Related
How many times did you droped your XD or XDA II? is there any scratches? any errors appeared?
double_ofour said:
How many times did you droped your XD or XDA II? is there any scratches? any errors appeared?
Click to expand...
Click to collapse
In case : repeatedly, but no harm done..
Wothout case: Only once, and it got scratched on the front near the Bluetooth led and near the answerbutton below.
No errors !
dropped it once. the point of impact was directly on the yellow/red led which pushed the led inside the XDA2. no errors occurred. but i'm pissed!
you're all lucky buggers, i've dropped my xda twice in the last year. First time it cracked the screema nd had to replace that, and dropped it again this morning and the screen's messed up but not cracked, how do you lot get away with it, i didn't even drop it from a great distance and it was a capeted floor
Why i am asking the times you dropped it, beacouse mine was dropped a miniut ago. i was so nervous and worried. but there is no scratches or errors, when the time it was dropped, it restarted and search for something i found bad, but there is nothing bad happens, still i am worried and nervous.
if there's nothing obvious just after you drop it, chances are you're lucky and it'll be fine
Dropped it 5-6 times (Im not clumsy, really, Ive had it for 10 months now ), always in the standard case, which offers little protection on the sides, resulting in a number of scratches to the device on the sides. No errors however, seems like a tough enough device. If I put on a new cover it will be as good as new
Surur
i dropped my device once and a little peace of the black plastic is cracked.
Who knows where i can get the black peace from the back site of the phone? I have search here in the Netherlands but doesn't find it yet
Dropped the XDA I in its case dozens of times, no real damage. Unfortunately, I have been carrying the XDA II in the old case, and it fell out twice now and hit the pavement naked. No functional damage, but sure scratched it up.
mwetering said:
i dropped my device once and a little peace of the black plastic is cracked.
Who knows where i can get the black peace from the back site of the phone? I have search here in the Netherlands but doesn't find it yet
Click to expand...
Click to collapse
The crack in the black plastic was probably not from the drop. A buddy and myself had the crack develop by the power button and then aother to where it made the piece fall out. Neither of us had dropped ours at that time. Since then only twice in the case. One no damage, second hit the corner by the voice recorder button. Drop on the pavement from about 2 1/2 feet. No functional damage but the silver part is definatley got the marks to show...
Dustoff
seriously, how do you buggers get away with scratches when mine always gets damage i have to pay for, i'd give anything to know taht if i drop if it won't cost me a penny
I have quick reactions and have always managed to stick my foot under it to cushion the fall.
lol, i have steel toe capped boots, i think it would be slightly worse
I dropped mine on concrete . . . no cover . . . naked. The antenna cover (black plastic) cracked diagonally up from the record button to the top of the back and then back down past the external antenna connector. It seems to be holding fast and working perfectly - but at some point I am going to want to replace it.
i dropped mine of a roof and its still works just damage to my case on the corner next to my green light so if anyone knows how to get a new one please let me know
a roof? this get's better, mine fell off a bed and it's buggered
i've never dropped mine. Didn't know I was supposed to.
dropped mine on carpet few times no damage, dropped it in the garage hit the ladders then conrete floor dented the sides and corner....
changed housing.....
got a clear plastic case
had a car crash phone was thrown out the windscreen plastic case totally ****ed but only 2 minute scrashes on my xda 2 cant beleive it survived the car crash
gazzaman2k said:
dropped mine on carpet few times no damage, dropped it in the garage hit the ladders then conrete floor dented the sides and corner....
changed housing.....
got a clear plastic case
had a car crash phone was thrown out the windscreen plastic case totally ****ed but only 2 minute scrashes on my xda 2 cant beleive it survived the car crash
Click to expand...
Click to collapse
Where did you find the casing?
I've been lookig everywhere for a replacement for mine...
I dropped it to concrete from about 12 inches, I dented one corner (near the bluetooth led) and scratched the two corners on the bottom...
Pleaaassse! Let us know where to get a replacement case!!!
Best regards,
Rayan
drop no
i did not drop it it fell off the car roof doing about 40mph,20min to find the bits dented the yellow led corner,and now it reboots on its own where can i find a new case from any body know plz plz help i am so fed up. And o2 are c**p at helping u...................
I know there are thousands of people looking all over the web for a solution to their captivate's rear speaker cutting out and I am happy to report I have a solution for you! I searched all over these forums, all over google, and by the grace of God I somehow found this suggestion in a comment on a pointless YouTube video with around only a thousand views. But whatever! Here it is...
