My phone stuck on Android logo after i rooted and installed some custom fonts. And I have been trying to restore with the tools http://www.xtouch.ae provided with their stock firmware. That is SP multiport download tools. I tried everything as they said and the only thing i can't change in tool is Two side download with 2 options First site [UART] and second site [USB], tools choice second-site [usb] and can't select on first-site while xtouch said to choice first-site.
Any way, I scatter files and start all, times continues counting, but nothing been downloaded to my phone.
Please help
Related
Hi All,
I purchased Gionee GPad few months back for both personal usage and experimenting.
Accidentally Instead of clicking on Download, I clicked on Flash using SP Flash tools and it was dead.
Least I knew Gionee Can be flashed just by plugging in, rather I was in hurry to get it working again and got it sent to service centre and I got it working.
Sorry for the Pre story.Here comes the feat.
First thing I did was creating complete ROM Backup of Gionee GPad using MTKDroidTools 2.47.
If Your Gionee GPad id bricked, you can still get it back to default state whatever the bricked state.
1. If Phone does boot to white screen
2. If Phone does not boot to recovery and stays on Gionee Red Image.
3. If You tried different ROM and it is in Looping boot mode.
4. If Power button press does not boot you to anything and stays in black screen.
Just select the scatter file in SP Flash Tools, and follow the default steps, and click on download.
Now connect your bricked Gionee GPad, thats it, the Flash tool will download the ROM and you will get your Gpad alive.
hi..i wanna know the files that are required as my Gionee G3 is stuck on Red Gionee logo. Pl share the link to rom, and method also.
I think I need a scatter file that is .txt, and all other relevant files before I hit download. In the post nowhere the files are mentioned or the link to those files, either way.
Nice guide there
GIONEE G3
HEY GUYS I HAVE A PROBLEM MY PHONE GIONEE G3 IS IN BOOT LOOP AND WHEN I USE SP FLASH TOOLS IT'S NOT SHOWING THAT DEVICE CONNECTED PLUGGING AND UNPLUGGING SOUNDS COMES FROM PC WHAT SHOULD I DO PLZ HELP ME OUT I REALLY NEED
Thanks
Where's the download links for the rom?
HI XDA,
i got my lenovo a5000 its good but ihave problem now. i updated my phone then it turns out in "no command" on the screen with android lying their with tranngle and exlamation i have presed mutiple button but all in vain.
second i am not able to flash any cutom recovery,there is not a single solution regarding this phone that how to root as all rooting softwares i.e kingoroot,onclick.iroot,farmroot,not a singe one is helpfull for this phone i have bricked this phone numbers of times but all in vain .XDA Please look into it is this phone has an insecure kernal???I also have tried to mtk driod tools for rooting but nothing,readback operation also helpless as revocery not copied when i process it in mtk driod tool.
i really really need your guidance or help.plz keep sharing you guys are doing a great work.
jawadahmad27 said:
i got my lenovo a5000 its good but ihave problem now. i updated my phone then it turns out in "no command" on the screen with android lying their with tranngle and exlamation i have presed mutiple button but all in vain.
second i am not able to flash any cutom recovery,there is not a single solution regarding this phone that how to root as all rooting softwares i.e kingoroot,onclick.iroot,farmroot,not a singe one is helpfull for this phone i have bricked this phone numbers of times but all in vain .XDA Please look into it is this phone has an insecure kernal???I also have tried to mtk driod tools for rooting but nothing,readback operation also helpless as revocery not copied when i process it in mtk driod tool.
Click to expand...
Click to collapse
If your device is bricked, check this article: http://firmwares2you.blogspot.in/2015/07/lenovo-a5000-firmwarestock-rom-to.html
As far as custom recovery, you can create CWM easily on your own for MTK device if proper drivers are installed in computer..
Check this out: http://www.theandroidhow.com/2014/05/how-to-make-flash-cwm-recovery-without.html
Dear GokulNC,
i have done this according to your suggestion but no positive thing happen
i am getting this error when i select stock boot.img it ask create cwm i select yes after that i got this msg on rigt pane in mtk driod tools.
--->>> Connect to device <<<---
ATTENTION! File /system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode Is Found!
--- ERROR :No find KernelGZ
--- ERROR :No Split Boot Image
--- task is complete ---
hi pleaseeeeee helpppp!!!!!!!!!!!!!!!!!!
Hello
I have an android device brand imobile model iq 6.6 when i purchased it and used it for about an hour it started misbehaving by opening apps automatically like browser, wifi,data. i tried to root this device to remove such annoying built in apps and after removing two to three apps i was using fb and device suddenly switched off i tried to turn on but it couldn't turn on it stucks on boot logo and restarts again and again.
I downloaded official rom both in sd update and through cable but i m not succeeded to install. When i try to install through sd card update it starts installation but after some times it gives som error and installation is aborted.
I also tried to install through smart phone upgrade tool but no success when i press volume up and down buttons and connect it to pc it restarts again and again so the process couldn't be started. I also tried sp flash tool but there is no scatter file inside downloaded rom so that process is also fail and thus im not able to recover my phone please help me.
Thanks developers.
Hi there and welcome to XDA.
I didn't find any info related to your problem, sorry. Try searching about that on Google.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
I own a Micromax Canvas 6 Model number E485. I recently rooted my device successfully. But when I restarted my device it won't go past the logo. I searched the internet which said to go into recovery mode and then format the phone. I went into recovery mode to find that there were no commands just a dead android lying. I tried pressing the home button and other combinations unsuccessfully. This has happened for the second time. I gave my phone to a local dealer for the first time who repaired it saying that there were some files missing/corrupted on the device. Is there any method as to how I can get those files and repair my phone? Note that the battery is not removable and my P.C. would not detect my phone.
Hi there and welcome to Assist,
Unfortunately there's nothing about your device/problem on our forums.
You must install stock ROM for Micromax Canvas 6 E485 using SP Flash tool.
To install the stock firmware on Micromax Canvas 6 E485, download your firmware and SP Flash tool on your computer (use Google) and proceed.
Search more about that on google, use this tag: "Micromax Canvas 6 E485 bootloop" and see second link.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Hoping someone can help me/my dad. My dad updated his tablet like you normally would but it has been stuck in a bootloop ever since, never getting past the animated Alcatel logo. I can get into the Android recovery, tried factory reset but that just enters a loop. Tried the integrity check which it fails.
I've looked on here and the web for a flashable .zip but can't seem to find this model. Tried SP Flash tool also but to no avail. And i don't think ADB would work?
Is it just a fancy paper weight or can i salvage this for him to use?
neiltring said:
Hoping someone can help me/my dad. My dad updated his tablet like you normally would but it has been stuck in a bootloop ever since, never getting past the animated Alcatel logo. I can get into the Android recovery, tried factory reset but that just enters a loop. Tried the integrity check which it fails.
I've looked on here and the web for a flashable .zip but can't seem to find this model. Tried SP Flash tool also but to no avail. And i don't think ADB would work?
Is it just a fancy paper weight or can i salvage this for him to use?
Click to expand...
Click to collapse
Go to this link: https://www.youtube.com/watch?v=9wtnlpIwr1Y
There is a link in the description for Alcatel Pixi 4(7) Wifi.....and then download it (the file contains boot.img, magisk manager 5.7.0, sp flash tool, instructions, etc). You can comment in his youtube video to guide and help you.