Database Info

Samsung galaxy s2 boot loop

Hi i just rooted my samsung galaxy s2. Root was successful but after i rooted my device i tried to install SensatioN ROM but installation was unsuccessful and my phone is stuck in boot loop i tried everything but nothing changed. Tried to delete user data and than installed orignal kernel which in my case is KF3. But i cant get out of it.
Any help wpuld be appreciated.
Thanks in advance.

same problem Samsung GS2 boot loop!!!
Hello it seems that i have the same problem as the other user: i just rooted my GS2 the other day and installed te HDBlog Rom. It all went fine until i wanted to install the AOSP Rom. The phone went into a boot loop. I can't get it to enter recovery mode. Does anyone know how to fix this? Now it's just showing the Galaxy S logo clip. Please help!

Turn off the G2, hold Volume up and power. Clear all files. Reboot device.

go into the bootloader and do a wipe.

Boot Loop
The only way i managed to resolve this was through the 3 file method. You can find some info on this on the forum. I'm too tired to search now. Glad i escaped the loop. Pfftiu!
Here it is, i just found it:
zyxeu said:
Hi,
I had a similar problem and following exactly Intratech's post #108 from the following thread solved my issue:
http://forum.xda-developers.com/showthread.php?t=1075278&page=11
The three file install went OK and then I was able to install the latest "one file" tars as usual.
Intratech's #108:
Click to expand...
Click to collapse
I assume you know how to use Odin. Download the firmware from this link and extract everything to one folder: http://hotfile.com/dl/116656855/2ccf...XWKDF.rar.html
The password for the file is: samfirmware.com
Start Odin and put these in the following
PDA: CODE_I9100XWKDF_CL170898_REV02_user_low_ship.tar
CSC: GT-I9100-MULTI-CSC-OXXKDD.tar
Modem: MODEM_I9100XXKDJ_REV_02_CL996627.tar
Forget the rest of the files. DO NOT SELECT A PIT FILE AND DO NOT TICK REPARITION.
Put your phone into download mode and connect the usb cable. When the Odin box turns yellow press flash and wait until phone reboots. The first boot will take a while... be patient.
It's 2:58am here so I'm off to bed. I don't know how to make this simpler for you.

dizzybboy said:
The only way i managed to resolve this was through the 3 file method. You can find some info on this on the forum. I'm too tired to search now. Glad i escaped the loop. Pfftiu!
Here it is, i just found it:
I assume you know how to use Odin. Download the firmware from this link and extract everything to one folder: http://hotfile.com/dl/116656855/2ccf...XWKDF.rar.html
The password for the file is: samfirmware.com
Start Odin and put these in the following
PDA: CODE_I9100XWKDF_CL170898_REV02_user_low_ship.tar
CSC: GT-I9100-MULTI-CSC-OXXKDD.tar
Modem: MODEM_I9100XXKDJ_REV_02_CL996627.tar
Forget the rest of the files. DO NOT SELECT A PIT FILE AND DO NOT TICK REPARITION.
Put your phone into download mode and connect the usb cable. When the Odin box turns yellow press flash and wait until phone reboots. The first boot will take a while... be patient.
It's 2:58am here so I'm off to bed. I don't know how to make this simpler for you.
Click to expand...
Click to collapse
Hi all,
I'm having the same issue (samsung logo loop).
I found this thread that seems to fix the issue but the RAR file mentioned is no more hosted...
Can anyone point me to a file that works? Any other idea would be much appreciated !
Thanks.

I had a boot loop on my galaxy s 2 .. out of nowhere didnt do anything.
It was too weird. I spent time reading lots of forums about this and saw different techniques.
What i did was i flashed back to 2.3.6. Did factory reset. then flashed back to ICS.
I think it happened because of some cache bull****. Just thought i should share.

Soft Brick Tmobile Galaxy Tab Plus

Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.

jmar8124 said:
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.
Click to expand...
Click to collapse
Thanks Bro, will try this when I get home from church

Do you know where I can find the tmobile firmware file I need?

