Hi all,
I've been having trouble getting my LTE to work after updating to the 3.18 RUU and flashing CM10.1. I have tried multiple radios, even tried to go back to my old CM 10 with the stock (i believe) 2.20 radio, still not connecting to LTE.
I currently flashed the new Venom 4 sense 5, still LTE is not working. HSPA+ the internet works fine, however when 3G is connected I cannot seem to surf.
I am S-off, super CID, using TWRP 2.6.
I manually added the ltemobile.apn into each rom and still doesn't allow me to use LTE.
I'm on the Rogers network, in Toronto. Usually have fantastic LTE service (I work in the rogers building, the LTE tower is literally 100m away.
Not sure what else I can try other than calling in to tech support to get them to re register the SIM card.
Has anyone else had this problem? If so please respond or PM me, would really appreciate some help.
I am using the RC of CM10.1 as my daily driver, tried Venom 4.0 to see if LTE would work here. No luck on either.
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work -- tried both
Fixed
0.20os.32.09.15_10.113.32.28L - baseband version
Fixed the issue, flashed this radio and seems to be working so far.
Type should typically be some of these:
default, hipri, supl, mms
I've always used "*" as the type, worked fine for any other rom I've run. And it seems to be working now, I assume i flashed the wrong radio and thats where things went south.
Does anyone know the best radio's to run with the new 10.1? When pulling radios from the radio thread, it has a CM section, are those still the ones required with CM roms?
Normally the radio version should not matter for things like getting LTE, of course you are seeing different
I believe CM went back to the normal way of doing the radio so use the Sense ones.
Related
I have noticed that all the non stock ROMs insert a different default APN than what the Inspire had when it was stock.
Stock
Name
MediaNet
APN
Phone
Proxy
<not set>
Port
<not set>
Username
<not set>
Password
<not set>
Server
<not set>
MMSC
<not set>
MMS proxy
<not set>
MMS port
<not set>
MMS protocol
WAP 2.0
MCC
310
MNC
410
Authentication type
None
APN type
default,admin,fota
Default APN on Rooted ROMs
Name
MediaNet
APN
wap.cingular
Proxy
wireless.cingular.com
Port
80
Username
[email protected]
Password
cingular1
Server
<not set>
MMSC
http://mmsc.cingular.com
MMS proxy
66.209.11.32
MMS port
8080
MMS protocol
WAP 2.0
MCC
310
MNC
410
Authentication type
None
APN type
*
After I Rooted and installed a new ROM, I changed the APN back to what it was originally (MediaNet/Phone), data was working fine but I could not send any MMS. Sadly I had never tried to send any MMS when the phone was stock so I am not sure if it was working originally.
So after some fiddling around I changed back to (MediaNet/wap.cingular) and now MMS go through fine but the data speeds seem slower.
So, my questions are
1. Those of you who are still stock, do you have any trouble sending MMS?
2. Those of you who are rooted, what APN are you using and have you tried sending MMS? Also, what are you results with data speeds if you have tried both APNs?
Guess I am the only one, LOL
Im experiencing the same problem, if i install a stock rooted ATT rom on my inspire. i average download speeds of around 2.1 Mb/s uploads are 0.2 Mb/s.... i installed cm7 rc1 and my download speeds remained around the same but the uploads jumped from 0.2 Mb/s to around 1.7 Mb/s..... then i decided to install the latest nightlies from CM7... i did a nandroid backup of my current rom and installed CM7 nightly 7 without wiping... now my upload speeds are fine but the downloads have gone to hell... barely averaging 0.4 Mb/s down ( this is with full bars).. reverted back to CM7 RC1 and still getting the same download speeds... i dont know whats going... i know that the APN settings on stock inspires are different then the ones we are using, but i was getting pretty nice speeds with these settings ... tried everything that i can to fix my download speed but they kinda seem stuck at 0.4 Mb/s
I have a few questions for people who are more knowledgable about these things
1) Stock inspires have a wirless proxy setting, which CM7 and DHD roms dont, in the APN. what does setting this option do.
2) I read somewhere that build.prop needs to be edited to enable HSUPA, by setting the value for ril.hsxpa to 3... i did that on the stock rooted rom and was getting better upload but the settings in CM7 are set to 2, and i am still getting the same speeds... which is better 2 or 3 ???
3) i have dialled *#*#4636#*#*, and set the radio default to US... is this even necassary or does it even help ??
thanks all
Count me in. Revolution 2.0.16 and I'm now working at dialup speeds. I'm ready to go back to stock. This device is too new to have stable ROMs it seems.
