Hi guys, just got the new Infuse. I can't get data/3G. Voice works. I went into the APN settings, and there are two apns. One is called ATT Phone and one ATT WAP. I cannot choose between the two, I cannot delete them, I cannot edit them, I cannot add a new APN. Looking at the ATT WAP apn is missing the username and password, and I guess that's why it doesn't work.
I've never encountered an android device where I couldn't modify the apns, so I don't know what to do. Any ideas? Thanks!
What provider are you using?
Look in the market for apn. I forget the name of it, but there are several apn managers in the market that will let you backup and edit your apn some Android phones require two to work it seems. And if memory serves one of them is mostly blank.
Sent from my SAMSUNG-SGH-I997 using XDA Premium App
I'm using ATT. I played around it some more, and finally it let me save a new APN and I'm able to select it, so now everything works fine...
That was the normal setting for the phone as you described.
It should not have been a need for you to edit anything. My phone had the same settings and worked fine.
I have the same problem. Can you give me an instruction of how to fix it?
I just went to setting>Mobile Networks>Access Point Names
Then i added the new APN that my service provider her in the Dominican Republic gave me.
Have not reset the phone or tried anything yet.
Is this the correct process? WHere have you guys been trying to change it that it will not let you?
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Rocky is correct. I was having a similer issue and I have to add a new wntry by going to the Apn and adding a 3rd one like this. The name did not matter as I called mine test and used the same setting that Rocky posted (I got them from youtube shwing how to add it).
Now I have 3 APN and it works correctly.
THANK YOU!!! I am on infused 2.2.3 and everything was working peachy until a few days ago when I could no longer connect to data. I could get phone calls, but no data. I tried flashing a new modem, tried a new kernel, and was fixin to restore to stock because I didn't know what else to do until I say Rocky's post with the APN settings. This worked like a charm. Thanks again!!!
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Tgrifftto, did you try and successfully use those apn's on an infuse? I tried them and didn't get a connection, I'm running CM7.
Sent from my SGH-I997 using XDA App
I used them with the Infused v2.2.3 ROM and they worked well. I flashed to GSInfuse 1.1.5 today however to try on there because the last time I flashed this ROM it was bouncing sporadically between 3G and HSPA+ and was hoping it would alleviate that issue. So far no luck.
The settings suggested before is one of the default APNs (can also be set by hitting "menu/reset to default" on the APN settings screen), so may be what you wanna go with if it works for you. Another option I found that has worked for several people is along with the default settings specified previously including the following settings as well:
User name: [email protected]
Password: CINGULAR1
It seems to definitely be a "results may vary" kindof thing.
tgriffttu said:
I was going to post this the other day but wanted to make sure it worked first. I stumbled onto this post in the SGS2 forums which gives the simplest solution that have given me the best result. The other suggested APN settings I've seen in various threads never worked for me. I wouldn't expect as monumental a jump in bandwidth as he shows, but it seems to be doing well otherwise.
[FIX] AT&T SGS2 Data Speed Issue's (Correct APN Settings)
Click to expand...
Click to collapse
I actually tried that myself and had MMS issues, but I think I have a working hybrid of the two. I have been getting decent speeds and MMS works but I have been getting erratic results and need to test more.
Edit: Ok so dont judge me on this if it doesn't do anything for you but the data seems convincing to me for the moment. I tweaked a few things that have been posted previously and one thing in particular seems to have changed things for me. I removed the http:// from the MMSC server address and dropped the specified MMSC Proxy. I honestly don't know why it would have altered the routing so drastically and I do not have a traceroute to show if it maps differently this way but the attached shows the results I'm getting and for some reason adding the http:// and the specified MMS proxy (66.209.11.32) always slows me down noticeably. I cant measure my signal loss (other than on the phone) to see if anything else happens to be interfering when I have the http:// and the proxy address in place (cloud bounce reflectivity, solar flares, increase usage on the high tension lines between me and the tower) but these results are what I get every time I swap settings. The bottom 3 results on the attached are with http:// and proxy included and the top 4 are without it. Phone was sitting on my desk in the same place for all tests with the only changes (I could control anyway) being the APN setting. You'll see my ping times are almost identical so my routing couldn't have changed very drastically, but the numbers mean something is different.
