Database Info

[ROM] [Firmware] QMobile A10 Noir - Jelly Bean Update 4.1.1 - Everything You Need

free photo hosting
photo sharing sites
New Jelly Bean update for QMobile Noir A10 (14-03-2013)
Guys ! The Auto Rotate Issue Has Been Fixed in Jelly Bean Rom u Can Download it from the following link.
Download Link: QMobile_A10_JellyBean_Update(13-03-2013).zip
Update Features:
Auto Rotate Issue Fixed
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
How to install:
DO AT YOUR OWN RISK!!!
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
Old ROM Link
Download Link: QMobile_A10_JellyBean_Rom.zip
Features:
Jelly Bean 4.1.1 ROM
Rooted
Deodexed
Very fast and smooth.
Bugs:
Auto Rotate Not Working....
How to install:
1. Reboot into cwm recovery if don't have cwm then install it first.
2. Wipe data/factory reset.
3. Wipe cache.
4. In mounts and storage select format system.
5. In advanced menu wipe dalvick cache.
6. Once all the wiping is done, select install zip from sd-card and select mobile_a10_jellybean.zip
Once complete reboot and enjoy!!!
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............

All the info shared here comes from my blog here http://qmobilea10.blogspot.com
Sent from my A10 using Tapatalk 2

Your instructions are a bit wrong.
For this tool to work, the device needs to be detectable in ADB (you can check by typing 'adb devices' in command prompt).
If you follow STEP 5, this won't be possible and the rooting process won't be able to start.
Step 5 needs to be ignored. You need to put the device into USB Storage mode for this process to work.

bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
i have already root my a10 and come to xda post the mathod and find ur post u already done as i buy this phone some days before u posted the method for macromax a110 the same spec every t same as qmobile noir a10 and thx for it em happi tht peoples working this kinda stuf in pakistan and i need som devolper who devolp sum custom roooms for a10 and micromax as well..
for noir 10 follow my post..
fisrt of all thx brother for ur post follow 1st post of bahiwala
1 download the file Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging(as it should be enabled but check it if u disabled it...)
3.. just ignore tht driver download step and install QMobilePCTool its provided in cd wid box install it and connect ur phone with usb cable and dropdown the notification bar and select the connect 2 media storage if its a usb storage then leave it now open ur QMobilePCTool and then choice ur devic click on refresh now a10 comes up selct it and install the drivers for a10..
4..extraxt the Root_with_Restore_by_Bin4ry_v15.7z with winrar aur 7 zip u like then run the file runme.bat and type 1 from keyboard and entr it
and then follow the instuction for restore and phone must be restart atleast 2 tyme..... and its done now youre rooted
Why we need 2 rooot we can instaal custum rooms backup the orignal stock room and over clock the processor and use sum apps like screenshot apps for take the screeen shot and etc enjoy msg me if any problem......

can we run jelly bean on QMobile Noia A-10
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???

Farri i dnt think so tht we can yeah in a way we can update it as we if flash custum room of jely bean it will take some tyme but i think we dnt have radio framw as 4.0 custum rooms when i flash one its work grat sum extra animation goood battry more battry bakup more fast but my signals was vaishd sooo i restore my stock room sooo the problm is radio as this rooot mathod is for micromax in india they use 3g network mostly and there frequency are not same like pakistan as i googled it sooo tht make signal go ad i seaching for a long tyme for radio but em not able 2 find there is sym light for 4.1 but sum problems...........................

Any custom rom for qmobile noir a6?
Sent from my Qmobile A6 using xda app-developers app

Any way to install custom rom on Qmobile A2?

Hi.. I want to ask some questions.. If I only root my my phone nd do not install clockward mode.. then can i unroot my phone? and it will be unrooted as like was original?

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
When u root ur phone it displays two options, one is root and second option is to unroot ur device. Even after installing cwm u can revert back to stock recovery anytime.
Sent from my Micromax Canvas 2 using Tapatalk 2

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
farri613 said:
Hi,
Bhaiwala and all other friends, kindly some one tell me can we update our QMobile Noir A-10 on JELLY BEAN???
Click to expand...
Click to collapse
No update yet for our qmobile a10. But there is a jelly bean update on the way for micromax a110.
Sent from my Micromax Canvas 2 using Tapatalk 2

gps
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
salluhassan said:
i think gps issue is still not resolved by doing your method, but thanks to bhaiwala and lonely , i have my qmobile rooted now ...
Click to expand...
Click to collapse
Bro!
t first time GPS fix takes some time. Try it with all options selected under location settings
Sent from my Nexus 7 using Tapatalk HD

Stock rom
bhaiwala said:
QMobile Noir A10
How To Root QMobile A10 Noir
First of all Lets start with the root process.
1. Download the following file.
Root_with_Restore_by_Bin4ry_v15.7z
2. Enable USB Debugging on your device to do that goto Settings>Development>USB Debugging
3. Connect your device to any laptop/PC and install drivers using PDANet
4. Unzip the root tool downloaded above.
5. Change the Mode of your device from USB Storage to Media Device to proceed further.
6. Run the Runme.bat file as shown below.
7. A command prompt with green letters will come up on your screen.
8. Follow the onscreen instructions carefully. To start off, you willl need to type in a "1" and press enter.
Note: If you ever want to Unroot your QMobile A10, follow the above steps till you reach this one and then, instead of typing "1", type "x" and hit enter. Follow the instructions that appear on the command prompt after that.
9. Your device will reboot during the process after which Bin4ry will copy some files to your device.
10. When the green letters in the command prompt says Have Fun!, then... Have fun.
That means, your device is rooted now and you can enjoy Superuser permissions!
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM Recovery on QMobile Noir A10
1. Download cwm recovery from the given link cwm_Recovery_QMobile_Noir_A10
2. Extract it, rename it to recovery.img & transfer it to the root of your SD Card.
3. Download and install MobileUncle MTK Tools from Google Play Store and run it.
4. Select the option recovery update from the application and when it ask for path guide it to the location where u copied the downloaded recovery file.
5. It will install and upon successfull installation it will ask you to reboot into recovery, select OK to go to newly insalled cwm recovery to confirm the installation.
6. If anything goes wrong you can download and install Stock Recovery For QMobile Noir A10 by using the above mentioned process again to revert back all the changes.
--------------------------------------------------------------------------------------------------------------------------------------------------------
GPS Fix For QMobile Noir A10 for faster Lock
1. First of all you need a rooted QMobile Noir A10.
2. Download the modified gps.conf file from Here.
3. Browse to system/etc using root explorer and mount the system as read / write using the button present on top right of screen.
4. You will find a file gps.conf already present in the folder. Rename that file to gps.conf.bak, it will act as a backup for the original file.
5. Unzip the file you downloaded in Step 2, and copy the extracted gps.conf file to system/etc.
6. Reboot your Qmobile Noir A10.
7. Download GPS Test from Google Play Store and test your GPS now. (activate your gps first)
You will notice the improvement in getting GPS Lock Now.....
Enjoy............
Click to expand...
Click to collapse
CAN YOU PLEASE PROVIDE ME WITH THE STOCK ROM (cwm backup) I HAVE MESSED UP MY CAMERA AND REALLY NEED THE STOCK ROM