There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_

pakalrtb said:
There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_
Click to expand...
Click to collapse
Thanks Bro!! It worked!!

soft brick galaxy tab 7.0 plus
I have the same problem as described by kaizasoshi on a GT-P6210 (WIFI only model) and can get to download mode. I haven't been able to find a copy of Odin 1.8 to download so I have Odin 4.0.3 - hopefully that'll work. The megaupload link for Odin 1.8 gives you software Odin 1.8.2 which turns out to be some sort of MRI operating software.
I used the link provided in the response for the GT-P6200 model, did a search, and I can't find the firmware file for the P6210 anywhere on the site. I found a file elsewhere on XDA supposedly is the firmware file for my model P6210 and when adding to PDA I get an error "Invalid Image File Type" The file name that I found is named GT-P6210_XAR_P6210UEKL1_P6210XARKL1_P6210UEKL1\P6210XARKL1_P6210UEKL1_HOME.tar.md5
Does this sound right? Does anyone have any guidance for me (besides stop bricking my Tab)? Thanks

soft brick galaxy tab 7.0 plus - continued
Well I found a version of Odin 1.8 and it took the tar file without an error message. I started flashing the file to my P6210 and it went well for a couple of minutes (about half a green bar in the first block). Then something went wrong and ODIN started alternating the below messages:
<ID:0/004>Added!!
<ID:0/004>Removed!!
<ID:0/004>Added!!
<ID:0/004>Removed!!
And while showing the above, the P6210 screen started alternating between a black screen and the below message:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again.
I watched this continue for over an hour in this loop (no progress on the green bar), then disconnected and reconnected the P6210. I launched Kies and tried troubleshooting but just got the alternating screen again on the P6210 and starts and stops of Kies troubleshooting. It looks like it's pretty hosed. Any suggestions?
Help would be greatly appreciated.
As an aside, the only thing I've done to the tablet was do a one step root about 3 months ago and I think two product updates afterwards (reapplied the root after each). The tablet ran OK but I started getting the auto shutdowns other have gotten, along with several instances of a warm battery and high battery rates of consumption. It didn't behave this way all the time. Finally two days ago, while on the charge,r I found it locked into the Tab startup screen. I could get it to boot into recovery but kept getting lots of red error messages, like it was looking for files that weren't there, then I'd reboot and it would go back to the locked startup screen.

Can you get into recovery by holding up and power on (release power after it boots, but hold volume up)
Sent from my HTC Glacier using Tapatalk

Yes I can get to recovery now. Since my previous post, I recharged unit overnight and attempted to reflash OS. This time, Odin runs all the way until the first green box says PASS! Odin Message box says <OSM> All threads completed (succeed 1/failed 0). Then message box cycles thru ID 0/004 Removed ID 0/005 added!! then ID 0/005 Removed!!, then ID 0/005 Added!!
At this point Odin doesn't do anything else. The P6210 then starts giving a bunch of failed messages - failed to mount cache(no such file or directory), Can't mount /cache/recovery/command, then goes into Manual Mode then message failed to mount /efs (no such file or directory) install application for customer: Can't mount /efs copy application failed. Then meesage Applying multi CSC then failed to mount /efs, then multi_csc can't mount/efs
Then multi-csc applied failed.then more messages on failing to mount cache can't mount cache recovery log/last log
Then at this point the top of the screen offers rebot/apply update from sd/wipe data-factory reset/wipe cache partition. Through all of this I have not unplugged the P6210 from the PC.
I select reboot system now and press power button (still connected)
Get a bunch more messages about cant open cache recovery log. Then it goes to the Samsung Galaxy tab screen and just hangs.
It seems there's some files missing that is causing the unit to hang.

added/removed sounds like could be faulty wire connection.
which firmware are you trying to flash may we ask?
May be useful to find a .pit file with stock firmware, if there are any around for your device.

kaizasoshi said:
Thanks Bro, will try this when I get home from church
Click to expand...
Click to collapse
no probs my friend happy to help haha

soft brick galaxy tab 7.0 plus - continued
I've also tried changing the usb/samsung cable from aftermarket to OEM and changing USB port used on PC. Reflashed PDA file, No change. The reflash appears to complete but is followed by the error messages identified previously. The file I'm attempting to flash w/Odin 1.85 is named P6210XARKL1_P6210UEKL1_HOME.tar.md5. The file is 894.011 MB. I've downloaded it twice and no difference in flash result. I'm not having any luck finding a PIT file for the P6210.
Still looking for PIT file.