Here are the settings I am using
Name: ATTINTMMS (just what I called it call it whatever you want)
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
Server: Not Set
MMSC: mmsc.cingular.com
MMS Proxy: Not Set
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
As always this may or may not help you depending on the network architecture where you live and your local data traffic avg, but this is what it did for me.....
rocksteady said:
Here are the exact setting that work for me..
AT&T Settings.
Name: ATT WAP
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: Not Set
Password: Not Set
Server: Not Set
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: None
APN type: internet + mms
I hope this helps like it helped me.
Rocky.
Click to expand...
Click to collapse
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
albee320 said:
I havent tried it but i posted a possible solution in the miui thread...my apn settings disappeared after i flashed pikachus thunderbolt but reappeared after a restart....i dont think that your problem is that easy tho?
Also when you finally figure it out, i read in the Thunderbolt thread that changing APN from "wap.cingular" to "phone" will increase data speeds....according to linuxbozo
Hope this helped
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
yea the "phone" thing does give me faster speeds. i still get cut out a lot though i love how tech support doesnt know sh*t lol. its been happening to me on all roms.
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
sl0v4k said:
im running ics miui and under APN Type it just opens a field to type into like a text. when i reset settings to default it sets this to *...just a star. i see everyone has this internet + mms but i dont get any options. this is causing my calls to be dropped drastically and my data to cut in and out.
Click to expand...
Click to collapse
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
AJerman said:
Guys, one thing to note is that CM7 (and in turn MIUI), don't like multiple APNs. AT&T runs their ROMs with two different APNs, keeping the data APN separate. This is fine on any ROM based on AT&T's releases, however, if you try to use two on CM7, you'll likely run into issues. The best thing to do is disable the "phone" APN and only use the "wap.cingular" APN. If you have both on your phone, you can do this by adding "default" to the list of APN types for the "wap.cingular" APN (or you should be able to entirely delete, just make sure to add default to "wap.cingular").
If you do run an AT&T based ROM, I highly suggest you do use both with "wap.cingular" for mms and supl APN types, and "phone" for default. This is the absolute only "trick" you can do to make the phone's data a little faster (since build.prop changes don't do anything).
Here are the details for both:
"wap.cingular" APN:
Name: ATT MMS
APN: wap.cingular
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication type: Not set
APN type: mms,supl (and default if you are only using this APN)
APN protocol: IPv4
"phone" APN:
Name: ATT
APN: phone
Proxy: Not set
Port: Not set
Username: Not set
Password: Not set
Server: Not set
MMSC: Not set
MMS Proxy: Not set
MMS Port: Not set
MCC: 310
MNC: 410
Authentication type: Not set
APN type: default
APN protocol: IPv4
I notice a definite increase in response time with the "phone" APN. Pages seem to load a lot faster, regardless of what actual speed increases it gives you, so I recommend using that if you aren't on CM7 or MIUI. If you are, well, stick to single APN or else you'll see data issues, especially in Market.
It's not "internet + mms", you specifically type in "internet,mms". It is just a text field. You have to type in what you want. Actually, "internet + mms" may be a valid setting in that field, but I've always seen it comma separated, so that's what I'd stick to. I'm not sure what valid APN types there are, the ones I know of are mms, supl, internet, and default. default obviously being the catch all for anything not configured in another APN.
Click to expand...
Click to collapse
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
sl0v4k said:
ooohh thanks very much buddy. my issue was when i typed that with the plus sign i would loose data completely. actually everything except default and * cause me to loose my data. i am running miui and i did notice that the 2 apns make the phone go ape****. i kinda setup my own through a lot of research and googling and i came up with this which is making it go flawlessly except for the speed its not as fast as it can be. my setup is:
Name: AT&T
APN: phone
Proxy: wireless.cingular.com
Port:80
Username: [email protected]
Password: CINGULAR1
Server: <not set>
MMSC: http://mmsc.cingular.com
MMS Proxy: 66.209.11.32
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: None
APN Type: <not set> (this seems to work best this way)
APN Protocol: IPv4
for me if i leave out the username and pass then my data connection cuts in and out. like it never wakes up when i start using phone
Click to expand...
