Database Info

Root and CWM for byond mi book mi3-xda(added new theme)(20.02.2013)

I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment ADB.rar
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment CWM.zip.zip ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Now I'm uploading the ROM DUMP.
If anything goes wrong with your device through this you can restore it to stock.
and one more thing i have included the Root access with this ROM DUMP.
if you want to Unroot it just go through the Rooting process and select Unroot.
here is the link -
http://www.sendspace.com/file/asmmv9
steps -
1.after downloading the above zip extract it.
2.you will get a folder called "clockworkmod' now place it to your inbuilt sdcard.
3.boot into recovery mod and flash the CWM zip for mi3 tab.
4.now make a data wipe and clear cache.
5.now go to backup and restore and restore it.
now you are done........
------------------------------------------------------------------------------------------------------------------------------------------------------------
FOR THEMING VISIT MY NEW THREAD-
http://forum.xda-developers.com/showthread.php?p=38216978#post38216978
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============

Review plzz
Hey can u plz provide a review of this tab with benchmark scores and all??

ChiragK said:
Hey can u plz provide a review of this tab with benchmark scores and all??
Click to expand...
Click to collapse
@Chirag:
ya sure...
tomorrow i will post it...with all benchmark scores...
I'm using it for more than a week...and i can suggest you one thing it's really very good product according to the price ...

@ Chirag:
SaM-RoN said:
@Chirag:
ya sure...
tomorrow i will post it...with all benchmark scores...
I'm using it for more than a week...and i can suggest you one thing it's really very good product according to the price ...
Click to expand...
Click to collapse
here it is....just bellow I'm providing all the benchmark scores with SS....you can give a look into it... :angel:
i think it will be help-full for you....
and please don't get confused with the colors of those SS...it's showing swapped because of the screen shoot app i have used. .....
every thing is working perfectly with this device....and display quality is really very good.. :good:
only the camera quality is not very good for indoor photography...
and i want to mention one more thing about the betray,if you play games continuously for more than 2 hours then you should carry the charger with you....

SaM-RoN said:
here it is....just bellow I'm providing all the benchmark scores with SS....you can give a look into it... :angel:
i think it will be help-full for you....
and please don't get confused with the colors of those SS...it's showing swapped because of the screen shoot app i have used. .....
every thing is working perfectly with this device....and display quality is really very good.. :good:
only the camera quality is not very good for indoor photography...
and i want to mention one more thing about the betray,if you play games continuously for more than 2 hours then you should carry the charger with you....
Click to expand...
Click to collapse
i bought it too .. its really nice :good:

ChiragK said:
i bought it too .. its really nice :good:
Click to expand...
Click to collapse
I'm really very glad to help you...
and I'm sure that you will enjoy it a lot .... :highfive:

Any methods for Mi-book MI2?
SaM-RoN said:
I'm really very glad to help you...
and I'm sure that you will enjoy it a lot .... :highfive:
Click to expand...
Click to collapse
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?

sabergeek said:
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?
Click to expand...
Click to collapse
you can try with this same process.....surely this process will work with MI2 as-well....i haven't tried yet....
try to do it.....if any error occurred then please let me know.

Nice
Thank you.
I rooted my mi3 tab successfully with this method.
I read someplace that our mi3 contains Allwinner A10 processor
Now there is a jellybean rom [CM10 4.1.1] available for tablets with this processor.
But a compatibility pack is required to be flashed for the touchscreen to work after flashin this rom.
Can this rom be installed? Can any developer please try this and confirm?
http://forum.xda-developers.com/showthread.php?t=1821398

djsanta said:
Thank you.
I rooted my mi3 tab successfully with this method.
I read someplace that our mi3 contains Allwinner A10 processor
Now there is a jellybean rom [CM10 4.1.1] available for tablets with this processor.
But a compatibility pack is required to be flashed for the touchscreen to work after flashin this rom.
Can this rom be installed? Can any developer please try this and confirm?
http://forum.xda-developers.com/showthread.php?t=1821398
Click to expand...
Click to collapse
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. visit www.dark.com.tr to see the original tab. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.

sabergeek said:
Hi, it's good to know that there's way too root mibook tablets. Does this apply to other mibook tablets too? If not, can you help me with rooting and finding the right ROM for MI2?
Click to expand...
Click to collapse
Yes. This method is applicable for MI 1/2/3/5 etc tablets. you can try it without any fear. just be sure that you have the right drivers installed. drivers for your tab will get installed the moment you plug it in you PC. If it dosen't install pdanet app on your phone and on ur PC and connect your tab to the PC. Run pdanet...it will automatically install the correct drivers for your tab.

Dengabhi said:
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.
Click to expand...
Click to collapse
Thank u.
If not for your post I would have probably flashed an allwinner rom and bricked my tab.

exactly you are right.

SaM-RoN said:
I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment 1484720
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment 1630706 ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============
Click to expand...
Click to collapse
MY FRIEND : Check my post for credits. Also included ROM Dump.

Dengabhi said:
MY FRIEND : Check my post for credits. Also included ROM Dump.
Click to expand...
Click to collapse
yap,its ok......now we should try for some customization....

I have an T7000!
Dengabhi said:
mibook mi3 is not based on allwinner chip. it has a telechip TCC 892x processor. its a rebranded turkish product called Dark Evopad T7000. visit "URL" to see the original tab. dont attempt to flash allwinner based ROM....u will brick your tablet. you may install CWm recovery for this tab. search for my post for details.
Click to expand...
Click to collapse
hey,i have an t7000. does mibook m3 and this t7000 is the same device?Because i cant find any roms or cwms for device.Also can i use this cwm on my t7000?
thanks
cizkek_

cizkek_ said:
hey,i have an t7000. does mibook m3 and this t7000 is the same device?Because i cant find any roms or cwms for device.Also can i use this cwm on my t7000?
thanks
cizkek_
Click to expand...
Click to collapse
yes bro those are exactly same device...mod's for mi3 will work on T7000 as well.

thanks!
SaM-RoN said:
yes bro those are exactly same device...mod's for mi3 will work on T7000 as well.
Click to expand...
Click to collapse
Hell yeah. Thank you for your answer. Now i can finally make some modifications (if they re existing )

To root Byond mi book mi10, use this program: http://downloadcdn.betterinstaller.com/installers/9/9/UnlockRoot_downloader_by_UnlockRoot.exe. Link provided by OP. Just posting it here so people like me dont't have to search around!
so thank OP not me.