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
May I ask what you did to soft brick? Be good learning experience for everyone. Thanks.

soft brick galaxy tab 7.0 plus - continued
I've also found these 3 other files associated with the P6210. They are:
GT-P6210-MULTI-CSC-OXEKK1_RST.tar.md5
P6210_APBOOT_P6210XXKL2_CL583761_REV02_user_low_ship.tar.md5
P6210_CODE_P6210XXKL2_CL583761_REV02_user_low_ship_16G.tar.md5
Would loading these files via Odin possibly help with my problem? I'm not sure which files would be loaded for the different parameters (PIT, BOOTLOADER, etc). It appears the CSC file would be loaded for CSC.
PS: I don't know what happened with kaizasoshi as far as how his TAB problem initiated, but mine had been experiencing SOD, auto shutdowns and warm battery when plugged into charger over night for the previous several weeks. I picked it up one morning off the charger and the P6210 was frozen on the startup screen and wouldn't finish boot or shut down. It would go into recovery using the power and volume switches.

hi all, i have the same similar problem as TS but mine's a P6200 tab, heard that i need a pit file & the firmware ver(singapore) to flash it...
where do i get those files including odin? i got the firmware via sammobile.com, but no idea to get the pit & odin files,... will any kind souls direct me to them?

I found a PIT file a few days ago, supposedly for the P6200 using Google. I don't know if it works or not. I have a P6210, so I don't think I can use a P6200 PIT.
PIT Link:
http://www.sammobile.com/forum/showthread.php?t=2856
ODIN Link:
http://www.cpkb.org/wiki/Samsung_Odin#Samsung_Odin3_download_links
Pick a version. 1.81 and 1.85 seem popular.

any new updates on this? im having the exact same problem and have tried all the previously mentioned files through Odin with no positive results. any help would be appreciated. i have a US version 6210

yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..

chrisrotolo said:
yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..
Click to expand...
Click to collapse
well that just sucks!! honestly with all the SODs and reboots i just wish samsung would give me my $350 because this thing hasnt worked well from the begining. guess its back to samsung

[Q] tab 2 7.0 P3110 stuck at Samsung Tab 2 7.0 screen unable to boot to recovery

Please can you help I bought this samsung tab 2 7.0 P3110 with it only powering on to the samsung tab 2 7.0 logo screen.
I am unable to get to recovery screen using the power and the vol up button all this does is power it off even if I hold for over one minute.
I can get to the download screen (power and vol down doing so is easy as it works) I have been able to use odin (failed many times) and download firmwares.
Last night I was able to download and gain a pass in Odin for CF-Auto-Root-espressowifi-espressowifixx-gtp3110 this I ran fist then 4.1.1 P3110XXCLK7_P3110OXACLK7_BTU. the problem after that is when odin tells it to reboot it hangs at the logo screen everytime. I have tried without the reboot and reboot manually it staill hangs.
is it a bootloader problem? corrupted partition? I think it needs the whole boot process reinstalled or rewritten if someone knows how
I am not looking for a custom rom All i want it to do is to power on into the stock recovery and to power on into the sofware by using something that works either by reformat or re partition the tab to get that part of the tab working before looking at firmware. sometime I have seen write fail when in odin.
simple instructions for how to get it back is all I am looking for.
I have browsed your site and watched youtube for hours no light at the end of the tunnel
thanks in advance for your help

tab 2 7.0 P3110 stuck at Samsung Tab 2 7.0 screen unable to boot to recovery
tab2noob said:
Please can you help I bought this samsung tab 2 7.0 P3110 with it only powering on to the samsung tab 2 7.0 logo screen.
I am unable to get to recovery screen using the power and the vol up button all this does is power it off even if I hold for over one minute.
I can get to the download screen (power and vol down doing so is easy as it works) I have been able to use odin (failed many times) and download firmwares.
Last night I was able to download and gain a pass in Odin for CF-Auto-Root-espressowifi-espressowifixx-gtp3110 this I ran fist then 4.1.1 P3110XXCLK7_P3110OXACLK7_BTU. the problem after that is when odin tells it to reboot it hangs at the logo screen everytime. I have tried without the reboot and reboot manually it staill hangs.
is it a bootloader problem? corrupted partition? I think it needs the whole boot process reinstalled or rewritten if someone knows how
I am not looking for a custom rom All i want it to do is to power on into the stock recovery and to power on into the sofware by using something that works either by reformat or re partition the tab to get that part of the tab working before looking at firmware. sometime I have seen write fail when in odin.
simple instructions for how to get it back is all I am looking for.
I have browsed your site and watched youtube for hours no light at the end of the tunnel
thanks in advance for your help
Click to expand...
Click to collapse
forgot to add the above was using Odin 3.07 and laptop is win 7. did try pc on xp and failed loads.