Can somebody please upload the stock backup files so that i can restore from it(my phone is messed up) or please upload your "system" folder pleae

System.img and nandroid.md5 required, please upload these files, get from gscript or cwm backup

Re: QMobile A10 Noir - Everything You Need - Rooting - CWM Recovery - GPS FIX
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*

well now i dont need the full backup, please anybody just go into your system folder and inside there is "lib" folder. I just need the lib folder please
---------- Post added at 02:26 PM ---------- Previous post was at 02:14 PM ----------
shantam said:
U can just flash micromax a110 roms on ur device
*Sent_From _Qmobile_Noir_A8*
Click to expand...
Click to collapse
bro i want to remain on stock qmobile, would you be kind enough to use root browser to navigate to your system folder and then share your "lib" folder
"system\lib" it is required to bring my camera to life
please

Need help please
I have problem in step 4
When i extract the Root_with_Restore_by_Bin4ry_v15.7z and run cmd command open and when i select 1 the problem occurred says " THE SYSTEM CANNOT FIND THE PATH SPECIFIED"
PLEASE HELP ME
i try every possible way to work this out but it couldn't i even install pdanet but still didnt work.
I need a possible solution that where did i go wrong.
Thanks

Jelly Bean Update for QMobile Noir A10
Good News for all Qmobile A10 users!!
Jelly Bean Update is available for QMobile Noir A10. Link added in first post.
Download from first Post & update your phone.:good::good:

Spice MI-530 stellar pinnacle root, cwm and development!!!

Update- 1/3/2013
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here.....
How to root with su and busybox support:
1. Follow the procedure in thishttp://forum.xda-developers.com/showpost.php?p=21982460&postcount=1 thread to install drivers for mi-530 (dont use superoneclick just install the drivers).
2. Follow this http://forum.xda-developers.com/showthread.php?t=1886460 guide by bin4ry to root the device and install su and other dependencies.
3. Make sure you are rooted if you can see superuser app in app drawer,congratulations you are now rooted..
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
http://db.tt/UDIARWEY
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Note-All mods that i share here have been successfully tested by me. But still as per tradition-
DO NOT FLAME ON ME IF SOMETHING GOES WRONG.

Reserved

Reseved

One more!!

CWM for mi-530
agmtpd said:
One more!!
Click to expand...
Click to collapse
I have used it just. It is good. Automatically it rebooted.
We are waiting for Custom Rom please, you can do it young man
Thanks

agmtpd said:
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here....
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Click to expand...
Click to collapse
Please tell me How to root this set???:crying::crying::crying:

Root MI 530
sexydjb said:
Please tell me How to root this set???:crying::crying::crying:
Click to expand...
Click to collapse
Rooting process is same as mi500 u can see older post for rooting mi500. it will help u.

Thanks a lot
lalitjoshi06 said:
Rooting process is same as mi500 u can see older post for rooting mi500. it will help u.
Click to expand...
Click to collapse
batch file worked fine, but had to install drivers via pdanet, oneclickroot didn't worked for me.
Waiting for a jb update now.....

agmtpd said:
This thread is meant for MT6577 based spice mi-530 device...
I will be sharing all development related information here....
Install CWM for spice mi-530:
*root* required
1. Download the cwm recovery ported to mi-530 from here -
and copy it to root of your sdcard
2.Download and install mobile uncle tools from play store or any other source
3. Open mobile uncle tools from app drawer and grant su permission when asked.
4. Choose "recovery update" option and select recovery.img you just copied to sdcard and confirm.
DONE!
Boot into recovery by pressing vol+ and camera while powering on.
More coming soon!!!
Click to expand...
Click to collapse
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...

I do no know ! Whether I can reply?
Did you try this.
Switch off.
Hold volume up, menu key and power on key simultaneously till you get the screen pop up screen.
Wait few second touch home button.
You will get it.
Or else Try with "4Zert" method for rooting then put the CWM.
Better luck
Sent from my Spice Mi-530 using xda app-developers app

Make sure you have rooted your device....
Can you see superuser app in app drawer if you have followed bin4ry root method??
If yes then make sure busy box is installed....

Recovery issue fixed
sexydjb said:
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...
Click to expand...
Click to collapse
I think u r using old version of mobile uncle tool use latest one powerd by NJava. old versin dosent show recovery update. as u do rightly it will reboot automaticly in recovery mode. keep recovery.img in internal storage of phone. or u r using wrong combination of keys. press hold vol+ key only & powerr on untill u enter in recovery mode dont use camera button.
I think it will heip u.

Dude, this phone is already rooted,
1. just enable root access from developer settings
2. Then install superuser app from Google play
Sent from my Spice Mi-530 using xda app-developers app

Fixd recovery
sexydjb said:
I have succesfully rooted the set, but now as i try to install the recovery image, it asks permission to go to recovery mode, then nothing happens, the device just restarts.
On tryin to move to recovery mode by vol+ and camera key during startup, nothing happens, the device just starts normally.
Please help...
Click to expand...
Click to collapse
Dear u r using older version of mobile uncle tool. get latest version powered by NJAVA. In that there is a option recovery update which is not available in older version. older has recovery only.
u should keeep recovery.img in phone memory not on sd card.
or dont use camera key to enter into recovery mode the combination is Vol+ hold & turn power on untill u enters into recovery.
I think it Will Help u.

pradeepsmehra said:
Dude, this phone is already rooted,
1. just enable root access from developer settings
2. Then install superuser app from Google play
Sent from my Spice Mi-530 using xda app-developers app
Click to expand...
Click to collapse
no its not pre rooted options u r ref are standard. if u install su or superuser from market it will show as install but doesn't mean that u ve rooted for more clarity try any root app like root explorer or rom manager. it will not ask for root permission or may show that phone is not rooted.
for rooting unlockroot 2.3 will also work but u need to install mt6577 drivers.

babamanan said:
no its not pre rooted options u r ref are standard. if u install su or superuser from market it will show as install but doesn't mean that u ve rooted for more clarity try any root app like root explorer or rom manager. it will not ask for root permission or may show that phone is not rooted.
for rooting unlockroot 2.3 will also work but u need to install mt6577 drivers.
Click to expand...
Click to collapse
Can some one tell me the GPU & CPU of this Mobile..
Planning to buy it (need to confirm)...