Mi book mi3 ROM
SaM-RoN said:
I have a rooting tutorial for MI-BOOK MI3 tab,it can be useful for many other device as well...
Just go through the process....
ROOTING
Downloads
1) download the Rooting software from the following link:-
http://www.sendspace.com/file/d92i2b
2) ADB drivers
View attachment 1484720
----------------------------------------------------------------------------------------------------------------------------------------------------------
HOW TO ROOT
1) Now first you have to downloaded the UnlockRoot exe file.Then install it. It will take some time to install."most important thing - disable your antivirus system "
now Close the application after installing it.
2) ADB drivers are required to make sure that your PC can detects your tablet.
extract the "ADB .rar" file and run "adb.exe".it will install your adb drivers..
Make sure you have enabled USB Debugging on your tab. Go to Settings > Developer Options > Turn On USB Debugging.
Now connect it with your computer...AND DON'T TURN ON THE STORAGE MODE..
Rooting:
Now finally open the UnlockRoot application. The interface will look like this.
2)Now click the big green ROOT button and it will ask you that "your device is already rooted.do you want to root it again?" simply click on yes...
now wait for few minutes it will gives you a confirmation ...
And it will shut down your tab.now disconnect it from your computer and turn it on.
Congratulations!! You have Rooted successfully. :highfive:
after that please go to play store and install the busybox. it will help you to enjoy the full benefits of rooting.. :angel:
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Install CWM
steps are bellow -(it will not replace your stock recovery it will run on top of it )
1.Download the CWM zip from here - ( View attachment 1630706 ) and put it on your internal sd-card.
2.Now Power off your device.
3.Hold the volume down and the power on button together.(now you will see a droid pic on your device )
4.Press the volume down button again to see and scroll through the CWM.
(Navigation-through volume down button & Execution-through volume up button)
5.Navigate to "apply update from /nand" and execute it by pressing volume up button.
6.Navigate to CWM zip,and execute it by pressing volume up button.
7.Now you CWM-based Recovery will comes up on your screen.
(Navigation-through volume down and volume up button & Execution-through power button)
:highfive:
here is the Screen Shoot -
Now do one thing first backup your stock rom through "backup and restore" option. :angel:
and then you are ready for customization...
More things are coming soon.. :highfive:
------------------------------------------------------------------------------------------------------------------------------------------------------------
Credits -
1.credits for CWM goes to XDA user Dengabhi.
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
Now I'm uploading the ROM DUMP.
If anything goes wrong with your device through this you can restore it to stock.
and one more thing i have included the Root access with this ROM DUMP.
if you want to Unroot it just go through the Rooting process and select Unroot.
here is the link -
http://www.sendspace.com/file/asmmv9
steps -
1.after downloading the above zip extract it.
2.you will get a folder called "clockworkmod' now place it to your inbuilt sdcard.
3.boot into recovery mod and flash the CWM zip for mi3 tab.
4.now make a data wipe and clear cache.
5.now go to backup and restore and restore it.
now you are done........
------------------------------------------------------------------------------------------------------------------------------------------------------------
FOR THEMING VISIT MY NEW THREAD-
http://forum.xda-developers.com/showthread.php?p=38216978#post38216978
------------------------------------------------------------------------------------------------------------------------------------------------------------
------------------------------------------------------------------------------------------------------------------------------------------------------------
IF YOU LIKE THIS POST, PLEASE HIT THE THANKS......
<<<<<<===============
Click to expand...
Click to collapse
Bro, I was wondering whether u still happen to have that stock ROM for mi3 with you. The links not working, file requested not available, it says.

[ROM][ROOT][CWM] Gionee Dream D1/GN878 - Stock De-odexed ROM with root and busybox

I no longer have this phone (GiONEE Dream_D1), I'm also going to stay away from Mediatek SoCs.
No more support for this device in this thread. If anyone wants to take over, please do. Thanks everyone who participated and encouraged me.
Link to the stock deodexed rom available in post #2 below.
For increasing the internal storage to 2GB from 1 GB, follow the instructions by @RickyGoldsmith here http://forum.xda-developers.com/showpost.php?p=41966897&postcount=3
-------------------------------------------------------------------------------------------------------------------------------------
Stock Factory ROM root instructions:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
YOU ARE DOING THIS AT YOUR OWN RISK.
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1/GN878 will be rooted.
CWM Recovery for Gionee Dream D1/GN878
Steps to install CWM recovery: YOU ARE DOING THIS AT YOUR OWN RISK.
1. Install the MTK USB Drivers for the phone. If you had followed the above steps to root then You have the drivers installed.
2. Download the SP Flash tool, with the scatter file and the recovery.img. Download link here: http://goo.gl/SD9kh
CWM Version 6 available here http://forum.xda-developers.com/showthread.php?p=43039475#post43039475 thanks to @deepak2111
3. Extract the zip file and run the Flash_tool.exe
Leave all the options as default, do not tinker with any settings, except pointing to the correct scatter file.
4. The scatter file and the recovery.img are placed in a folder named DreamD1 in the extracted folder.
In the Flash tool, click on scatter-loading button and select the file named MT6589_Android_scatter_emmc_PMT.txt
The recovery will be auto selected as shown in the image below: DO NOT CHECK ANY OTHER CHECKBOXES.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
5. Click on the Download button. DO NOT CLICK ON Firmware->Upgrade Button, it will brick your Phone
6. Remove the phone from the USB cable
7. Switch off the phone, wait till you feel the vibration. Wait for another 30 seconds
8. Now plug in the phone to the USB cable without turning on the Phone.
As soon as the phone is detected, the recovery image will be installed.
Voila!, Now you phone has CWM recovery installed.
After the recovery installation, remove the phone from the USB Cable.
To go to Recovery Mode: KeepPressing Power + Volume Up Keys. You should now be greeted with CWM recovery menu.
Please HIT the Thanks button if you feel I deserve it.
Note: Just found out that the Chinese Model number for Dream D1 is GN878

Hybrid Stock ROM De-Odexed, Zipaligned rooted with busybox - best of Primo-X1 and Dream D1
Kernel aka boot.img is included in the rom zip as we now have the MTK6589 SoC sources.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/frhv3
Known Bugs:
Selecting Wallpaper from Settings->Display->Wallpaper FCs.
Please let me know, if you come across any bugs here in this thread.
---------------------------------------------------------------------------------------------------------------------------------------------------------------------
GiONEE Dream_D1 Stock deodexed ROM with root and busybox.
Copy the downloaded Zip to External SD Card.
Reboot to CWM Recovery
Do Factory reset.
Flash this using CWM Recovery.
Download Link:: https://copy.com/yRrfRMDNBE4A
MT6589 SoC Kernel source: https://github.com/varunchitre15/MT6589_kernel_source
Credits to varunchitre15 for the kernel sources.