tab2noob said:
forgot to add the above was using Odin 3.07 and laptop is win 7. did try pc on xp and failed loads.
Click to expand...
Click to collapse
I am not too sure about the partition/repartition thing, but I think you should use said Odin to flash CWM 6.0.45. It doesn't mean you have to install a ROM, but try attempting a factory reset (at this point, not being able to boot up, you might need to use Cwm to create some sort of backup).
However, I suggest waiting until you receive more than one reply, as I may be wrong

For going into recovery, try holding the buttons at the same time. When you see the first samsung bootscreen, release the power button and continue to hold the other button.

jccarbon said:
I am not too sure about the partition/repartition thing, but I think you should use said Odin to flash CWM 6.0.45. It doesn't mean you have to install a ROM, but try attempting a factory reset (at this point, not being able to boot up, you might need to use Cwm to create some sort of backup).
However, I suggest waiting until you receive more than one reply, as I may be wrong
Click to expand...
Click to collapse
Hi thanks for your suggestion. I am thinking until I can get to the recovery screen putting on firmware isnt getting tab into recovery

tab 2 7.0 P3110 unable to boot into recovery or past samsung tab 2 7.0 screen
swrght13 said:
For going into recovery, try holding the buttons at the same time. When you see the first samsung bootscreen, release the power button and continue to hold the other button.
Click to expand...
Click to collapse
Thanks for your reply I probably didnt explain myself. I have always been holding down the power and the vol up button at the same time.
I have access to another tab 2 7.0 P3110 that is working in stock mode (a trusted friend allowed me to check how to get to the download and recovery screens ) I have noted the time it takes to boot into recovery from power off and from the samsung tab 2 7.0 screen and also going into recovery from the download screen. mine dont do any it just goes to the download screen or power off. the screen is black no life lol.
just a thought I dont think it actually powers off although the screen is black because I left it for over 10 hours I felt the back and it was warm battery was low as I couldnt power it on it was fully charged when I tried to get into recovery 10 hours earlier.
will try to explain one step at a time
because of the problem I am thinking I have to start from scratch instead of jumping into the middle of what is already possibly corrupt files. (I have probably built a house out of my bricked Tab)
1. what do I have to do to get a totally clean 8gb space for recovery and firmware to go onto?
2. what has to be installed via Odin to get to recovery (can recovery be tested on its own before the firmware is installed)
3. I have tried a PIT file before all I had was 0 completed and 0 failed???? is that good or bad? didnt see a PASS at the top left. did I have the correct PIT file?
4. are PIT files dependant on which version of Odin I run or recovery or firmware? if they are can someone point my in the right direction for everything that is compatible with each other
I read on this forum of splitting the MD5 files into bootloader pit by extracting it twice I tried that in winRAR I only had one chance it left a tar.md5 file which is the file I used to upload in Odin.
Thanks again for everyones help

2. You need to install Clockwork Mod Recovery version 6.0.4.5. It can be found in the development forum, made by Android-Andi
As for the rest, I'm not familiar

jccarbon said:
2. You need to install Clockwork Mod Recovery version 6.0.4.5. It can be found in the development forum, made by Android-Andi
As for the rest, I'm not familiar
Click to expand...
Click to collapse
I have tried the above it passes and reboots to samsung tab 2 7.0 and thats as far as it goes. I waited 15 minutes no change tried the usual to get into recovery not happening. went back to download screen and ran gtab2P311x8g.pit below is a snippet of the important bits from Odin output screen bottom left I had auto reboot, repartition and f reset time all selected
set pit file
get pit for mapping
theres no pit for mapping
all threads completed succeed 0 failed 1
I have also ran philz touch 6.008 universal root also pass with reboot and without reboot
all tar md5 files installs and with a pass reboots but no blue bar on the bottom of download screen and no access to recovery screen.
I think the internal 8gb memory needs to be wiped and partitioned.
maybe someone can tell me how to extract all the files that are needed to get the os onto the tab from the tar md5 file like the partition, recovery and bootloader etc and the order of installing in Odin

