Database Info

Please help me with download mode!!

Hello, i am currently trying to root my sisters galaxy s 4g... Her Baseband is T949VUVKI1. Firmware is 2.3.5, Build Number is GINGERBREAD.VUVKI1. i remember flashing her phone to 2.3.5 and download mode working perfectly fine, and for some reason it wont go into download mode at all... the computer is not recognizing her phone either. YES, i do have usb drivers installed otherwise my galaxy s 4g wouldnt be recognized on my computer(odin specifically, not turning yellow). Please help, i have searched everywhere in the internet and tried almost everything... Volume up and down and plug charger, batter out volume up and down usb and battery in etc. PLEASE HELP!! Thank You in Advance.

Nvm
10c

1. Try reinstalling to drivers. Also make sure you're using the same USB port as Windows can be funny about it it sometimes.
2. if download mode is being difficult, go download the Android SDK from www.android.com. Install it, run it, and only download the platform tools. When that's done, open a command promt, CD to where the plaform tools installed (either c:\program files\Android\Android-sdk\platform-tools or c:\program files (x86)\Android\Android-sdk\platform-tools ), then issue the command: adb reboot download.
3. I suggest you check the dev section for bhundven's one-click collection. Uses Java and Heimdall vs. ODIN and works easily.
Sent from my SGH-T959V using XDA App

i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!

Tytan0007 said:
i have this issue 2.3.5 messed me up. Odin sees my phone in debug mode but not in download mode...using odin 1.85 sinse it is the only version that responds to my phone at all. help please!
Click to expand...
Click to collapse
Get it back into download mode, go grab a bhundven's one-click. The one-clicks utilize Heimdall vs. ODIN, which means they use open-source USB drivers instead of the proprietary Samsung drivers. See if that enables the computer to see the phone. If so, flash the one-click

Should I uninstall the samsung drivers prior to using Heimdall's One-Click?

Tytan0007 said:
Should I uninstall the samsung drivers prior to using Heimdall's One-Click?
Click to expand...
Click to collapse
That's a good idea. Some people have reported conflicts between the drivers.

Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.

Tytan0007 said:
Why would only Odin 1.85 see my phone in USB Debugging and not in download mode? And all other Odin verisions never see my phone, no matter what state it is in... I am at work so I will give the one click another try when I get home. I never thought of uninstalling the Samsung drivers prior to install; however, I did use the one click method to no avail. However, Heimdall's one-click was able to see my device it just kept giving me a driver error. This is so crazy it might just work.
Click to expand...
Click to collapse
I wish I had a good answer. ODIN's a funny animal. I've been fortunate and not had any problems with it. I am hoping you are correct - maybe it was just a driver conflict. Let me know how it goes.

didn't work...

You could try downloading a terminal app from the market. Open the terminal and type:
reboot download
See if that does it.

***Update***
Okay, so Oneclick was not working at all no matter what I did with the drivers. However, in all my tinkering with it I installed the Samsung Driver, the Open Source one, and some gadget driver as well from oneclick.
Doing this put all these drivers in my computer. Then I went into my Device manager (Win 7) and looked at my USB driver and I uninstalled everything and went to the stock win 7 usb driver. Then I plugged my phone in and my computer began searching for drivers for this device when it decided that it would be a good idea to load all three drivers at once and voila my phone was then showing up on ODIN 1.85.
I then proceeded to flash my phone with a rom, probably the wrong one considering I was coming from 2.3.5 and my phone boot looped and then soft bricked(sorry if I used these term incorrectly, noobin it).
After, some nervous moment of scouring XDA I found the god-send of a post on getting in to download mode, using odin, and flashing stock 2.3.6 - thank you Raver(I believe). When I did this, my phone magically started obeying ODIN like a devout viking and is now running 2.3.6 superbly.
Keeping with my phones newly found viking heritage, I intend to figure out how to properly root it, update the kernal and modem(not sure which one is best), get CWM, and subsequesntly put in Valhalla Black.
Seeing as though this last rendevous with flashing caused me a little scare I may hold off and wait to see what the next big update is (maybe a port ICS variant) and then go with that.
Anyway, thank you Stephen for helping me out with this and to everyone in this post.