MIUI
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?

somberi said:
I'm also working on porting the CWM recovery to Gionee Dream D1. Once that is completed I shall share it here.
Click to expand...
Click to collapse
waiting for CWM ,have to get rid of this rom,every hd games opens after 10minutes

million thanks
I cant believe my eyes
I am going to root that right now, but first i am going to thank you
Great job and we will wait for your new roms
thanks

RickyGoldsmith said:
How about porting MIUI to start with?
I am already running MIUI Home Launcher and it is a breeze. Do you have any experience with porting ?
I looked at: http://forum.xda-developers.com/showthread.php?t=1827256 and it looks straight forward. What I am not sure is how much these applications depend on the underneath framework.. I mean, If I take all these apk and libraries, will it work on this stock Gionee Dream D1 ROM ?
Click to expand...
Click to collapse
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.

protocolt fault
I am getting the protocol fault, waiting for device.
Any idea the cause for that?

somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...

ashishsoft said:
I am getting the protocol fault, waiting for device.
Any idea the cause for that?
Click to expand...
Click to collapse
Did you install the MediaTek drivers from the link above? Make sure you dont have the phone connected in the PDANet+ (Right click on the System Tray icon and click on disconnect. Also make sure you have USB debug enabled, under Settings->Developer Options.
If all the above fail try restarting the system and try to connect the phone to a different USB port on your computer.
let me know the results.

RickyGoldsmith said:
How do you intend to get the Factory Stock ROM? Rip it from the device?
I am currently trying to play with the CWM process. Will update here how it goes...
Click to expand...
Click to collapse
Currently looking at various Chinese forums to get a proper rom backup tool for MediaTek based devices. Also have contacted Gionee India asking them to release the Factory Stock ROM and the flashtool for the device. Micromax, Lava and many other manufactures give the Stock ROM for download.
At work now and do not have access to any of the resources here..

rooted it
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks

ashishsoft said:
sorry it got that rooted!
yeah!
now waiting for the ROMS
thanks
Click to expand...
Click to collapse
Nice to know

I am your fan somberi
You are a master, !
Great job done and keep that up
:angel:

somberi said:
I would wait for a CWM recovery / Factory Stock rom for Gionee Dream D1, before I start to working on ROM ports. Anyways good to see interest for this device.
Click to expand...
Click to collapse
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.

our stock recovery is useless...pls gv us cwm and unroot.zip too....for safety...
Sent from my Dream_D1 using xda app-developers app
---------- Post added at 01:01 PM ---------- Previous post was at 12:48 PM ----------
somberi said:
Download the zip file named motochopper.zip from the First Post of this thread here: http://forum.xda-developers.com/showthread.php?p=40747604
Thanks and Credits to djrbliss
You are performing this at your OWN RISK!
Instructions:
Extract the entire contents of the zip file.
If you are using Windows, ensure you have installed the latest MediaTek USB drivers available for your phone. Download link for the MediaTek drivers here: http://goo.gl/A7gnp
Ensure USB Debugging mode is enabled on your device.
Connect your device to your PC via USB.
Run run.bat from the extracted folder.
Follow the instructions on screen, when everything is done, the phone will reboot.
Voila! Now your Gionee Dream D1 will be rooted.
Click to expand...
Click to collapse
i hv sucsfuly rooted my dvice...waiting for cwm n unroot...
Sent from my Dream_D1 using xda app-developers app

RickyGoldsmith said:
Are you able to get the boot.img image dump?
MtkTools and others create a file which is just binary data.
Click to expand...
Click to collapse
Could not get time to investigate, too much work.. Will have to spend some time this weekend.

how to install CWM recovery/4ext
hi there
after rooting the device, i have been trying to get in the recovery, i tried using CWM and 4ext both
but everytime i try go to recovery it only shows me default factory mode, that is it. nothing else
can someone tell me why and guide me
thanks

Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.

somberi said:
Finally managed to get CWM recovery ported to Gionee Dream D1. Testing in progress.
Works great.
The External SD card is detected.
Did a nandroid backup, restored the back up without any problems.
Did a Factory reset and worked great.
Click to expand...
Click to collapse
That's great news. Thanks

On my windows 7 ThinkPad, it has never been able to detect the phone over the serial console. Perhaps I'll try it on someone else's box.

Gionee elife e3 development - root, cwm , roms , nadroid backup explained in detail