tab2noob said:
I have tried the above it passes and reboots to samsung tab 2 7.0 and thats as far as it goes. I waited 15 minutes no change tried the usual to get into recovery not happening. went back to download screen and ran gtab2P311x8g.pit below is a snippet of the important bits from Odin output screen bottom left I had auto reboot, repartition and f reset time all selected
set pit file
get pit for mapping
theres no pit for mapping
all threads completed succeed 0 failed 1
I have also ran philz touch 6.008 universal root also pass with reboot and without reboot
all tar md5 files installs and with a pass reboots but no blue bar on the bottom of download screen and no access to recovery screen.
I think the internal 8gb memory needs to be wiped and partitioned.
maybe someone can tell me how to extract all the files that are needed to get the os onto the tab from the tar md5 file like the partition, recovery and bootloader etc and the order of installing in Odin
Click to expand...
Click to collapse
Help needed anybody somebody.
I have tried with Heimdall and ADB not working. Now back to Odin

tab2noob said:
Help needed anybody somebody.
I have tried with Heimdall and ADB not working. Now back to Odin
Click to expand...
Click to collapse
Am now running with Odin 3.07 and CF Auto Root espressowifi....md5
it all run through with pass at the end. It doesnt show the blue line running across the bottom of the download screen on the tab. I have never seen this in all the 20 + times I have tried with Odin. All the you tube vids show this as part of the installation process. If I have auto reboot on the tab reboots when Odin send the request to the tab to reset.

tab2noob said:
Am now running with Odin 3.07 and CF Auto Root espressowifi....md5
it all run through with pass at the end. It doesnt show the blue line running across the bottom of the download screen on the tab. I have never seen this in all the 20 + times I have tried with Odin. All the you tube vids show this as part of the installation process. If I have auto reboot on the tab reboots when Odin send the request to the tab to reset.
Click to expand...
Click to collapse
ADB devices does not attach itself to the tab. ADB just says its waiting for device when in download mode and fastboot returns nothing. I think its because I am unable to run USB debugging due to no firmware.
Is there a way to get into the tab if theres no os?
I have taken the back off thinking the volume or power key might be faulty, there not. Pressing the power button and the up vol does nothing apart from putting the tab in a reboot loop or power off. I can get into download mode no prob. I have tried pressing the up and down vol keys with the power button to try to put the tab into shock no change.

I was searching the forum for a similar problem as mine.
And you have the exact same problem as I do.
At some point when I used Odin 3.07 and flashing an official firmware from samsung I got past the first boot screen.
But right after that it shows an android robot with a dedacahedron in front of it showing an animation and a loading bar.
Soon I discovered the next loop, since this animation would loop over and over again.
Now I waited for the battery to run out and charge it up till its full.
By the way:
When the tablet is off and I plug it in with the original cable and charger the tablet shows the battery icon, but it doesnt show the charging animation. The battery icon shows a "waiting" circle. So I cant really see if its charging or not.
Have you had any progress?
Would be so awesome to fix this, this galaxy tab is not mine. Its my brothers and I broke it by trying to root it and install cwm xD

Eureka
Dude I totally got into recovery mode.
I downloaded CWM (clockwordmod) 6.0.1.1 SuperSU 0.96 Busybox 1.2.0.2 md5 file.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=1880010
In the first post there are attached files.
The right one is in that list.
Then I tried flashing it with Odin3 Version 3.09
I googled for a newer version of Odin and found this version 3.09
First time rebooting didnt work.
But the seccond time I succesfully got into CWM recovery.
Hope this works for you 2!
Cheers.

Amlan90 said:
Dude I totally got into recovery mode.
I downloaded CWM (clockwordmod) 6.0.1.1 SuperSU 0.96 Busybox 1.2.0.2 md5 file.
You can find it here:
http://forum.xda-developers.com/showthread.php?t=1880010
In the first post there are attached files.
The right one is in that list.
Then I tried flashing it with Odin3 Version 3.09
I googled for a newer version of Odin and found this version 3.09
First time rebooting didnt work.
But the seccond time I succesfully got into CWM recovery.
Hope this works for you 2!
Cheers.
Click to expand...
Click to collapse
Thanks for the detailed guide and everyone's responses.. I was SOL also and re-flashing CWM helped get me back to where I can flash again.

