0% Trying to flash Xperia J [SOLVED] - Sony Xperia Miro, Tipo (Dual), J, E

Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!

xpiixaaa said:
Hi! I have been trying to flash my Xperia J to JB.
04/003/2013 04:03:22 - INFO - <- This level is successfully initialized
04/003/2013 04:03:22 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
04/003/2013 04:03:22 - INFO - You can drag and drop ftf files here to start flashing them
04/003/2013 04:03:27 - INFO - Device disconnected
04/003/2013 04:03:57 - INFO - Selected ST26i_11.2.A.0.21_No brand ITA.ftf
04/003/2013 04:03:57 - INFO - Preparing files for flashing
04/004/2013 04:04:32 - INFO - Please connect your device into flashmode.
04/004/2013 04:04:37 - INFO - Device connected in flash mode
04/004/2013 04:04:38 - INFO - Opening device for R/W
04/004/2013 04:04:38 - INFO - Reading device information
04/004/2013 04:04:38 - INFO - Phone ready for flashmode operations.
04/004/2013 04:04:38 - INFO - Current device : ST26a - YT9005U0T5 - 1267-0305_R9D - 1263-8752_11.0.A.7.10 - WORLD-a_11.0.A.7.10
04/004/2013 04:04:38 - INFO - Start Flashing
04/004/2013 04:04:38 - INFO - Processing loader
04/004/2013 04:04:38 - INFO - Checking header
04/004/2013 04:04:38 - INFO - Flashing data[[And here is at 0%, I have been waiting like for 20 minutes]]
When I plug on my device the green light turns off
I have tried:
- Using SEUS (Error or the progress bar stays at 0%)
- Using Pc Companion (Error)
- Flashtool
What I have done:
- USB debbuging on
- MSC
- Redownloaded a lot of ftf files
- I have the drivers for my Xperia
If you need more information please ask me I really want to flash my device just to unbrand it.
Thank you in advance!
Click to expand...
Click to collapse
What kind of error in the PC Companion, because I updated my J succesfully through this method.

You must be in MTP mode for flashtoool to work bro

gavster26 said:
You must be in MTP mode for flashtoool to work bro
Click to expand...
Click to collapse
Tried with MTP and MSC mode, the green light stills turning off when start flashing message appears (after i plug on my device with volume down key pressed)

goldenboyz said:
What kind of error in the PC Companion, because I updated my J succesfully through this method.
Click to expand...
Click to collapse
The progress bar stays at about 50% and just as in the flashtool the green light turns off, after a while (the bar is in 50%) the error appears.
The error is error 100, I have searched about it but nothing that is mentioned in the forums that could fix this error has worked.
My xperia is not unbranded (I want to do that)
Tried reinstalling several times SEUS and PC C.
I don´t have another laptop to try.

The green light is suppose too turn off after flashing starts my j dose it every time

gavster26 said:
The green light is suppose too turn off after flashing starts my j dose it every time
Click to expand...
Click to collapse
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!

xpiixaaa said:
Didn't know that anyways the point is that I can't flash my device, I have restore to factory setting several times and nothing works :/
I keep trying with SEUS.
EDIT:
Today I tried to flash without the SD card and the SIM, It worked BUT my device is not debranded is like that I'm flashing but not flashing, I mean applications from my cell phone company keep appearing like I was just resetting to factory values.
What's now wrong?
EDIT2:
FINALLY!!!! I debranded my Xperia J!!
The only thing I did was to flash as usual but firstly I removed the sim card, that's what made ​​the difference. Now I have Jelly Bean, thanks anyway for your time I hope someone else could fix any problem with what worked for me
SOLVED!
Click to expand...
Click to collapse
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05

Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app

goldenboyz said:
Have you tried using PC Companion?
Sent from my ST26i using xda app-developers app
Click to expand...
Click to collapse
Yes ihave. I already unlocked bootloader before. its said "contain modified sector. cannot update your phone"

Yeusry_Neko said:
I also had same problem with you but my problem still not solve.Can you help me where to get Xperia J flashmode driver because my flashtool write
- Current device : Unknown: Nov 12 2012/22:55:05 - YT9005AEQV - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
Click to expand...
Click to collapse
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool

xpiixaaa said:
Check out this link!
http://forum.xda-developers.com/showthread.php?t=2033114
The first steps show you how to install the Xperia J drivers for flashtool
Click to expand...
Click to collapse
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?