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Gionee Elife E3 is a Mobile made by a chinese Handset manufacturer Gionee , It is just 7.9mm thick and has a gorgeous display.
So in this Thread I will be discussing :-
READ AND FOLLOW THE WHOLE PROCEDURE..! ITS IMPORTANT
1. How to Root Gionee Elife E3
2. How to Flash CWM
3. Compatible Roms with Gionee Elife E3
4. How To Flash Custom Roms
5 . Difference Between Indian & Chinese Gionee Elife E3
6. Firmware You should Flash to install Custom Roms
Lets Start With - How to identify which Gionee Elife E3 Firmware You Are Currently Using .
Go into Setting >> System Update and Click on Update Firmware Button . If u notice anything there written in chinese or if u have the button of the System update in a circular Form then your elife e3 has the Chinese Firmware , otherwise u have The Indian Firmware :good:
Ok so now you identified which firmware u have. (Identifying which firmware u have will come in handy later on)
Lets Start Rooting of the Phone
ROOTING OF GIONEE ELIFE E3 (CHINESE AND INDIAN) -
STEPS - GO TO SETTING>> ABOUT PHONE
Repeatedly tap on Build Number (seven taps should do the trick) until you’re met with a message that reads: “you are now a developer!”
GO BACK TO SETTINGS
THEN TAP ON DEVELOPER OPTIONS
TICK MARK THE USB DEBUGGING OPTION
GO BACK TO SETTINGS
TAP ON SECURITY
TICK MARK THE OPTION "UNKNOWN SOURCES" AND CLICK "OK"
TAP THE HOME BUTTON NOW
:good:
INSTALLING THE USB DRIVERS BEFORE ROOTING -
YOU MUST HAVE TO INSTALL THE USB DRIVERS OF THE PHONE BEFORE ROOTING
SO DOWNLOAD THIS TOOL (PDANET)- http://pdanet.co/bin/PdaNetA4126.exe AND FOLLOW THE INSTRUCTIONS
INSTALL PDANET
FOLLOW THE PROCEDURE AND CLICK ON "OTHERS" OPTION IN THE PHONE SELECTION MENU
CONNECT YOUR GIONEE ELIFE E3 WHEN ASKED AND IT WILL AUTOMATICALLY INSTALL ALL DRIVERS :good:
Download MOTOCHOPPER (ROOTING TOOL) here:
http://vulnfactory.org/public/motochopper.zip
Instructions:
Extract the entire contents of the zip file.
Connect your device to your PC via USB. DO NOT TURN ON USB STORAGE ON YOUR GIONEE ELIFE E3...!!!!
If you are using Windows, navigate to the extracted directory and execute "run.bat". If you are using Linux or OS X, navigate to the extracted directory in a terminal and execute "./run.sh".
HIT ENTER
WAIT
Approve the ADB connection from your PC on your device. IF IT ASKS TO DO SO . DO NOT TURN ON USB STORAGE ON YOUR GIONEE ELIFE E3...!!!!
WAIT
HIT ENTER WHEN IT ASKS TO HIT ANY KEY
UR DEVICE WILL NOW REBOOT ON ITS OWN
AFTER REEBOOT YOU HAVE SUPERUSER INSTALLED,,!!
FLASHING THE CWM IF U HAVE INDIAN FIRMWARE -
Install "MOBILE UNCLE TOOL" FROM THE PLAY STORE
DOWNLOAD RECOVERY.IMG FROM PC - http://d-h.st/vcU
CONNECT PHONE TO PC VIA USB AND TURN ON USB STORAGE
COPY RECOVERY.IMG FILE TO THE ROOT OF INTERNAL SD CARD
DISCONNECT THE PHONE FROM PC
GO INTO MOBILE UNCLE TOOLS APP . GRANT IT SUPERUSER PERMISSION FOREVER
TAP ON RECOVERY UPDATE
SELECT THE "RECOVERY.IMG" FILE FROM INTERNAL SD AND FLASH IT
CLICK "OK" AND BOOT INTO RECOVERY "OK"
YOU ARE NOW IN THE CWM (CLOCKWORDMOD RECOVERY) VOLUME UP AND DOWN BUTTONS ACT AS UP AND DOWN (TO NAVIGATE)
AND POWER BUTTON ACT AS THE SELECTION BUTTON
CLICK ON REBOOT DEVICE OR REBOOT
AND THEN CLICK ON "YES" AND THEN "YES"
AFTER REBOOT YOU HAVE FLASHED UP THE CWM .. CONGRATS..! :good:
FLASHING THE CWM IF U HAVE CHINESE FIRMWARE -
CHINESE FIRMWARE'S DO NOT HAVE THE PLAYSTORE SO U WILL HAVE TO DOWNLOAD THE MOBILE UNCLE TOOLS SEPERATELY AND INSTALL THAT TO UR DEVICE , HERE'S THE LINK TO DOWNLOAD MOBILE UNCLE TOOLS - http://d-h.st/9Q8
AFTER U DONE INSTALLING
DOWNLOAD RECOVERY.IMG FROM PC - http://d-h.st/y4X (ITS THE RECOVERY OF BLU LIFE PLAY..IT WILL LATER HELP U FLASH UP ROMS)
CONNECT PHONE TO PC VIA USB AND TURN ON USB STORAGE
COPY RECOVERY.IMG FILE TO THE ROOT OF INTERNAL SD CARD
DISCONNECT THE PHONE FROM PC
GO INTO MOBILE UNCLE TOOLS APP . GRANT IT SUPERUSER PERMISSION FOREVER
TAP ON RECOVERY UPDATE
SELECT THE "RECOVERY.IMG" FILE FROM INTERNAL SD AND FLASH IT
CLICK "OK" AND BOOT INTO RECOVERY "OK"
YOU ARE NOW IN THE CWM (CLOCKWORDMOD RECOVERY) VOLUME UP AND DOWN BUTTONS ACT AS UP AND DOWN (TO NAVIGATE)
AND POWER BUTTON ACT AS THE SELECTION BUTTON
CLICK ON REBOOT DEVICE OR REBOOT
AND THEN CLICK ON "YES" AND THEN "YES"
AFTER REBOOT YOU HAVE FLASHED UP THE CWM .. CONGRATS..! :good:
MAKE A NADROID BACKUP FOR YOUR E3 BEFORE PROCEEDING (INDIAN AND CHINESE BOTH) , HERE'S HOW - http://www.youtube.com/watch?v=36cihz4l-vk
DO NOT RESTORE THIS BACKUP..!! ONLY MAKE A BACKUP
FLASHING UP CUSTOM ROMS AND AVAILABLE CUSTOM ROMS -
AVAILABLE CUSTOM ROMS FOR ELIFE E3 -
INFINITY HD
http://forum.xda-developers.com/showthread.php?p=44023789#post44023789
XPERIA HD
http://forum.xda-developers.com/showthread.php?p=44168616#post44168616
GamerzROM
http://forum.xda-developers.com/showthread.php?p=44168525
NOTE - IF U ARE USING THE INDIAN FIRMWARE .. U WILL NOT BE ABLE TO FLASH UP ROMS CURRENTLY .. SO U NEED TO FLASH UP THE CHINESE FIRMWARE TO YOUR GIONEE ELIFE E3
HERE'S THE CHINESE FIRMWARE -
ORIGINAL FIRMWIRE E3
Go with google translate here - http://www.elife.com/forum-40-3.html
firmwire part 1 : http://d-h.st/shk
firmwire part 2 : http://d-h.st/VEY
firmwire part 3 : http://d-h.st/4tJ
firmwire part 4 : http://d-h.st/ztI
FLAHTOOL (SP FLASH TOOL) : http://d-h.st/GeI
INSTRUCTIONS -
1. EXTRACT THE FIRMWARE ONTO YOUR DESKTOP
2. EXTRACT THE ZIP OF THE SP FLASH TOOL
3. OPEN THE "FLASH_TOOL.EXE" AS AN ADMINISTRATOR
4. CLICK ON SCATTER LOADING
5.BROWSE FOR "MT6589_ANDROID_SCATTER_EMMC.TXT" IN YOUR DOWNLOADED FIRMWARE FOLDER
6.OPEN IT
7. MAKE SURE ALL THE ENTRIES BELOW ARE TICK MARKED
8.THEN CLCK ON FIRMWARE>>UPGRADE (MOBLIE SHOULD NOT BE CONNECTED)
9. REMOVE THE BATTERY FOR FEW SECONDS
10.RE-INSERT IN AND WITHOUT SWITICHING ON THE MOBILE CONNECT IT
11. WAIT FOR THE PROCESS TO COMPLETE
AFTER COMPLETED U WILL SEE A GREEN RING
DISCONNECT THE MOBILE NOW AND BOOT IT UP
NOW U SHOULD FOLLOW THE PROCESS FOR ROOTING AND INSTALLING CWM FOR CHINESE FIRMWARE AND ALSO MAKE A NADROID BAKCUP ..!!!!
FOLLOW IT..!!
NOW ALL OF US HAVE THE CHINESE FIRMWARE .. LETS FLASH SOME CUSTOM ROMS
Download any of these :-
1. iNfinity HD V2: http://d-h.st/7UG
2. XPERIA HD - http://d-h.st/Tsf
3. GAMERZ ROM - https://docs.google.com/file/d/0B_biVoQFUltgQjZwN1NNc3RPZ1k/edit?usp=sharing
BEFORE PROCEEDING MAKE SURE U HAVE A NADROID BACKUP....!!
FOLLOW THIS PROCEDURE FOR FLASHING..!!
1) Download Rom.zip File
2) Put into ROOT OF Internal SD Card
3) Go To CMW Recovery BY PRESSING VOL+ AND POWER BUTTON TOGETHER OR BY MOBILE UNCLE TOOLS
4) Wipe Data/Factory Reset And Wipe Partition
5) From Advance Menu Do Dalvik Catch Clear
6) Go in Mount And Storage select FORMAT SYSTEM
7) Select Intall From SD and Select File And Click YES
8) Select YOUR ROM ZIP FILE And Select YES
9) Reboot Your System
10) Enjoy
IF U ARE STUCK IN A BOOT LOOP -
RESTORE THE NADROID BACKUP ..!!
THANKS...!!
CREDITS -
lalibm
trip007in
4peace1
sankhauaa
bhargav1991
lopestom
burakgon
AND ME (thegadgetnerd)
IT WORKS IF YOU FOLLOW THE CORRECT PROCEDURE..!!
READ THE WHOLE CAREFULLY...!!
DO IT AT YOUR OWN RISK I AM NOT RESPONSIBLE FOR ANY SORT OF DAMAGE
THANKS AGAIN...!!
​

