I looked all over and didn't find anything regarding this problem on here, or anywhere else online.
Rooted my infuse awhile back, added clockwork mod earlier today successfully. Shortly after, attempted upgrading to jelly bean and fudged it all up.
My phone just shows the Samsung logo upon startup and stays that way for awhile.
After trying to hard reset (holding down the power and volume buttons), the screen that shows up is the attached picture. Its all jumbled and weird.
I can't get into download mode.
Am I screwed or what?
Nope. Not screwed at all. You need to flash gingerbread bootloaders. Do a search and you shall find the procedure.
Sent from my SGH-I997 using xda app-developers app
As the post above says, you need Gingerbread bootloaders. To expand on that, and to get you to where you need to be, take the battery out of your phone and put it back in.
Now that it's off, boot it into CWM: hold down both volume buttons along with home and press the power button. The second you see anything come on the screen, release the power button but continue to hold everything else. Continue to hold these until you see a solid colored background which is CWM.
It may still look very messed up like the picture you posted. Hopefully you'll get a somewhat legible CWM (You should.). Navigate your way to installing the right zip if you have it on your phone. If not, plug in your phone to your computer and go to mounts and storage -> mount USB storage and transfer the right zip onto your phone.
If this fails miserably, do what you can to try to get to download mode. If you do all the right things, chances are it will go into download mode, and at this point it doesn't matter if you can see it or not. If you get here, and ODIN recognizes your phone, you might just want to follow this and start over -- [ODIN][UCLB3] UCLB3 Unbrick - Return to stock.
If you get the Return To Stock going, all you need to do from there to get a more recent ROM going (ICS+) is to get Entropy's CM9 running, which will ensure you are on ICS, enabling you to install Jellybean. If you get this fixed, I recommend CM10.2, Slim Bean, or Beanstalk. Once you get those up and running, you'll love it. The only thing you will have to do (after loving your new phone) is to thank the awesome devs or (even better) donate to these guys that do lots of work for no money.
murdercake said:
As the post above says, you need Gingerbread bootloaders. To expand on that, and to get you to where you need to be, take the battery out of your phone and put it back in.
Now that it's off, boot it into CWM: hold down both volume buttons along with home and press the power button. The second you see anything come on the screen, release the power button but continue to hold everything else. Continue to hold these until you see a solid colored background which is CWM.
It may still look very messed up like the picture you posted. Hopefully you'll get a somewhat legible CWM (You should.). Navigate your way to installing the right zip if you have it on your phone. If not, plug in your phone to your computer and go to mounts and storage -> mount USB storage and transfer the right zip onto your phone.
If this fails miserably, do what you can to try to get to download mode. If you do all the right things, chances are it will go into download mode, and at this point it doesn't matter if you can see it or not. If you get here, and ODIN recognizes your phone, you might just want to follow this and start over -- [ODIN][UCLB3] UCLB3 Unbrick - Return to stock.
If you get the Return To Stock going, all you need to do from there to get a more recent ROM going (ICS+) is to get Entropy's CM9 running, which will ensure you are on ICS, enabling you to install Jellybean. If you get this fixed, I recommend CM10.2, Slim Bean, or Beanstalk. Once you get those up and running, you'll love it. The only thing you will have to do (after loving your new phone) is to thank the awesome devs or (even better) donate to these guys that do lots of work for no money.
Click to expand...
Click to collapse
I appreciate the help. Unfortunately I don't get a legible CWM at all, just what you see in my previous photo. Also, my computer doesn't recognize the phone when I plug it in.
From your help, I understand how to get it working after I can get into the phone's system. I guess my problem now is getting the computer to recognize that its plugged in. It seems going into the CWM (holding volume and power) just keeps giving me the same screen. even if I scroll blindly and try to pick options, nothing happens.
Good luck
Please go and learn the unbrick Odin to stock GB with root guide first.This it's your key!
The unbrick tool guide mentionned in the previous replies is the working and proven tool, but first you must be in download mode.