Here's some reading for you Tytan,
http://forum.xda-developers.com/wiki/Samsung_Galaxy_S_4G#FAQ_.28with_answers.29
PS: Unless you wanna brick your phone, do not flash anything that isn't intended for the SGH-T959V Samsung Galaxy S 4G. You're saying you wanna flash a Vibrant ROM. You can, if you want an expensive paperweight. Happy flashing!

2.3.5 may have been for vibrant...yeah I think I got lucky. I did it prior to knowing about xda.
Sent from my SGH-T959V using XDA App

Tytan0007 said:
didn't work...
Click to expand...
Click to collapse
How are you getting into download mode?
There was a post in another thread where the person apparently was using the power menu to get into download mode or maybe the adb command.
Have you tried both the old fashion volume +/- and plug in usb cable? Or the adb command?
Do you have access to another computer? Believe it or not sometimes just changing computers will make the difference.
Weird when I replied there was no posts other than the ones on the first page...oh well glad its working now.

[Q] odin won't recognize my galaxy p5100

Hi guys. I have a problem since months and I couldn't find an answer. When my tablet is in download mode it 's not recognized by Odin (3.04 or 1.85). If I connect it in normal mode to my pc it works fine both with kies and pc. I tried to enable disable debug mode, enable disable mtp, I tried on several pc's with the same results. I am using the cable that came with the tablet. I have tried running odin without running kies. Please advise.

Try reinstalling the drivers if still nothing get mobile odin use that to root and flash roms

PUZURU said:
Hi guys. I have a problem since months and I couldn't find an answer. When my tablet is in download mode it 's not recognized by Odin. If I connect it in normal mode to my pc it works fine both with kies and pc. I tried to enable disable debug mode, enable disable mtp, I tried on several pc's with the same results. Please advise.
Click to expand...
Click to collapse
Make sure Kies isn't running at the same time as using odin too, there's a conflict between them. Which version of Odin are you using? Version 1.85 is what i use.

Transipire said:
Try reinstalling the drivers if still nothing get mobile odin use that to root and flash roms
Click to expand...
Click to collapse
I have tried on several laptops (win 7 X86 and win 7 X64). On all of them I installed a fresh kies. The same problem. BTW i use the cable from the box that came with my tab.

squ89r97 said:
Make sure Kies isn't running at the same time as using odin too, there's a conflict between them. Which version of Odin are you using? Version 1.85 is what i use.
Click to expand...
Click to collapse
Didn't help. I tried with and without kies. I am using odin 1.85. I begin to think there is something wrong with my android version. My tablet isn't rooted.

can't think of much more to help you, apart from delete everything off the pc. Everything!
then follow this guide without installing kies - just the smsung usb drivers. all else failing ??? that sucks!

squ89r97 said:
can't think of much more to help you, apart from delete everything off the pc. Everything!
then follow this guide without installing kies - just the smsung usb drivers. all else failing ??? that sucks!
Click to expand...
Click to collapse
Yep..at leas I am happy that my tab is working..Thanks for the help!
If somebody else can help...?

[Q] Secure download: Enable and can't use odin to flash anything or stock rom

I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?

Use the latest version of Odin

kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try diffrent USB ports on the computer and diffrent signal cords

kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
Did you enable usb debugging? Oh my bad, scratch that, try connecting your phone to your pc b4 you open Odin (using the latest Odin and run as admin)

kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
hi! i have the same problem , did you find a solution please? thanks

That secure download enable thing is normal mine has the same thing. Your phone is not connecting for whatever other reason

Try flashing exact stock firmware with odin.
SMG920I
POWERED BY INSUFFICIENT RAM
TUNED BY TEAM PINGPONG
DRIVEN BY KFORKAI

darksimo said:
hi! i have the same problem , did you find a solution please? thanks
Click to expand...
Click to collapse
Yeah i got it flashed. Turned out that i used an old odin also you have to get a firmware which has the same csc or one that it compatible with your device. Info on samsung csc can be found on the net, look for multi csc codes if you wanna change to software from another carrier.
Sent from my VS980 4G using XDA Free mobile app

Before you start flashing always disable reactivation lock. Othervise flashing may fail.