Click to collapse
See, I thought I remembered one of them needing the username and password, however, I don't have one in my phone and it seems to work just fine. *shrug* Whatever works I suppose! But yeah, on MIUI just stick to single APN. I would assume not setting the APN Type would cause it to automatically default to everything using that APN (if it's the only one).
im one of the infuse owners and i noticed something with the signal issue ive been having for a very long time. data fix didnt work for me nothing seemed to work for me. the best results i get is with KI3 modem. also when i try to set "network type selection" to 3G only sometimes it automatically resets to 3G preffered which is what gives me the issues. but the thing i noticed is i have these severe issues of service cutting in and out when i am on umts. when i force my phone on hsdpa my download speeds almost triple my calls r beautifully clear no cutting in and out. any thought on this? is there a way i can have my phone on hsdpa only? and default the setting to 3G only in network settings? thanks in advance for any input i would really like to solve this
Related
I haven't posted very much, but have been lurking a long time. Used the search option to try to find out the answer(s), but haven't had success. I've also read too many posts scolding for not posting in the proper area, so I'm just gonna drop this one right into Q&A, so I can't go wrong
I am running VU 1.29 ROM, and have been reading the threads about changing the APN settings, but VU never seems to be specifically listed in any of the "recommended" settings list among other ROMs like CM7, etc.
So I'm curious, from this thread, which APN setting would be most recommended? VU is a sense-based ROM, so I am more apt to use the settings listed under "Procedure for CoreDroid, HoneySense, LeeDrOiD and many other Sense based ROMs", but would like to get others input.
Also please keep in mind that I haven't yet hit my 10 posts to allow me to post in other areas (if this was the wrong area), so perhaps this thread can be used to help remove that restriction (only 9 more to go!).
Thanks, in advance, for the assistance!
olagaton said:
I haven't posted very much, but have been lurking a long time. Used the search option to try to find out the answer(s), but haven't had success. I've also read too many posts scolding for not posting in the proper area, so I'm just gonna drop this one right into Q&A, so I can't go wrong
I am running VU 1.29 ROM, and have been reading the threads about changing the APN settings, but VU never seems to be specifically listed in any of the "recommended" settings list among other ROMs like CM7, etc.
So I'm curious, from this thread, which APN setting would be most recommended? VU is a sense-based ROM, so I am more apt to use the settings listed under "Procedure for CoreDroid, HoneySense, LeeDrOiD and many other Sense based ROMs", but would like to get others input.
Also please keep in mind that I haven't yet hit my 10 posts to allow me to post in other areas (if this was the wrong area), so perhaps this thread can be used to help remove that restriction (only 9 more to go!).
Thanks, in advance, for the assistance!
Click to expand...
Click to collapse
You need these two APN's:
Name: MediaNet
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,mms,supl (no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Name: MediaNet2
APN: Phone
MMS Protocol: WAP 2.0
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,admin (no spaces between the words and the comma)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Select MediaNet2 as the "default" APN (make sure the green dot is selected for MediaNet2, and NOT MediaNet.
These APN's have worked for every custom ROM I've tried, and they are exactly the same as the phone's APN's before I rooted.
I appreciate the input. Thank you!
One thing I have noticed is that my normal MMS port is 8080, not 80. Which one would you recommend?
olagaton said:
I appreciate the input. Thank you!
One thing I have noticed is that my normal MMS port is 8080, not 80. Which one would you recommend?
Click to expand...
Click to collapse
What do you mean normal? On the totally stock phone through AT&T in your area, or custom ROM's? Every custom ROM I have flashed has that 8080 value. I always change it to 80.
meiguoguizi said:
You need these two APN's:
Name: MediaNet
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,mms,supl (no spaces between the words and the commas)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Name: MediaNet2
APN: Phone
MMS Protocol: WAP 2.0
MCC: xxx (Don't change this number!!! It should be set for your market automatically)
MNC: xxx (Don't change this number!!! It should be set for your market automatically)
APN type: default,admin (no spaces between the words and the comma)
APN protocol (if applicable): IPv4
Everything else: <Not set>
Select MediaNet2 as the "default" APN (make sure the green dot is selected for MediaNet2, and NOT MediaNet.
These APN's have worked for every custom ROM I've tried, and they are exactly the same as the phone's APN's before I rooted.
Click to expand...
Click to collapse
Sorry for this noob question but what do the change from MediaNet to MediaNet2 actually do?