Yeusry_Neko said:
thanks for the driver. but it still write the same thing.. it is because i'm using windows 8?
Click to expand...
Click to collapse
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'll try to root it.I'll use this link -> http://forum.xda-developers.com/showthread.php?t=2033114
and i'll inform you the result...hope successful.

soulfunkdjx said:
Ok guys i just bought Xperia J. It has the latest firmware (JB 4.1.2 - 11.2.A.0.21) and i'' try to root it.I'll use this link and i'll inform you how will go...hope successful.
Click to expand...
Click to collapse
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:

Yeusry_Neko said:
I hope you root it succesfully.
I just need to know how to make flashtool detect my phone D:
Click to expand...
Click to collapse
Ok guys i made it. For you my friend you should download the Xperia J Driver from here -> http://forum.xda-developers.com/attachment.php?attachmentid=1546091&d=1354951082
and the firmware 11.0.A.7.5 (search it on the net)
Now follow my steps so flashtool can detect your xperia J.
1)Install Flashtool then extract Xperia J Driver (ST26.rar) and copy the ST26.ftd file to c:\Flashtool\devices\
2)Open Flashtool , i assume that you already installed Sony companion software to your PC, so that Flashtool can detect your phone. Go to devices>import and choose Xperia J, wait import to success
3)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security)
4)Connect your phone with usb, and if prompt to select your device, select Xperia J
5)Click Flash icon (looks like thunder) and choose flashmode
6)Then browse the folder where you save the Old firmware (.ftf) file (Make sure you put Old and New firmware in different files). Flashtool will automatically scan files inside the firmware.
7)Click OK
AND Now follow my next step to root your phone..
Tool to download:UnlockRoot (May not compatible with Windows 8) - search it on the net as i can't post links.
1)Make sure you have Sony PC companion installed. Extract unlockroot.rar and run unlockroot.exe as administrator
2)Enable debugging mode on your phone (Setting>developer options) & enable unknown sources (Setting>security) then connect your phone
3)Wait until your phone detected, then click Root button. Wait until finish and follow instruction to reboot.
4)Holla! Your phone rooted now!
VERY SIMPLE AND NO FAILURES!!!!:good:
ONE MORE LAST THING!!!
I update my phone after root to the last firmware by OTA and intalled succesfully without losing any of my data and the root. BUT UPDATE ONLY BY OTA (From the phones menu and not by SEUS or PC COMPANION - That means OTA - ''Over The Air'')

I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm

soulfunkdjx said:
I can't install properly the cwm. It's full of bugs and when i am booting in cwm the first time i have resolution screen problems. And after i press ''reboot system now'' my phone is not responding. So i had to install again the rom via flashtool.All these are hapening in ST26i_11.0.A.7.5_CE rom. Anyone has the same problem? I need the cwm
Click to expand...
Click to collapse
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.

Yeusry_Neko said:
this is the problem i faced.. I google, it say that its called "soft bricked".
I want to flash because i want to repair it.
Click to expand...
Click to collapse
I read that you can't have cwm installed when you are on .75 firmware or the latest one.
So you must have .18 or .28 rooted firmwares to have cwm and working great.
So you must downgrade your Xperia j to these 2 firmwares via flashtool if you want fully support of cwm.

Can't even flash
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode

nathaneous said:
Can someone please explain to me what i'm doing wrong?
I'm a noob and just trying to flash xperia j at the moment...
24/048/2013 23:48:04 - INFO - <- This level is successfully initialized
24/048/2013 23:48:04 - INFO - Flashtool
24/048/2013 23:48:09 - INFO - Device disconnected
24/048/2013 23:48:29 - INFO - Please connect your device into flashmode.
24/048/2013 23:48:36 - INFO - Device connected in flash mode
24/048/2013 23:48:38 - INFO - Opening device for R/W
24/048/2013 23:48:38 - INFO - Start Flashing
24/048/2013 23:48:38 - INFO - Processing loader
24/048/2013 23:48:38 - INFO - Checking header
24/048/2013 23:48:38 - INFO - Ending flash session
24/048/2013 23:48:38 - ERROR -
24/048/2013 23:48:38 - ERROR - Error flashing. Aborted
24/048/2013 23:48:38 - INFO - Device connected in flash mode
Click to expand...
Click to collapse
You must add the Xperia j drivers into flashtool.unfortunately flashtool is coming with no Xperia j support and you must do this manually. Is not so difficult.search my post #15 in this thread for howw is working.if you have problems send me a pm.

