Related
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
I don't have it, but I can look into it...
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
FlynnErik said:
My device is rooted, and the only backup I made with CWM was after I rooted, if I go to update (if my device can find it) will I:
1) Brick out and be screwed?
2) Have to flash my backup (which is rooted, so would that mean I can't update again?)
3) Be ok and keep my rooting?
4) Be ok, and lose my rooting, and have to re-root?
I realize I am kind of answering your question with a question, but I would be happy to see if I can track it down and see what changes there are, if it's safe to install.
Click to expand...
Click to collapse
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
I did a back up after I rooted with CWM
Bibicp said:
Try backing up your system using clockworkmod recovery first, then go to download mode, flash your firmware version (download from samfirmware or samsung-updates) and flash it with odin.
This way you're unrooted, running stock rom and stock recovery and then you can install the update.
I didn't try to install an update while rooted, but it's not recommended so don't try.
Click to expand...
Click to collapse
So is my backup going to be rooted? Or will it be the stock? I am currently rooted stock 4.0.4.
Btw, I have found no information about the update anywhere on the net. Maybe they accidently did a push to us, and pulled it back?
Should I wipe cache, dalvik and FDR before I flash the firmware from those sites or use the backup I made already? (which I am unsure if I should even use since idk if it will be rooted or not lol)
I wasn't going to update till it was time to get JB, but this update that vanished is intriguing enough I might lol
As i know yes when you restore backup with cwm the result will be rooted also as the cwm takes image of the system when doing backup and as you when doing backup was rooted so when restore this backup you will be still rooted if you flash via odin no need to wipe cash and dalvik cash i never read anyone doing this
Even if you do this wipe no harm at all
Sent from my GT-I9100 using xda app-developers app
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
There's several reasons why this may happen
Bibicp said:
As mohamed selim said, but wipe your data and do a factory reset in clockworkmod (after backup)
and why will samsung pull back the update?
Click to expand...
Click to collapse
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
FlynnErik said:
They pushed it out to the wrong devices
They pushed it out to early
They found a last minute bug and had to pull back
They are testing it, and not everyone should have gotten the option to get it.
Ok so to get things straight. If/when we go to JB I will need to download a firmware stock from one of the sites listed above, download it.
Do a backup (just to be safe of what I have now)
FDR/Wipe everything
Install the firmware using Odin
If everything looks good, re-flash CWM
Do another backup so I have a clean stock to revert back to down the road if needed.
That sum it up correctly? This way I can bookmark this thread so I don't forget lol.
**EDIT** When I use Odin to restore stock will I lose CWM? If so, what happens if something goes wrong in the Odin restore and I have a boot loop, or etc, what would be my next move since I won't have CWM to restore previous, would I be able to install it like I would if things were going ok?
Sorry for sounding like a n00b, I am still learning all about this, but I think I am getting closer to learning enough to not be a n00b lol. I only have 10 tabs open with this forum instead of 20!
Click to expand...
Click to collapse
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Awesome!
Bibicp said:
It's not for the wrong device since it's saying P3113, and it's not jelly bean. as I've seen on samsung firmware.com it's 4.0.4.
Well, on my homescreen I put a shortcut for the software update, it still has a circle saying 'N" on it (which probably stands for new), but going in kies I don't find it, It only says it downloaded it but the firmware is up to date.
So probably either they really pulled it back, or it's a bug and they're fixing it. (I really can't wait for jelly bean)
Second, yes it will erase the CWM recovery and go back to stock recovery.
The common mistake people make to get a bootlop is not wiping data/doing a factory reset before flashing a new ROM, so you should go to recovery and do a factory reset, then go to download mode and flash the firmware with odin. If you ever get stuck in a bootloop, try pressing volume down + power key to get to download mode and re flash the ROM. if it's still stuck, try re-downloading the ROM files you downloaded, it could be corrupted.
Click to expand...
Click to collapse
So the one on the site even though its XAR is us? Can I ask why we have that tag? Not something like US or etc? I mean I don't care, just kinda curious since that would make it more simple to know which region gets what, at least for me it would lol.
Thank you so much for the help and the knowledge, I figured I would end up with stock recovery, which is why I wanted to make sure about what if something goes wrong.