ODIN won't detect Galaxy S5 G906K [KT]
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]

Resolved.
nano-dev said:
Hello All,
I've been having the same issues as people in this thread but have been unable to come up with a solution so far. I've tried to the whole battery trick which sometimes works with other Samsung devices but have been unable to solve this problem. It seems that ODIN just won't detect the 906K while it is on the recovery mode window. However if the phone is booted normally ODIN sees its fine.
i.imgur.com/boK57io.jpg
Can anyone provide some assistance?
Thanks in advance..
ODIN Version: Odin3_v3.10.7
Device Model: Samsung Galaxy S5 SM-G906K [kt]
Click to expand...
Click to collapse
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.

kingroot not working!
nano-dev said:
So after an entire day of investigation and logging I've figured out that this was an issue related to a carrier update by Olleh (KT). For anyone who runs into the same problem on the SM-G906K I recommend KingRoot as a means of getting started for root. CWM/TWRP are also methods that I tested with success.
I hope this helps someone who has the same problem down the road.
Click to expand...
Click to collapse
.................................................................................................................................................................................................
kingroot was working when they released V.4.5.0 but now not working anymore :crying:
sorry for my bad English

kekeke9e said:
I'am using S6 G920F. When i connect it to my computer, everything is ok, i setup all driver. However, when i put my phone in download mode to flash stock rom or root file by odin, odin 3.10.6 can't connect with my phone. In screen of download mode, i see " Secure dowload: Enable" in blue. I tried to use older version of odin but all are failed
I was already turn off Samsung Reactivation Lock, check USB Debug.
How to fix this problem?
Click to expand...
Click to collapse
try using box tools like z3x to see if problem would be solved

Update: i fix it by unmouting checking and mounting back the phone...weird a part or idk had to be not well attached.

Hello
I was trying to root Samsung galaxy grand prime G530H. But it has stucked in 'downloading...'
Secure Download : Enable in blue

Why can't I unlock the bootloader on FZ? There is just no such option in Dev Mode.

Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?

Feyaad said:
Hi there, have Samsung sm-G935F..stuck at Samsung logo..tried 2 flash file available from z3x team, shell. When using Odin to flash the programme freezing, when using Samsung tool to flash, it's reading the device and file but it's gerring error. Any advice on this?
Click to expand...
Click to collapse
You could always try the S7 edge specific forums.
Not being sarcastic

root the chines root
i have sm-n9006 i cant root my phone
also have the secure download enadled in blue
any help ??
my phone is a chinses version ... which doesnt have the play store

Hello
Do you have your bootloader blocked, the new version of firmware enabled this option, you need to go to development options and enable the option of OEM, and that's it, you can flash whatever you want

Galaxy s6 stuck at boot? Unable to fix

Hi xda members, im new in here and i was hoping for a bit of help
My phone is galaxy s6 SM-920T
I was reading on the net when the phone powered off and started restarting and restating again and stuck at book logo "powered by samsung".
I am not able to go into recovery mode but i can open the os download mode.
Tried many times with odin and no luck
I think due to the phone being full encrypted by me nothing can be done, is there any posibility? Thanks

The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.

crazyportuguese said:
The same here. I cant get into recovery. I had Terminator Rom installed. I can get into download mode but odin doesnt detect it. I eventoght the usb door was damadged so paid 60$ do replace it at samsung. But odin still doesnt not recognize it. Odin does recognize my Samsung Tablet 4.
Click to expand...
Click to collapse
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...galaxy-s6-stock-firmwares//url]
Report back.

