Related
I have noticed that all the non stock ROMs insert a different default APN than what the Inspire had when it was stock.
Stock
Name
MediaNet
APN
Phone
Proxy
<not set>
Port
<not set>
Username
<not set>
Password
<not set>
Server
<not set>
MMSC
<not set>
MMS proxy
<not set>
MMS port
<not set>
MMS protocol
WAP 2.0
MCC
310
MNC
410
Authentication type
None
APN type
default,admin,fota
Default APN on Rooted ROMs
Name
MediaNet
APN
wap.cingular
Proxy
wireless.cingular.com
Port
80
Username
[email protected]
Password
cingular1
Server
<not set>
MMSC
http://mmsc.cingular.com
MMS proxy
66.209.11.32
MMS port
8080
MMS protocol
WAP 2.0
MCC
310
MNC
410
Authentication type
None
APN type
*
After I Rooted and installed a new ROM, I changed the APN back to what it was originally (MediaNet/Phone), data was working fine but I could not send any MMS. Sadly I had never tried to send any MMS when the phone was stock so I am not sure if it was working originally.
So after some fiddling around I changed back to (MediaNet/wap.cingular) and now MMS go through fine but the data speeds seem slower.
So, my questions are
1. Those of you who are still stock, do you have any trouble sending MMS?
2. Those of you who are rooted, what APN are you using and have you tried sending MMS? Also, what are you results with data speeds if you have tried both APNs?
Guess I am the only one, LOL
Im experiencing the same problem, if i install a stock rooted ATT rom on my inspire. i average download speeds of around 2.1 Mb/s uploads are 0.2 Mb/s.... i installed cm7 rc1 and my download speeds remained around the same but the uploads jumped from 0.2 Mb/s to around 1.7 Mb/s..... then i decided to install the latest nightlies from CM7... i did a nandroid backup of my current rom and installed CM7 nightly 7 without wiping... now my upload speeds are fine but the downloads have gone to hell... barely averaging 0.4 Mb/s down ( this is with full bars).. reverted back to CM7 RC1 and still getting the same download speeds... i dont know whats going... i know that the APN settings on stock inspires are different then the ones we are using, but i was getting pretty nice speeds with these settings ... tried everything that i can to fix my download speed but they kinda seem stuck at 0.4 Mb/s
I have a few questions for people who are more knowledgable about these things
1) Stock inspires have a wirless proxy setting, which CM7 and DHD roms dont, in the APN. what does setting this option do.
2) I read somewhere that build.prop needs to be edited to enable HSUPA, by setting the value for ril.hsxpa to 3... i did that on the stock rooted rom and was getting better upload but the settings in CM7 are set to 2, and i am still getting the same speeds... which is better 2 or 3 ???
3) i have dialled *#*#4636#*#*, and set the radio default to US... is this even necassary or does it even help ??
thanks all
Count me in. Revolution 2.0.16 and I'm now working at dialup speeds. I'm ready to go back to stock. This device is too new to have stable ROMs it seems.
All you have to do is make one basic change. Under each APN, the last field (APN Type)determines what the APN is used for. For MediaNET(default Inspire APN, name of "phone", use "default, supl" without the quotes. Under wap.cingular, enter "mms" without the quotes. If done correctly, wap.cingular should not be selectable as an APN.
Data speeds are fine, and MMS works.
I am using CM7 with these settings.
id10terrordfw said:
All you have to do is make one basic change. Under each APN, the last field (APN Type)determines what the APN is used for. For MediaNET(default Inspire APN, name of "phone", use "default, supl" without the quotes. Under wap.cingular, enter "mms" without the quotes. If done correctly, wap.cingular should not be selectable as an APN.
Data speeds are fine, and MMS works.
I am using CM7 with these settings.
Click to expand...
Click to collapse
I will try that out tonight when I upgrade to AR 2.1
Sent from my (DHD) Inspire 4G using XDA app
Hi guys, just got the new Infuse. I can't get data/3G. Voice works. I went into the APN settings, and there are two apns. One is called ATT Phone and one ATT WAP. I cannot choose between the two, I cannot delete them, I cannot edit them, I cannot add a new APN. Looking at the ATT WAP apn is missing the username and password, and I guess that's why it doesn't work.
I've never encountered an android device where I couldn't modify the apns, so I don't know what to do. Any ideas? Thanks!