Addicted2xda said:
Can some one tell me the GPU & CPU of this Mobile..
Planning to buy it (need to confirm)...
Click to expand...
Click to collapse
GPU - power VR sgx 531 single core
RAM - 1 gb DDR
CPU - mediatek MT6577 dual core overclocked @ 1.2 ghz

Dude
Check this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Spice Mi-530 using xda app-developers app

babamanan said:
GPU - power VR sgx 531 single core
RAM - 1 gb DDR
CPU - mediatek MT6577 dual core overclocked @ 1.2 ghz
Click to expand...
Click to collapse
Mediatek? Thanks for the info... better save some more money and invest on a One S / Desire X

Addicted2xda said:
Mediatek? Thanks for the info... better save some more money and invest on a One S / Desire X
Click to expand...
Click to collapse
its not so bad I personally recommend lava a700 for much batter display quality @ 4.5 " IPS as compared with this spice mi 530, both can handle smooth play upto 720p videos but spice mi 530 plays 1080p videos thru inbuild player only at the cost of quality, try to look at lava a700.

Increase System Partition In A110Q

Increase System Partition Of MMX Canvas 2+​
This why am posting because in many times we never get full Rom due to system partition less and many developer also decrease lots of system apps which are usefull.
Hence, I Thought lets increase system storage. So, here is the procedure to follow it.​
FAQ​
1. IS THIS SAFE FOR CANVAS 2+ ?
-> YES,IT'S TOTALLY SAFE.
2. IS THIS EFFECT TO INTERNAL STORAGE ?
->NO,THIS IS LIKE COMPUTER HARD DISK HOW WE CAN MANAGED IT'S PARTITION.
3. HOW TO REVERT IT BACK ?
->DOWNLOAD STOCK MMX ROM FROM http://www.a110q.in/2013/06/stock-rom-for-micromax-canvas-2-plus.html AND FLASH IT.​
REQUIREMENT​
1. COMPUTER
2. SOME KNOWLEDGE ABT COMPUTER.
3. SP FLASH TOOL
4. ROOTED MMX CANVAS 2+ ( ONLY FOR BACKUP IMEI, U CAN ALSO USE MTK DROID TOOLS TOO BACKUP IMEI TOO. )
5. DRIVERS OF MMX CANVAS 2+​
->DOWNLOAD LINK<-​
1. SP FLASH TOOL LINK http://d-h.st/Q96
2. SYSTEM INCREASING FILE LINK http://d-h.st/kAL
3. DRIVERS LINKhttp://d-h.st/UDf
4. IF ABOVE DRIVERS NOT WORKED DOWNLOAD THIS DRIVER AND INSTALL LINK http://d-h.st/5or
​
NOTES​
1. PLEASE BACKUP UR ALL DATA FILES ETC. FROM CELL BECAUSE IT'S GOING TO BE FORMAT.
2. YOU MAY LOOSE UR IMEI BUT DON'T PANIC SEE DOWN TO BACKUP IMEI.
3. DON'T NEED TO DOWNLOAD CWM RECOVERY I'VE INCLUDED IN IT.
​
-> IMPORTANT STEPS TO FOLLOW ( COMPULSORY ) <-​
* IF U CELL ROOTED THEN DO THIS TO BACKUP UR IMEI AND WHENEVER U WILL GET INVALID IMEI U CAN USE FROM Ur CELL ONLY *
1. DOWNLOAD ROOT EXPLORER APPS OR ANY ROOT BROWSER U PREFER
2. GO TO THIS LOCATION DATA (IF ASK SU GRANT IT TO SEE THIS LOACTION )>ROOT>DATA>NVRAM>MD>NVRAM>NMD_IMEI>MP0B_001 ( COPY THIS FILE IN UR SD CARD OR IN PC AS THIS FILE U CAN USE UNLIMITED TIMES TO RESTORE IMEI WHENEVER U GET INVALID IMEI) ( MAKE SURE COPY THIS FILE WHEN U R NOT FACING INVALID IMEI).
3. TO RESTORE IMEI IN ANY ROM OR STOCK ROM ( SIMPLY ROOT THE ROM)
4. FROM STEP 2 COPY THAT FILE ( MP0B_001)
5. THEN GO TO THIS LOCATION USING ROOT EXPLORER DATA (IF ASK SU GRANT IT TO SEE THIS LOACTION )ROOT>DATA>NVRAM>MD>NVRAM>NMD_IMEI>PASTE IT HERE AND REPLACE WITH OTHER ONE (FROM STEP 4).
6. NOW SET PERMISSION TO
OWNER R-W-E( execute)
GROUP R-E-
OTHER R-E-
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
7. NOW REBOOT..
8. UR INVALID IMEI WAS SOLVED AND ENJOY...
* ALTERNATIVE METHOD IS USE MTK DROID TOOL SOFTWARE.*
************ PROCEDURE *************​
1. INSTALL DRIVER ( WHICH WAS DOWNLOADED FROM DOWNLOAD LINK ABOVE)
Switch off your phone
Open device manager
Connect your phone in OFF state
There will be a device named "mt65xx preloader" which will be there for some seconds.
You need to be quick at this. As soon as it is displayed, right click and click update driver.
Browse manually the files given above
THIS WILL NOT WORK ON WINDOWS 8, SO FOLLOW THIS:
Download files from above link
Hover pointer to Top Right corner of your screen, choose Settings from sidebar
Click last option "Change PC Settings"
Select "General"
Scroll to end and find "Restart Now" under "Advanced Startup". PC Will be in troubleshoot mode now
Once screen is back, select option "Troubleshoot"
Select "Advanced Options"
Select "Startup Settings"
Select "Restart"
Now important step. There will be several options to select from. You need to select "Option 7". For this press "7" key from number pad.
After your PC starts, follow above steps.
2. MAKE A NEW FOLDER AND EXTRACT THE FILE MMX_SYSTEM_880.RAR USING WINRAR OR ANY OTHER ON NEW FOLDER.( WHICH WAS DOWNLOADED FROM ABOVE LINK)
3. NOW OPEN SP FLASH TOOL ( WHICH WAS DOWNLOADED FROM ABOVE LINK )
4. CLICK ON SCATTER LOADING AND BROWSE TO NEW FOLDER ( IN STEP 2) AND SELECT MT6589_ANDROID_SCATTER_EMMC.TXT
5. CLICK ON FORMAT AND SELECT FORMAT WHOLE FLASH AND CHECK VALIDATION AND CLICK OK
6. NOW CONNECT UR CELL ( WITHOUT BATTERY) IT WILL SHOW DARK GREEN AFTER UR CELL FORMATTED.
7. NOW REMOVE UR CELL FROM PC.
8. NOW CLICK ON DOWNLOAD IN SP FLASH TOOL and SELECT YES.
9. CONNECT UR CELL (WITHOUT BATTERY) AND CLICK ON DOWNLAOD TO COMPLETE THE PROCESS (MAKE SURE U INSTALLED DRIVER PROPERLY). DON'T INTERRUPT THE PROCESS .
10. AFTER FINISH FLASHING GREEN CIRCLE WILL SHOW.
11. NOW REMOVE UR CELL.
12. GO TO RECOVERY BY PRESSING VOLUME( -) WITH VOLUME ( + ) AND PRESS POWER KEY
13. SELECT RECOVERY MODE BY PRESSING POWER KEY
14. AGAIN 3 OPTION WILL SHOW SELECT 1 (RECOVERY )
15. NOW U CAN GO TO CWM AND FLASH UR CUSTOM OR STOCK ROM ( DON'T RESTORE UR ANY BACKUPED ROM )
16. NOW REBOOT AFTER INSTALLATION AND ENJOY UR ROM WITH INCREASES SYSTEM PARTITION UPTO 880MB...
17. IF ANYONE GOT INVALID IMEI USE (IMPORTANT STEPS TO FOLLOW STEP FROM ABOVE) OR MTK DOID TOOL.
18. NOW ENJOY.....
IMPORTANT LINKS ​1) Make Your Own Imei Patch : http://forum.xda-developers.com/micromax-canvas-2/general/guide-make-imei-patch-t2649354
2) Download this Stock V1 rooted apps with removed all firmware and install it : http://d-h.st/mZO
3) http://forum.xda-developers.com/mic...permanent-solution-imei-t2579994/post48715948
AM NOT RESPONSIBLE OF ANY MOBILE DAMAGED OR ANY WAR BEGIN....​

