I own a Micromax Canvas 6 Model number E485. I recently rooted my device successfully. But when I restarted my device it won't go past the logo. I searched the internet which said to go into recovery mode and then format the phone. I went into recovery mode to find that there were no commands just a dead android lying. I tried pressing the home button and other combinations unsuccessfully. This has happened for the second time. I gave my phone to a local dealer for the first time who repaired it saying that there were some files missing/corrupted on the device. Is there any method as to how I can get those files and repair my phone? Note that the battery is not removable and my P.C. would not detect my phone.
Hi there and welcome to Assist,
Unfortunately there's nothing about your device/problem on our forums.
You must install stock ROM for Micromax Canvas 6 E485 using SP Flash tool.
To install the stock firmware on Micromax Canvas 6 E485, download your firmware and SP Flash tool on your computer (use Google) and proceed.
Search more about that on google, use this tag: "Micromax Canvas 6 E485 bootloop" and see second link.
You'll have to create an account to post in the main forums if you have any other questions.
Good luck
Related
Hi All,
I purchased Gionee GPad few months back for both personal usage and experimenting.
Accidentally Instead of clicking on Download, I clicked on Flash using SP Flash tools and it was dead.
Least I knew Gionee Can be flashed just by plugging in, rather I was in hurry to get it working again and got it sent to service centre and I got it working.
Sorry for the Pre story.Here comes the feat.
First thing I did was creating complete ROM Backup of Gionee GPad using MTKDroidTools 2.47.
If Your Gionee GPad id bricked, you can still get it back to default state whatever the bricked state.
1. If Phone does boot to white screen
2. If Phone does not boot to recovery and stays on Gionee Red Image.
3. If You tried different ROM and it is in Looping boot mode.
4. If Power button press does not boot you to anything and stays in black screen.
Just select the scatter file in SP Flash Tools, and follow the default steps, and click on download.
Now connect your bricked Gionee GPad, thats it, the Flash tool will download the ROM and you will get your Gpad alive.
hi..i wanna know the files that are required as my Gionee G3 is stuck on Red Gionee logo. Pl share the link to rom, and method also.
I think I need a scatter file that is .txt, and all other relevant files before I hit download. In the post nowhere the files are mentioned or the link to those files, either way.
Nice guide there
GIONEE G3
HEY GUYS I HAVE A PROBLEM MY PHONE GIONEE G3 IS IN BOOT LOOP AND WHEN I USE SP FLASH TOOLS IT'S NOT SHOWING THAT DEVICE CONNECTED PLUGGING AND UNPLUGGING SOUNDS COMES FROM PC WHAT SHOULD I DO PLZ HELP ME OUT I REALLY NEED
Thanks
Where's the download links for the rom?
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
i think i might have done something wrong
i guess i did format first by using SP FLASH .... please someone provide me files that i need to install using SP FLASH
prakash001 said:
hello friends. my micromax canvas 2 plus is not running now... i am looking forward to find this solution as early as possible
my micromax canvas 2 plus is not running now, it shows only canvas logo and nothing appears, and this all happens because today i tired to install new ROM - Color-Os_V.1.2_3.zip, for that, i follow all steps from
http://forum.xda-developers.com/mic...tom-rom-color-os-rom-micromax-canvas-t2585464
, but not able to install.. during recovery mode i got error that update is abort ... i thought that may be increasing partition will help so i tried using SP flash on window xp and followed steps as discuss
http://forum.xda-developers.com/mic...q-canvas-2-t2568182/post48447661#post48447661
but after that i got "sp flash tool error 8038" and since not able to run canvas 2 plus, it shows only canvas logo and nothing happens
when i tried to use recovery mode again by pressing together "power, + volume, - volume button" i see that error saying not able to
E mount sd card
please help me friends
Click to expand...
Click to collapse
Proper drivers were not installed while flashing... Install the drivers and try again, else directly flash the stock rom using this guide www.droidarena.in/Thread-Stock-ROM-for-Micromax-Canvas-2-Plus-A110Q
Even I had bricked my phone partitioning once because of no proper driver...
IF nothing helps service centre is always there Good Luck
Hello guys,
I have put anti- theft lock system and i forgot the password. So i googled it and i that even resetting it wont remove it. The only way is to format the old flash and install a new one and i dont have a root access or cwm installed. Then suddenly my phone didn't start even when i hold the power button for 20-30 secs i think the phone is dead i couldnt even start it so pls send me an way to repair it quickly . I want a way to fix this problem. and my pc wont just detect my phone when its switched of.When i use sp flash tool my phone goes into charging mode so pls help fast.
Hi there,
All you need is discussed in this all in one thread for your device:
Micromax Unite 2 A106 Custom ROMs | Recoveries | Tweaks | MODs | Discussions
Micromax Unite 2 Root and Custom Recovery
For any request about please post in one of that threads.
Good luck
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
AndroidNoobUser said:
Hello everyone this is my first post on this forum.Greetings to everyone!
I have Lenovo A536 android 4.4 smartphone rooted with Kingroot app
I tried to update vibeUi this morning despite the warning of rooted device:angel:.Update failed and i removed the battery when screen stopped cause device didnt turn off from power button
>Phone now enters only Boot recovery menu and reaches till lenovo logo.The phone doesnt recognise SD Card
I tryed to wipe data/factory defaults and cache so far from boot recovery menu.The other options didnt work.
>Tried so far stock roms A536_S175_150105_ROW
, A536_S147_140910_ROW with Smart Phone Flash Tool a
nd Sp Flash Tool without any luck.Also Installed SDK Tools with 4.4.2 and run through CMD line
but commands wont respond.(trying adb bridge)
Please provide me with info explain me with details what should i do, because i am total amateur using
android tools.I know it was dumb to do those things to phone so i am paying the price now (The warranty of the phone is on if i messed it badly).
Thanks in advance.
Click to expand...
Click to collapse
Hi,
Thank you for using XDA assist
There is no dedicated forum for your device. However there is a general forum for android here http://forum.xda-developers.com/android/help where you can try to ask to get the expert's help
Good luck.
i have a micromax magnus a117
one morning when i was switching on my phone my it stuck at micromax logo
i asked one of my friend he said this condition is called boot loop
so i tried some software
its Smart phone flash tool
i tried to download file
but its is showing NO SPACE 5069 something like this
so i searched on google
& landed here
https://www.youtube.com/watch?v=wiV5jqYp2G8
i followed his steps
it was dumbest thing i did in 2015
i was following steps & he deleted everything included bootloader
& now i bricked my phone (when i am pressing power button it is not loading anything not even micromax logo so i think its called bricked)
is there is anything i can do ??
please help