It's a must to FIRST download and install Samsung Kies on your PC for the drivers or else your phone won't connect (vol Up,vol down simultaneously together while connecting to PC via USB)
Follow the Odin guide in the previous reply step by step and with a cool mind.Don't stress!!!
Try searching for the real download mode procedure as I forgot it.It's found in the unbrick guide mentioned.
If you still can't be in download mode, search the Web a lot and try to do this:
Let your phone battery die out (leave the screen on till it dies or try restarting a few times to let it die.Remove battery.
Forget the phone for a whole day.
Then try to put it back to download mode on your PC.No need to put battery back.The phone will switch on!
But first learn the unbrick Odin to stock guide as it's the whole key to your problem!
If you succeeded, then here is your first step to flash a ROM.
This is a thread for a working CWM on infuse.I used the 04.30 1.2GHz version and you can install it without going into recovery mode using SGS Kernel Flasher in play store for free:
forum.xda-developers.com/showthread.php?p=25724638
---------- Post added at 07:32 PM ---------- Previous post was at 07:22 PM ----------
forum.xda-developers.co...hp?t=1776129
I followed the above instructions and upgraded the Samsung galaxy infuse 4G from gingerbread 2.3 to Android Jelly Bean 4.3.
It will be difficult for you to do unless you know computers well. You will need 1 to 3 hours to complete.
Every single little step must be followed, pretty much fill in every single step.
First you must obtain CWM, it's a flashing utility which is accessed at boot up by holding Volume up + volume down + power
Phase 1:
---------
To obtain CWM head over too Jscotts odin url.
1. download the file which includes root access.
"Stock UCLB3 with root
UCLB3_Unbrick_root_1.1.zip"
2. you will also need Samsung Kies, which will install the usb driver for your Samsung galaxy. The link is on the website.
3. Place your phone into Download mode
To do this, have your usb cable for your phone plugged into the computer but disconnected from your phone. shut off your phone. When the power is off press Volume up and Volume down simultaneously, after the buttons are pressed plug in the usb cable at the same time, which should be connected to the computer.
This will place the phone in Download mode.
4. open the included Odin.exe, when you see the yellow bar under ID:COM then everything is good.
Follow the rest of the instructions on jscotts website.
Finally when this procces is done, reboot into android.
Phase 2:
---------
1) Download SGS kernel flasher
2) Click on the link on jscotts website to download a stock kernel which contains CWM. use "2013.04.30-CWM-Synthesis-1.2Ghz.zip
Phase 3:
----------
description:
Convert the phone from gingerbread 2.3 to ICS Android 4.0, as the instructions say.
Head over too: Entropy's CM9 website:
forum.xda-developers.co...hp?t=1601844
1) There are 3 links on the website for Cynogen 9 rom for Samsung infusion 4g, any one is ok. Download CG9 for Samsung infusion 4g. version along with the Gapps.
2) After saving both zip's on your sd internal memory, shut off your phone. Press both volume up and volume down and power at the same time.
The phone will boot into CWM.
3) Make a backup of your original rom for your phone before proceeding.
4) Select Flash zip, select your ICS android 4.0 rom which you saved on your internal sd. (ie: "cm-9-20120620-UNOFFICIAL-infuse4g.zip"
5) Install GAPPS as well, after step 4 is complete.
Again for the full instructions please follow the instructions on "Firmware][ICS]UNOFFICIAL CM9 for the Infuse 4G (07/28/2012)"
Phase 4
--------
1. Boot into CWM again buy pressing Volume up + Volume Down + power.
2•Install ROM: Scroll down for downloads section
•... The package will start to install..
•... Phone will reboot into the install screen again...
•... Continue to install [Automatically] If not manually flash again
•... Phone will reboot again and be at the recovery screen...
3. Install Gapps
4. •CWM: Wipe Cache Partition
5. •CWM: Advanced/Wipe Dalvik Cache
6. •Reboot
FINISH.
Fullmetal Jun said:
Please go and learn the unbrick Odin to stock GB with root guide first.This it's your key!