Take off the back casing of your phone (it's not too difficult; here are the instructions http://forum.xda-developers.com/showthread.php?t=740022)
Once you have the back all opened up you should see one lone screw remaining just to the left of the speaker
Loosen the screw
That's it!!!!!!!! The guys' comment on YouTube said he noticed the screw was in so tight that that it was bending the circuit board and messing up the connection. Which makes sense to me because earlier I noticed that pushing down on the right side of the speaker (on the opposite side of the screw) seemed to help better than pushing anywhere else.
So stop listening to all the threads that say "just push on the speaker" or "get it repaired" or "just deal with it." I had jammed stuff in behind my back cover that was so thick it started to bend the metal, but it was always just a temporary fix. No pressure was ever enough pressure to get the speaker consistently working. Who knew the answer would be less pressure? Or that it would be so simple...
Now go fix your phone and enjoy!
UPDATE: If you are still having problems, try mithileshpatel007's fix from page two of this thread. Sounds like people have had luck with his method too. He suggests repositioning the speaker ribbon. The ribbon is located on the far right and can be seen going from the bottom of the speaker housing to a small terminal that may be covered by a piece of blue tape. Everything is so tiny that it sort of all looks like one piece but what you can do is...
flip up a tiny black latch (bottom of the terminal)
reposition or remove + replace the ribbon (enters at the top of the terminal). There isn't much slack, but try to get it as far in there as possible
PLEASE BE CAREFUL! The ribbon is tiny and pretty stiff and some people have reported problems just getting their phone open, much less playing around. Remember this is a tiny device made to do big things so it's not as durable as your GameBoy Color! Handle with care.
Clarification
I should clarify. I loosened the screw till it was coming out and then tightened it VERY gently. I screwed it back in and stopped at the first feel of resistance. I did this last night and have been blasting music and getting notifications without any problem since.
Check back in a day or two. A couple hours of a fixed speaker doesn't impress me...been there done that. But I did fix mine tho.
Sent from my SGH-I897 using xda premium
Thanks for this info. My speaker just started acting up the other day. I pushed on it like others have said to, and so far it has been good for a couple of days now. If it so much as acts like it is going to do this again, I will take the above steps.
Thanks!
Check back in a day or two. A couple hours of a fixed speaker doesn't impress me...been there done that. But I did fix mine tho.
Sent from my SGH-I897 using xda premium
Click to expand...
Click to collapse
My speaker is still working great. I understand the skepticism but I wanted to put the post up right away because 1) the fix made so much sense to me, 2) my speaker was ALWAYS cutting out before I did it and NEVER cut out after, and 3) I wanted to help as many people as soon as possible because I know how maddening this problem is!
How did you fix yours? And by the way, impressing you was never my goal
Works!
Thanks for this suggestion! I've been fighting this problem for months now and the tap-tap-push method only ever fixed the problem for a few minutes. Since trying your "fix" my speaker has worked for 2 days now!
Thanks so much for this... Had mine fixed in a jiffy...
snoboarder071 said:
My speaker is still working great. I understand the skepticism but I wanted to put the post up right away because 1) the fix made so much sense to me, 2) my speaker was ALWAYS cutting out before I did it and NEVER cut out after, and 3) I wanted to help as many people as soon as possible because I know how maddening this problem is!
How did you fix yours? And by the way, impressing you was never my goal
Click to expand...
Click to collapse
Lol
Sent from my SGH-I897 using xda premium
Finally!!!
no more being late for work because the alarm didn't sound!
so far so good! before the fix my captivate had sound maybe 5% of the time. hasn't cut out yet since loosening that pesky screw!
thanks!
For those of you who do not have warranty or insurance, there is a fix for this.
I just got done with re assembling the phone after a fix I performed. It is real easy to do.
Things you need:
-A screwdriver (whatever the size is when you open the back cover, the four screws you see, that size)
-A small flat head screwdriver if you have one (not necessary but would help)
-Patience and some common sense.
Ok, to start off follow these steps http://forum.xda-developers.com/showthread.php?t=740022 to open the first 6 screws and then how to pop open the screen from the bezel(this is when a flat head screwdriver would be useful).
(go just to the step till the fifth picture in that thread, no need to go beyond that opening things!)