IMEIRescue said:
Flash stock OJC firmware with Odin http://imeirescue.com/samsung-firmw...th a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
Have you made sure you have the latest Samsung drivers installed on your computer?( http://developer.samsung.com/technical-doc/view.do?v=T000000117) And after that, try to see if Odin recognize it download mode, after you have confirmed you wanna flash new Rom ( volum up)

crazyportuguese said:
Odin doesnt not detect the phone on download mode.
Any tip ?
I have tryed all cables and that worked with a galaxy tab i have.
Thanks for your help
Click to expand...
Click to collapse
I've had cases where you had to put the phone into download mode THEN open Odin for it to be seen. Maybe try that.
With it in download mode and plugged up open devices and printers and scroll to bottom and see if it shows up. Would be called gadget_serial. Some computers take a while to load the drivers for it as well. You may want to click little popup menu on bottom right of desktop by the time and date and see if it shows it is loading drivers for it. It will not show up until the gadget serial drivers are installed.

Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.

Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.

ProtoDeVNan0 said:
Make sure that You're using USB 2.0 not 3.0. My Note 4 worked through usb3.0 without any problem. And S6 doesn't. And if Odin reflash won't fix it. Get pit file and flash it with it.
Click to expand...
Click to collapse
you need samsung drivers and check the cable.
Any help for me?

crazyportuguese said:
Thanks for the help. Nothing worked. It doesnt not recognizes the S6 only my Galaxy Tab 4. Could it be that the usb door wasnt repaired proprely ? Windows doesnt even detect the phone no gadget_serial. Nothing.
Click to expand...
Click to collapse
So it doesn't recognize it all all? Doesn't give you unable to read device error or anything?
---------- Post added at 07:20 PM ---------- Previous post was at 06:49 PM ----------
yyyy0000zzz said:
you need samsung drivers and check the cable.
Any help for me?
Click to expand...
Click to collapse
First thing to try would be flashing stock firmware with Odin.
https://www.dropbox.com/s/rb8iduv2o9i1ece/G920TUVS3DOJC_G920TTMB3DOJC_TMB.zip?dl=0
I recommend Odin 3.10.6
https://www.dropbox.com/s/1dlmxtc0ic7u7ew/Odin3_v3.10.6.zip?dl=0
Report back.

already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox

yyyy0000zzz said:
already done, with same results stuck at boot loop, tried to add a custom recovery which got denied by knox
Click to expand...
Click to collapse
Sounds like DRK may be damaged.
Take the stock OKC firmware and open the archive with 7-zip or winrar and extract the system.img and boot.img.
Download and unzip this:
https://www.dropbox.com/s/bsreazoonsw4gwv/tar-Tool_Odin3-v3.07_by_mkh.mourad.zip?dl=0
Copy/paste the system.img and boot.img into the software directory and run the batch file. It will spit out a system.tar.md5 and boot.tar.md5
Flash the system.tar.md5 with Odin as AP then flash the boot.tar.md5 as AP.
Report back

thank you gonna have to try tomorrow due to bad USB cables, will let you know thank you so much for your help

If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..

fOmey said:
If all else fails, just boot your phone into download phone and install Samsung Kies and restore it using that.
You will need the model & serial number of your phone. It will restore the latest stock firmware on your phone for you..
Click to expand...
Click to collapse
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell

joshua44 said:
how can I check the serial number WITHOUT my box and booting into the phone? my phone's bricked as hell
Click to expand...
Click to collapse
You cant, I suggest using a friend or family member's serial number that has the same model phone.. the serial number is a way of identifying the correct carrier specific rom.

G920TUEU3COK1_G920TXAR3COK1_G920TUEU3COK1_HOME.tar.md5
G920T1UVU3DOI5_G920T1TMB3DOI5_G920T1UVU3DOI5_HOME.tar.md5
Reflash your phone with one of this ROM will help you to make your problem resolved 100%