Related

(Xperia J) Can't flash in flash mode

Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
NoGynGz said:
Hello, first of all sorry for my english.
Yesterday I flashed my Xperia J with FXP223, everything was ok except that I have no network, and my IMEI was gone.
I've found that I have to flash my phone with an ICS stock rom and reflash with FXP223.
But i can't flash my phone in flash mode.
I followed all instructions, Flashtool -> flash mode -> select .ftf rom -> plug my phone in flash mode when asked, green led is OK -> and then the flash freeze at "Flashing data" and at the same time my green led shutdown.
Code:
16/012/2013 09:12:36 - INFO - <- This level is successfully initialized
16/012/2013 09:12:36 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
16/012/2013 09:12:40 - INFO - Device disconnected
16/012/2013 09:12:42 - INFO - Selected ST26i / 11.0.A.7.5 / CE
16/012/2013 09:12:42 - INFO - Preparing files for flashing
16/012/2013 09:12:51 - INFO - Please connect your device into flashmode.
16/013/2013 09:13:02 - INFO - Device connected in flash mode
16/013/2013 09:13:05 - INFO - Opening device for R/W
16/013/2013 09:13:05 - INFO - Reading device information
16/013/2013 09:13:06 - INFO - Phone ready for flashmode operations.
16/013/2013 09:13:06 - INFO - Current device : Unknown: Nov 12 2012/22:55:05 - YT9002JQBJ - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05 - Unknown: Nov 12 2012/22:55:05
16/013/2013 09:13:06 - INFO - Start Flashing
16/013/2013 09:13:06 - INFO - Processing loader
16/013/2013 09:13:06 - INFO - Checking header
16/013/2013 09:13:06 - INFO - Flashing data
I have tested with multiple .ftf rom, 2 versions of Flashtool, on 3 PC, usb debugging is checked, and all the time it freeze at "Flashing data" and my green led shutdown.
I hope that someone can help me, I can't use my phone :'(
Thank you in advance.
Edit: Fastboot mode works fine, only flashmode doesn't works.
Click to expand...
Click to collapse
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
gamer649 said:
Did you install the drivers from the flashtool folder? If not that may very well be your problem.
Click to expand...
Click to collapse
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
NoGynGz said:
Flashtool-drivers.exe doesn't have drivers for Xperia J, I've tested to manually import J drivers with that method : http://forum.xda-developers.com/showpost.php?p=41592930&postcount=15 but doesn't work too.
Sony companion recognize my phone (when I test to recover my phone it says that my phone has been modified, but it recognize the phone)
I don't know what to do
Click to expand...
Click to collapse
Did you install the fastboot and flashmode drives from the setup as you may need them too. I think it would be worth it to install all of the drivers from the driver setup folder. If you try that and then that method after I think it should work.
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Click to expand...
Click to collapse
It is good to hear you got it working. I've just noticed you previously said you tried to repair your phone in PC companion. That would have stopped it working too. I'm sorry I didn't pick that up sooner.
tried all of that but no luck when i press on the thunder icon it says wait for flash
NoGynGz said:
OMFG
After hours and hours of research and test, it finally works !!! (on the 4th PC )
Certainly drivers conflict or something like that.
If someone have the same problem :
Install only Flashtool v0.9.10.1
Install flashmode drivers with Flashtool-drivers.exe
Launch it.
Import ST26 drivers in flashtool (search ST26.zip on google)
Connect the Xperia J in flashmode to automatically install the windows drivers.
When complete disconnect the Xperia J.
In Flashtool -> flashmode -> select a stock .ftf rom -> flash -> connect the xperia in flashmode when asked. Yeah it flash.
I insist that on this PC, I have never installed SEUS, PC companion or others software or drivers.
(For those who want, I flashed with an ICS stock rom then FXP218, now all works)
Thank you gamer649 for trying to help me
Click to expand...
Click to collapse
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Boro2 said:
tried all of that but no luck when i press on the thunder icon it says wait for flashmode but nothing happens
Click to expand...
Click to collapse
try another boot.img first in fastboot mode and then try.
Thanks
tuspam said:
try another boot.img first in fastboot mode and then try.
Click to expand...
Click to collapse
Thanks bro it worked
No Luck
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
please help
I also had the same problem but then i managed to flash a stock ics .ftf and now the device is not responding...! NO ligths even after charging my phone is still connected to charger...! someone please help please ...!
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
Remove SIM Card, MMC & then flash! Also, note that sometimes flashing doesn't work after you resume from Standby/Hibernate mode in PC.
anaseansari said:
I have tried every thing in this thread but nothing works for me.
Plz Help I am on stock firmware .33.
Does not goes any further from this.
Please Help.
04/010/2014 12:10:38 - INFO - Selected ST26i / 11.2.A.0.21 / No brand ITA
04/010/2014 12:10:39 - INFO - Preparing files for flashing
04/011/2014 12:11:36 - INFO - Please connect your device into flashmode.
04/011/2014 12:11:44 - INFO - Device connected in flash mode
04/011/2014 12:11:45 - INFO - Opening device for R/W
04/011/2014 12:11:45 - INFO - Reading device information
04/011/2014 12:11:45 - INFO - Phone ready for flashmode operations.
04/011/2014 12:11:45 - INFO - Current device : ST26i - YT9102JUSP - 1271-1970_R5E - 1263-8752_11.2.A.0.33 - WORLD-i_11.2.A.0.33
04/011/2014 12:11:45 - INFO - Start Flashing
04/011/2014 12:11:45 - INFO - Processing loader.sin
04/011/2014 12:11:45 - INFO - Checking header
04/011/2014 12:11:46 - INFO - Flashing data
ALL DONE BY REMOVING MMC AND FLASHING
Click to expand...
Click to collapse
restore your backup files then flash again ,it's work fine