All you have to do is make one basic change. Under each APN, the last field (APN Type)determines what the APN is used for. For MediaNET(default Inspire APN, name of "phone", use "default, supl" without the quotes. Under wap.cingular, enter "mms" without the quotes. If done correctly, wap.cingular should not be selectable as an APN.
Data speeds are fine, and MMS works.
I am using CM7 with these settings.
id10terrordfw said:
All you have to do is make one basic change. Under each APN, the last field (APN Type)determines what the APN is used for. For MediaNET(default Inspire APN, name of "phone", use "default, supl" without the quotes. Under wap.cingular, enter "mms" without the quotes. If done correctly, wap.cingular should not be selectable as an APN.
Data speeds are fine, and MMS works.
I am using CM7 with these settings.
Click to expand...
Click to collapse
I will try that out tonight when I upgrade to AR 2.1
Sent from my (DHD) Inspire 4G using XDA app
I found this thread when looking for the apn settings for the newest CM7 for us. So i thought anyone who would like them could find them here
http://forum.xda-developers.com/showthread.php?t=1187611
all credit goes to denenatse for posting this, althought what he has there is the exact same as what we ahve on stock so he must have copied them from that... although one difference is at the bottom in apn type, he has not set... i had mms and data connection or something like that
joeym11 said:
I found this thread when looking for the apn settings for the newest CM7 for us. So i thought anyone who would like them could find them here
http://forum.xda-developers.com/showthread.php?t=1187611
all credit goes to denenatse for posting this, althought what he has there is the exact same as what we ahve on stock so he must have copied them from that... although one difference is at the bottom in apn type, he has not set... i had mms and data connection or something like that
Click to expand...
Click to collapse
Yeah it should be. Heres one I quickly googled. Is it doesn't work, google again.
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
Hi all-
I had to reload my phone recently, and discovered some issues with Rogers on LTE.. the LTEMobile APN appears to block tethering.
I've tried tethering several tablets (Nexus7, Galaxy Note10) and my laptop through LTEmobile and the only traffic that passes is DNS lookups, yet the phone itself works fine. IF I switch back to the stock Rogers HSPA APN, rogers-core-appl1.apn, all tethered devices work fine.
When I called Rogers technical support on this, the technician tells me that for tethering on LTE device, I must use lteinternet.apn; this is 'the designated APN for wifi tethering devices on the Rogers LTE network'.. LTEInternet.apn uses all the same default configuration as LTEmobile.apn, it is simply a different APN name.
HOWEVER- As I add the APN and test my phone and the Galaxy Note on the phone with him, I can clearly see (at least in my location currently) that the LTEInternet APN is actually *not* LTE, according to the apps on the phone it's connecting at HSDPA/HSPA+ and two Android Speedtest.net runs from my phone with the two APNs one after the other seem to bear this out: LTEMobile got 15Mbit downloads and 8Mbit uploads (still crappy in this location), 2 minutes later the LTEInternet APN got 1.8Mbit down and 0.39Mbit up. Switching back to LTEmobile.apn, my phone negotiates an LTE connection with the same tower.
So while it is named LTEInternet, it appears to be a kneecapped HSPA-only APN for tethering, deliberately limiting tethering speeds. As though a fixed data cap wasn't enough, now they kneecap the line speed for tethering too.
Is there a specific APN I need to use? I have a LTE microSIM as well, so nothing has changed aside from the ROM change.
I am unsure why I cannot connect to LTE, I know this phone was able to do it before on the stock rom...
I am currently on the Rogers network.
an_xda said:
Is there a specific APN I need to use? I have a LTE microSIM as well, so nothing has changed aside from the ROM change.
I am unsure why I cannot connect to LTE, I know this phone was able to do it before on the stock rom...
Click to expand...
Click to collapse
Make sure you are using the correct apn for the carrier you are on, and also check to see if LTE is toggled off.
bimmernut318 said:
Make sure you are using the correct apn for the carrier you are on, and also check to see if LTE is toggled off.
Click to expand...
Click to collapse
I tried searching but could not find the 'right' APN as I am unsure what is right and wrong. All I know is that I am able to get HSPA+ but no LTE... Could you please advise? Also, in the network settings it is currently GSM/HSPA/LTE (to that variant).
Currently on the Rogers network.
Checked for LTE APN and currently used this, no luck:
Name: Rogers LTE
APN: ltemobile.apn
Proxy: Not set
Port: Not set
User Name: not set
Password: Not Set
Server: Not Set
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Authentication Type Not Set
APN Type: *
Problem resolved, I guess I just had to reset + let Rogers register my SIM or something.