The unbrick tool guide mentionned in the previous replies is the working and proven tool, but first you must be in download mode.
It's a must to FIRST download and install Samsung Kies on your PC for the drivers or else your phone won't connect (vol Up,vol down simultaneously together while connecting to PC via USB)
Follow the Odin guide in the previous reply step by step and with a cool mind.Don't stress!!!
Try searching for the real download mode procedure as I forgot it.It's found in the unbrick guide mentioned.
If you still can't be in download mode, search the Web a lot and try to do this:
Let your phone battery die out (leave the screen on till it dies or try restarting a few times to let it die.Remove battery.
Forget the phone for a whole day.
Then try to put it back to download mode on your PC.No need to put battery back.The phone will switch on!
But first learn the unbrick Odin to stock guide as it's the whole key to your problem!
Click to expand...
Click to collapse
Thank you! I will attempt this when I get home from work and see what happens.
Related
The phone is bricked. I flashed to the i9000 firmware and was about to root the phone and didn't bother to flash the new kernel yet. I get into recovery to go to reinstall packages to install the root, and to my surprise the power button didn't work to select since I had the wrong kernel. SO I do adb reboot download and then I try to flash the new kernel. Odin just freezes there and doesn't do anything, I unplug the data cable and then it says FAIL! on Odin. I take out the battery and put it back in to see if the phone will still boot, and now I'm stuck on the phone/computer. People have tried helping and they told me about every single key combo to put it in download and none of them work. When I told Vol+ and power the screen flashes black and then I wait for it to do it the second time and i let go of the power and it stays there at phone/computer. I've done everything I can possibly see to do it and this is my last hope to get it to work again, or else I have to take it to AT&T and lose all my stuff on the internal SDcard.
EDIT: AT&T refuses to replace the phone.
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
http://forum.xda-developers.com/showthread.php?t=731989
designgears said:
WARNING: "MASTER CLEAR" WILL WIPE YOUR BUILT-IN STORAGE!
I am not responsible for any damage caused to your device.
What is this?:
If you see the "phone+!+computer" screen, you need this! If you deleted something you shouldn't have and can't get it back on your phone, this is probably your best bet. This is the Odin3 One-Click Downloader for restoring your phone from a completely software bricked state, or for whatever purpose you see fit to use it for. You don't have to change any settings, it is all pre-packaged and ready to go.
If this has helped you out, please consider buying me a beer!
How to use:
Download and install the correct drivers below (mac and linux don't need drivers)
Plug in your usb cable to your phone and computer
Open Odin
Enter Download Mode (see below)
Click Start
Be Patient, the first boot will take a while
How to use Master Clear:
Boot your phone up normally with usb debugging on
Click Master Clear
How to enter download mode:
Method 1ADB - from recovery or normally booted with usb debugging on)
Open a cmd prompt/console/shell
adb shell
adb reboot download
Method 2KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold Volume Up + Volume Down + Power
Method 3KEY COMBO)
Remove the battery, sim card, sdcard if you have one
Insert the battery
Hold both Volume buttons (from i9000 just down, don't touch the power button)
Plug in the USB cable and continue holding both Volume buttons
Drivers:
Windows 64bit
Windows 32bit
I897UCJF6 - Odin3 One-Click Downloader:
http://www.thevod.org/misc/captivate/I897UCJF6-final-OCD-REV0.rar
The internal beta's are NOT one-click, please read the linked threads
UPDATE: I897UCJH2 (Internal BETA)
You can get it here
UPDATE: I897UCJH3 (Internal BETA)
You can get it here
Click to expand...
Click to collapse
deuX` said:
From designgears' one click Odin thread. Not sure if you tried this, but it might work.
Good luck.
EDIT: realized it might be helpful if I included the link to the actual thread. Sorry about that.
Click to expand...
Click to collapse
Yeah I've tried this already. Nothing will work.
Is there anyone that can help X_x
what did you tell att and what did they say?
di11igaf said:
what did you tell att and what did they say?