RESERVED

Thank u, Thank u so much BRO for this thread. I will try this as soon as i get to my P.C

Please Help me, phone not booting the ROM, or Recovery Mode. I did all the steps correctly. The green circle also came up, but Phone not booting.

after donwload process over u have to go into recovery mode then flash any rom then ur phone will boot
Sent from my A110Q using XDA Premium 4 mobile app

i Tried this procedure
After formatting when i started re plugged d device n clicked on download & its searchng device after dat it detected device as Single Port Use instead of Vcom driver
& i stuck at 100% downloading in red bar for 30mins i left still is same no response at all.....
Device Soft Bricked Can Sumone help me where i got wronggg
I checked my CanvasHD whether Drivers are Correct its working fine
CanvasHD detecting as Vcom [ com7 ] but
Canvas 2plus detecting as Single port [ com7 ]
HELP NEEDED PLZZZZZZZZZ

@djkrish5610 this process woking ,u need to check wether the preloader driver u installed the one which is on download no. 3
Sent from my Nexus 4 using XDA Premium 4 mobile app

Hi Manish,
Thanks for the method can you guide as to how you created re partition file in the first place ? I would like to replicate this for my MTK6577 phone, guess your file will not work since it is MMx specific. Thanks

vijayar said:
Hi Manish,
Thanks for the method can you guide as to how you created re partition file in the first place ? I would like to replicate this for my MTK6577 phone, guess your file will not work since it is MMx specific. Thanks
Click to expand...
Click to collapse
provide me ur stock rom link and which cell u using
Sent from my Nexus 4 using XDA Premium 4 mobile app

[email protected] said:
provide me ur stock rom link and which cell u using
Sent from my Nexus 4 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Just replied in Yuweng's main MTk65xx Porting TUT Thread...Thanks again ....
http://forum.xda-developers.com/showpost.php?p=49106086&postcount=1410

Please Help...
I tried this procedure
After formatting, I clicked on download & plugged in the device. It remained stuck at 100% downloading with red for sometime and then opened a window with some error suggesting pressing some key combination and to look at error log.
I am stuck, please help...
BTW my phone had ..._MMX_16_flasher_user as build number. I believe it stock ROM v2 and this method is meant for on my phone.

@[email protected] if you don't mind would you please post a video doing it. I really want to try out the Color OS on Canvas 2 plus.

Will this work on Canvas HD A116 MT6589…… running Stock AOSP 4.2.1 JB..
or i have to replace the Userdata, sec_ro, recovery, boot.img, uboot, etc of my stock ROM....
Or just by flashing those EBR1 & EBR2 files will work....
Plz reply...

OP, please inform members to take backup of their MAC IDs and Bar code as well. After formatting with SP Flash tool, all their MAC IDs and Bar code would be erased as well. but I guess you have forgotten to mention anything about MAC IDs and bar code.

nice_guy75 said:
OP, please inform members to take backup of their MAC IDs and Bar code as well. After formatting with SP Flash tool, all their MAC IDs and Bar code would be erased as well. but I guess you have forgotten to mention anything about MAC IDs and bar code.
Click to expand...
Click to collapse
Thanks for ur remember i will edit the thread tommorrow
Sent from my A110Q using XDA Premium 4 mobile app

How to restore BARCODE...???
And will this thread work on Canvas HA A116
Sent from my Micromax A116 using XDA Premium 4 mobile app

rkharat98 said:
How to restore BARCODE...???
And will this thread work on Canvas HA A116
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
It will nt work on ur device
Sent from my A110Q using XDA Premium 4 mobile app

[email protected] said:
It will nt work on ur device
Sent from my A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Why ??? I mean.. Can u make this thing work on A116...
Plz
Sent from my Micromax A116 using XDA Premium 4 mobile app

rkharat98 said:
Why ??? I mean.. Can u make this thing work on A116...
Plz
Sent from my Micromax A116 using XDA Premium 4 mobile app
Click to expand...
Click to collapse
make a zip of A116 stock rom (sp tool) of all file except android.img and give me i will post this for a116
Sent from my A110Q using XDA Premium 4 mobile app