[Q] Hard Brick Tipo

The case:
I was trying to install a new Rom, when accidently after the last step,i.e,mounts and storage>>format system, I restarted the mobile by habit. Then it got stuck at sony logo. So i opened my flashtool and flashed the stock ftf .22 version. All went well and i had my stock rom installed. Then i installed cwm and rooted the phone. After that i wanted to install the .27 paradox rom. I formatted the whole phone again.But after that,i realised that i forgot to insert my memory card where it was stored. So i went back to flashtool to flash the stock .22 ftf again. Now,the phone got stuck in the same process and this is My log:
21/005/2013 01:05:31 - INFO - <- This level is successfully initialized
21/005/2013 01:05:31 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/005/2013 01:05:31 - INFO - You can drag and drop ftf files here to start flashing them
21/005/2013 01:05:36 - INFO - Device disconnected
21/005/2013 01:05:37 - INFO - Selected st21i_11.0.A.4.22_Generic.ftf
21/005/2013 01:05:37 - INFO - Preparing files for flashing
21/005/2013 01:05:43 - INFO - Please connect your device into flashmode.
21/006/2013 01:06:33 - INFO - Device connected in flash mode
21/006/2013 01:06:33 - INFO - Opening device for R/W
21/006/2013 01:06:33 - INFO - Reading device information
21/006/2013 01:06:33 - INFO - Phone ready for flashmode operations.
21/006/2013 01:06:34 - INFO - Current device : ST21i - YT9002PHA6 - 1264-4250_R4D - 1261-1516_11.0.A.4.22 - WORLD-i_11.0.A.4.22
21/006/2013 01:06:34 - INFO - Start Flashing
21/006/2013 01:06:34 - INFO - Processing loader
21/006/2013 01:06:34 - INFO - Checking header
21/006/2013 01:06:34 - INFO - Flashing data
and then it stucks at 0% for ever. Interestingly after the last line, i.e Flashing data, the green LED goes off of the phone. I kept the mobile on for the whole night and the battery fully drained this morning. I put the mobile on charging, then it shows green LED and nothing(no vibration). I do have an unlocked bootloader and so i cant repair it through sony update service.
note: whenever i tried to charge it through the wall charger previously,it displayed the green LED. What to do now??? is my phone dead???? plzz help
Try to install flashtool again.
If doesnt work, try another pc.
Next time, put the rom in internal storage
Sent from my Xperia Miro using xda premium
tukulahon said:
The case:
I was trying to install a new Rom, when accidently after the last step,i.e,mounts and storage>>format system, I restarted the mobile by habit. Then it got stuck at sony logo. So i opened my flashtool and flashed the stock ftf .22 version. All went well and i had my stock rom installed. Then i installed cwm and rooted the phone. After that i wanted to install the .27 paradox rom. I formatted the whole phone again.But after that,i realised that i forgot to insert my memory card where it was stored. So i went back to flashtool to flash the stock .22 ftf again. Now,the phone got stuck in the same process and this is My log:
21/005/2013 01:05:31 - INFO - <- This level is successfully initialized
21/005/2013 01:05:31 - INFO - Flashtool Version 0.9.10.1 built on 2013-01-09 19:49:47
21/005/2013 01:05:31 - INFO - You can drag and drop ftf files here to start flashing them
21/005/2013 01:05:36 - INFO - Device disconnected
21/005/2013 01:05:37 - INFO - Selected st21i_11.0.A.4.22_Generic.ftf
21/005/2013 01:05:37 - INFO - Preparing files for flashing
21/005/2013 01:05:43 - INFO - Please connect your device into flashmode.
21/006/2013 01:06:33 - INFO - Device connected in flash mode
21/006/2013 01:06:33 - INFO - Opening device for R/W
21/006/2013 01:06:33 - INFO - Reading device information
21/006/2013 01:06:33 - INFO - Phone ready for flashmode operations.
21/006/2013 01:06:34 - INFO - Current device : ST21i - YT9002PHA6 - 1264-4250_R4D - 1261-1516_11.0.A.4.22 - WORLD-i_11.0.A.4.22
21/006/2013 01:06:34 - INFO - Start Flashing
21/006/2013 01:06:34 - INFO - Processing loader
21/006/2013 01:06:34 - INFO - Checking header
21/006/2013 01:06:34 - INFO - Flashing data
and then it stucks at 0% for ever. Interestingly after the last line, i.e Flashing data, the green LED goes off of the phone. I kept the mobile on for the whole night and the battery fully drained this morning. I put the mobile on charging, then it shows green LED and nothing(no vibration). I do have an unlocked bootloader and so i cant repair it through sony update service.
note: whenever i tried to charge it through the wall charger previously,it displayed the green LED. What to do now??? is my phone dead???? plzz help
Click to expand...
Click to collapse
When you unlocked the bootloaer, did you save the DRM keys with this tool: Backup TA for Sony Xperia
I did a mistake installing a kernel from Sola in my Tipo (my wife has a Sola and I had some kernels in the same folder...) and could save it replacing the saved keys and relocking the bootloader.
Have you tried to flash kernel one more time, and then flash the stock rom? Flash stock kernel, and give us the log

[Q] Please help Sony Xperia E C1505 Bricked!