on point bro but gamerz not work on e3 for now or did i missed something

Gamerz rom worked !!!
4peace1 said:
on point bro but gamerz not work on e3 for now or did i missed something
Click to expand...
Click to collapse
There are 2 versions of gamerz rom , to let it work , we have to install the General mobile discovery version . Currently i have gamerz rom installed on my e3 , i have provided the link of gamerz rom of general mobile discovery only
Thanks

thegadgetnerd said:
There are 2 versions of gamerz rom , to let it work , we have to install the General mobile discovery version . Currently i have gamerz rom installed on my e3 , i have provided the link of gamerz rom of general mobile discovery only
Thanks
Click to expand...
Click to collapse
ok let me try it this
i tried wrong one be that -v1.0 for Xolo Q800/Fly IQ446/Gionee gn708w/Symphony w125

U have to try the GENERAL MOBILE DISCOVERY VERSION
4peace1 said:
ok let me try it this
i tried wrong one be that -v1.0 for Xolo Q800/Fly IQ446/Gionee gn708w/Symphony w125
Click to expand...
Click to collapse
TRY THE GENERAL MOBILE DISCOVERY VERSION AND DOWNLOAD THE ROM AS IT IS .. DO NOT CHANGE ANY OF THE FILE'S LIKE BOOT.IMG.. !!
The General Mobile discovery one works and i have it installed on my Gionee Elife E3
Thanks

nice one but no selection of 3g on sim 2,no wifi setting

Follow
Galaxy Nexus cihazımdan Tapatalk 2 ile gönderildi

sir here you have given chinese firmware may i know which version of chinese firmware is this??? 1.2, 1.8 or 1.10(latest)
thank you

ok got it this is fw 1.2 we have to update after this

can anyone suggest which google apps package i should use to install google services in official chinese firmware posted here???
official google apps from goo.im doesnt seems to work properly it gives 492 error in play store

Just update it and install Google play store only

wont it need xml files and extra login service apk to installed in system???

milav said:
wont it need xml files and extra login service apk to installed in system???
Click to expand...
Click to collapse
Nope
from update sv1.8 all files to make Gapps works are there
just need to install apk of playstore,gmail etc
Sv1.0 old didnt have any Gapps installation files.

nandroid backup of chinese roms
can anyone upload chinese nandroid backup of their mobile so that it will be easy to flash custom roms

sheraz1015 said:
can anyone upload chinese nandroid backup of their mobile so that it will be easy to flash custom roms
Click to expand...
Click to collapse
Even I am also looking for Same...

help
can anyone help me and my friend Gavrav

sheraz1015 said:
can anyone help me and my friend Gavrav
Click to expand...
Click to collapse
@sheraz1015 milav is going to upload check this

thanx gavrav
Gauraav said:
@sheraz1015 milav is going to upload check this
Click to expand...
Click to collapse
thanx gavav

hi guys
can i install walkman music players app. without flasing custom roms..
i already rooted my phone and successfully install super user app. from step mentioned in 1st post...
i also download the xperia HD custom rom and try to install music player app but it fails??
any one plz help

ershibbu said:
hi guys
can i install walkman music players app. without flasing custom roms..
i already rooted my phone and successfully install super user app. from step mentioned in 1st post...
i also download the xperia HD custom rom and try to install music player app but it fails??
any one plz help
Click to expand...
Click to collapse
Did you flashed xperia HD ? For only music player I think you don't need root . I have also E3 , rooted stock and I am using almost all ported system apps including latest KitKat launcher , mail, camera ...without any problem. I always prefer manual system push rather that flash through cwm .I still in stock cwm.