[Need Help] Very bad case of soft brick S9+

Hello everyone,
so my phone is soft-bricked after failure attempt to flash combination files in order to fix the csc.
I follow this thread, but the problem actually has nothing with that.
I used the latest patched odin V3.13.1, with a combination file named COMBINATION_FAC_FA80_G965USQU3ARG2.tar, and the proccess failed at flashing the system, and now i'm stuck; unable to flash other firmwares.
Before that, the phone was working perfectly after I've flashed a G965U1 firmware on it, in order to get rid of the bloatware of the original branded G965U (I don't live in the US).
Also, it successfully OTA updated to the latest G965U1UEU3ARK5 Firmware just a few days ago.
Things that I've tried so far with no success:
*Used different usb ports, both usb 2 and usb 3; and different cables
*Using both an Intel-based PC, and an AMD-based. (I know it may sound unrelated, but thats actually what prevented me from flashing the G965U1 fmwr the first time I tried, because i was using and AMD PC)
*Reinstalling Drives, installing latest kies, installing latest samsung smart switch
*using older versions of Odin
*tried to install the original Sprint firmware (v2) G965USQS2ARF4 through odin
*tried to install the G965U1UEU3ARK5 firmware through odin
The phone is stuck in download mode. sometimes if I disconnect and reconnect it, I get an unrecognized usb device message. so I need to reboot the phone again to download mode so the pc will recognize it.
and the result is always a failure:
either due to rev check, with the original OEM firmware
during the installation at 'vendor'/'system' step, due to auth error, when trying the G965USQU3ARG2 Combination file or the G965U1UEU3ARK5 files with patched odin
or even before that step with older versions of odin.
I'm out of ideas... I hope someone here has the knowledge to help in some way, Please...

Amsiman said:
Hello everyone,
so my phone is soft-bricked after failure attempt to flash combination files in order to fix the csc.
I follow this thread, but the problem actually has nothing with that.
I used the latest patched odin V3.13.1, with a combination file named COMBINATION_FAC_FA80_G965USQU3ARG2.tar, and the proccess failed at flashing the system, and now i'm stuck; unable to flash other firmwares.
Before that, the phone was working perfectly after I've flashed a G965U1 firmware on it, in order to get rid of the bloatware of the original branded G965U (I don't live in the US).
Also, it successfully OTA updated to the latest G965U1UEU3ARK5 Firmware just a few days ago.
Things that I've tried so far with no success:
*Used different usb ports, both usb 2 and usb 3; and different cables
*Using both an Intel-based PC, and an AMD-based. (I know it may sound unrelated, but thats actually what prevented me from flashing the G965U1 fmwr the first time I tried, because i was using and AMD PC)
*Reinstalling Drives, installing latest kies, installing latest samsung smart switch
*using older versions of Odin
*tried to install the original Sprint firmware (v2) G965USQS2ARF4 through odin
*tried to install the G965U1UEU3ARK5 firmware through odin
The phone is stuck in download mode. sometimes if I disconnect and reconnect it, I get an unrecognized usb device message. so I need to reboot the phone again to download mode so the pc will recognize it.
and the result is always a failure:
either due to rev check, with the original OEM firmware
during the installation at 'vendor'/'system' step, due to auth error, when trying the G965USQU3ARG2 Combination file or the G965U1UEU3ARK5 files with patched odin
or even before that step with older versions of odin.
I'm out of ideas... I hope someone here has the knowledge to help in some way, Please...
Click to expand...
Click to collapse
Guys at imeigurus has a service. Check on them. Those guys have access to special Samsung firmware that they can manipulate Samsung's as they like. They do what others can't, they can support you remotely using teamviewer. But snap the download pic here let me see

show me your device in download mode

leonardojt said:
Guys at imeigurus has a service. Check on them. Those guys have access to special Samsung firmware that they can manipulate Samsung's as they like. They do what others can't, they can support you remotely using teamviewer. But snap the download pic here let me see
Click to expand...
Click to collapse
successnbd said:
show me your device in download mode
Click to expand...
Click to collapse
OK so that's how it looked like:
download-mode
after writing this post I realized that I haven't tried flashing an OEM rev3 firmware
so I downloaded one after finding out which one is the right file
and I tried flashing it on a completly other pc than the 2 I've already tried it on
and it worked:victory:
here's the recovery after the successful flash:
recovery