Couple months back I downloaded an app called LCD Density Modder. It's description was to make everything on your device seem small basically, and so I decided to download it. It told me to turn my mobile off then on for the changes to take effect and so I did :silly:
When I turned it back on, it wouldn't get as far as the sony logo. Can I get some help on how to fix this please? Thanks in advance!
iTike said:
Couple months back I downloaded an app called LCD Density Modder. It's description was to make everything on your device seem small basically, and so I decided to download it. It told me to turn my mobile off then on for the changes to take effect and so I did :silly:
When I turned it back on, it wouldn't get as far as the sony logo. Can I get some help on how to fix this please? Thanks in advance!
Click to expand...
Click to collapse
Bro this isn't called brick... This is just a normal bootloop... Nothing to panic...
Just reset your phone via SUS(Sony update service)
Or flash a ftf file of your device..
Here I'm providing you the link of SUS..
Here Is The Link-
Sony Update Service (SUS)
http://www.sonymobile.com/gb/tools/update-service/
http://www-support-downloads.sonymob...-2.11.12.5.exe
Dont Forget To Hit Thanks if your device gets started..btw 'm sure that it will start...
Sent from my C1904 using xda premium
When I open SUS, I choose my device model, It says I need to connect my USB Cable to my PC, hold the volume down key and then plug the USB cable into my Mobile. When I do that nothing actually happens...
Oh and also, when I go on Flashtool it says I need drivers, so when I check for drivers Sony Xperia E doesn't show up, but nearly every other Sony mobile shows.... Why is this?
iTike said:
Oh and also, when I go on Flashtool it says I need drivers, so when I check for drivers Sony Xperia E doesn't show up, but nearly every other Sony mobile shows.... Why is this?
Click to expand...
Click to collapse
Bro when you use flashtool(run it as administrator..).. You dont need to look for your device's drivers. Just install flashmode and fastboot drivers... Dont look for your device..just install flashmode and fastboot drivers.. And then download your phone's ftf file. And flash it..no need to panic bro..
Dont forget to hit thanks..it takes nothing to hit thanks..
Sent from my ST26i using xda premium
---------- Post added at 12:46 PM ---------- Previous post was at 12:44 PM ----------
iTike said:
When I open SUS, I choose my device model, It says I need to connect my USB Cable to my PC, hold the volume down key and then plug the USB cable into my Mobile. When I do that nothing actually happens...
Click to expand...
Click to collapse
Take out the battery for 2-3 mins and put it back.. and then again plug the usb in..and follow on screen instructions..
Sent from my ST26i using xda premium
Hello iTike,
First of all, I have had my Sony Xperia E(c1505) also in a bootloop so I know what you are dealing with! I tried every single possibility there is, and nothing worked, until my friend runned Sony Update Service on his computer and it worked!
So I recommend you using Sony Update Service as been said before. Install it, and run it, click Sony Xperia E and make sure your phone is been shut off! Click install/restore. And press the volume down button and at the same time connect your phone with the USB-cable, while you have it already plugged in in the computer! SUS wil begin downloading. Let it download and install. If the install worked plug out your USB-cable and press the power button. It will restart(it takes a while, but it will restart), and your phone is (hopefully) fixed.
If not, try to flash a stock .ftf file with Flashtool with this tutorial:http://forum.xda-developers.com/showthread.php?t=2240614.
And this file: http://forum.xda-developers.com/showthread.php?t=2409632. It is branded from the UK so there are some apps pre-installed, which you can't delete!
Hope I helped, and otherwise feel free to ask!
And It would be nice if you pressed the thanks button, but I'm not going to beg for it
MatsPunt said:
Hello iTike,
First of all, I have had my Sony Xperia E(c1505) also in a bootloop so I know what you are dealing with! I tried every single possibility there is, and nothing worked, until my friend runned Sony Update Service on his computer and it worked!
So I recommend you using Sony Update Service as been said before. Install it, and run it, click Sony Xperia E and make sure your phone is been shut off! Click install/restore. And press the volume down button and at the same time connect your phone with the USB-cable, while you have it already plugged in in the computer! SUS wil begin downloading. Let it download and install. If the install worked plug out your USB-cable and press the power button. It will restart(it takes a while, but it will restart), and your phone is (hopefully) fixed.
If not, try to flash a stock .ftf file with Flashtool with this tutorial:http://forum.xda-developers.com/showthread.php?t=2240614.
And this file: http://forum.xda-developers.com/showthread.php?t=2409632. It is branded from the UK so there are some apps pre-installed, which you can't delete!
Hope I helped, and otherwise feel free to ask!
And It would be nice if you pressed the thanks button, but I'm not going to beg for it
Click to expand...
Click to collapse
Already Suggested It Bro..
Read Above and then post!
Just download the ftf file of Sony xe......
It will sound like 1505 unbranded ftf.....