Sent from my Inspire 4G using XDA App
meiguoguizi said:
What do you mean normal? On the totally stock phone through AT&T in your area, or custom ROM's? Every custom ROM I have flashed has that 8080 value. I always change it to 80.
Click to expand...
Click to collapse
That is exactly what I meant. It's 8080 normally, but the APN thread tells us to change it to 80, so I have. Just wondering why, i guess.
olagaton said:
That is exactly what I meant. It's 8080 normally, but the APN thread tells us to change it to 80, so I have. Just wondering why, i guess.
Click to expand...
Click to collapse
I will ask again: Is 8080 "normal" (have you seen it) on any stock AT&T phone? I've only seen 80. Anyway, if you want, try them both. Maybe it doesn't make a difference . worst case your data speed will suck, and you can try the other setting.
BTW, as of yesterday the MediaNet2 APN Type setting looks like this, on the leaked AT&T GB RUU:
APN Type:default,admin,fota,hipri
I tried it out all day yesterday, and it sure didn't hurt, and actually my data speeds were significantly higher than average, including a best ever.
meiguoguizi said:
I will ask again: Is 8080 "normal" (have you seen it) on any stock AT&T phone? I've only seen 80. Anyway, if you want, try them both. Maybe it doesn't make a difference . worst case your data speed will suck, and you can try the other setting.
Click to expand...
Click to collapse
I really didn't check my APN before I rooted my phone, so I'm not sure. I'll check some friends' unrooted inspires and get back to you, though.
Seems like every time I flash a ROM, my APN settings won't allow me to send/receive MMS. Does anyone have a setting that works?
My following set up (Which is default):
Name: ATT
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: Blank
MMSC: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Blank
APN Type: default,supl,mms
APN Protocol: IPv4
---------------
I am currently using Ninja ROM, and if you have configured the APN settings to have MMS work, please share the settings.
I have searched everywhere and nothing. Even asked in the Ninja thread, and the only response you get is "Oh, mine works...". That's basically a F U. Not helpful responses.
Thanks.
homescrub said:
Seems like every time I flash a ROM, my APN settings won't allow me to send/receive MMS. Does anyone have a setting that works?
My following set up (Which is default):
Name: ATT
APN: wap.cingular
Proxy: Blank
Port: Blank
Username: [email protected]
Password: CINGULAR1
Server: Blank
MMSC: wireless.cingular.com
MMS Port: 80
MCC: 310
MNC: 410
Authentication Type: Blank
APN Type: default,supl,mms
APN Protocol: IPv4
---------------
I am currently using Ninja ROM, and if you have configured the APN settings to have MMS work, please share the settings.
I have searched everywhere and nothing. Even asked in the Ninja thread, and the only response you get is "Oh, mine works...". That's basically a F U. Not helpful responses.
Thanks.
Click to expand...
Click to collapse
Not sure if you mistyped something, but the MMSC field is not supposed to read: wireless.cingular.com. Make sure it reads: http://mmsc.cingular.com
Also, your Proxy and Port fields should read:
Proxy: wireless.cingular.com
Port: 80
You don't list your MMS proxy field, but it should read: wireless.cingular.com
If the above changes don't fix anything, then let's try breaking out your MMS connection into a separate APN. Use this method (from my APN thread):
Standard warning applies here: as always, before making any major config changes be sure to fully backup your ROM. If you mess up real bad or something goes unexpectedly wrong, then you might permanently lose your connection with no recourse other than a complete restore.
Step 1. Delete all APNs
If you're not already at your APN screen, then from your home screen press Menu button --> Settings --> Wireless and networks --> Mobile networks --> Access Point Names
Press the left side of your 1st APN to go into the settings of this APN, then press Menu>>Delete APN.
Repeat this process for any other APNs you have. The goal is to delete all APNs so we can start from scratch.
Now do the next steps in the same order as below:
Step 2. Create a new APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 1st APN:
Name: MEdia Net
APN: Phone
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: default,admin,hipri (notice there is no space on either side of the commas)
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save. You will now be back at the initial APN screen.