As a side thought, where does the backup that CWM makes located? Can I copy and paste that on to my PC so I always have a back up handy? (I would sync it into the cloud). Can I flash that with odin down the road? Or is that only a CWM usable file?
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Gizmo said:
Any more info on the firmware release?....Trying to download it now!
Firmware Version: P3113UEBLH1
OS: Ice Cream Sandwich
OS Version: v4.0.4
Release Date: 08-10-2012
Build Date: 08-10-2012
Changelist: 999349
Click to expand...
Click to collapse
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Bibicp said:
That's all I know about it, where are you downloading it? samsung updates.com? or kies/OTA update?
Click to expand...
Click to collapse
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Gizmo said:
I found it on some foreign site....samsung-updates.com won't let you download the P3113UEBLH1 firmware, Just the Kernel, I don't use Kies! Uploading it right now!
Click to expand...
Click to collapse
Alright, tell me if you notice anything different.
Nice
good!
Im downloading it now. Ill post it when its rooted and deodexed
Bibicp said:
I've noticed there was an update on kies this week (P3113UEBLH1), I'm not sure what it was thought.
I've tried upgrading in kies, it was stuck at 0% downloading then connection timed out.
The OTA update didn't find any updates available.
Then next morning, kies said no update available too.
So, Anyone got the update to work, and if so what changes did you notice?
The update is available for flashing with odin on samsung-updates.com , this is the 2nd 4.0.4 update. (I'm still running the old 4.0.4 (P3113UEBLG5))
Click to expand...
Click to collapse
I tried updating it once with KIES and it got to a point and froze on the screen. I had to force the tablet to shut down and rebooted and the tablet was OK. Being a glutton for punishment I tried again with KIES and the LH1 update successfully updated my GT2 7 and the About screen confirms it. Directly after installing and rebooting I started getting error messages about Chrome crashing. I uninstalled Chrome browser and reinstalled it and all is well. No other problems. Do NOT really notice ANY difference at all.
The only problem I have is that NOW I have decided that I would like to root my GT2 7 and I am NOT sure the methods I see out there will work with the P3113UEBLH1 update.
Does anyone know if my GT2 7 - P3113UEBLH1 can be rooted safely??
grobin
I dont think IT is better than CM9
RomsWell said:
Im downloading it now. Ill post it when its rooted and deodexed
Click to expand...
Click to collapse
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Bibicp said:
Can you please tell me what's different than the older UEBLG5 version? and btw can you upload the stock rom itself without root so I can test it? because I couldn't download :s
EDIT: I downloaded it via samsung-updates.com and flashed it with odin.
It's pretty much the same as UEBLG5 I didn't notice anything different, but I downgraded to UEBLG5 as samsung appears to have pushed back this update (UEBLH1), because when I connect the device to kies, it doesn't recognize it.
Click to expand...
Click to collapse
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
RomsWell said:
I think it broke wifi. Not sure what the change log says about it. If the Cam is fixed i think im just going to add it to the G5 update. And not bother posting this untill its confrimed OTA
Click to expand...
Click to collapse
Sorry for the question, but what do you mean comfirmed OTA? Once kies told me about the UEBLG5 update, I couldn't install it with kies as it was lagging.
Next day I found it on the OTA update.
This one showed on kies for a day, then next day neither kies or the OTA udpates showed there was an update so it probably got pulled back?
I have been searching on the forum and Google but no answer. I had a Sprint Galaxy S3 and it was rooted with custom recovery Clockworkmod. After an update was available I could not install the update, failing with the message "verification failed" when trying to apply the official update file. I couldn't find an answer so I went back to stock recovery.
Now I have a verizon S3 and I would like to back up an image of my phone with clockworkmod but I would like to be able to update, especially with the looming jellybean update coming soon. Did I miss a way to install the updates to the official rom with clockworkmod? Or was it simply not possible.
moreisbetter said:
I have been searching on the forum and Google but no answer. I had a Sprint Galaxy S3 and it was rooted with custom recovery Clockworkmod. After an update was available I could not install the update, failing with the message "verification failed" when trying to apply the official update file. I couldn't find an answer so I went back to stock recovery.