Click to expand...
Click to collapse
"We can't replace the phone since you are not the original buyer of the phone. Talk to the person you traded with to get the receipt"
Apparently my phone was stolen because when I mention the receipt, he doesn't reply.
Phone is stuck on att white world phone logo and is not going to download mode by holding the volume buttons and power, and or volume down and power.
When i hold the buttons and plug it in and all i see is a damn battery that goes on then off. Odin is open and does seem change.
All this just to get some bloatware and fix a gps.
Try the third option which is the only one works for me:
1. Take battery out and put back
2. Hold both Vol buttons. Don't touch the power button.
3. Plug in the USB cable to your PC. Don't touch the power button.
Your phone should boot into download mode right away. Remember, don't ever touch the power button.
WOW
wow dude perfect you saved me from freaking out! hah SOLVED thanks a million bad power button!
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
foxbat121 said:
You're welcome. There is now even another hardware hack that can force the phone into download mode even if none of the buttons work. It is posted in i9000 forum.
Click to expand...
Click to collapse
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Just do a search for captivate jig
kang0saur said:
do you mind posting a link plz?
no button configuration is putting my phone in d/l mode...
tried odin for the first time and now i can't get past the damn 'world phone' screen.
Click to expand...
Click to collapse
Look in my sig.
Entering Download Mode but odin not working
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
evedavis58 said:
I can get in to download mode but when I open odin3 there is nothing in the text boxes and when I press start it just says all threads completed 0/0 failed. And does the same thing for master clear.
When I turn the phone on with SIM in and hold the up/down + power it enters the clockwork stuff and I have tried the restore default option and recovery option. I was hoping download mode would help but didn't.
If anybody can help it would be much appreciated.
Thanks
Click to expand...
Click to collapse
Here is the procedure you need to follow:
1. Install the proper driver so that ODIN can see your phone when plugged in. Drivers are listed in the thread where you download ODIN.
2. Open ODIN with phone not attached. Select the firmware file (*.rar) you want to flash in PDA field.
3. Power off the phone and enter into download mode and connect the phone to PC.
4. Wait for the driver to install and your phone recognized. It will show up in one of the boxes in ODIN.
5. Once your phone is recognized, press Start button on ODIN to start the flash process.
6. Leave the PC and phone alone for a few minutes and pray (that your phone didn't get bricked in the process).
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Cog does not use Odin. Just get clockwork recovery and install it. Then boot into recovery and flash cog. Go to stickies in dev section, there are guides.
I try to select cognition.rar but says it needs a .tar file. What do I do to make it work?
Cog does not install with Odin unless dg added that. You need to unrar it. Download winrar and extract it, see what's inside.
Sent from my Captivate using XDA App
This guide lays it out pretty well. http://forum.xda-developers.com/showthread.php?t=884364
Personally, here's what I use to do. Go to the Dev section and search for ClockworkMod Recovery. Search that thread for the update.zip. I'm sure it's in there. Put the update.zip on your internal storage, ie, when you plug phone into pc with USB the thing you mount and store file on, not an added SD card.
Boot into stock recovery. Choose reinstall packages, it reboots. Choose reinstall packages again, now your in Clockwork. Choose > install zip from sdcard > choose zip file > then navigate to Cognition (assuming you've put that on your internal storage also) and select it. It flashes, choose reboot. Bam! You're running Cognition.
evedavis58 said:
Ok I got it to recognize but I don't know what (*.rar) I am supposed to flash. Do i just put the cognition folder in it or what.
Thanks for the reply
Click to expand...
Click to collapse
evedavis58 said:
I want to flash cognition but when i press pdf on odin3 it doesn't see it...any ideas?
Click to expand...
Click to collapse
You two need to read more before risking your phone. I sense you soon to have two very expensive bricks on your hand.
I was trying to flash my captivate with adb reboot download and the battery fell out in download mode. I tried volume +/- to fix but no luck! Please help me! Stuck at Phone warning sign computer screen!
odin1click? volumeupdown + insert usb, open odin1click click go.
should fix it.
cerjam said:
odin1click? volumeupdown + insert usb, open odin1click click go.
should fix it.