4th day on bootloop. Use 2 min and help me!

So it's my 4th day on bootloop and i still can't figure out how to turn my phone on again.
I know how to push files to TWRP. I have Odin ready. I have 2-3 different stock ROM available.
Flashing stock rom doesn't help - even if i put Nand erase all.
Kies or Smart Switch doesn't help me neither.
Tell me what to do - please.
Bootloader, modem, rom, kernel, put files to TWRP or?
Just 2 minute of your time would be greatly appreciated. Please!

Boot into TWRP and go to Wipe, then Advanced Wipe. Check off data, cache, and internal storage, then swipe to do the wipe. Once complete, power off the phone.
Next, boot into Download Mode and flash your latest local stock firmware via Odin. Once the flash is complete, the phone will restart on its own.
The above steps put you at a clean slate. If it's still bootlooping at this point, it's most likely a hardware issue and the phone will need to be replaced.

Sevael said:
Boot into TWRP and go to Wipe, then Advanced Wipe. Check off data, cache, and internal storage, then swipe to do the wipe. Once complete, power off the phone.
Next, boot into Download Mode and flash your latest local stock firmware via Odin. Once the flash is complete, the phone will restart on its own.
The above steps put you at a clean slate. If it's still bootlooping at this point, it's most likely a hardware issue and the phone will need to be replaced.
Click to expand...
Click to collapse
i tried that. i have the same problem but the problem did NOT go away

Jaadi said:
i tried that. i have the same problem but the problem did NOT go away
Click to expand...
Click to collapse
Time to replace the phone then.

Sevael said:
Time to replace the phone then.
Click to expand...
Click to collapse
i bought it brand new in a sealed box off kijiji. i have the box but i dont know where the guy bought it from. i need the reciept to replace it. other than that, i can use warranty to get the phone repaired. i already sent it in and they changed teh battery but that didnt work. is there any way i can find out where the person bought the phone? the person is not replying to my text or calls

So Samsung sent it back to you and it was still bootlooping when you got it back? That's bizarre. I'd send it in again and attach a note.

Sevael said:
Time to replace the phone then.
Click to expand...
Click to collapse
It's not that easy to replace the phone when i have tripped my knox which means my warranty is off. That is the problem.

Immoblize said:
It's not that easy to replace the phone when i have tripped my knox which means my warranty is off. That is the problem.
Click to expand...
Click to collapse
I know, but there isn't anything else that can be done.
It sucks, but it happens. I've had phones die and I had no choice but to go out and buy a new one. It's the risk we take when tripping Knox.

Why don't you provide us with more details...:/ For example which model phone you have (920F/I/T/V/A/etc.) Bootloop means you soft bricked it afaik.
In this case use ODIN 3.10.7 and take a look here http://forum.xda-developers.com/galaxy-s6/general/project-zero-pac-firmware-pit-file-t3181133
1. Put phone in download mode + open odin ( = the phone is detected aye?)
2. Extract the FAC firmware you downloaded (if i am right it's 1 .tar file and if there are multiple you put modem in CP, bootloader in BL and phone in AP)
3. in AP put the right FAC firmware from the thread mentioned above, if its just 1 .tar file (use G920FXXU2BOG8_G920FOXX2BOG9_XEO_PAC.zip if you have the 920F)
4. In the tab "pit" select the pit file you downloaded for your device; e.g. 920F = G920F_EUR_OPEN_HIDDEN150M.pit
5. Start odin and let it succesfully finish
6. let phone reboot.. it will be on the samsung logo for maybe 10 min?

Sevael said:
I know, but there isn't anything else that can be done.
It sucks, but it happens. I've had phones die and I had no choice but to go out and buy a new one. It's the risk we take when tripping Knox.
Click to expand...
Click to collapse
http://forum.xda-developers.com/galaxy-s6/help/help-install-wrong-bootloader-modem-t3222207
Emergency mode should fix your problem.