Download it and flash it from flashtool
Sent from my C1505 using XDA Premium 4 mobile app
Thanks a lot guys. Getting much closer, just a bit more help. I entered flash mode and now its telling me to:
1: Unplug my device (done)
2: Power off device (done)
3: Press the menu button (done)
4: Plug the USB cable (done)
But when I do all of these, nothing happens. My device menu isn't a button because its touch screen... Can I get more help?
Sent from my STB8098 using xda app-developers app
And Sony update service says my device is already up to date. Then it says exit. That didn't help...
Sent from my STB8098 using xda app-developers app
Hello,
For the Sony Xperia E the flashbutton is the volume down button, so don't press the back or menu button, but the volume-down key!
MatsPunt said:
Hello,
For the Sony Xperia E the flashbutton is the volume down button, so don't press the back or menu button, but the volume-down key!
Click to expand...
Click to collapse
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
22/041/2013 18:41:09 - INFO - Preparing files for flashing
22/041/2013 18:41:10 - INFO - Please connect your device into flashmode.
22/041/2013 18:41:11 - INFO - Opening device for R/W
22/041/2013 18:41:12 - INFO - Reading device information
22/041/2013 18:41:13 - INFO - Unable to read from phone after having opened it.
22/041/2013 18:41:13 - INFO - trying to continue anyway
22/041/2013 18:41:13 - INFO - Start Flashing
22/041/2013 18:41:13 - INFO - Processing loader
22/041/2013 18:41:13 - INFO - Checking header
22/041/2013 18:41:13 - INFO - Ending flash session
22/041/2013 18:41:14 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2013 18:41:14 - ERROR - Error flashing. Aborted
22/041/2013 18:41:14 - INFO - Device disconnected
22/041/2013 18:41:17 - ERROR - Drivers need to be installed for connected device.
22/041/2013 18:41:17 - ERROR - You can find them in the drivers folder of Flashtool.
22/042/2013 18:42:37 - INFO - Selected X10 / V1 / BLRelock
22/042/2013 18:42:37 - INFO - Preparing files for flashing
22/042/2013 18:42:37 - INFO - Please connect your device into flashmode.
22/042/2013 18:42:48 - INFO - Device disconnected
22/043/2013 18:43:02 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:02 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:06 - INFO - Device disconnected
22/043/2013 18:43:22 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:22 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:23 - INFO - Device disconnected
22/043/2013 18:43:30 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:30 - ERROR - You can find them in the drivers folder of Flashtool.
22/047/2013 18:47:51 - INFO - Device disconnected
22/048/2013 18:48:01 - INFO - Device connected in flash mode
22/048/2013 18:48:01 - INFO - Opening device for R/W
22/048/2013 18:48:02 - INFO - Reading device information
22/048/2013 18:48:02 - INFO - Phone ready for flashmode operations.
22/048/2013 18:48:02 - INFO - Current device : Unknown: Jan 31 2013/18:31:23 - - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23
22/048/2013 18:48:02 - INFO - Start Flashing
22/048/2013 18:48:02 - INFO - Processing loader
22/048/2013 18:48:02 - INFO - Checking header
22/048/2013 18:48:02 - INFO - Ending flash session
22/048/2013 18:48:02 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
22/048/2013 18:48:02 - ERROR - Error flashing. Aborted
iTike said:
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
22/041/2013 18:41:09 - INFO - Preparing files for flashing
22/041/2013 18:41:10 - INFO - Please connect your device into flashmode.
22/041/2013 18:41:11 - INFO - Opening device for R/W
22/041/2013 18:41:12 - INFO - Reading device information
22/041/2013 18:41:13 - INFO - Unable to read from phone after having opened it.
22/041/2013 18:41:13 - INFO - trying to continue anyway
22/041/2013 18:41:13 - INFO - Start Flashing
22/041/2013 18:41:13 - INFO - Processing loader
22/041/2013 18:41:13 - INFO - Checking header
22/041/2013 18:41:13 - INFO - Ending flash session
22/041/2013 18:41:14 - ERROR - Error in processHeader : 22 : The device does not recognize the command.
22/041/2013 18:41:14 - ERROR - Error flashing. Aborted
22/041/2013 18:41:14 - INFO - Device disconnected
22/041/2013 18:41:17 - ERROR - Drivers need to be installed for connected device.
22/041/2013 18:41:17 - ERROR - You can find them in the drivers folder of Flashtool.
22/042/2013 18:42:37 - INFO - Selected X10 / V1 / BLRelock
22/042/2013 18:42:37 - INFO - Preparing files for flashing
22/042/2013 18:42:37 - INFO - Please connect your device into flashmode.
22/042/2013 18:42:48 - INFO - Device disconnected
22/043/2013 18:43:02 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:02 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:06 - INFO - Device disconnected
22/043/2013 18:43:22 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:22 - ERROR - You can find them in the drivers folder of Flashtool.
22/043/2013 18:43:23 - INFO - Device disconnected
22/043/2013 18:43:30 - ERROR - Drivers need to be installed for connected device.
22/043/2013 18:43:30 - ERROR - You can find them in the drivers folder of Flashtool.
22/047/2013 18:47:51 - INFO - Device disconnected
22/048/2013 18:48:01 - INFO - Device connected in flash mode
22/048/2013 18:48:01 - INFO - Opening device for R/W
22/048/2013 18:48:02 - INFO - Reading device information
22/048/2013 18:48:02 - INFO - Phone ready for flashmode operations.