[GUIDE][ROOT]All In One Root And Drivers Guide For Ubislate Tabs(Aakash)

Please Note: Whatever you are doing here is at your own risk.. Having said that, if you still blame me for spoiling the broth, well, I am not the COOK then.. So read properly and stop being noob..​
So, we start.....
This Guide is for Windows.. Follow each step properly before asking questions..​
Step 1: Setting up Drivers for Ubislate:
1. You need to install Android sdk from here and JAVA from here. Without java, sdk might show errors. So install JAVA and then SDK. I won't tell you how to install these.. Search..
2. This step onwards the real game starts.. once you install sdk, open sdk manager and install the necessary tools like sdk platform tools..Most important of it is installing google usb drivers from the list of options.. You will see this type of list :
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Choose sdk tools, sdk platform tools and google usb drivers from the list and click on Install Packages..
3. Once that is done, go to sdk folder and then to platform tools. Keep pressing the shift key and right click and select 'Open command window here'. Type 'adb' in small. If you see a list of options coming, you are good to go and sdk is installed.
4. Go to sdk folder again and in that go to extras/google/usb_driver. Replace the android_winusb file with the one provided below of this post. Just copy paste and replace.
5. Connect your Ubislate tab to pc and go to Control Panel/Hardware and Sound/Device and Printers/Device Manager.Go to other devices in the list and You will see an exclamation mark on your device named Android.
6. Right click on it and click on Update driver software.
7. Select Browse my computer for update driver and then click on Let me pick up from a list of device drivers.
8. From Common hardware types select Android Device and then click on Have Disk
9. An Install from disk dialog box appears. Click on browse and go to sdk folder where you have copied the android_winusb file i.e extras/google/usb_driver. Select android_winsub and click on OPEN. A list of drivers will now open
10. Click on Android ADB Interface and then click on next. Done!! You now have ADB access for your Aakash tab. To check, go to sdk folder/platform-tools and open command window and type adb devices. You will see your device in List of devices attached with some number and device written besides it.
Please Note: The drivers will not get installed on Windows 8 untill you disable DIGITAL DEVICES DRIVER ENFORCEMENT.. Search on google on how to disable it.. Its damm easy..
If you are done with this only then move ahead......​​​​​
Click to expand...
Click to collapse
​
Step2:Installing CWM Recovery and Rooting:
1. I have made a fully working recovery for Ubislate tabs which works very well without any problems and detects the internal sd card without issues. Follow this guide here and install recovery on your aakash tab.
2. To reboot to recovery, press and hold VOL + key and Power key till the tablet boots into recovery or else there is a bat file in the zip file provided in the above link, run it and your tab will automatically boot into recovery.
3. Download Superuser.zip provided below and copy it to your internal sd card.
4. Boot to recovery and click on Install zip from sd card>choose zip from internal sd card. Navigate to the folder where you have placed the Superuser.zip and install it.
5. Reboot and you are finally done.. You now have a rooted Aakash tab with a CWM Recovery installed and proper ADB Drivers
I recommend all users to make a NANDROID BACKUP before making any changes into system as I Haven't found any Perfectly working ROM for AAKASH TAB.. Go Ahead and Enjoy​
Click to expand...
Click to collapse
​
This has perfectly worked on my Ubislate 7ci and should work on other versions of Aakash Tab too. Though test it and let me know as I haven't tested it on other tabs.​

reserved

vishal_android freak said:
Please Note: Whatever you are doing here is at your own risk.. Having said that, if you still blame me for spoiling the broth, well, I am not the COOK then.. So read properly and stop being noob..​
So, we start.....
[/CENTER]
[/CENTER]
This has perfectly worked on my Ubislate 7ci and should work on other versions of Aakash Tab too. Though test it and let me know as I haven't tested it on other tabs.​
Click to expand...
Click to collapse
i am stuck at step 5.....please help!!!!
i am not getting any option as android in other devices.....my tab is connected to pc....but i dont know whether usb debugging is on....please help!!!
see the screen shot...

help!!
i can connect my tab in recovery mode......adb recognises it in recovery mode....under list of devices attached.....it says 201xxxxxxce recovery......i tried installing recovery but didnt work....please help........

prashantboriwal said:
help!!
i can connect my tab in recovery mode......adb recognises it in recovery mode....under list of devices attached.....it says 201xxxxxxce recovery......i tried installing recovery but didnt work....please help........
Click to expand...
Click to collapse
Use the other batch file and see.. I have provided 2 bat files
Sent from my MT11i using xda premium

I used both.....but no success!
Sent from my Micromax a68 using xda app-developers app

hey mate....when will you upload the backup????
Sent from my Micromax a68 using xda app-developers app

prashantboriwal said:
hey mate....when will you upload the backup????
Sent from my Micromax a68 using xda app-developers app
Click to expand...
Click to collapse
My net not working.. Il do it as soon as its fixed..
Sent from my Xperia Neo V using xda premium

ok...thanks....
Sent from my Micromax a68 using xda app-developers app

What to do???
Please help mate
Sent from my Micromax a68 using xda app-developers app

ADB Driver
Does anyone have an ADB driver that works for this tablet (UbiSlate 7ci)? I've downloaded the one from Android SDK numerous times as well as a few others. None have worked so far.
I'm not a total noob as I've rooted my S3, two Nexus 7's, a Droid 4, a Droid 2, a DINC as well as a KFHD.
Thanks in advance.
Jeremy
Update:
Problem solved... I used this http://dl.xda-developers.com/attach..._AOSP_Rk29sdk_Android_4.0.3-7inch-Tablet.pdf; specifically step 11 &19 to get ADB working.
Now I just need to root this device. The box shows that it's an A9 chip so hopefully this still works, also it was delivered running Android 4.2.2

Awsome guide
This is a real good guide thank u so much

Varun002 said:
This is a real good guide thank u so much
Click to expand...
Click to collapse
My pleasure..
Sent from my Nexus 5 using xda app-developers app

Hi,
I'm wondering if you can help me.
I followed your guide for my Ubislate 7Ci. I used the Recovery install guide from here and rebooted into Recovery using the batch file included in the zip. Now I'm stuck in Recovery and can't do anything. I get an error message saying
E: Can't mount .....(insert ~4 file paths here)
Click to expand...
Click to collapse
when CMW boots or if I try to manually mount something. If I choose "Reboot system now" I end up back in CMW.
Any ideas as to what I can do?