Now, you would see a screw on the left of the speaker. Now, other threads said that by loosening that screw the speaker would work. But, I did that and still had issues so I opened the phone like 4 times in total before I found out what it was. Now, notice that the speaker unit has a cable (orange colored) running into the main phone chip. It is connected there through which it functions. When you open that above mentioned thread to open the phone there is a picture showing to remove the that belt from the board. Follow that instructions, flip that tiny black clip up to remove the belt. In some cases there might be a blue sticker kind of thing on the belt, just take off that sticker. The problem seems that the belt is loosing contact which doesn't allow the speaker to get the sound input to put out sound through the speaker. So, take off the belt by flipping that switch and re insert it out there. Try to push it in properly or enough to align a white line on the belt and the chip. There is a white line to guide us there. That line should be totally straight when the belt is inserted appropriately. And now, flip that clip down and lock it. If you have loosened the screw left to the speaker, put it back in in normal force not excessive(no need to be more gentle here). You cannot leave it loose because it makes the whole unit move when it is loose eventually pulling off the belt from its place which causes the sound cut outs. The whole trick is to get the belt right in its place. So, make sure it is tight but not extra tight after you have managed to get the belt right. Put everything back together and now when you screw the last 6 screws again, the one in the top speaker corner affects the speaker unit, so don't push it too hard in. Just normal screwing. The rest should be done properly with normal force. This should solve it. I figured this out after opening the phone 4 times. And now playing songs since the past 6 hours non stop and its back in action again!
For all this, i did put in the battery and start the phone when I had opened it and tried messing around and figured out what was killing the sound, so this should be the ultimate solution to it. There is nothing else that can be affecting it now.
Most people must had faced this because they dropped their phones before which made the belt to move and hence the loose contacts inside. If not then, there are high chances that you bought it from someone or somewhere who had dropped it before!
Well that's it! Also, don't freak out in having to open the phone. You should just go to the step till the fifth picture. Which is very easily achievable!
Go, have fun with your WORKING speakers now!
I tried to open my Cappy but failed a unscrewing the middle screws...they are soo tight
My problem is that the ribbon cable between the speaker and the board is too short. No way to line that white stripe up. Got it in there as best I could and so far so good
I'm just guessing... but I would think that because this could possibly void a warranty is the only reason they don't make this a sticky, but it really should be...nice find and much appreciated. It is a common and very annoying problem and this fix really does seem to work!
Sent from my SAMSUNG-SGH-I777 using XDA App
Rear Speaker Fix - Thanks for the advice!
Just successfully disassembled my wife's phone without busting it into 1 million pieces. I loosened that screw next to the speaker, tightened just until i felt it start to grab, backed it off 1/16th of a turn, and the speaker works now. Great job on hunting down that video.
-Word of advice, The screw your loosening on the speaker housing is also the screw that holds the motherboard secure. I would recommend not removing the screw. The Captivate may self destruct if you do so.
10 out of 10 HERE! THUMBS UP!
Thanks.
______________________
Samsung Captivate i897
Firmware: Gingerbread 2.3.5
Baseband: I897UCKK4
Kernal: 2.6.35.7-I897UCKK2-CL614489
BUILD: GINGERBREAD.UCKK4
worked for me
So I attempted this fix, considering I had no sound from the speaker at all.
I managed to somehow break the black connector flap that holds the ribbon cable in off of the connector. Now the speaker has no connection whatsoever, and now I don't have the vibrate function as well. (The speaker and vibrating motor are in the same assembly.)
Just a word to the wise. (I think I had actually broken my speaker, because I could get no sound at all, even before I broke the connector.)
mithileshpatel007 said:
For those of you who do not have warranty or insurance, there is a fix for this.
I just got done with re assembling the phone after a fix I performed. It is real easy to do.
Things you need:
-A screwdriver (whatever the size is when you open the back cover, the four screws you see, that size)
-A small flat head screwdriver if you have one (not necessary but would help)
-Patience and some common sense.
Ok, to start off follow these steps http://forum.xda-developers.com/showthread.php?t=740022 to open the first 6 screws and then how to pop open the screen from the bezel(this is when a flat head screwdriver would be useful).
(go just to the step till the fifth picture in that thread, no need to go beyond that opening things!)