What provider are you using?
Look in the market for apn. I forget the name of it, but there are several apn managers in the market that will let you backup and edit your apn some Android phones require two to work it seems. And if memory serves one of them is mostly blank.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
I'm using ATT. I played around it some more, and finally it let me save a new APN and I'm able to select it, so now everything works fine...
That was the normal setting for the phone as you described.
It should not have been a need for you to edit anything. My phone had the same settings and worked fine.
I have the same problem. Can you give me an instruction of how to fix it?
I just went to setting>Mobile Networks>Access Point Names
Then i added the new APN that my service provider her in the Dominican Republic gave me.
Have not reset the phone or tried anything yet.
Is this the correct process? WHere have you guys been trying to change it that it will not let you?
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Rocky is correct. I was having a similer issue and I have to add a new wntry by going to the Apn and adding a 3rd one like this. The name did not matter as I called mine test and used the same setting that Rocky posted (I got them from youtube shwing how to add it).
Now I have 3 APN and it works correctly.
THANK YOU!!! I am on infused 2.2.3 and everything was working peachy until a few days ago when I could no longer connect to data. I could get phone calls, but no data. I tried flashing a new modem, tried a new kernel, and was fixin to restore to stock because I didn't know what else to do until I say Rocky's post with the APN settings. This worked like a charm. Thanks again!!!
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Tgrifftto, did you try and successfully use those apn's on an infuse? I tried them and didn't get a connection, I'm running CM7.
Sent from my SGH-I997 using XDA App
I used them with the Infused v2.2.3 ROM and they worked well. I flashed to GSInfuse 1.1.5 today however to try on there because the last time I flashed this ROM it was bouncing sporadically between 3G and HSPA+ and was hoping it would alleviate that issue. So far no luck.
The settings suggested before is one of the default APNs (can also be set by hitting "menu/reset to default" on the APN settings screen), so may be what you wanna go with if it works for you. Another option I found that has worked for several people is along with the default settings specified previously including the following settings as well:
User name: [email protected]
Password: CINGULAR1
It seems to definitely be a "results may vary" kindof thing.
tgriffttu said:
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Click to expand...
Click to collapse
I actually tried that myself and had MMS issues, but I think I have a working hybrid of the two. I have been getting decent speeds and MMS works but I have been getting erratic results and need to test more.
Edit: Ok so dont judge me on this if it doesn't do anything for you but the data seems convincing to me for the moment. I tweaked a few things that have been posted previously and one thing in particular seems to have changed things for me. I removed the http:// from the MMSC server address and dropped the specified MMSC Proxy. I honestly don't know why it would have altered the routing so drastically and I do not have a traceroute to show if it maps differently this way but the attached shows the results I'm getting and for some reason adding the http:// and the specified MMS proxy (66.209.11.32) always slows me down noticeably. I cant measure my signal loss (other than on the phone) to see if anything else happens to be interfering when I have the http:// and the proxy address in place (cloud bounce reflectivity, solar flares, increase usage on the high tension lines between me and the tower) but these results are what I get every time I swap settings. The bottom 3 results on the attached are with http:// and proxy included and the top 4 are without it. Phone was sitting on my desk in the same place for all tests with the only changes (I could control anyway) being the APN setting. You'll see my ping times are almost identical so my routing couldn't have changed very drastically, but the numbers mean something is different.
Here are the settings I am using
Name: ATTINTMMS (just what I called it call it whatever you want)
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: Not Set
MMSC: mmsc.cingular.com
MMS Proxy: Not Set
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
As always this may or may not help you depending on the network architecture where you live and your local data traffic avg, but this is what it did for me.....
rocksteady said:
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Click to expand...
Click to collapse
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
albee320 said:
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
yea the "phone" thing does give me faster speeds. i still get cut out a lot though i love how tech support doesnt know sh*t lol. its been happening to me on all roms.
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
AJerman said:
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
Click to expand...
Click to collapse
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
sl0v4k said:
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
Click to expand...