U have flashed recovery img in place of boot.img. you need to flash boot.img again from stock rom
Sent from my Nexus 5 using Tapatalk

vishal_android freak said:
U have flashed recovery img in place of boot.img. you need to flash boot.img again from stock rom
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks for the quick reply!
Do you know of anywhere I can get the stock rom (or boot.img)? My google-fu is letting me down and I didn't do a backup before I started

talking_walnut said:
Thanks for the quick reply!
Do you know of anywhere I can get the stock rom (or boot.img)? My google-fu is letting me down and I didn't do a backup before I started
Click to expand...
Click to collapse
And u are happy about it that u didn't do a backup?? LOL. There is no stock rom available for aakash tabs. Boot.img i am not sure if i have it.. I must be having it in my backup.. I'll give it to u later when i get time
Sent from my Nexus 5 using Tapatalk

vishal_android freak said:
And u are happy about it that u didn't do a backup?? LOL. There is no stock rom available for aakash tabs. Boot.img i am not sure if i have it.. I must be having it in my backup.. I'll give it to u later when i get time
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
That would be brilliant vishal! I just assumed all this stuff would be online like all the other android devices I have. Got lazy...
P.S. That's supposed to be the "embarrassment" face but the dude does look for too pleased with himself

talking_walnut said:
That would be brilliant vishal! I just assumed all this stuff would be online like all the other android devices I have. Got lazy...
P.S. That's supposed to be the "embarrassment" face but the dude does look for too pleased with himself
Click to expand...
Click to collapse
Keep in mind, no matter what, you always have to take backup before doing anything with your phone if you aren't sure about what will happen. And this becomes must when playing with devices which don't have many stuff available related to it.. Next time do consider this. because being an owner of such a great Tab( sarcasm intended), you need to be sure about alllll this.
Sent from my Nexus 5 using Tapatalk

[18-Sept-13] Micromax A74 Canvas FUN: Discussions & All Things Thread

{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Key Features of Canvas FUN A74
Dual SM (GSM + GSM)
Android v4.2.2 (Jelly Bean) OS
3G And Wi-Fi Enabled
Expandable Storage Capacity of 32 GB
4.5-inch Capacitive Touchscreen
5 MP Primary Camera With Flash
0.3 MP Secondary Camera
720p HD Recording
512 MB RAM, 4 GB ROM
1.3 GHz Dual Core MT6572 Processor
Mali-400 GPU
Gravity Sensor, Proximity Sensor
More Info. At Flipkart
BenchMark N Vellamo Test By: Atanu Ghosh
Antutu Scores=1173
HTML 5 Score=1607
Metal score-475
Root Your Canvas FUN A74 Test By: vjbittu7
One Click Method For Rooting Micromax A74, You Don't Even Need A PC To Root Your Device, Just Download The FRAMAROOT Application And Follow The Steps Below.
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu, as SuperUser didn't work for me.
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
CWM/COT/Others Recovery
*Still Not Port Yet!
Backup/Stock/Custom Roms
*If Anyone Have Link Then PM Me
Rate This Thread
PRESS THANKS BUTTON BELOW

Reserved.......

How to enter recovery mode: Micromax canvas fun a76 and a74
HOW TO ENTER RECOVERY MODE: MICROMAX CANVAS FUN A76 AND A74
1. SWICTH OFF PHONE.
2.REMOVE THE BATTORY
3.INSERT THE BATTORY
4.AND PRESS VOLUME UP + POWER BOTTUN TOGETHER
STOCK ROM FOR A74
DOWNLOAD LINK:
http://www.moulnisky.com/index.php?...W/&file=LWDEB07_2013-08-01_factory_update.zip
STOCK ROM FOR A76
DOWNLOAD LINK:
http://www.moulnisky.com/index.php?...3/&file=LWDEB05_2013-07-18_factory_update.zip
HOW TO FLASH STOCK ROM:
1. COPY .ZIP FILE TO SD.CARD
2.ENTER IN RECOVERYT MODE.
3.CHOOSE UPDATE FROM SDCARD
4.AND CHOOSE THE ZIP FILE.

Hiii just saved my money. Sold s4 and bought a74 both have 4.2.2 xD
So,what's going on.. Any update news??
Sent from my Micromax A74 using xda app-developers app

HOW TO INSTALL CMW RECOVERY IN MICROMAX CANVAS FUN A74 AND A76.
1. FIRST ROOT YOUR MOBILE.
2.INSTALL BUSYBOX ON MOBILE.
2.INSTALL MTK DRIVERS ON YOUR WINDOWS PC.
3.DOWNLOAD MTK DROID TOOLS.
4. EXTRAT MKT DROID TOOL.ZIP AND INSIDE FOLDER YOU FIND MTKdroidTools.ini. OPEN THIS FILE IN NOTEPAD++.
5.YOU FIND THIS LINE MTKsocs = ^MT65(16|73|75|77|89) IN THE MTKdroidTools.ini.
6.REPLACE THE 73 TO 72 LIKE THIS MTKsocs = ^MT65(16|72|75|77|89) AND SAVE THE FILE.
7.RUN MTK DROID TOOL.EXE AS ADMIN.
8.GO TO SETTINGS>ABOUT AND TOUCH 1 TO 5 TIMES ON BULID NUMBER. AND YOU CAN SEE DEVELEPOR OPTIONS APPER ON SETTINGS AND TICK ON USB DEBUGGING.
FOLLOW THIS STEPS:
1.Connect your switched on rooted mtk device to your computer and open MTKDroid tool, the tool will recognise your device and connect to it, if the colour indicator in the bottom left corner is green, you already have root shell,and can go on to the next step, if it is yellow, click on the root button at the bottom, and wait for the progress bar, if the indicator stays yellow, or you get an error message, this probably means you do not have Busybox installed, you can install it from the google play store. When the indicator turns to green you have root shell which is necessary for this operation.
2.Next click on the tab 'root,backup,recovery' and select 'to use boot from phone' then click on 'recovery and boot' and shortly after a dialogue box will appear asking if you want to 'make cwm recovery automatically' click yes
3.The tool will then create the recovery and another dialogue box will appear asking to 'install created recovery to phone', click yes.
4.And finally the tool will ask to reboot into recovery mode, click yes and the device will reboot into CWM recovery so you can check the installation was successful.

hdmaza said:
HOW TO ENTER RECOVERY MODE: MICROMAX CANVAS FUN A76 AND A74
Click to expand...
Click to collapse
Funny, I am using A76 and when I copied the stock rom zip file in sdcard and try to enter into recovery mode by pressing Volume Up and Power button simultaneously, it starts to erase previous version and installs the copied zip automatically.