Now, you would see a screw on the left of the speaker. Now, other threads said that by loosening that screw the speaker would work. But, I did that and still had issues so I opened the phone like 4 times in total before I found out what it was. Now, notice that the speaker unit has a cable (orange colored) running into the main phone chip. It is connected there through which it functions. When you open that above mentioned thread to open the phone there is a picture showing to remove the that belt from the board. Follow that instructions, flip that tiny black clip up to remove the belt. In some cases there might be a blue sticker kind of thing on the belt, just take off that sticker. The problem seems that the belt is loosing contact which doesn't allow the speaker to get the sound input to put out sound through the speaker. So, take off the belt by flipping that switch and re insert it out there. Try to push it in properly or enough to align a white line on the belt and the chip. There is a white line to guide us there. That line should be totally straight when the belt is inserted appropriately. And now, flip that clip down and lock it. If you have loosened the screw left to the speaker, put it back in in normal force not excessive(no need to be more gentle here). You cannot leave it loose because it makes the whole unit move when it is loose eventually pulling off the belt from its place which causes the sound cut outs. The whole trick is to get the belt right in its place. So, make sure it is tight but not extra tight after you have managed to get the belt right. Put everything back together and now when you screw the last 6 screws again, the one in the top speaker corner affects the speaker unit, so don't push it too hard in. Just normal screwing. The rest should be done properly with normal force. This should solve it. I figured this out after opening the phone 4 times. And now playing songs since the past 6 hours non stop and its back in action again!
For all this, i did put in the battery and start the phone when I had opened it and tried messing around and figured out what was killing the sound, so this should be the ultimate solution to it. There is nothing else that can be affecting it now.
Most people must had faced this because they dropped their phones before which made the belt to move and hence the loose contacts inside. If not then, there are high chances that you bought it from someone or somewhere who had dropped it before!
Well that's it! Also, don't freak out in having to open the phone. You should just go to the step till the fifth picture. Which is very easily achievable!
Go, have fun with your WORKING speakers now!
Click to expand...
Click to collapse
This worked on mine, thank you!!!
don't know why but i can't get that battery latch to move down to get the two remaining screws
disellusional said:
don't know why but i can't get that battery latch to move down to get the two remaining screws
Click to expand...
Click to collapse
after sliding it down just lift it slightly in the middle, it flexes up and then slides down about another half inch.
So I ended up cracking my screen and installed a replacement last night. Everything seemed fine but I noticed, after putting it back together, that any slight bit of pressure or shock to the top causes my N5 to shut off.
I took it apart again to make sure all of the ribbons were properly connected and to take a second look and everything appears fine. I didn't have this problem prior to the replacement and I was very gentle during the tear down and reassembly so I don't the the CPU or anything on it is damaged. Other than the top being hyper sensitive the phone works perfectly.
Any ideas on what the problem is or could be?
SOLVED(sorry, I don't know how to change the title)
I just wanted to fill in anyone curious or running into this problem in the future on how I resolved the issue.
So after some time I narrowed the problem down to the second back cover (the one with the camera lens and beneath the Nexus branded cover) making contact with the motherboard. More specifically, compressing the power management IC with its aluminum cover. You want to make sure that chip is laid flush which was a PITA, for me at least, because the headphone jack and earpiece speaker wants to push it up and out. What I did was put the jack in, lay the board on top, then gradually adjusted the jack with tweezers while gently pushing the motherboard down until the board was flush, then placing the earpiece speaker in.
I then placed the second back cover on and tightened the screws until I could feel them just slightly putting pressure on the cover. I can't stress how light this pressure is as it is the key in resolving this issue. To compare it to changing your oil filter on your car; when you can feel the filter make solid contact with the block and you then turn it about another half turn to seal it; it's like that but without that half turn.
Anyway, I hope this helps anyone else unfortunate enough to both break their screen and then have their phone randomly shut down when any pressure is applied after fixing it.
hello
TCGUK said:
So I ended up cracking my screen and installed a replacement last night. Everything seemed fine but I noticed, after putting it back together, that any slight bit of pressure or shock to the top causes my N5 to shut off.
I took it apart again to make sure all of the ribbons were properly connected and to take a second look and everything appears fine. I didn't have this problem prior to the replacement and I was very gentle during the tear down and reassembly so I don't the the CPU or anything on it is damaged. Other than the top being hyper sensitive the phone works perfectly.
Any ideas on what the problem is or could be?
Click to expand...
Click to collapse
hello where didu buy the screen for your new n5 ? there is any king of intrusion to do it .
thank:good:
josedecuba said:
hello where didu buy the screen for your new n5 ? there is any king of intrusion to do it .
thank:good:
Click to expand...