Click to collapse
See, I thought I remembered one of them needing the username and password, however, I don't have one in my phone and it seems to work just fine. *shrug* Whatever works I suppose! But yeah, on MIUI just stick to single APN. I would assume not setting the APN Type would cause it to automatically default to everything using that APN (if it's the only one).
im one of the infuse owners and i noticed something with the signal issue ive been having for a very long time. data fix didnt work for me nothing seemed to work for me. the best results i get is with KI3 modem. also when i try to set "network type selection" to 3G only sometimes it automatically resets to 3G preffered which is what gives me the issues. but the thing i noticed is i have these severe issues of service cutting in and out when i am on umts. when i force my phone on hsdpa my download speeds almost triple my calls r beautifully clear no cutting in and out. any thought on this? is there a way i can have my phone on hsdpa only? and default the setting to 3G only in network settings? thanks in advance for any input i would really like to solve this
I got a Skyrocket this morning, however I did not opt for a new sim because I am in a non-LTE area. But I later realized that although I can make calls, I cannot receive calls, texting does work but data does not and I have no MMS. I set up a new APN using the same settings I had used on my Infuse 4G and now everything works except for MMS. Although I changed the apn I was not able to delete the stock apn that didn't work. Any ideas?
Here are the apn settings I used: wap.cingular, username: [email protected], password: CINGULAR1, MMSC: http://mmsc.cingular.com, MMS Proxy: 66.209.11.32, APN type: internet + MMS.
decimusmaximus7 said:
I got a Skyrocket this morning, however I did not opt for a new sim because I am in a non-LTE area. But I later realized that although I can make calls, I cannot receive calls, texting does work but data does not and I have no MMS. I set up a new APN using the same settings I had used on my Infuse 4G and now everything works except for MMS. Although I changed the apn I was not able to delete the stock apn that didn't work. Any ideas?
Here are the apn settings I used: wap.cingular, username: [email protected], password: CINGULAR1, MMSC: http://mmsc.cingular.com, MMS Proxy: 66.209.11.32, APN type: internet + MMS.
Click to expand...
Click to collapse
i would suggest to go get a new sim card, i dont live in a LTE area either but with new apn and new sim card my downloads are 3x faster and ping cut almost in half
twopumpchump said:
i would suggest to go get a new sim card, i dont live in a LTE area either but with new apn and new sim card my downloads are 3x faster and ping cut almost in half
Click to expand...
Click to collapse
Oh that is very cool to hear, I may end up having to do that. I kept my sim however because it is a microsim and I like to switch back and forth between my Androids and an iPhone using an adapter.
You're using the wrong APN..
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
r34p3rex said:
You're using the wrong APN..
Name: ATT pta
APN: pta
MMSC: http://mmsc.mobile.att.net
MMS Proxy: proxy.mobile.att.net
MMS Port: 80
MCC: 310
MNC: 410
APN type: internet + mms + supl
Click to expand...
Click to collapse
Those are my original settings which did not allow data or incoming calls to work at all.
decimusmaximus7 said:
Those are my original settings which did not allow data or incoming calls to work at all.
Click to expand...
Click to collapse
Oh my bad, I didn't see that you're in a non-LTE area. Did you try the "phone" APN used for HSPA+ connections?
Also, APN should not have any effect on your ability to make or receive calls
r34p3rex said:
Oh my bad, I didn't see that you're in a non-LTE area. Did you try the "phone" APN used for HSPA+ connections?
Also, APN should not have any effect on your ability to make or receive calls
Click to expand...
Click to collapse
You're right, the inability to receive calls was just a fluke. "Phone" worked for data but not MMS.
These settings made everything work in case anyone else needs them:
Name: Cingular 410
APN: wap.cingular
Proxy: <Not set>
Port: <Not set>
Username: [email protected]
Password: CINGULAR1
Server: <Not set>
MMSC: http://mmsc.cingular.com/
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Not set>
APN type: <Not set>
I guess this means that my data speeds are not going to be as high as they could be, but this does enable me to keep my microsim and switch back and forth with an iPhone.
decimusmaximus7 said:
You're right, the inability to receive calls was just a fluke. "Phone" worked for data but not MMS.
These settings made everything work in case anyone else needs them:
Name: Cingular 410
APN: wap.cingular
Proxy: <Not set>
Port: <Not set>
Username: [email protected]
Password: CINGULAR1
Server: <Not set>
MMSC: http://mmsc.cingular.com/
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: 310
MNC: 410
Authentication type: <Not set>
APN type: <Not set>
I guess this means that my data speeds are not going to be as high as they could be, but this does enable me to keep my microsim and switch back and forth with an iPhone.
Click to expand...