Now I have a verizon S3 and I would like to back up an image of my phone with clockworkmod but I would like to be able to update, especially with the looming jellybean update coming soon. Did I miss a way to install the updates to the official rom with clockworkmod? Or was it simply not possible.
Click to expand...
Click to collapse
With most custom Roms...being able to do OTA updates is blocked because it could interfere with the rooted Rom you are running...its more or less a safety feature for that purpose. If you want to get the new Jelly Bean OTA update, you will have to flash your device back to unrooted stock and it should work just fine...as long as ur rooted, you wont be able to, if im not mistaken.
Thats true, and there is the whole bootloader thing! Now that we have all hacked away our bootloaders, the OTA just won't happen. Hopefully an easy relock becomes available for the vzws3 before that update is released, but I wouldn't panic - big red will probably release it to us after everyone else has gotten it and out phones are outdated! In general though, within a week or two of an official large release, the amazing devs on this site will have a downloadable version available for us to manually install.
If you have modded your phone, never try to take a OTA update. At the least you will lose root abilities. At the worst, potential bricking of your device.
Usually before, lol, if not just after a OTA, the devs have working release for our devices.
Take it easy, relax.
I am on stock 4.1.2, VRBMB1. I am rooted, unlocked and with TWRP recovery. I have used Titanium to freeze SDM 1.0.
I am considering going to VRBMF1. I don't know how to safely get there. I also don't know what improvements might come with the OTA to MF1. Should I just hang out with VRBMB1 until the rumored update to 4.3 arrives? I would like to be in the position to return to what I have now (just in case), or be able to move to 4.3 if, and when, it come out. How do I proceed? Thanks
I have the same question... subscribed!
Is there a rooted/unlocked update file, or do I just run the VZ update and use Voodoo rootkeeper to restore root (or Casual unlock again, if needed)? Or dirty-flash one of the rooted/unlocked stock ROMs (and then the firmwares)?
So many ways to get there, just looking for the safest... I figure the VZ update might be best.
So, I finally bit the bullet. I backed up all kinds of things before running, but it seems I didn't need to. I unfroze SDM, and then checked for updates. It downloaded and then rebooted to install. Since CWM was installed, it tried to perform the update, gave a few errors, but I let it go anyway. After the main install was done, CWM asked me if I want to let the updater install a new (stock) recovery - I said no. Then it said that I may have lost root, so do I want CWM to fix it - I said yes. Then I cleared the cache (just in case) and rebooted. The phone booted up, said it completed the upgrade, and then dropped me back into the rooted OS. Pretty cool.
SDM did complain to say that the updated "didn't happen" but the phone shows the new MF1 version, and a few new apps as well. So, obviously, the update happened... and I didn't lose root or recovery. Damn nice...
I wonder if TWRP does the same things (disable the stock recovery and restoring root)...?
EDIT: Reading the TWRP page says that they don't support nor recommend applying a stock ROM update.
Secondly, I found that while my phone was working fine, when I tried to get into recovery, it popped up the unauthorized software error. Meh. I used the Casual rooting tool to reroot, apply the insecure aboot, and then reapply CWM... and I'm back to normal now. Not a big deal, but still more steps than I thought I needed above!
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Try putting twrp back on and flashing stock Lollipop Rom. http://forum.xda-developers.com/moto-g/development/rom-stock-motorola-lollipop-rom-t3017510 You can also try aosp, cm12.1 or any other lollipop ROM.
The Lollipop OTA is very picky, I believe any modifications to the stock firmware will cause the update to fail. You will need to have a completely stock system for the OTA to install successfully. Find the correct KitKat firmware for your phone and flash it then try upgrading.
Hi.
I'm having a similar problem with te OTA being picky (topic here).
Is there a stock firmware "file map" so that we can check manually what is wrong and erase/add needed files ?
Maybe this could be done by checking a flashable stock rom ?
Thanks a lot guys.
EDIT : Found a solution here http://forum.xda-developers.com/mot...osing-apps-t2979971/post57658072#post57658072.
Worked perfectly !