Step 3. Create another APN (Menu>>New APN). Everything is case sensitive and must be entered exactly as below. This will be your 2nd APN:
Name: MMS
APN: wap.cingular
Proxy: wireless.cingular.com
Port: 80
Username: [email protected]
Password: CINGULAR1
MMSC: http://mmsc.cingular.com
MMS proxy: wireless.cingular.com
MMS port: 80
MMS protocol (if applicable): WAP 2.0
MCC: (don't change this number)
MNC: (don't change this number)
APN type: mms,supl (notice there is no space on either side of the comma)
APN protocol: IPv4
APN protocol (if applicable): IPv4
everything else: <Not set>
Press Menu>>Save.
You will now be back at the initial APN screen again. Make sure the 1st APN (named MEdia Net) is selected (via the round radio button on the right side). Your data connection will drop for a few seconds.
We are done at this point. Let me know if this works for you. If not, it is probably a software problem in your ROM somewhere.
I've tried this method you've posted. First of all, thank you.
Now, after setting up both APN's, neither seem to work to get MMS to function. I am not sure why.
I will call AT&T next week.
homescrub said:
I've tried this method you've posted. First of all, thank you.
Now, after setting up both APN's, neither seem to work to get MMS to function. I am not sure why.
I will call AT&T next week.
Click to expand...
Click to collapse
Hmmm, well at least we gave it a shot. The dual APN config should have worked for you, as it's the same as what comes on the stock ROM. I suppose one last thing you could try would be to get your phone back to pure stock and see if MMS works then. This stock RUU is located in this thread. It is an executable file that you run on your PC, and it completely wipes the phone, unroots it and brings it back to factory stock. If that doesn't work, then maybe your account isn't allowing MMS or something. Good luck either way.
I know it would work on stock, and stock rooted. But with any other ROM I flash, MMS won't work.
Again, thanks for your help. Its no deal breaker, just wish it would work.
I had the same problem I had to change the radio/ril back to stock to get it to work
SuicideMyk said:
I had the same problem I had to change the radio/ril back to stock to get it to work
Click to expand...
Click to collapse
I did that too on Ninja. And since I'm running Ninja ROM on mine, it seems its only able to use Single APN's.
I don't know.
I tried CM 7 on my infuse and really like it but can't seem to find an apn setting that works right for me. Default apn settings web browsing works but market says no conneciton retry. With the APN settings that were posted in the new to MIUI thread in general my market would work great but when I tried to browse the web it would say webpage blocked. So I was hoping I could get some folks who have CM7 running on their phones to post their APN settings for me to try out.
Thanks in advance.
This is working great for me...
4G(H+) speeds won't knock your socks off, but it's perfectly good for daily use.
Market, Browser, GPS, etc. -- Everything works consistently
I created a NEW APN (named AT&T), and left the two original ones alone
(password is CINGULAR1)
Fixed it myself for anyone who is interested the APN settings that finally worked right for me on CM7 were:
Name AT&T
APN: WAP.cingular
Proxy: Leave Blank
Port: Leave Blank
Username: [email protected]
Password: CINGULAR1
Server: leave blank
MMSC: http://mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS port: 80
MMS protocol: WAP 2.0
MICC 310
MNC 410
Auth type blank
APN type blank
I dont have an MMS Protocol in my APN settings...
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Sensation-al! said:
Like the title says, since the second ROM I ever installed, (CM7 alpha 10 I believe) I have not been able to send/receive MMS on any combo of software , ICS or GB, kernel , etc. I have verified the APN's, still nothing... my plan allows unlimited, so unfortunate that I can't use it...Any ideas are welcome
Sent from my Sensation using XDA
Click to expand...
Click to collapse
I have the same problem with MMS as well.
I opened a topic in Q/A section but no one replied...
Im on energy ics rom and its my first custom rom setted mms apns for rogers correctly couldn't send pics didn't try receiving tho...
Sent from my HTC Sensation Z710e using xda premium
I don't know if this helps or not, but It seems like people with American Carriers, or T-mobile tend to not have issues with MMS. I don't know if this would work, but maybe comparing APN settings and seeing if anything is missing may work?
Settings -> More.. -> Mobile Networks -> Access Point Names ->
at this point I had three or three options...
I assume they were: T-Mobile, T-Mobile Data, and T-Mobile MMS
Now since I use Simple Mobile, I had to change the T-Mobile to Simple Mobile with all the correct settings, and for MMS to work I also had to change the T-Mobile MMS APN with the same exact settings as the Simple Mobile APN.