Click to collapse
Oh you didn't have the "4G HSPA+" provision on your account?
r34p3rex said:
Oh you didn't have the "4G HSPA+" provision on your account?
Click to expand...
Click to collapse
I guess not, I will call now and see if I can get that switched over. I would have thought they would have done that back when I bought the Infuse 4G, but apparently although the signal said 4G, I wasn't getting the speed.
I didnt get a new sim and am on stock apn settings with no issues. I asked about a new sim and they had no idea what i was talking about.
Sent from my SAMSUNG-SGH-I727 using xda premium
It depends when you last had to get a new SIM. The SIMs for LTE are different than UMTS. The PTA APN works just fine on all networks (E, 3G, H+ and LTE).
Just got off the phone and was told that I can't change my 3G Unlimited plan to a 4G one without them sending me a 4G Sim and then activating it and that they don't have a 4G microsim. Maybe I can do this to switch the plan and then ask for them to send me another microsim.
decimusmaximus7 said:
Just got off the phone and was told that I can't change my 3G Unlimited plan to a 4G one without them sending me a 4G Sim and then activating it and that they don't have a 4G microsim. Maybe I can do this to switch the plan and then ask for them to send me another microsim.
Click to expand...
Click to collapse
wont work. there is a micro SIM for LTE (you can probably guess how I know that) but I am guessing the adapter will not pass LTE but since the iphone is not LTE that may not matter.
BTW, you will not loos your unlimited data. They just add it to a unlimited LTE data plan. You can confirm this after the change on myatt.
shansmi said:
wont work. there is a micro SIM for LTE (you can probably guess how I know that) but I am guessing the adapter will not pass LTE but since the iphone is not LTE that may not matter.
BTW, you will not loos your unlimited data. They just add it to a unlimited LTE data plan. You can confirm this after the change on myatt.
Click to expand...
Click to collapse
Sorry, I guess I'm being a little slow tonight, but I don't quite understand what you are saying. Let me rephrase my question.
When using the "phone" apn, MMS does not work for me. I would like to be able to use the "phone" apn to get HSPA+ speeds and have MMS working. Currently I am having to use the "wap.cingular" apn so that my MMS will work.
I am currently using a 1 year old microsim that came in the iPhone 4. I have the unlimited data for iPhone.
What data plan should I be on so that I can use the "phone" apn with working MMS?
Also, can this data plan work with a microsim so that I can have HSPA+ speeds when using my Galaxy but also have the ability to use the iPhone 4 on some days?
The reason the default settings don't work is because you NEED to have a LTE data plan on your account. Trust me I know what I am talking about ;-). Once you have that provisioned on your account the default APN settings will work just fine.
decimusmaximus7 said:
Sorry, I guess I'm being a little slow tonight, but I don't quite understand what you are saying. Let me rephrase my question.
When using the "phone" apn, MMS does not work for me. I would like to be able to use the "phone" apn to get HSPA+ speeds and have MMS working. Currently I am having to use the "wap.cingular" apn so that my MMS will work.
I am currently using a 1 year old microsim that came in the iPhone 4. I have the unlimited data for iPhone.
What data plan should I be on so that I can use the "phone" apn with working MMS?
Also, can this data plan work with a microsim so that I can have HSPA+ speeds when using my Galaxy but also have the ability to use the iPhone 4 on some days?
Click to expand...
Click to collapse
For phone APN, set it to Internet only.
Then, set up another APN with the wap.cingular APN and set that to MMS only
decimusmaximus7 said:
Also, can this data plan work with a microsim so that I can have HSPA+ speeds when using my Galaxy but also have the ability to use the iPhone 4 on some days?
Click to expand...
Click to collapse
MicroSIM is only for iPhone 4/4s. Every other device uses a regular sized SIM. You'd have to keep going back and getting a new SIM everytime you'd like to use each phone.
I work for AT&T, I do it all the time, haha.
Couldn't you just trim a LTE sim card to the micro-sim size? xD
r34p3rex said:
Couldn't you just trim a LTE sim card to the micro-sim size? xD
Click to expand...
Click to collapse
Oh I love that suggestion, thanks.
twopumpchump said:
i would suggest to go get a new sim card, i dont live in a LTE area either but with new apn and new sim card my downloads are 3x faster and ping cut almost in half
Click to expand...