OP, I am in the same situation. I did the same as you, and got the same results. Have you managed to solve it? It would be nice if you tell what you decide to do and what's the outcome. Thanks!
tomisalunatic said:
Alright so I have a 2013 Moto G, and basically in the past while on KitKat I've rooted my phone, given it custom recovery (TWRP), and messed around with the ROM (changed it to CM, PA and a few others and back). Now I've come to update to Lollipop and of course I need stock recovery to update my phone via OTA, and when it first prompted me to update, I had TWRP and I didn't really think, I just updated, this sent my phone into a bootloop, rebooting straight into TWRP every time I turned my phone on. Luckily I had a backup and I just restored to that and that fixed it. Recently I've been trying to fix the correct stock recovery for my phone so I can update, and I found some MotoTool AIO thing, and that changed my recovery back to KitKat stock (or so it says), now when I go into recovery it LOOKS like stock, can do everything you could normally do with stock recovery, but when I came to update it, about a quarter of the way though the update process, it errors and reboots my phone. Luckily this time my phone recognizes it has errored and just cancels the update instead of sending me into a boorloop. Any help would be greatly appreciated.
Thank you,
Tom.
Click to expand...
Click to collapse
Update to 5.1 success..... erm, well it's all relative
Eventually managed to update my XT1039 to 5.1 via ota.
Started with a fully charged phone and flashed 4.4.4 stock firmware (http://forum.xda-developers.com/moto-g/4g-development/xt1039-moto-g-4g-stock-firmware-kxb21-t2805619).
Once completed, powered up phone and signed into google play then updated the motorola update services app.
DO NOT install a custom recovery or root yet or the update will fail!
Start the update by going into settings/about phone/system updates.
After first boot into 5.1, do a factory reset.
To root once the upgrade is completed, download cf autoroot (http://forum.xda-developers.com/moto-g/4g-development/root-xt1039-cf-auto-root-peregrine-t2942406) and unzip to a folder on your pc. Open a command prompt and change directory to this folder. Powerup handset in bootloader mode (hold vol down while switching on), connect USB and run 'root-windows.bat' from the command prompt.
So far I'm hugely disappointed in the update as I use WiFi tethering alot and it appears to be a massive fail. I know it wasn't 100% in 4.4.4 or CM12 5.1 with both reqiuring an occasional reboot, but in 5.1, something's just not right and it's basically unusable (could it be updated radio or something?). Fortunately, USB tethering appears flawless.
Another obsrvation seems to be abscence of a + appearing in the HSPA signal indicator, I seem to be getting just the H appearing regardless.
Also no more bluetooth visibilty timeout setting.
After installing CWM 6.0.5.0, I got gliches with the display in recovery mode but it works.
Now after I have it rooted, ad free and de-bloated, fixed the power on logo and installed CWM 6.0.5.0, I'll stick with it for a while to just to see how the battery lasts.
In hindsight I should've stuck with CM12 5.1.
Just wondering if I'll be able to take an OTA update from 6.0 to 6.0.1 whenever it is available? I received a message saying a software update was available and when I told it to install it, it rebooted into TWRP, checked the current software for about 3 minutes, then rebooted? Upon looking, I am still on 6.0? I had the system check to see if there was still an update available, but it said there was nothing. Maybe it was just a radio update? I am anxiously awaiting the update so that I may install Xposed. Any input would be greatly appreciated :good:
AT+T US Unlocked
Rooted/S-off
6.0
1.10.502.3
You can't take OTAs with rooted phones and twrp. The OTA looks at the system partition and if anything is changed...it will not install.
You have to either take a backup somebody made with the OTA/stock basically. Flash it via TWRP. Or RUU back to the lastest for your phone. Then, take all OTA updates, then TWRP, Format Data, then SuperSU again, reboot...start/restore phone.
There is no easy way without Dev support/Custom Roms to get latest bases/OTAs right now without wiping/starting over somehow.
This is why having devs creating Roms is really a luxury. Because they already have the proven installer/Rom customized. They will then take OTAs/new bases, roll that into their Rom, and you just do an update/flash, like Viper, and not lose anything, and no need to wipe.
Likely never to happen with this phone since Devs really only work on the Mainline/Flagship M models, like M8/M9/M10 etc...