Click to expand...
Click to collapse
Doesn't go into download mode at all! Just shows the corrupted firmware every time I try it.
can you get a adb connection?
cerjam said:
can you get a adb connection?
Click to expand...
Click to collapse
No, computer doesn't recognize it. If I had an ADB connection, I'd adb reboot download but when I try adb, it says no device found.
try plugging in usb with the battery out and then holding vol+- and inserting the battery while holding the volume buttons if not you need to make a jig.
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
I'm probably just going to go to AT&T tomorrow and get them to exchange it if I can't get it to get into download mode tonight.
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Didn't work, this used to work for me but now no luck. I don't know why it just stopped going into download mode.
Could you usb connect to PC on debug mode? Is this connecton visible from your PC?
aggielover said:
I was trying to flash my captivate with adb reboot download and the battery fell out in download mode. I tried volume +/- to fix but no luck! Please help me! Stuck at Phone warning sign computer screen!
Click to expand...
Click to collapse
That's a semi-bricked screen. No, normal method to go into download mode won't work in this state.
There are instructions to recover from this state into download mode. I have posted a few links in the past but don't have it right now. IIRC, you need to hold both vol buttons and Power button and wait until screen goes blank twice before release the power button so that your phone could go into download mode.
The other way is to rig a microUSB plug with a 301k resistor connected between pin5 and one of the data pin. This will put your phone instantly into download mode. There is a thread dedicated for this. Search.
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Thank you, this worked for me!
aggielover said:
norcal einstein said:
I've had success with this method to get into Download Mode:
1. Remove battery, SIM and microSD from phone (if you have one)
2. Wait at least 10 seconds with the phone in this state
3. Plug your phone into your computer (this step has always been optional for me)
4. Hold Volume Up/Down, don't let go!
5. While holding both volume keys, insert the battery
If it worked, you should almost instantly be in Download Mode. I've omitted step 3 and still had success using those steps on my batch 1007 phone. In general, I get my phone into Download Mode first, and then plug it into the computer.
Click to expand...
Click to collapse
Didn't work, this used to work for me but now no luck. I don't know why it just stopped going into download mode.
Click to expand...
Click to collapse
I've been having the same issue and none of the methods mentioned on the forums have worked. I recently updated to a custom 2.2.1 rom (Paragon) and when I tried to flash back to stock with odin (afterwards), it gave me the finger (got stuck in the process). I tried to unplug and plug back in the usb, restart odin, pc, reinstall drivers (none of which helped). So my dumbarse decided to take the battery out to reboot the phone. Usually after doing so in the past, I've been able to manually get into download mode using the 3 button combo, but haven't been able to so far. I haven't tried making a jig yet, knowing me, I might seriously break something that way.
I was reading somewhere that 2.2.1 breaks the 3 button combo (along with 1 click root for that matter). Just wondering if there is anything else I can try or should I just make a jig? Should I take it in to AT&T and see if they can do something or should I call them? Just wanting some advice from the Gurus here.
edit: and "no, I can't do it through ADB or I would've already".
jig it up
xrCore said:
Thank you, this worked for me!
Click to expand...
Click to collapse
was going to suggest the same....thats only happened once (after install of gingerbread alpha) but that was the only thing that worked....the download screen literally jolted on the instant the battery connectors touched.
darthdave said:
I was reading somewhere that 2.2.1 breaks the 3 button combo (along with 1 click root for that matter). Just wondering if there is anything else I can try or should I just make a jig? Should I take it in to AT&T and see if they can do something or should I call them? Just wanting some advice from the Gurus here.
edit: and "no, I can't do it through ADB or I would've already".
Click to expand...
Click to collapse
2.2.1 puts the 3-button setup to whatever the i9000 uses, which is different from the Captivate. Nobody's made a fix yet AFAIK.
for me i managed to get it into download mode, BUT, when i try running Odin it's stuck at "DO NOT TURN OFF TARGET!!"
any thoughts?