Can you tell me which "baseband" you have installed? It is in the Settings, About, Software Information, More screen. I'm having the exact same issue (no LTE) on Rogers and have that exact same APN. I'm wondering if I flash a certain radio if it will fix it. It would be greatly appreciated. Thanks!
denversc said:
Can you tell me which "baseband" you have installed? It is in the Settings, About, Software Information, More screen. I'm having the exact same issue (no LTE) on Rogers and have that exact same APN. I'm wondering if I flash a certain radio if it will fix it. It would be greatly appreciated. Thanks!
Click to expand...
Click to collapse
It might just be your area in KW.
I have the latest 2.41 radio from O2 but that should not matter as I previously had 1.94 (Rogers) radio as well.
an_xda said:
It might just be your area in KW.
I have the latest 2.41 radio from O2 but that should not matter as I previously had 1.94 (Rogers) radio as well.
Click to expand...
Click to collapse
Thanks for the info. We definitely do have LTE coverage here in the KW area. I ran the RUU to test it out and I indeed got LTE coverage. So far I'm stuck on HSPA if I run any custom ROM, but it is really not all that bad. Thanks again. Some day I will figure out how to unlock LRE on my phone!
denversc said:
Thanks for the info. We definitely do have LTE coverage here in the KW area. I ran the RUU to test it out and I indeed got LTE coverage. So far I'm stuck on HSPA if I run any custom ROM, but it is really not all that bad. Thanks again. Some day I will figure out how to unlock LRE on my phone!
Click to expand...
Click to collapse
Good luck, if that did not work I would say make sure you have an LTE microSIM as my knowledge in this matter is limited.
an_xda said:
Good luck, if that did not work I would say make sure you have an LTE microSIM as my knowledge in this matter is limited.
Click to expand...
Click to collapse
Thanks for the idea. I definitely have an LTE microSIM as I get LTE if I RUU. As soon as I unlock the bootloader and load a custom ROM I can't get past HSPA.
denversc said:
Thanks for the idea. I definitely have an LTE microSIM as I get LTE if I RUU. As soon as I unlock the bootloader and load a custom ROM I can't get past HSPA.
Click to expand...
Click to collapse
Update: I installed CM10 last week and got LTE. It has worked perfectly since then. I'm now running Calkulins 1.0b ROM and am still getting lte. I can't explain it, but it is fixed!
noob
any one help?? please.. i took my phone to someone who rooted my phone and updated to the lates 4.0.4 im on Rogers wirless and filled the APN settings and im only getting H or 3G and not getting LTE anymore.. can anyone help?? im running clean rom
You need to get the rogers APN for lte and put it in on your settings. I'm on fido and sometimes it takes a few minutes for it to connect to LTE. Here's the settings you can try
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work
Sent from my One X using xda app-developers app
If the above doesn't work try this:
Go into system tuner or ROM manager, backup then edit this build.prop:
ro.telephony.default_network
Change the number to 10 or 11 (that's what worked for me)
Save it and reboot.
Let me know if this works. I'm trying to get some momentum going on this as it seems to be a common problem in my area
I'm in Manitoba, which finally got LTE this past Monday after almost 2 years of waiting. My phone is on a corporate account. I'm running CM10.1 with the UCMC1 radio. I received an LTE SIM with the phone, along with a regular SIM. I had been using the regular SIM until Monday when our phone guy got my LTE SIM activated. I'm still only getting 3G and H+. I've set my APN to the following:
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Password - <not set>
Server < not set>
MMSC - h t t p ://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - *
I've tried *#*#4636#*#* and set the network type to every option. If I set it to LTE only, I get no signal at all. Do I have a defective SIM?
For tethering, I've tried the stock tethering and my PC will connect, but no Internet. I've tried "WiFi Tether" app with the same settings that worked on ICS and my PC cannot see my phone. I've tried every combination of settings to no avail. Using ltedata.apn. This was happening before I changed to an LTE SIM.
Scubacruiser said:
I'm in Manitoba, which finally got LTE this past Monday after almost 2 years of waiting. My phone is on a corporate account. I'm running CM10.1 with the UCMC1 radio. I received an LTE SIM with the phone, along with a regular SIM. I had been using the regular SIM until Monday when our phone guy got my LTE SIM activated. I'm still only getting 3G and H+. I've set my APN to the following:
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Password - <not set>
Server < not set>
MMSC - h t t p ://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - *
I've tried *#*#4636#*#* and set the network type to every option. If I set it to LTE only, I get no signal at all. Do I have a defective SIM?
For tethering, I've tried the stock tethering and my PC will connect, but no Internet. I've tried "WiFi Tether" app with the same settings that worked on ICS and my PC cannot see my phone. I've tried every combination of settings to no avail. Using ltedata.apn. This was happening before I changed to an LTE SIM.