Click to collapse
what speed are you getting?
i'm in san francisco area, no LTE yet.
but rocket is selling 149.99$, maybe LTE is coming really soon?
I just got back from some drinks with a friend who has a One X he got for review from HTC. It's the Tegra 3 version. We literally (phones side by side) ran the same test using the speedtest.net app to the same server and his phone was at like 3kbps while mine was over 1Mbps. Not a particularly stellar location for the test (inside at a bar). We were not on LTE (not that his indicator says 4G/LTE...it actually says "3G" and then "H" or "H+")...But still. Why would there be such a dramatic difference?
Super weird. So I thought what was the APN settings maybe?? So we looked, it was on some cingular thing. I gave him my settings...I just wanted to ensure everything was the same...Best as possible anyway....But it wouldn't work. He couldn't hop on the same APN. Weird. Maybe his AT&T account was old and needed to use a different APN...I'm honestly new to AT&T so I don't know how it works.
So I thought it might be worthwhile mentioning to anyone looking to get an unlocked phone to just throw an AT&T sim card in... You may have some issues. It's extremely bizarre to me why we wouldn't end up with similar speeds running the same exact test side by side.
I guess I can try to get him to run some more tests later...But I'm really left to wonder if trying to go ahead and get an unlocked version of this phone is worth your while. Might backfire on ya.
Even with the correct APN settings, if he's not on a 4G/LTE plan, he won't get the full speeds from what I understand.
Try again with this APN, it should be good for 3G/HSDPA. Make sure to save it after you enter it and then make sure you select it too (the green dot is on). A reminder that the Teg3 version is not LTE capable because of different hardware.
Name: AT&T US HSDPA
APN: phone
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: <not set>
MMS Proxy: <not set>
MMS Port: <not set>
MCC: 310
MNC: 410
Authentication type: <not set>
APN type: default,supl,agps,fota,dun
I had the Int version of the One X and the Internet on it was very leggy, I tried several different APNs and sometimes I could get 3 mb and sometimes 3 kb. But for what it's worth, I came from an iPhone 4s on AT&T and the Micro SIM that is in the ATT iPhone 4s ONLY is a LTE compatible micro SIM. So if you put that SIM in an unlocked Intl 1X you should get 3G and H+ speeds and if you put it in a AT&T 1X you would have to swap your data plan to LTE but to get the LTE Data on the 1X. But then you can swap that SIM. Back to your 4S and the data will still work, that only thing that won't will be Visual VM on the 4S.
Bottom line is the AT&T 1X is a super fast LTE device that blows the Intl version away, the phone is much better even with 2 cores, just the lower amount of storage is an issue.
oooh, that makes sense...That it doesn't have an LTE radio. Man, even with an unlocked phone you're screwed huh? Well I guess except for the Rogers version?
Hi all,
I've been having trouble getting my LTE to work after updating to the 3.18 RUU and flashing CM10.1. I have tried multiple radios, even tried to go back to my old CM 10 with the stock (i believe) 2.20 radio, still not connecting to LTE.
I currently flashed the new Venom 4 sense 5, still LTE is not working. HSPA+ the internet works fine, however when 3G is connected I cannot seem to surf.
I am S-off, super CID, using TWRP 2.6.
I manually added the ltemobile.apn into each rom and still doesn't allow me to use LTE.
I'm on the Rogers network, in Toronto. Usually have fantastic LTE service (I work in the rogers building, the LTE tower is literally 100m away.
Not sure what else I can try other than calling in to tech support to get them to re register the SIM card.
Has anyone else had this problem? If so please respond or PM me, would really appreciate some help.
I am using the RC of CM10.1 as my daily driver, tried Venom 4.0 to see if LTE would work here. No luck on either.
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work -- tried both
Fixed
0.20os.32.09.15_10.113.32.28L - baseband version
Fixed the issue, flashed this radio and seems to be working so far.
Type should typically be some of these:
default, hipri, supl, mms
I've always used "*" as the type, worked fine for any other rom I've run. And it seems to be working now, I assume i flashed the wrong radio and thats where things went south.
Does anyone know the best radio's to run with the new 10.1? When pulling radios from the radio thread, it has a CM section, are those still the ones required with CM roms?
Normally the radio version should not matter for things like getting LTE, of course you are seeing different
I believe CM went back to the normal way of doing the radio so use the Sense ones.