Click to collapse
I bought mine off of eBay and it cost me $150. I could be wrong but it looked like the screen can't be separated from the frame. You might want to keep that in mind when purchasing because there are sellers that sell the screen without a frame. Tearing down the N5 was pretty simple. The hardest part for me was getting the back cover off as there are 4 (two on each side) large clips. If you end up bending the clips any, you can push them back to shape to keep the back from creaking like every Samsung I've ever owned. There's a nice guide on iFixit if you want to look at the process prior to ordering a new part.
I've read from others that you can send your phone into LG and they'll repair the screen for you. When you send it in they'll email a quote to you within a day. The price I keep seeing is $146 and I have no idea what the turn around on that is.
Hey,
just got the 16GB from tesco.
When I opened it, (factory sealed box), the case was not clipped all the way on, and the top edge was open a bit. I opened it properly, from the bottom as instructed. Sim car already in, so clipped case on.
Basically there is 1mm gap, right next to the headphone jack and microphone on top of the phone. So, I took case off and had a look. The body has a space for an extra clip next to microphone, but the back case misses this one out (presumably to make room for rubber bit on microphone). I had a look at the pink case in the box, this also misses this clip.
Do other peoples phones case sit tight and flush on the top edge? or is my phone maybe wonky!! I worried the numpty who put the tesco sim in has distorted the chasis, or I just have been unlucky.. Its pretty minor, but its dust access so would prefer a tight fit!
FYI, there stock systems are screwed for xmas. Says out of stock everywhere, including when you phone up the store. I went to a tesco Extra, it had lots and lots in stock. Same price as Tesco direct. So, if you still want one for £129, 16GB. Get to your nearest tesco extra, you may well get one if they have a phoneshop instore.
helppme said:
Hey,
just got the 16GB from tesco.
When I opened it, (factory sealed box), the case was not clipped all the way on, and the top edge was open a bit. I opened it properly, from the bottom as instructed. Sim car already in, so clipped case on.
Basically there is 1mm gap, right next to the headphone jack and microphone on top of the phone. So, I took case off and had a look. The body has a space for an extra clip next to microphone, but the back case misses this one out (presumably to make room for rubber bit on microphone). I had a look at the pink case in the box, this also misses this clip.
Do other peoples phones case sit tight and flush on the top edge? or is my phone maybe wonky!! I worried the numpty who put the tesco sim in has distorted the chasis, or I just have been unlucky.. Its pretty minor, but its dust access so would prefer a tight fit!
FYI, there stock systems are screwed for xmas. Says out of stock everywhere, including when you phone up the store. I went to a tesco Extra, it had lots and lots in stock. Same price as Tesco direct. So, if you still want one for £129, 16GB. Get to your nearest tesco extra, you may well get one if they have a phoneshop instore.
Click to expand...
Click to collapse
The gap is there to allow leverage to get the back cover off. It's annoying that dust can get caught there but it would be a nightmare to remove it if there were no gap. I've had four now from various Tesco stores and they all have this gap, so no need to worry. Just clean out the dust now and again.
I had one which shipped with the case split open like you describe when I first opened it (also 16GB from Tesco).
That phone had a creaky back case - particularly noticeable applying slight pressure to the corner near the speaker. On looking at it I could see the clip on the front of the phone (not the back) was slightly too large, and so you wouldn't be able to fix it with a new back.
Phone went back as it also had a dead pixel in middle of the screen.
I think that the small plastic clips on the front part of the phone can be damaged by not taking the rear of the phone off carefully enough. If they are damaged your phone will always have a loose back, so best not to remove the back too often.
Yes mine is the same and annoyingly someone has used this gap to try and remove the backplate causing it to split at the microphone opening. (2nd hand phone).
So I suggest always removing the backplate from the microUSB end as these are not the sturdiest of backplates.
michael-jb said:
Yes mine is the same and annoyingly someone has used this gap to try and remove the backplate causing it to split at the microphone opening. (2nd hand phone).
So I suggest always removing the backplate from the microUSB end as these are not the sturdiest of backplates.
Click to expand...
Click to collapse
The phones from Tesco include a one page leaflet telling you to put your thumb on the moto logo on the rear and peel it up from the USB, definitely not from the top.
Seeing how flimsy the back is I personally crack open the bottom at the micro USB and then run my fingernail around the gap to pop the back off all the way. The hardest bit to release is the corner above the buttons, which is also where the rear of the case is weakest.
jfinnie said:
The phones from Tesco include a one page leaflet telling you to put your thumb on the moto logo on the rear and peel it up from the USB, definitely not from the top.
Seeing how flimsy the back is I personally crack open the bottom at the micro USB and then run my fingernail around the gap to pop the back off all the way. The hardest bit to release is the corner above the buttons, which is also where the rear of the case is weakest.