[email protected] said:
make a zip of A116 stock rom (sp tool) of all file except android.img and give me i will post this for a116
Sent from my A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Okay.. I wil do it...
Sent from my Micromax A116 using XDA Premium 4 mobile app
---------- Post added at 08:16 AM ---------- Previous post was at 07:18 AM ----------
[email protected] said:
make a zip of A116 stock rom (sp tool) of all file except android.img and give me i will post this for a116
Sent from my A110Q using XDA Premium 4 mobile app
Click to expand...
Click to collapse
Yes..
https://docs.google.com/file/d/0B7B3CRNZZhiQZVNRbUFodW12VHc/edit?usp=docslist_api
This is it.. No system.img included...
Sent from my Micromax A116 using XDA Premium 4 mobile app

XOLO Q3000 – ALL IN ONE INDEX – Development, root, ,Custom Roms

XOLO Q3000 – ALL IN ONE INDEX – Development, root, ,Custom Roms
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Specifications:-http://www.gsmarena.com/xolo_q3000-5927.php
http://www.fonearena.com/xolo-q3000_4374.html
Reviews:-
The XOLO Q3000 features looks good(http://www.gogi.in/xolo-q3000-review.html)
Overall, the Xolo Q3000 is one of the best large-screen phones with a full HD screen in the Indian market so far.http://www.fonearena.com/blog/94194/xolo-q3000-review.html)
We are pretty impressed by the Xolo Q3000
(http://timesofindia.indiatimes.com/...ew-The-big-big-phone/articleshow/29440196.cms)
The display of Q3000 offers good viewing angles. decent battery back up, can easily play HD video content http://www.themobileindian.com/reviews/993_Mobile-Review-Xolo-Q3000
News –
Xolo Confirms Android 4.4 KitKat Update for Q700S, Q1010i, Q1010 and Q3000 http://gadgets.ndtv.com/mobiles/news/xolo-confirms-android-44-kitkat-update-for-q700s-q1010i-q1010-and-q3000-524307
XOLO to release Android 4.4 update for Q700S, Q1010i, Q1010 & Q3000 http://www.androidos.in/2014/05/xolo-release-android-4-4-update-q700s-q1010i-q1010-q3000/
ON BEHALF OF Q 3000 USERS, I SINCERELY THANK Dr. Avinash Shewale for taking strain in compiling and sending all to me. All credit goes to him.
This thread includes
Rooting methods
Recovery – stock, CWM, Carliv Touch
Original firmware – SP tool flashable – for unbricking
Custom Roms and Mods
Accessories available – screen guards, back & flip cases.
HOW TO ROOT YOUR PHONE:
Root
There are plenty of threads on this forum for rooting MTK6589 devices.
Xolo itself provided app for rooting called xoloroot. U can use it. (warranty will be void if u root by this method)
Framaroot http://forum.xda-developers.com/apps/framaroot/root-framaroot-one-click-apk-to-root-t2130276
By far the easiest method of all.
Just download the framaroot.apk from here http://forum.xda-developers.com/attachment.php?attachmentid=2734026&d=1399630277
Install, root and reboot. If release above 1.9.1 availabe you can use that also.
To be sure your use Barahir exploit which is trouble free.
Done.
( U may need MTK6589 usb drivers: http://forum.xda-developers.com/attachment.php?attachmentid=2107980&d=1373524210
or
http://www.mediafire.com/download.php?vb4i1qodr8c8mk4
If at all this metod don’t work for u just follow links and root ur devices.
http://forum.xda-developers.com/showthread.php?t=2247537
http://www.gizbeat.com/2151/graphical-root-mtk6592-mtk6582-mtk6589-mtk6577-mtk6575/
Recovery
U need to install custom recovery for installing custom roms, taking backup.
First download provided recovery of ur choice and follow one of the following metohds.
Flashify (https://play.google.com/store/apps/details?id=com.cgollner.flashify)
How to use - http://forum.xda-developers.com/showthread.php?t=2584938
Using Sp flash tools
Requirements:
1. Sp Flash Tool
2. Recovery.img
3. MT6589_Android_scatter_emmc.txt (only use this one. it is modified.)
Very Easy & safe way to FLASH CWM RECOVERY Without having PC
steps:->
1. Install drivers for your phone
2. Copy recovery.img and scatter file in new same folder
3. Extract and open the SP Flash Tools.
4. In SP Flash Tools, click on Scatter-Loading and the program will ask you the location of the scatter loading file for your device select mt6589 scatter file.txt
5.Check only recovery.img, uncheck all others. (will be checked auto)
6. Switch off your phone (Remove the battery to make sure it is switched off).
7. Click the Download option (present on the right of Firmware
> Upgrade option) and the flash tool will start looking for your phone.
8. Put Battery and Connect usb to your phone now. The Flash Tool will start the flashing process, the progress of which can be viewed from a yellow progress bar at the bottom of the flash tool.
Warning 1 - Don't interrupt this process as it can potentially brick your device.
Warning 2 - Make sure no power interruption takes place. (Use a laptop to ensure this).
9. After the process completes, a green ring will appear on your device signalling that the process was successful.
10.Disconnect your phone.
Using Mobile uncle tool
1. Downlaod CWM Recovery extract it and copy recovery.img only to root of your SD Cards
{ i.e. sdcard/recovery.img or sdcard2/recovery.img }
2: download Mobile Uncle Tools for MTK http://d-h.st/yco and install it as normal apps
3. Now open Mobile Uncle Tools apps you recently installed.
4. grant Superuser permissions
5. There click on recovery update menu
6. Then click on the recovery image name of ‘ recovery.img ’
7. Let the app install the recovery. After that apps ask you for reboot your device in to recovery?. press yes
Switch off phone. Press volume Up and Power same time to get in to CWM.
Stock firmware
This method is useful for warranty purposes and also for UNBRICKING !!!!
Also u can enjoy ur stock rom.
Requirements
Sp flash tools (http://d-h.st/KyK)
Flash files https://docs.google.com/uc?id=0B6xlBPoXgsR3MzhhRHRlWXdFdVk
Procedure - http://forum.xda-developers.com/showthread.php?t=2167244
CUSTOM ROMS
U need to go in recovery for flashing custom rom
It is always better to make a backup of current rom before flashing any custom rom as in case anything wrong happens u can easily go back to previous rom.
Also u shud backup ur data (contacts, massages, app data) in case anything wrong happens.
Guide to use CWM
http://forum.xda-developers.com/showthread.php?t=2166772
http://forum.xda-developers.com/showthread.php?t=2192976
THE CARLIV TOUCH RECOVERY :
The touch recovery , stock boot and CWM recovery extracted from the phone is available in the url below.
http://forum.xda-developers.com/showthread.php?t=2725881
CUSTOMIZED ROOTED STOCK ROM FOR XOLO Q3000
http://forum.xda-developers.com/showthread.php?t=2725881
X0LO Q3000 STOCK BASED MIUI i
http://forum.xda-developers.com/showthread.php?t=2725881
MIUI 4.4 based Custom Rom
http://forum.xda-developers.com/show....php?t=2725881
http://forum.xda-developers.com/show....php?t=2743926
Zopo 4.4.4 miui glitters XOLO Q3000
http://forum.xda-developers.com/showthread.php?t=2743926
4.4 Kit Kate WammyZ ROM for XOLO Q 3000
http://forum.xda-developers.com/showthread.php?t=2742702
Improved KITKAT with Enhanced Audio and Video etc.
http://forum.xda-developers.com/showthread.php?t=2742702&page=2
TO INCREASE THE INTERNAL PHONE STORAGE TO 1.93 GB or to 2.46 GB or to 2. 7 GB or 7 GB size.
http://forum.xda-developers.com/showthread.php?t=2742702&page=2
Accessories available screen guards, back & flip cases.
I am including this part because its difficult to get accessories for these indian companies.
It will help the users to get it easily.
Right now
Screen guards and back cases available for the phone.
I havnt seen any flip case(If u know please post here)
View attachment 2746542