Click to expand...
Click to collapse
Try installing the official Roger's Radio instead of att's UCMC1. Here is the link by Mohan
http://forum.xda-developers.com/showthread.php?t=2155984
Good luck
Commodore 64 said:
Try installing the official Roger's Radio instead of att's UCMC1. Here is the link by Mohan
http://forum.xda-developers.com/showthread.php?t=2155984
Good luck
Click to expand...
Click to collapse
I've tried that radio already with no difference.
What's it say in the status bar for data h+ or 4g?
Edit: never mind im an idiot for not reading all the way through
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
holeindalip said:
What's it say in the status bar for data h+ or 4g?
Edit: never mind im an idiot for not reading all the way through
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
It constantly switches back and forth between 3G, H & H+
Speed tests are between 400kbps and 5000kbps down. As they always have been.
Which CM10.1 date are you on? Use a newer one if possible i.e. CM10.1RC5. Do a clean install. Install the radio first then ROM.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Use 4636 switch to LTE all bands then back to auto. As for tethering look for the WiFi tethering fix in the general section.
Commodore 64 said:
Which CM10.1 date are you on? Use a newer one if possible i.e. CM10.1RC5. Do a clean install. Install the radio first then ROM.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
I'm on RC5. I did a full wipe before installing. Radio installed first. I've tried a few different CM10.1 builds.
icenight89 said:
Use 4636 switch to LTE all bands then back to auto. As for tethering look for the WiFi tethering fix in the general section.
Click to expand...
Click to collapse
I've done this. On "LTE only" I get no signal at all. No settings give me LTE. I've also tried all of the WiFi tethering fixes to no avail. I think that might be a carrier problem. My PC will connect, get Internet for about 20 seconds, then no Internet. I have a corporate 1GB plan and used to tether no problem under previous Android versions. I've asked our IT person to contact Rogers and request they enable tethering.
icenight89 said:
Use 4636 switch to LTE all bands then back to auto. As for tethering look for the WiFi tethering fix in the general section.
Click to expand...
Click to collapse
my LTE wasn't working since i went from stock to CM10.1. but I tried what you said here and i got my LTE back! sweet. thanks!
Hi Everyone,
I have been having terrible Data speeds since I updated to S-off. I've tried absolutely everything I can think of to fix this issue. I have tried different Roms (Cm10 Stable, cm10.2/10.3, AOKP, liquidsmooth, ViperXL both the Sense 5 and the older version , tried different Radios (listed below what speeds/luck I got with each radio) still the same issue. The CM10 stable rom was my daily driver for a very long time, had it backed up with everything configured, but still got the slow speeds after I've S-Offed.
On HSPA i am getting between 2 and 6 mbps, never any higher. Ping is extremely slow, 60 - 200ms depending on the test. It isn't the carrier (Usage is capped, and also no where near the cap. My wife has the exact same phone, running Viper's rom just before the Sense 5 release and gets 20+ on LTE (with extremely stable coverage, barely drops from LTE) she is S-ON and has never had a data issue.
I've tried using her exact radio, HTC TELSTRA 2.40 (0.20os.32.09.15_10.113.32.28L), didnt help same issue.
I did break my screen and get it replaced (not by HTC, sort of ghetto store) everything works except the screen tends to stick out a bit from the housing, the speeds were fine after this for at least 2 months so I can't see how it would start affecting it now.
I've used the same APN settings shown below since I got the phone, never had an issue before the S-OFF. The only thing I haven't tried is running the RUU to get back to stock. Is that necessary at this point? Or does this issue point more towards a hardware fault?
Carrier: Rogers
Current Radio: HTC TELSTRA 2.40 (0.20os.32.09.15_10.113.32.28L
Current Rom: CM10 Stable/ViperXL 4.2 Sense 5
ATT 2.20 (0.19as.32.09.11_2_10.105.32.25): http://d-h.st/bZx - stable, but slow no LTE/4G - 4mbps
HTC O2 2.29 (0.19as.32.09.20_3_10.107.32.25): http://d-h.st/AKZ - same as above
HTC TELSTRA 2.40 (0.20os.32.09.15_10.113.32.28L): http://d-h.st/cMp - best out of the bunch, actually get lte/4g, clocking at 10mbps down though.
HTC ATT 3.18 (0.24p.32.09.06_10.130.32.34): http://d-h.st/Aez - stablitiy issues, extremely slow when finally connected
Usage
Included:6144 MB
Used:451 MB
Remaining:5693 MB
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work
Any and all help is greatly appreciated,