Click to expand...
Click to collapse
yea this is how I remove mine. The gap at the top is definitely not there to aid removal of the back. You start from the bottom like you say,
I actually swapped the black back for the pink one included. it fits much much tighter at the top so I think the back can be distorted on poor removal. The downside is I now have a pink phone until I get a replacement
cheers for the responses guys. Good to know its not a problem with my phone as such, just a design quirk..
just got a 16 GB XT1032 from US and i have this same kind of gap in between the body parts on the right side of the audio jack, when the display is facing ground. i freaked out when i found this out. i really expected perfect finishing from motorola.
did someone figure out why is this werid 1mm gap is there or some way to fix it?
Hi guys! I just bought my Moto G from Romania, 16 gb dual sim. Well, today I notice a tiny gap at the right side of the screen, between screen and plastic body. Did anyone else had something similar? The phone it's just great, but I'm a little worried because maybe dust can enter under the screen. I did'nt dropped or something, I just noticed today in the bright light. Thank you
There's no gap in mine. Are you guys making sure that your back cover is completely "snapped" on on all of its sides?
Sent from my XT1034 using Tapatalk
Picture to confirm problem
Hi,
I too have this problem.
Posting a picture
Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Maybe these vids from JerryRigEverything can help you out.
Good luck!
Sent from my HTC U12+ using XDA Labs
https://tinyurl.com/htcu12
Just replaced mine
majomathes said:
Hi guys
Sadly I have a cracked display...so there are no spare parts available and the shops in Germany would like to have something around 500€.
I changed in the past some Sony-Displays and thought about doing myself. I found on aliexpress some U12+Displays.
Sadly I didnt found a single "manual" or how to, to do this right - anyone can help?
Best regards
Click to expand...
Click to collapse
I just replaced mine yesterday and it was more difficult than any other one I've done in the past. Anyway I never found one single video on YouTube that showed the screen removal and pretty much had to play it by ear. There are a few videos that show the disassembly of the U12+ and each stops before removing the screen. My advice is to remove everything from the frame, I managed to piece together enough from the videos to know there are 15 screws to remove, one video said 14 but there's one more that's hidden until you've gotten under the motherboard holding the front facing cameras. Knowing I wanted to keep it simple I didn't remove all of the antenna wires, there's one at the bottom that's under the speaker cover that I left attached so I only disconnected it from the motherboard. Then the other I only disconnected near the vibrator, leaving it connected at the motherboard, so each piece had one wire that stayed connected. Meanwhile you'll have to undo every other plug on the device and with a little persuasion everything fell out. (Don't attempt to remove the button/pressure sensing strips along the sides!) Once you are down to the frame, and for me the ear piece speaker, I used a heat gun to soften the bond between the glass and the frame. It doesn't loosen up very easily, they are really bonded together. I got most of it and then began to chip away at the broken glass. You'll want a good heat gun for this part. I had to set mine to 300F to really get it to loosen up and then work mm by mm around the edge getting all of the glass and glue out of the track. This probably took me a half hour or more. I used E6000 glue but only because I would have had to order B7000 or any other recommended glue. E6000 is a good glue but just because many of the other videos I watched used B7000 I would have liked to use it too.
To install the new screen I used a syringe filled with my glue to follow the small glue track around the edge of the frame. Don't worry about squeeze out because this glue is very forgiving and wipes away easily with IPA Alcohol and a rag. I followed the old glue placement, adding a little extra near the bottom corners and a dab around the ear piece speaker holes. Then it's just reversing the process to assemble the electronics. Now here is another word of warning, the plugs are so small and some are not easy to align but be sure they snap into place and are flat when installed. I made the mistake of not getting the display plug flat and had to do a partial disassembly to correct the issue.
I didn't glue the back on but think I might today just to try and achieve the waterproof level the phone shipped with. You may have to glue yours but I had previously broken the back and already replaced it and the replacement came with a double sided adhesive strip that was still pretty sticky. If I remember correctly the original back was glued on and probably wouldn't have stuck if I had tried to just replace the back as I did.
One other note. After being disassembled and pulling the battery my finger print scanner didn't want to work. In fact it didn't even show up in the menu when I went looking for it but restarting the phone again caused it to show up. My advantage with the double sided adhesive was I was able to test everything and use the phone for a full day before committing to gluing the back on. Now that I know everything is working, the phone is charging and it all seems good I can glue the back on.
Best of luck