thanks a ton
thanks lot for all the utilities and tricks for our xolo q3000
we hope to see more n more custom roms with updates and change logs as per requirements and all

puduraja said:
Right now
Screen guards and back cases available for the phone.
I havnt seen any flip case(If u know please post here)
View attachment 2746542
Click to expand...
Click to collapse
Can you please post the link to the accessories? Thanks.

Vineet3 said:
Can you please post the link to the accessories? Thanks.
Click to expand...
Click to collapse
Goto ebay.in and search xolo q3000 u will get it
Very nice thread.
Any progress on MIUI rom internal storage???

I have ported it. You can increase your storage up to 7 gnome
Follow the steps.
Please refer to kit Kat whammy portal or else I shall port it again in the MIUI so that it becomes easy for those users.
As from mobile I am responding please wait for couple of hours
Sent from my Spice Mi-535 using XDA Free mobile app

In crease your internal storage to 1.93 oor 2.46 or 2.7 or 7 GB in XOLO Q 3000
avi3230 said:
Goto ebay.in and search xolo q3000 u will get it
Very nice thread.
Any progress on MIUI rom internal storage???
Click to expand...
Click to collapse
Hallao Sir,
See the thread below.
http://forum.xda-developers.com/show...2742702&page=2
It has very viidly narrated there.
You can increase the storage to 1.92 or 2.46 or 2.7 or 7 GB according to your use. It is not satraight forward.
For a trouble free installation, i have given all the required files to flash through smart phone flash tool.
I have suggested to flash using the stock ROM with stock boot.img and stock recovery.img. Then change it to custom recovery and then flash the CWM based any custom rom.
You try it if you feel any difficulty please come back here. It is almost 15 days or so over and so far no difficulties reported.
You may be knowing how to use the smart phone tool flash. I am preparing CWM based one and will port soon.
Enjoy

is Xolo Q3000 worth it?
Vineet3 said:
Can you please post the link to the accessories?...
Click to expand...
Click to collapse
i'm thinking about a device upgrade from my Micromax A116 Canvas HD. what is the next best device?
is Xolo Q3000 worth it? it is one device that comes close to the specs that interest me:Dual-SIM
USB OTG (and MHL, if possible)
Long lasting (large capacity) battery
Large display (preferably 6")
Large-size internal memory (min 8 GB)
Minimum 2 GB RAM
No (or not much) proprietary stuff (as Vanilla-Android as possible)
HSDPA, 42 Mbps, HSUPA, 11.5 Mbps
KitKat 4.4.2
Micro SD-Card support
Sensors: Accelerometer, gyro, proximity, compass​ specs comparison:
request some owner of a non-customised Xolo Q3000 to post screenshots of all the pages/windows of apps drawer of the untouched stock rom. i'd like to see the apps that come bundled on the fresh device. thanks.
will Xolo Q3000 get an official KitKat 4.4.2 upgrade?
@puduraja, your valuable opinion on all the above please.

to increase storage in MUI phone or any custom rom of XOLO Q3000
avi3230 said:
Goto ebay.in and search xolo q3000 u will get it
Very nice thread.
Any progress on MIUI rom internal storage???
Click to expand...
Click to collapse
Dear Sir,
I am providing you the url where the procedure is available to increase phone internal storage, I just copied what ever there and also posted below for your ease.
The url is :http://forum.xda-developers.com/showthread.php?t=2742702&page=2
Try this and you can slo get the other ports and discussion there on.
I am pasting the page which pertains to increasing the internal storage only.
Dear XOLO Q3000 friends,
I am porting today some files to increase the internal phone storage to 1.93 GB or to 2.46 GB or to 2. 7 GB or 7 GB size. There are many short cuts also. But to be on the safe side and trouble free one, I am providing with the smartphone tool to install the stock rom and respective files loaded in the same stock rom.
I have also provided the Carliv Touch recovery that you can change afterwards. We can flash the Carliv touch recovery in the first go. It is advisable to opt for stock recovery flash first.
Please download the Smart Phone Flash Tool SP_Flash_Tool_v3.1328.0.183a provided here. You can also use the your own SPFT that you have been using to handle your Q 3000.
If you have not installed the drivers, to ease your process I am providing the driver files also. In all there are 8 drivers and please try to install all the 8 drivers.
Please down load the base ROM file that is provided in the .7z format file and down load it , open it and take to your desk top where you might already have your SPFT tool also.
Click opens the flash tool .exe file and waits for the tool to open up.
Then click the Scatter file and take your curser the scatter file provided in the XOLO_Q3000_S003_15102013
This wll automatically open all the required files for the successful flash of the rom, the stock boot, stock recovery, stock EBR1 and EBR2 (EBRo and EBR2o in my folder) will be loaded.
Now chose your storage requirement, 193,246 or 273 or 7z which corresponds to 1.93, 2.46, 2.73 and 7 GB internal space. Both and respective EBR1 and EBR2 has to loaded and please take care.
After loading either you click Firmware upgrade or download to flash the rom.
Please note while uploading the SPTF stock Rom 2.73 GB ebr was not loaded and it is given here and take it and use as you please.
Wait for the yellow bar to pass and green circle to pop up.
Enjoy the increase storage.
Down load the file from the url below:
https://drive.google.com/file/d/0B_V...it?usp=sharing
2.7gb.7z
SP_Flash_Tool_v3.1328.0.183a.7z
xolo Drivers.7z
Driverxolo.tar
Once you flash this rom with the storage you chose. next step is to change the recovery to the CARLIV touch one, which is provided inside the flah rom. After flashing this as usual you can flash the custom rom which ever you want. It is advisable to reboot twice or thrice with the gap of 2 minutes and carryout your operation.
Please note when i flashed the 7 gb partician the secong imei was notg shown and after 2 reboots the sim worked. May be for other roms it may happen. Also it is advisable to format factory data reset using the phone settings to confirm your storage capacity.
Please write here for any problems or difficulties I shall try to provide if feasible the solutions.