22/048/2013 18:48:02 - INFO - Current device : Unknown: Jan 31 2013/18:31:23 - - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23 - Unknown: Jan 31 2013/18:31:23
22/048/2013 18:48:02 - INFO - Start Flashing
22/048/2013 18:48:02 - INFO - Processing loader
22/048/2013 18:48:02 - INFO - Checking header
22/048/2013 18:48:02 - INFO - Ending flash session
22/048/2013 18:48:02 - ERROR - ERR_SEVERITY="MAJOR";ERR_CODE="0019";ERR_DYNAMIC="SIN header verification failed";
22/048/2013 18:48:02 - ERROR - Error flashing. Aborted
Click to expand...
Click to collapse
https://docs.google.com/file/d/0B8naZAFW2NP3NEJERTZ3aTZJbTg/edit - stock, newest ROM
http://www.xperiablog.net/forum/resources/xperia-e_c1505_11-3-a-2-23_vietnam_generic.145/ - how to flash
This may help
endlesik said:
https://docs.google.com/file/d/0B8naZAFW2NP3NEJERTZ3aTZJbTg/edit - stock, newest ROM
http://www.xperiablog.net/forum/resources/xperia-e_c1505_11-3-a-2-23_vietnam_generic.145/ - how to flash
This may help
Click to expand...
Click to collapse
It still doesn't work... It there like a detailed explanation for this?
iTike said:
And Sony update service says my device is already up to date. Then it says exit. That didn't help...
Sent from my STB8098 using xda app-developers app
Click to expand...
Click to collapse
Bro Sorry for late reply!
but this is the guide you must read before flashing ftf on your xe..--
1)Download Sony flashtool into your computer. Double click on the flashtool.exe file to install. You should see a flashtool folder in C Drive.
2)Double click on flashtool icon in the folder mentioned in Step 1 to launch flashtool (either is FlashTool or FlashTool64.exe)
3)For first timer, navigate to C:\Flashtool\drivers folder to install “Flashtool-drivers”. Select and check the box of your device model and Flashmode Drivers.
4)While your device is powered on, connect your device to computer with USB cable. Make sure all drivers are installed properly before start.
5)Download *.ftf (Be careful to use the correct firmware on different models) and copy to C:\flashtool\firmwares folder in computer.
6)On the flashtool, click on the lightning icon and click flashmode, then “ok”.
7)You should see a new windows.
8)At the right sidebar, check “Data, Cache, Appslog” boxes if you wish to wipe the device before flash. To remain your device data, uncheck all the boxes.
9)At source folder, browse and choose “*.ftf ” in the flashtool/firmwares. *.ftf.
10)Press flash button to start flashing.
11)Follow the prompt instructions.
12)First, to unplug your device from PC.
13)Second, power off your device.
14)Third, enter to Flash Mode on your device by press and hold Volume Down button while connect your device with USB cable to computer.
15)Forth, connect your device back to computer with USB cable. The screen display will still remain blank in dark
16)Monitor the Flashtool in computer. It should continue to run and flash the *.ftf.
17)Wait until the flash process to complete. You should see “Flashing finished” from the flashtool.
18)Power on your device and you shall now with new firmware.
19)Check device firmware to ensure you have properly installed 15.0.A.2.17 firmware – Go to Settings –; About Phone–; Android & Baseband version.
JUST DON'T FORGET TO HIT THAT THANKS BUTTON IF I HELPED AND IF YOUR DEVICE GETS STARTED...
---------- Post added at 04:57 PM ---------- Previous post was at 04:41 PM ----------
iTike said:
22/039/2013 18:39:56 - INFO - <- This level is successfully initialized
22/039/2013 18:39:56 - INFO - Flashtool Version 0.9.11.0 built on 2013-06-04 22:50:00
22/040/2013 18:40:02 - INFO - Device disconnected
22/040/2013 18:40:13 - ERROR - Drivers need to be installed for connected device.
22/040/2013 18:40:13 - ERROR - You can find them in the drivers folder of Flashtool.
22/040/2013 18:40:21 - INFO - Device disconnected
22/040/2013 18:40:27 - INFO - Device connected in flash mode
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock
-
Click to expand...
Click to collapse
Seems like you selected the wrong file...
This-
22/041/2013 18:41:08 - INFO - Selected X10 / V1 / BLRelock ...
Bro you need to select the ftf of your phone...
Sent From my C1904 using xda premium
Thanks a lot, but i'm stuck on Step 3. There isn't any Sony Xperia E drivers on the list... How do I get the drivers?
Hello iTike.
You don't need any Xperia E drivers installed. Everything you need are the Flashmode and fastboot drivers! Just install, start Flashtool, click the lightning icon, and select your C1505 firmware .ftf. And then click Flash. Someone posted even a tutorial man, just follow it. If you are still confused, questions are always welcome!
Cheers, and good luck!
Every time I install the drivers it says they aren't installed, and I need to get them from the folders of flashtool. I've been doing that but it keeps on saying the same thing.... Why is this?
Try to use a different computer? Perhaps that'll work!
Sent from my C1505 using xda app-developers app
Sony drivers
I had the same problem installing drivers.
1. i installed Sony PC companion and connected the phone.
then go to Device Manager from control panel. you'll see adb device with question mark.
2. Right click it and choose the 'update driver '
3. Select the browse my computer for driver software option
4. And again choose " let me pick blah blah"
5. From there select Sony mobile or something like that that. I kinda forgot but it should be easy.
Also the name will be adb something.
6.install when you find.
can't give a full tutorial right now but it will work.