-----------------------------------------------------------------------------
One other way you may try, after putting all the correct settings;
Where is says APN Type, write "mms" (without quotes)
Give it a try. Hope it helps.
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Me on rogers it wasn't a signal issue as i had full bars i just saw the "h" coming up only the upper bar was lightning but the lower one was normal..
Sent from my HTC Sensation Z710e using xda premium
Sensation-al! said:
Problem is, I'm on Bell Canada...
Sent from my Sensation using XDA
Click to expand...
Click to collapse
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
I am with O2 uk and also had this issue. I contacted them and they emailed their latest apn settings to me, which I copied in to my settings and my mms then worked fine. I think when some custom roms search for the apns automatically they pick up out of date settings. Just phone your carrier and ask for the apn settings for mms as if you are getting internet but no mms on several roms it can only be due to incorrect apn.
sent from my Sensation XE
Pikabat said:
I'm on Wind and I cant neither send nor receive mms but I think my settings are correct since the phone detected it automatically. Any ideas ?
Click to expand...
Click to collapse
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
it did lol thanks dude , any idea what caused that?
No clue, maybe I should call back office and let them know..
cdstewart said:
Go into apns
Choose WIND MMS
Under MMSC it will say http://mms.windmobile..ca
Change it to http://mms.windmobile.ca
It never used to do this but I've noticed for the last couple months its messed.
That should solve it! Hit thanks if I helped!
Click to expand...
Click to collapse
thanks! solved my problem!
MasterGGM said:
This is not my work, please try and confirm.
BELL:
Name: Bell Internet
APN: pda.bell.ca
Proxy: web.wireless.bell.ca
Port: 80
MMSC: http://mms.bell.ca/mms/wapenc
MMS proxy: web.wireless.bell.ca
MMS port: 80
MCC: 302
MNC: 610
APN type: Internet + mms
Authentication Type: none
ROGERS:
Here are the settings for Data
Name: Rogers
APN: internet.com
Username: wapuser1
Password: wap
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
Leave the rest blank. Now you Data should be working
Here are the settings Multimedia Messaging
Name: Rogers MMS
APN: media.com
Username: media
Password: mda01
Server: 172.25.0.107
MMSC :http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 72 (If that doesn't work try 720, its already filled in, leave it at what it is)
APN Type: mms
Leave the rest blank. Now MMS should be working!
HAVE A LOOK AT HERE: http://forum.xda-developers.com/showthread.php?p=21105129
Click to expand...
Click to collapse
For those having trouble with Rogers, I wasted quite a bit of time trying to figure out why I couldn't send/receive MMS. Solution for me was this:
1. USE ONLY THIS APN, DELETE ALL THE OTHER APNS - For some reason, it conflicted and when I deleted all the other unnecessary APN's it worked great again. Here's what I used and ONLY this one for Rogers Canada. The internet.com apn doesn't work for me, fortunately I found this one that works!
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
Problem still exists, any ideas?
Sent from my Sensation using XDA
Hey guys i dont know if its normal but the mms arent working for me as i went and flash any rom available for the skyrocket, the only way i got them to work is if im in a odin stock tar.
Anything about this?
APN Settings
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1 (yes this is in CAPS)
Server: leave blank
MMSC: mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
katyl said:
Name: AT&T
APN: wap.cingular
Proxy: leave blank
Port: leave blank
Username:[email protected]
Password:CINGULAR1 (yes this is in CAPS)
Server: leave blank
MMSC: mmsc.cingular.com
MMS Proxy: wireless.cingular.com
MMS Port: 80
MCC:310
MNC:410
APN Type: leave blank
Click to expand...
Click to collapse
Thanks! I went to a post on one of the roms and saw something like this a little different but it works. Thanks if the one i did stops working in the future i will use this one to see how it goes.
Could someone post the Rogers APN settings? I'm running the latest CM9 Alpha, but I'm also not able to send/receive MMS. Just want to make sure that I have the proper settings there... Unless there might be something else going on?
Daemon7542 said:
Could someone post the Rogers APN settings? I'm running the latest CM9 Alpha, but I'm also not able to send/receive MMS. Just want to make sure that I have the proper settings there... Unless there might be something else going on?
Click to expand...
Click to collapse
they never work for me on anything other than rogers roms... though ive only tried using the ltemobile.apn and the rogers-core-appl.apn.
though if you download Go Sms and turn off all notifications you can just open go sms when you get an mms and download it through that,.