m0han said:
i'm thinking about a device upgrade from my Micromax A116 Canvas HD. what is the next best device?
is Xolo Q3000 worth it? it is one device that comes close to the specs that interest me:Dual-SIM
USB OTG (and MHL, if possible)
Long lasting (large capacity) battery
Large display (preferably 6")
Large-size internal memory (min 8 GB)
Minimum 2 GB RAM
No (or not much) proprietary stuff (as Vanilla-Android as possible)
HSDPA, 42 Mbps, HSUPA, 11.5 Mbps
KitKat 4.4.2
Micro SD-Card support
Sensors: Accelerometer, gyro, proximity, compass​ specs comparison:
request some owner of a non-customised Xolo Q3000 to post screenshots of all the pages/windows of apps drawer of the untouched stock rom. i'd like to see the apps that come bundled on the fresh device. thanks.
will Xolo Q3000 get an official KitKat 4.4.2 upgrade?
@puduraja, your valuable opinion on all the above please.
Click to expand...
Click to collapse
Junst now I have seen your post. I can switch over to the latest stock rom available from the xolo web site port it in give you the details. Please wait. in the mean time our friends can give some in sight. I am not perfect to answer your all doubts. I am also learning like others.

m0han said:
i'm thinking about a device upgrade from my Micromax A116 Canvas HD. what is the next best device?
request some owner of a non-customised Xolo Q3000 to post screenshots of all the pages/windows of apps drawer of the untouched stock rom. i'd like to see the apps that come bundled on the fresh device. thanks.
will Xolo Q3000 get an official KitKat 4.4.2 upgrade?
@puduraja, your valuable opinion on all the above please.
Click to expand...
Click to collapse
Just go through http://www.gogi.in/xolo-q3000-review.html
see the video too.
U will get all details of stock rom as well.
As per kitkat is concern see the links in OP mentioning about it.

avi3230 said:
http://www.gogi.in/xolo-q3000-review.html
Click to expand...
Click to collapse
that's there in the op as well. my bad.

problem with rooting
Hey i have a problem with my xolo q3000... I am not able to root it..when i first brought it from the market i rooted it with framaroot and it was successful.. Just few days back my phone was bricked and i was not able to even the recovery menu... I gave my phone to the local repairing shop and he made it work again...Now the problem is when i try to root the phone with framaroot it displays a message " Your phone does not seem to be vulnerable to the exploit included in framaroot" .... Please tell me how should i root my phone or should i just flash the stock rom included in this thread by you... Will i be able to root the phone if i flash the stock rom? I checked the build number it is different from the one when i brought the phone.. Plz help.......

mhp1995 said:
....I checked the build number it is different from the one when i brought the phone...
Click to expand...
Click to collapse
please post the current build no. and, the original too, if you still know it.
at least, is the current build no. newer or older? also, check the following:
carliv said:
....There are multiple methods to root your phone....
A. The best rooting application at the moment (in my opinion), is Framaroot.apk, developed by alephzain....
B. For rooting with a software from PC, I know three big candidates: oneclickroot, kingoroot and srsroot.....
C. Rooting zip archives are two, to choose from: chainfire's and koush's.....
Click to expand...
Click to collapse
that guide is pretty enlightening.

m0han said:
please post the current build no. and, the original too, if you still know it.
at least, is the current build no. newer or older? also, check the following:
that guide is pretty enlightening.
Click to expand...
Click to collapse
Previous build number was: XOLO_Q3000_S011_25022014
Current build no: XOLO_Q3000_S003_15102013

Recovery
@puduraja @avi3230 @m0han can you please upload or attach the zip/image file of whatever working recoveries you guys can?
The issue here is, I've been trying to install the OTA update, but the recovery doesn't let me. So I'm gonna try it via some other recovery.
Please help me in whatever way you can, I'd be very thankful.

Vineet3 said:
@puduraja @avi3230 @m0han can you please upload or attach the zip/image file of whatever working recoveries you guys can?
The issue here is, I've been trying to install the OTA update, but the recovery doesn't let me. So I'm gonna try it via some other recovery.
Please help me in whatever way you can, I'd be very thankful.
Click to expand...
Click to collapse
First off all after bricking your phone have u tried flashing ur phone using flash tools???
Cause if ur build number reduced to older one cause ur local person flashed it with flash files available
https://docs.google.com/uc?id=0B6xlBPoXgsR3MzhhRHRlWXdFdVk
Better u download this and sp flash tools and learn the procedure.
Second thing how u getting OTA update??
My build number is same as urs (I flashed it thrice or more)
If u download any update please upload it .
Currently i am using
Recovery CTR v2.2
other recoveries u can try
Recovery CTR v2.4
Recover CWM6
http://www.mediafire.com/download/77dqvtw0warvsu4/recovery-cwm6015-A5.7.rar
Recovery TWRP v2.6.3.0
https://mega.co.nz/#!9YYklIYR!YE-nsnyBmkGRVelCnOSG-twuo82OQl0tfYHjvZkjuv4
Recovery Philz v6.27.4 / v6.41.5
https://mega.co.nz/#!FUQFhbQJ!wCM7jZuHtw8UfTFSUI0PTyEpOubkNOSkzc1bWI-IvW0
https://mega.co.nz/#!gEIVGYja!LtuC6HubsT3LOOzsHkTFI_cUoSAmPBn4vuiK7FRYBLU
https://mega.co.nz/#!kZoU0KTS!Te9nyCLVVgfMqJ2xIKLExb8iQ0-EVgU-6whq40YGjp8 (with aroma file manager.)
I faced the same issue twice after flashing.
Only thing that worked is flashing recovery using sp flash tools.
http://phtechbook.blogspot.in/2014/06/how-to-flash-stock-custom-recovery-sp-flash-tool.html

I was able to root my phone with a software (VROOT)... I backed up my device with MTKdroid Tools and i tried to create recovery using mtkdroid tools...it was successfully imported in my phone my when i rebooted from my recovery menu a message on MTKDroidtools appeared saying that " File/system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode is found!" ... Can someone help...thanks in advance...

avi3230 said:
.....if ur build number reduced to older one cause ur local person flashed it....
Click to expand...
Click to collapse
that post was here.
Vineet3 said:
.... install the OTA update....?
Click to expand...
Click to collapse
update available? any version no.? the only recovery working for me up till now is here. installed that using mobileuncletools.