Lawliet L Ryuzaki said:
for me i managed to get it into download mode, BUT, when i try running Odin it's stuck at "DO NOT TURN OFF TARGET!!"
any thoughts?
Click to expand...
Click to collapse
What build is your phone, located under battery. Something like 1010
Search for Sparkfun in the dev forum for Captivate. Easy to make jig (that's been mentioned before) that will get you out of the woods.
I am having issues getting into download mode myself. Samsung Captivate SGH-I897. I just got it less than two weeks ago. Played with some of the features. Did the root. Did the ROM manager. Everything I needed to do to have Serendipity 5.12 installed. Did it. worked great. Was missing some of the apps I enjoyed from the gate(Samsung EMail). So i read up that u could make a custom Serendipity in the kitchen.
Put the phone to JH6 from Odin. Also did the master clear. So now I am at 2.1 update 1 from Odin.
However, Now I cant get Clockwork Recovery at all ( when option is selected it goes to default recovery every single time ). I did try to re-install the correct flash for Clockwork, same results.
So, i thought maybe something didnt copy or flash or clear correctly and was going to do an Odin procedure again, cant get into download mode now. NOT AT ALL.
The phone will just re-boot into JH6. It operates normally, however I can shake JH6. No download mode. No Clockwork recovery.
I am noob, I am a quick hands on learner though. Not even sure if this will get the response desired.
I followed the following instructions on the serendipity website but after going through steps 1-12, I ended up with an unrooted Samsung GT-I9000 2.3.3 which cannot be rooted with SuperOneClick 1.9.5 (using both GingerBreak and psneuter). Since the last portion of the installation requires CWM Recovery, I think this might not work.
I am pretty sure that somebody is going to scold me for posting this thread with the answer right in front of me; I swear that I tried looking for somebody who had this same problem, but couldn't find anything remotely close.
On a side note, this phone is a Samsung Captivate. When I did the first instance of Odin, I pressed volume up and down at the same time to get into download mode. When I did it the second time (after it had been upgraded to the GT-I9000), I had to press power and down volume to get to Download, so I'm pretty sure the version of phone has changed.
I don't know what I did wrong in the instructions; I would have posted this to this thread, but xda-developers won't let me post to the developer section. I couldn't find anyone else with the same problem. Please help. Thank you. (This is non-vital, the phone still works and I'm able to send/receive calls, but for some reason the home button doesn't work. I can live without that for a few days)
Installation:
1. Download this package.
2. Open Odin3 1.7.
3. Select the PDA, PHONE, CSC, and PIT files in their correct spots.
4. Connect phone in download mode. Use a USB port that's on your motherboard (the ones on the back of the computer). Use the Samsung USB cable.
5. Ensure that Auto-reboot and Re-Partition are both checked. These have a tendency to change after plugging the phone in, so double check them.
6. This is where the bootloader will be flashed, along with stock Gingerbread. Hit Start.
7. Allow the phone to boot.
8. Close Odin3, and open a fresh one. Select Reorient_Kernel_1.1 in the PDA box.
9. Reboot into download mode (adb reboot download, or hold Vol Down + Power).
10. Plug the phone into the computer.
11. MAKE SURE RE-PARTITION IS NOT CHECKED. If it is, you'll soft-brick and have to start over.
12. Flash the kernel (hit start). Allow the phone to reboot.
~IF YOU ARE CURRENTLY ON A SAMSUNG-BASED GINGERBREAD ROM WITH BOOTLOADERS (NOT CM or MIUI), START HERE~
13. Place the ROM .zip (You know, the one you downloaded from the giant link up there) onto the SD Card.
14. Reboot into Recovery (adb reboot recovery, or Vol Up + Power).
15. Flash ROM with CWM.
16. Enjoy!
Note, you will get some popup at start about not having network time. Just hit cancel and pretend it never popped up.
if u did step 11 and 12 you should have the reoriented kernel installed and hold vol up+power to get into cwm recovery mode and choose install from zip option, choose the zip which should be on ur sd card before. then u can flash S7 .zip and wham ban thank you ma'am u got it done
There is a Serendipity sticky in the Q&A subforum where questions like this should be posted. Please use the sticky before starting a new thread in the wrong forum.