Is a74, a76 and a63 roms same?
amolebirje1982 said:
Funny, I am using A76 and when I copied the stock rom zip file in sdcard and try to enter into recovery mode by pressing Volume Up and Power button simultaneously, it starts to erase previous version and installs the copied zip automatically.
Click to expand...
Click to collapse
Please provide download link for a63 rom! URGENT!

I Already installed CWM Recovery in A74
Hey Folks i already installed CWM Recovery in my Friends A74, i dint edit anything..
soon uploading CWM Recovery here as well as boot.img which have fully unsecure if u guys need it.
Thanks
Hardy
EDIT :- Now Add Modified and Unsecure Boot.img and CWM Recovery for Micromax A74 here with MT6572_EMMC_Scatter.txt, so user can flash throw Mobile Uncle Tools and also with Sp Flash Tool too if any third party apps give error to installing recovery.
NOTE :-
Click to expand...
Click to collapse
1. If you use any third party apps like mobile uncle tools or recovery manager to installing cwm recovery then your device must need to be rooted.
2. if you use Sp FLash Tool for flashing recovery then you no need to root your device.
Click to expand...
Click to collapse
Download recovery & boot.img from here :
Click to expand...
Click to collapse
DOWNLOAD
here is proof of recovery is working fine and tested , but still either me or XDA-MEMBERS are not responsible for any damage in your device , so do at your own risk.

BHARDIK said:
Hey Folks i already installed CWM Recovery in my Friends A74, i dint edit anything..
soon uploading CWM Recovery here as well as boot.img which have fully unsecure if u guys need it.
Thanks
Hardy
Click to expand...
Click to collapse
Do u see GPSsatellites option in location access settings?:victory:
---------- Post added at 08:14 PM ---------- Previous post was at 07:59 PM ----------
BHARDIK said:
Hey Folks i already installed CWM Recovery in my Friends A74, i dint edit anything..
soon uploading CWM Recovery here as well as boot.img which have fully unsecure if u guys need it.
Thanks
Hardy
Click to expand...
Click to collapse
Do u see GPSsatellites option in location access settings?:victory:

sorry guys now i am no longer to update this thread
really sorry

https://www.youtube.com/watch?v=BA8xydrMR60&feature=youtube_gdata_player
Unboxing video by me
Sent from my C5302 using xda app-developers app

Where can I find the adb driver download for Micromax A74?

Micromax canvas fun a74 gps not locking issue
Anyone having problem with GPS, checkout this post about canvas HD. Works for fun a74 too. Now mine locks in less than one minute.
http://forum.xda-developers.com/showthread.php?t=2290265

Adb driver for micromax A74
droidbot678 said:
Where can I find the adb driver download for Micromax A74?
Click to expand...
Click to collapse
you can find it here adbdriver.com/downloads/

Hello.
Managed to install Carliv Touch Recovery with the CTR for MTK port tool.
Here is the tool : http://forum.xda-developers.com/showthread.php?t=2471479
You must have ADB drivers I think, a rooted device (Framaroot works great for it) and you launch the tools as Admin (Win7 x64 for me) and you choose "Auto" (Yes button at launch) and you wait for popup to close and then... it is ok

Modified stock rom for micromax A74
Check this out http://forum.xda-developers.com/showthread.php?t=2683370...

Mandeep148 said:
Hiii just saved my money. Sold s4 and bought a74 both have 4.2.2 xD
So,what's going on.. Any update news??
Sent from my Micromax A74 using xda app-developers app
Click to expand...
Click to collapse
You crazy?
You sold your S4 to get an A74?

id74em8 said:
You crazy?
You sold your S4 to get an A74?
Click to expand...
Click to collapse
Erm.. You didn't got the joke. Relaxe.
Sent from my Micromax A74 using xda app-developers app

Alternative
sahil11 said:
Key Features of Canvas FUN A74
Dual SM (GSM + GSM)
Android v4.2.2 (Jelly Bean) OS
3G And Wi-Fi Enabled
Expandable Storage Capacity of 32 GB
4.5-inch Capacitive Touchscreen
5 MP Primary Camera With Flash
0.3 MP Secondary Camera
720p HD Recording
512 MB RAM, 4 GB ROM
1.3 GHz Dual Core MT6572 Processor
Mali-400 GPU
Gravity Sensor, Proximity Sensor
More Info. At Flipkart
BenchMark N Vellamo Test By: Atanu Ghosh
Antutu Scores=1173
HTML 5 Score=1607
Metal score-475
Root Your Canvas FUN A74 Test By: vjbittu7
One Click Method For Rooting Micromax A74, You Don't Even Need A PC To Root Your Device, Just Download The FRAMAROOT Application And Follow The Steps Below.
1. Download & Install Framaroot.apk and open it.
2. Choose Install SuperSu, as SuperUser didn't work for me.
3. Then Click on "Boromir".
4. It Will Display A Root Confirmation Message, Click On "OK" And Then "REBOOT" Your Device.
5. After Reboot You Will Find SuperSu Application In The App Drawer.
If you see the application then you have successfully rooted your device.
Thanks to the developers of FRAMAROOT
CWM/COT/Others Recovery
*Still Not Port Yet!
Backup/Stock/Custom Roms
*If Anyone Have Link Then PM Me
Rate This Thread
PRESS THANKS BUTTON BELOW
Click to expand...
Click to collapse
You can try using Xolo A600 recovery & ROMs.. build with the same chipset (6572W)
Replace boot.img before flashing A600 ROMs

lewa os for micromax a74
finally lewa os came to our device check this thread http://forum.xda-developers.com/showthread.php?p=53140337