Xperia J Flash problem

First of all, if there's other threads that described my issue, forgive me because I probably didn't use the proper term.
Anyway, I'm trying to get http://forum.xda-developers.com/xpe...y-bean-11-2-0-31-11-2-0-21-t2333078?nocache=1 to work, but my phone simply refuse to stay flashing. It detects the phone, execute the flash, and then nothing.
Code:
13/049/2014 03:49:58 - INFO - Connected device : Sony Xperia J
13/049/2014 03:49:58 - INFO - Installed version of busybox : BusyBox v1.20.2-Stericson (2012-07-04 21:33:31 CDT) multi-call binary.
13/049/2014 03:49:59 - INFO - Android version : 4.1.2 / kernel version : 3.4.0 / Build number : 11.2.A.0.31
13/049/2014 03:49:59 - INFO - Checking root access
13/050/2014 03:50:00 - INFO - Root Access Allowed
13/050/2014 03:50:09 - INFO - Selected Bundle for ST26i. FW release : null. Customization : Aby uzywac CWM sflasuj to
13/050/2014 03:50:09 - INFO - Preparing files for flashing
13/050/2014 03:50:09 - INFO - Please connect your device into flashmode.
13/050/2014 03:50:13 - INFO - Device disconnected
13/050/2014 03:50:46 - INFO - Device connected in flash mode
13/050/2014 03:50:47 - INFO - Opening device for R/W
13/050/2014 03:50:47 - INFO - Reading device information
13/050/2014 03:50:47 - INFO - Phone ready for flashmode operations.
13/050/2014 03:50:47 - INFO - Current device : ST26i - YT910E9CU2 - 1266-7873_R2E - 1263-8752_11.2.A.0.31 - WORLD-i_11.2.A.0.31
13/050/2014 03:50:47 - INFO - Start Flashing
13/050/2014 03:50:47 - INFO - Processing loader.sin
13/050/2014 03:50:47 - INFO - Checking header
13/050/2014 03:50:47 - INFO - Flashing data
13/050/2014 03:50:47 - INFO - Processing of loader.sin finished.
No error, no nothing. It just stops there. The green light on the phone lights up when I first connect it in flash mode, but it goes off when it flashtool starts flashing, thus ending everything there. Anybody know what's wrong and how to fix it? I've tried factory reset, changing usb ports and other menial troubleshooting, but at 4:43 A.M. I'm not sure how much more of troubleshooting I can do.
*Update*
If I were to unplug after the led died off, and plug it again (without pressing any buttons down), it automatically connected into flash mode instead of recharging.
First, is your bootloader locked? I ask this so i can sure your bootloader is locked.
Second, if you flash anything using flashtool, always in the same result? :fingers-crossed:
I had a similar problem.
All I had to do was to remove the micro SD card while flashing.
Once you're done with flashing you can insert it again.
Vroyaloko said:
First, is your bootloader locked? I ask this so i can sure your bootloader is locked.
Second, if you flash anything using flashtool, always in the same result? :fingers-crossed:
Click to expand...
Click to collapse
Yeah Bootloader is locked, and trying to flash anything will end with the same result. :c
Pthn said:
I had a similar problem.
All I had to do was to remove the micro SD card while flashing.
Once you're done with flashing you can insert it again.
Click to expand...
Click to collapse
Oh, I will try that will post result after.
*Update*
It worked! Thanks. Sorry that took so long, was fiddling with it :l

problem in software flashing....

Hello every one i have bought xperia c recently and i want to make software
4.2.2 for it but the problem was in flashtool first time i didn't find drivers
Then i tryied to install all drivers for all phones then i tryied to. Install 4.2.2
I face this problem in flashtool when i start put phone in flash mod
PHP:
[01/035/2015 02:35:14 - INFO - <- This level is successfully initialized
01/035/2015 02:35:14 - INFO - Flashtool Version 0.9.15.0 built on 15-03-2014 23:00:00
01/035/2015 02:35:19 - INFO - Device disconnected
01/035/2015 02:35:21 - INFO - Selected Bundle for Sony Xperia C (C2305). FW release : 16.0.B.2.6. Customization : World_Generic
01/035/2015 02:35:21 - INFO - Preparing files for flashing
01/036/2015 02:36:40 - INFO - Please connect your device into flashmode.
01/036/2015 02:36:53 - INFO - Device connected in flash mode
01/036/2015 02:36:53 - INFO - Opening device for R/W
01/036/2015 02:36:53 - INFO - Reading device information
01/036/2015 02:36:53 - INFO - Unable to read from phone after having opened it.
01/036/2015 02:36:53 - INFO - trying to continue anyway
For knowing my phone is branded and bootloader unlock allowed: No and i can't unlock it
Any one help me please!!!!!
same thing happened to me! i resolve that problem with FlashTool Xperia Driver Pack! see this typic : http://forum.xda-developers.com/showthread.php?t=2635830
and follow instructions
Answered
Thanks put still never. Work for c2305 iam too sad ....

Categories

Resources