Try to flash unikernel First.. Then de rom.. I had bootloop to.. This wil fix it
Sent from my SM-G925F using XDA Free mobile app

Quintz said:
Why don't you provide us with more details...:/ For example which model phone you have (920F/I/T/V/A/etc.) Bootloop means you soft bricked it afaik.
In this case use ODIN 3.10.7 and take a look here http://forum.xda-developers.com/galaxy-s6/general/project-zero-pac-firmware-pit-file-t3181133
1. Put phone in download mode + open odin ( = the phone is detected aye?)
2. Extract the FAC firmware you downloaded (if i am right it's 1 .tar file and if there are multiple you put modem in CP, bootloader in BL and phone in AP)
3. in AP put the right FAC firmware from the thread mentioned above, if its just 1 .tar file (use G920FXXU2BOG8_G920FOXX2BOG9_XEO_PAC.zip if you have the 920F)
4. In the tab "pit" select the pit file you downloaded for your device; e.g. 920F = G920F_EUR_OPEN_HIDDEN150M.pit
5. Start odin and let it succesfully finish
6. let phone reboot.. it will be on the samsung logo for maybe 10 min?
Click to expand...
Click to collapse
Sorry - SM-G920F
I have done it. It gives me Nand Write error all the time.
There is 1 AP file
1 BL file
1 Modem file (CP)
1 CSC file
also beside that i downloaded the Pit file for my device. Gives me nand write error all the time.

TheEndHK said:
http://forum.xda-developers.com/galaxy-s6/help/help-install-wrong-bootloader-modem-t3222207
Emergency mode should fix your problem.
Click to expand...
Click to collapse
This is the message i get from Smart Switch when trying to flash stock android from the program.

Help plz

my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that the phone doesnt reboot,i only reboots when i try to leave it on
-so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t

shaquil999 said:
my samsung galaxy s6 is using android marshmalow,it started last night when out of nowhere it started to reboot itself,i tried restarting the phone but after a few seconds of being on it rebooted it self into the samsung galaxy s6 powerd by android state and keeps showing the white led light and just stays there,i tried wiping particion,factory reset,entering safe mode,but it keeps going back to that exact same state,i also tried charging the phone for several hours but keeps coming back to that state
Note:i can turn the mobile off,and when i do that the phone doesnt reboot,i only reboots when i try to leave it on
-so i now managed somehow to boot it into safe mode and it doesnt reboot,but once i exit safe mode it start the hole thing over again.Note:sometimes when i boot it to safe mode it reboots some times it doesn´t
Click to expand...
Click to collapse
Enter in download mode and flash latest firmware with odin with 4-file flashing method.

115dan said:
Enter in download mode and flash latest firmware with odin with 4-file flashing method.
Click to expand...
Click to collapse
some questions,im kind of a "noob":
1-will doing this void my warranty?
2-can you point out a link where i can get details on how to perform the 4 file flashing method and also where do i download the firmware?

johnny_GSR said:
This will not void warranty, in this link you will find pit files http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
Download any latest firmware even if is 1 file and flash with pit file and repartition ticked
Click to expand...
Click to collapse
wow,ahm as i said im kind o a noob,so i did what you said and downloaded the latest firmware from sammobiles.i am just not getting the part where you say flash with pit file,so in odin i tick repartition,and where there is the button to select pit file i select this firmware that i download it and flash is that it?
Because the link you gave i kinda didnt understand a thing there

johnny_GSR said:
This will not void warranty, in this link you will find pit files http://forum.xda-developers.com/galaxy-s6/general/g920f-pit-file-banded-firmwares-t3118459
Download any latest firmware even if is 1 file and flash with pit file and repartition ticked
Click to expand...
Click to collapse
Wtffff. No repartition or pit file needed with repartition you can brick the phone. Go to sammobile and download from there latest unbranded firmware for SM-G920F and search on internet for a odin tutorial. It will not void your warranty.

115dan said:
Wtffff. No repartition or pit file needed with repartition you can brick the phone. Go to sammobile and download from there latest unbranded firmware for SM-G920F and search on internet for a odin tutorial. It will not void your warranty.
Click to expand...
Click to collapse
hi thank you for helping me avoid making a mistake,now again have patience with me please,i have been looking all over the net and so far i haven't found an article talking about the 4 file flashing method,i have downloaded the latest unbranded firmware all that's left to do is to find out how to do the 4 file flashing method help plz