21 - INFO - Please connect your device into flashmode.
14/037/2020 14:37:36 - INFO - Using Gordon gate drivers version 3.1.0.0
14/037/2020 14:37:36 - INFO - Opening device for R/W
14/037/2020 14:37:40 - INFO - Device disconnected
14/037/2020 14:37:41 - INFO - Device connected in flash mode
I had check that there is no problem with my cable. So I had tried the other version. On 0.9.23.0.
Everything is the same, but in 0.9.23.0 it shows the following:
18:26:16 - INFO - Start Flashing
18:26:16 - INFO - No loader in the bundle. Searching for one
18:26:16 - INFO - No matching loader found
18:26:16 - WARN - No loader found or set manually. Skipping loader
I had also tried 0.9.18.6, and I think it's too old and doesn't work for XZ.
Can anyone help me!! PLEASE!!!
redownload system image and reinstall drivers
Are you using win8.1? In that release, the driver always gives errors I switched to Windows 10, and i've improved this error