Name:*Rogers
MMSAPN:*rogers-core-appl1.apn
MMSC:*http://mms.grps.rogers.com
MMS Proxy:*10.128.1.69
MMS Port:*80
MCC:*302
MNC:*720
APN Type:*mms
*all other settings left blank*
Add this AS WELL as your other APN, it won't have a selectable dot next to it, but it will enable your mms, just remember to save and reboot
Sent from my SGH-I727R using xda premium
Don't put the *'s
Sent from my SGH-I727R using xda premium
Thanks denenatse, that was exactly what I was looking for. Now to find out if that was my issue...
So... that APN info was already in my settings, so I'm not sure why this is happening. I just swapped my SIM over to my Captivate, which is running the latest CM9 nightly, and it's having the same issue (though again the APN info is there already). The MMS will show up, but when I click on the Download button it just sits there saying downloading for a while. If I then scroll the screen or do anything, the download button just comes back up like nothing has changed.
The weird thing is that I have still gotten a couple pictures and a video sent to me, so I'm not sure if this is a CM9 thing, a Rogers thing, or just me being a retarded duck...
Sorry about the lag time to getting this up, since this is the only thing not really working it's taken a back seat to life in general.
I'm with you, no MMS on CM9. Rogers, same APN settings. It's not a huge issue to me but I don't like it when things are not working lol.
I dont know if this will work on Rogers, but when ever i go to an ICS rom (from gingerbread), i have to turn on PAP authentication to get mms working. may want to give that a shot.
XDA_Diomedes said:
I'm with you, no MMS on CM9. Rogers, same APN settings. It's not a huge issue to me but I don't like it when things are not working lol.
Click to expand...
Click to collapse
Figured it out!
You will notice in the default APN that comes with CM9 the URL is:
http://mms.gprs.rogers.com
it's supposed to be:
http://mms.grps.rogers.com
Don't see the difference? Look closer
At first it didn't work, but you have to find all APNs that use that URL and fix it everywhere...
Yay MMS!!!
RabidSmurf said:
Figured it out!
You will notice in the default APN that comes with CM9 the URL is:
http://mms.gprs.rogers.com
it's supposed to be:
http://mms.grps.rogers.com
Don't see the difference? Look closer
At first it didn't work, but you have to find all APNs that use that URL and fix it everywhere...
Yay MMS!!!
Click to expand...
Click to collapse
Do you have an issue with rogers on CM9 sending large SMS messages ? I seem to be able to send short SMS, anything long says it does not send
unibombz said:
Do you have an issue with rogers on CM9 sending large SMS messages ? I seem to be able to send short SMS, anything long says it does not send
Click to expand...
Click to collapse
I don't have that problem currently, sounds like an MMS issue, I believe by default the MMS app is set to convert long messages to MMS maybe try un checking that setting?
On another note...
The "grps" URL worked for a while (even after several reboots) then quit on me again... I ended up purging all APN's from my phone and re-creating from scratch and now it works fine but only with the original "gprs" URL.
I am stumped, 50% of the google search results for "Rogers apn" use "grps" in the url, and the other 50% use "gprs"...
So yeah in summary, I don't know what's going on, and may be mistaken about the URL being a typo. MMS is fricken witchcraft... It's working on my phone now, but I don't dare touch anything for fear of breaking it again.
RabidSmurf said:
I don't have that problem currently, sounds like an MMS issue, I believe by default the MMS app is set to convert long messages to MMS maybe try un checking that setting?
On another note...
The "grps" URL worked for a while (even after several reboots) then quit on me again... I ended up purging all APN's from my phone and re-creating from scratch and now it works fine but only with the original "gprs" URL.
I am stumped, 50% of the google search results for "Rogers apn" use "grps" in the url, and the other 50% use "gprs"...
So yeah in summary, I don't know what's going on, and may be mistaken about the URL being a typo. MMS is fricken witchcraft... It's working on my phone now, but I don't dare touch anything for fear of breaking it again.
Click to expand...
Click to collapse
I just switched all my apn's to the grps now, and just going to test with my bro to see if he gets any of my mms or long txt. I will msg back in a bit to see how it goes
unibombz said:
I just switched all my apn's to the grps now, and just going to test with my bro to see if he gets any of my mms or long txt. I will msg back in a bit to see how it goes
Click to expand...