I would post this in the Q&A or General section, but since those flashing something else than stock come most frequently to this section, I thought that I would post it here.
With that being said, here we go.
I am hoping to clear up the situations when you should just flash a kernel and when you fully re-stock your phone to get it to do what you need it to.
Materials needed:
Odin/Heimdal (search up there ^ & > ) you know where. You're not a noob right?
GTG's or other return to stock tar or zip.
Any working kernel with CWM (red is the norm here in the Infuse forum)
Your favorite rom/kernel/other additions.....
If you have a situation like our good friend ee23hd2 here, you need to know how to get out of it. The following information is what I've picked up during my time of having a Captivate and softbricking it frequently. (lost count, but my Infuse has only been softbricked a handful of times in comparison)
In the situation above, the best course of action would be to get any kernel (I keep a zImage of my 1.5 kernel [yes Froyo]) for just these situations) and put your phone into download mode (phone off, hold both vol keys and plug in USB) and flash a kernel onto the phone to be able to reach recovery. Then you may proceed with flashing whatever else you need.
The ONLY time you should need to fully restore your phone is if you have a situation like I did over the weekend... My phone did not recognize my internal SD (it would read it the first time, but then say it was not able to be recognized) and also if I unmounted ANY of my partitions in the mounts section, they would not remount. Situations like this are certain time to reflash to stock and even possibly repartition with appropriate pit as I did. I booted once to make sure that I was working, then I put it back into download mode, flashed one of my kernels onto it, went into recovery mode and went back to crackflashing.
As a review... Any bootloop can be solved in most circumstances with the following:
1. Pull battery,
2. Download Mode (hold both vol keys, plug in USB)
3. Flash ANY working CWM kernel
4. Flash your stuff back on the phone.
If this does not work, then
5. Repeat 1&2,
6. Flash back to stock.
I hope this has been of use to you.
P.S.: always useful commands for those who are ADB able, 'adb reboot recovery' and 'adb reboot download'
A few small comments/missing steps:
1) After Odining a kernel with working CWM, you need to do the following to enter CWM:
If phone is OFF:
Hold VolUp + VolDn + Power. Let go of Power once you see the Samsung logo. Continue to hold VolUp + VolDn for at least 5-10 seconds then let go. You should enter CWM when you let go.
If phone is ON and stuck at the Samsung logo:
Hold VolUp + VolDn + Power for 10-15 seconds, you should see the Samsung logo blink. Release power after 2-3 more seconds, continue holding VolUp + VolDn for another 5-10. If it fails try again or pull/reinsert battery then perform the Phone OFF steps - this can be a bit finicky.
2) The above steps only work if whatever you are flashing contains a correct kernel. Most full ROM ZIPs do, but just in case, try to find a kernel that is compatible with whatever you intend to flash.
3) Make sure to do a "Wipe Data/Factory Reset" in CWM after you flash your stuff.
Also note that if you're flashing TO Cyanogenmod 7, there are a few extra steps you need to perform from Orange CWM that are listed in the first post of his CM7 thread. These steps don't apply to people going between Samsung-derived ROMs.
The basic process for flashing a kernel with heimdall is as follows:
Code:
heimdall flash --kernel zImage
Google searching can help you with Heimdall installation - it's REALLY easy in Ubuntu, I think it's easy in Windows too but I can't help you there.
You can obtain zImage from the updates/ directory of whatever ROM ZIP you're trying to flash. If you're going for Hellraiser, use the zImage from Hellraiser, not from the Captivate/i9000 ROM.
Good Post!
Now comes the tricky step....
1. Please read and follow the directions above!!!!
Sticky and lock so no spam gets posted
Sent from my SGH-I997 using xda premium