The OTA update changelog says it's a fix for contacts app and the facebook app. I have been facing the contacts bug, so I know of it. But haven't ever used the facebook app on this phone, so don't know about it.
And thanks for the links, guys. I can flash the recovery via Flashify app, right?
Sent from my Q3000 using XDA Premium 4 mobile app

mhp1995 said:
....." File/system/recovery-from-boot.p which restore factory recovery in case of phone switching on in a normal mode is found!"...
Click to expand...
Click to collapse
read this post. you'd do well to read the whole thread. i repeat.
m0han said:
that guide is pretty enlightening.
Click to expand...
Click to collapse
.
---------- Post added at 04:25 PM ---------- Previous post was at 04:24 PM ----------
Vineet3 said:
....I have been facing the contacts bug, so I know of it. ....
Click to expand...
Click to collapse
could you explain about the bug?

Rooting And CWM Micromax Canvas Fire A093

Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM​
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Procedure to Root Micromax Canvas Fire A093​Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:

When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app

NikS Vv said:
When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app
Click to expand...
Click to collapse
Same here what to do ?????

dude just tell me did you test this method?? i tried same method like this on 093 which was made for fire104 n my devices was bricked..so just tell me you tried it or you just copy paste old post?
---------- Post added at 04:32 PM ---------- Previous post was at 04:25 PM ----------
or just make a video for it if you can.thanx

Thnks. Working.
But flash kinguser for proper root access, not supersu.
---------- Post added at 10:53 PM ---------- Previous post was at 10:45 PM ----------
NikS Vv said:
When I Click on the download button to start flashing , nothing happens .... progress bar remains at 0% .. Y so BuDDy ?? plz tell me !!
Sent from my Nokia_X using XDA Free mobile app
Click to expand...
Click to collapse
Neelabhushan said:
Same here what to do ?????
Click to expand...
Click to collapse
First Install Vcom driver.
Then do not connect phone to pc first.
Do as mention and then click Download botton. Now connect ur phone ( switched off) to pc and flashing will start in a few seconds.

incorrect scater file
its saying incorrect scater file n also now scater file download link is not working.any suggestions???

Problem in deive connecting
hello i have downloaded all software and i have installed driver but when i switch off my mobile and then connect cable than connecting sound heard twice that means device connected than disconnected please tell me how to connect device properly

I try same but when i click on download and connect mobile in switch off button nothing will happen....
Pls help me to root my mobile
Sent from my Micromax A093 using XDA Free mobile app

Good work bro...hehe...batayabyi nehin!

:laugh:
daoodshah said:
Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM​
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
Procedure to Root Micromax Canvas Fire A093​Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:
Click to expand...
Click to collapse
Thnx bhai

Can't install cwm
i have installed the driver, the device is recognized as mediatec com port 6 under ports. after selecting the files pressing download most times i get errors and the other times the bar is stuck at 100%. plus every second the phone connects and disconnects. tried formatting, tried pressing up/down/both volume buttons while connecting the phone to pc after pressing download. first time rooting a micromax phone need some help

Error
daoodshah said:
Here is a guide to root Micromax A093
Here's a 100% working method of rooting Micromax Canvas A093. I bought this phone today and after a few hit & trials found out that this is the only method to root this amazing device. Framaroot, Binary Tools and SRS Root did not work. This method is not as quick as Framaroot and it requires a PC but it's quite simple.
First of all you will need These So download one by one...
1-Boot And Recovery
2-Mediatek Usb Vcom Drivers
3-SP Flash tool
4-Super Su 1.9.4
5-Scatter File
Installing CWM​
Once you have downloaded the entire above listed files to your PC, copy SuperSU file to the Root of your device’s SD card or internal storage. Just make sure to not to copy inside any folder.
Power off Micromax Canvas Fire A093, and while it is turned off connect it to PC via OEM USB Data cable.
Extract the contents of SP Flash tool, to a folder and run Flash_Tool.exe administrator.
Now the SP Flash Tool opens, just click on Scatter-loading and load the scatter file which you have downloaded from the above links. It is named as “MT6582_Android_scatter_emmc.txt”.
Now you will see series of check boxes in the region below in the SP Flash Tool.
Among them Check BOOTIMG and RECOVERY, now click on respective names and choose the boot.img and recovery.img files from the package you downloaded.
Click on Download button at the Top or press F9 to start flashing CWM Recovery on Micromax Canvas Fire A093.
Procedure to Root Micromax Canvas Fire A093​Download the SuperSU package from the above links and copy it to the Root of your device’s SD card or your device’s internal storage.
Make sure to not to copy inside any folder.
Power off Micromax Canvas Canvas Fire A093.
Enter into CWM Recovery or Recovery Mode. To do so press and hold Volume up + Volume Down + Power button simultaneously, now select the recovery mode.
Once you are in CWM Recovery select the option to install zip from SD card and choose the SuperSU zip file and install or flash it.
Once done, ++++Go Back++++ and select reboot system now, this will boot your device into normal mode.
Once the device boots up you are ready to enjoy the Root access on your Micromax Canvas Fire A093.
Look for SuperSU app in app drawer.
If you want to confirm whether your device is successfully Rooted or not, then you can make use of Root Checker App.
That’s all now you have successfully installed CWM Recovery and Rooted Micromax Canvas Fire A093. Do let us know in the comment section if you face any issues while trying to install CWM Recovery and Root Micromax Canvas Fire A093
:good:
Click to expand...
Click to collapse
It says PMT changed for the device??

aayush.mainali said:
It says PMT changed for the device??
Click to expand...
Click to collapse
I also got the same error.