Click to collapse
You can also send yourself MMS messages, just type your phone number into the "To" box, after a minute or two you should receive the MMS from yourself.
That's how I was testing last night.
RabidSmurf said:
You can also send yourself MMS messages, just type your phone number into the "To" box, after a minute or two you should receive the MMS from yourself.
That's how I was testing last night.
Click to expand...
Click to collapse
Well long SMS dont send just tested, nor do MMS ... I will be changing roms probably tonight I cant be bothered messing with this too much as i need my phone
---------- Post added at 08:09 PM ---------- Previous post was at 07:59 PM ----------
SETTINGS I FOUND
-------------HSPA------------------
APN: rogers-core-appl1.apn
Proxy: <not set>
Port: <not set>
Username: <not set>
Password: <not set>
Server: <not set>
MMSC: http://mms.gprs.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302 (retrieved from SIM)
MNC: 720 (retrieved from SIM).
Authentication type: <not set>
APN type: <not set>
--------------LTE--------------------
APN - ltemobile.apn
Proxy - <not set>
Port - <not set>
Username- <Not set>
Passwors - <not set>
Server < not set>
MMSC - http://mms.gprs.rogers.com
MMS - proxy 10.128.1.69
MMS - Port 80
MMS protocol - Wap 2.0
MCC - 302
MNC - 720
Aythentication type - < not set>
APN type - either "*" or "internet + mms" Should work
__________________
---------- Post added at 08:30 PM ---------- Previous post was at 08:09 PM ----------
found this too
http://communityforums.rogers.com/t5/forums/forumtopicpage/board-id/Android/thread-id/8096/page/1
This is what works for me on Rogers for MMS/SMS:
To get to the configuration screen go to:
Settings > Wireless & Networks > Mobile Networks > Access Point Names
*menu button* > New APN
Data Configuration
Name: Rogers
APN: internet.com
Password: wap
MCC: 302
MNC: 720
APN Type: default,supl
*all other settings left blank*
MMS Configuration
Then if you need support for picture and video texts also add the following APN.
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.grps.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
*all other settings left blank*
The third APN is for tethering.
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: default,supl
*all other settings left blank*
Delete all other APN's listed, so that there is only these three left.
Reboot............
Heeter
Heeter said:
This is what works for me on Rogers for MMS/SMS:
To get to the configuration screen go to:
Settings > Wireless & Networks > Mobile Networks > Access Point Names
*menu button* > New APN
Data Configuration
Name: Rogers
APN: internet.com
Password: wap
MCC: 302
MNC: 720
APN Type: default,supl
*all other settings left blank*
MMS Configuration
Then if you need support for picture and video texts also add the following APN.
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.grps.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
*all other settings left blank*
The third APN is for tethering.
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: default,supl
*all other settings left blank*
Delete all other APN's listed, so that there is only these three left.
Reboot............
Heeter
Click to expand...
Click to collapse
+1 to this, exact settings I am currently using and everything is working fine (CM9 07/02/2012).
Couldn't tell you why grps.rogers.com ever worked but I swear it did!! I am not crazy...
Heeter said:
This is what works for me on Rogers for MMS/SMS:
To get to the configuration screen go to:
Settings > Wireless & Networks > Mobile Networks > Access Point Names
*menu button* > New APN
Data Configuration
Name: Rogers
APN: internet.com
Password: wap
MCC: 302
MNC: 720
APN Type: default,supl
*all other settings left blank*
MMS Configuration
Then if you need support for picture and video texts also add the following APN.
Name: Rogers MMS
APN: rogers-core-appl1.apn
MMSC: http://mms.grps.rogers.com
MMS Proxy: 10.128.1.69
MMS Port: 80
MCC: 302
MNC: 720
APN Type: mms
*all other settings left blank*
The third APN is for tethering.
Name: Rogers Tethering
APN: isp.apn
MCC: 302
MNC: 720
APN type: default,supl
*all other settings left blank*
Delete all other APN's listed, so that there is only these three left.
Reboot............
Heeter
Click to expand...
Click to collapse
Sorry to resurrect this post but when I do this there is no radio button beside the "Rogers MMS" APN. Is this normal? I'm still having difficulty sending MMS.
Thanks.