Database Info

Soft Brick Tmobile Galaxy Tab Plus

Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.

jmar8124 said:
this is very easy to fix fortunately you have not hard bricked LOL now follow my steps....
step1. download your required firmware package from the development section.
step2. download the odinv1.8 and then unzip and install to desktop
step3. open odin and select PDA and load the unzipped firmware file. (do not touch anything else at all)
step4. power on the device with volume button down and power on (download mode)
step5. plug in to pc via USB 2.0 as this has less chance of failing then press start on odin it will push the firmware on to the device and them reboot
step6. sit back and enjoy lol.
thank me if it helps.
Click to expand...
Click to collapse
Thanks Bro, will try this when I get home from church

Do you know where I can find the tmobile firmware file I need?

There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_

pakalrtb said:
There you have it :
www.sammobile.com/firmware/?page=3&t=1&o=1&m=SGH-T869&r=5#regiona
P_
Click to expand...
Click to collapse
Thanks Bro!! It worked!!

soft brick galaxy tab 7.0 plus
I have the same problem as described by kaizasoshi on a GT-P6210 (WIFI only model) and can get to download mode. I haven't been able to find a copy of Odin 1.8 to download so I have Odin 4.0.3 - hopefully that'll work. The megaupload link for Odin 1.8 gives you software Odin 1.8.2 which turns out to be some sort of MRI operating software.
I used the link provided in the response for the GT-P6200 model, did a search, and I can't find the firmware file for the P6210 anywhere on the site. I found a file elsewhere on XDA supposedly is the firmware file for my model P6210 and when adding to PDA I get an error "Invalid Image File Type" The file name that I found is named GT-P6210_XAR_P6210UEKL1_P6210XARKL1_P6210UEKL1\P6210XARKL1_P6210UEKL1_HOME.tar.md5
Does this sound right? Does anyone have any guidance for me (besides stop bricking my Tab)? Thanks

soft brick galaxy tab 7.0 plus - continued
Well I found a version of Odin 1.8 and it took the tar file without an error message. I started flashing the file to my P6210 and it went well for a couple of minutes (about half a green bar in the first block). Then something went wrong and ODIN started alternating the below messages:
<ID:0/004>Added!!
<ID:0/004>Removed!!
<ID:0/004>Added!!
<ID:0/004>Removed!!
And while showing the above, the P6210 screen started alternating between a black screen and the below message:
Firmware upgrade encountered an issue.
Please select recovery mode in Kies & try again.
I watched this continue for over an hour in this loop (no progress on the green bar), then disconnected and reconnected the P6210. I launched Kies and tried troubleshooting but just got the alternating screen again on the P6210 and starts and stops of Kies troubleshooting. It looks like it's pretty hosed. Any suggestions?
Help would be greatly appreciated.
As an aside, the only thing I've done to the tablet was do a one step root about 3 months ago and I think two product updates afterwards (reapplied the root after each). The tablet ran OK but I started getting the auto shutdowns other have gotten, along with several instances of a warm battery and high battery rates of consumption. It didn't behave this way all the time. Finally two days ago, while on the charge,r I found it locked into the Tab startup screen. I could get it to boot into recovery but kept getting lots of red error messages, like it was looking for files that weren't there, then I'd reboot and it would go back to the locked startup screen.

Can you get into recovery by holding up and power on (release power after it boots, but hold volume up)
Sent from my HTC Glacier using Tapatalk

Yes I can get to recovery now. Since my previous post, I recharged unit overnight and attempted to reflash OS. This time, Odin runs all the way until the first green box says PASS! Odin Message box says <OSM> All threads completed (succeed 1/failed 0). Then message box cycles thru ID 0/004 Removed ID 0/005 added!! then ID 0/005 Removed!!, then ID 0/005 Added!!
At this point Odin doesn't do anything else. The P6210 then starts giving a bunch of failed messages - failed to mount cache(no such file or directory), Can't mount /cache/recovery/command, then goes into Manual Mode then message failed to mount /efs (no such file or directory) install application for customer: Can't mount /efs copy application failed. Then meesage Applying multi CSC then failed to mount /efs, then multi_csc can't mount/efs
Then multi-csc applied failed.then more messages on failing to mount cache can't mount cache recovery log/last log
Then at this point the top of the screen offers rebot/apply update from sd/wipe data-factory reset/wipe cache partition. Through all of this I have not unplugged the P6210 from the PC.
I select reboot system now and press power button (still connected)
Get a bunch more messages about cant open cache recovery log. Then it goes to the Samsung Galaxy tab screen and just hangs.
It seems there's some files missing that is causing the unit to hang.

added/removed sounds like could be faulty wire connection.
which firmware are you trying to flash may we ask?
May be useful to find a .pit file with stock firmware, if there are any around for your device.

kaizasoshi said:
Thanks Bro, will try this when I get home from church
Click to expand...
Click to collapse
no probs my friend happy to help haha

soft brick galaxy tab 7.0 plus - continued
I've also tried changing the usb/samsung cable from aftermarket to OEM and changing USB port used on PC. Reflashed PDA file, No change. The reflash appears to complete but is followed by the error messages identified previously. The file I'm attempting to flash w/Odin 1.85 is named P6210XARKL1_P6210UEKL1_HOME.tar.md5. The file is 894.011 MB. I've downloaded it twice and no difference in flash result. I'm not having any luck finding a PIT file for the P6210.
Still looking for PIT file.

kaizasoshi said:
Is there anyway to get out of this. It only shows the Samsung Galaxy Tab Logo, I can also get into recovery. I tried to wipe everything to see if it would boot up, but its still stuck on the startup screen. Any help would be much appreciated!!
Click to expand...
Click to collapse
May I ask what you did to soft brick? Be good learning experience for everyone. Thanks.

soft brick galaxy tab 7.0 plus - continued
I've also found these 3 other files associated with the P6210. They are:
GT-P6210-MULTI-CSC-OXEKK1_RST.tar.md5
P6210_APBOOT_P6210XXKL2_CL583761_REV02_user_low_ship.tar.md5
P6210_CODE_P6210XXKL2_CL583761_REV02_user_low_ship_16G.tar.md5
Would loading these files via Odin possibly help with my problem? I'm not sure which files would be loaded for the different parameters (PIT, BOOTLOADER, etc). It appears the CSC file would be loaded for CSC.
PS: I don't know what happened with kaizasoshi as far as how his TAB problem initiated, but mine had been experiencing SOD, auto shutdowns and warm battery when plugged into charger over night for the previous several weeks. I picked it up one morning off the charger and the P6210 was frozen on the startup screen and wouldn't finish boot or shut down. It would go into recovery using the power and volume switches.

hi all, i have the same similar problem as TS but mine's a P6200 tab, heard that i need a pit file & the firmware ver(singapore) to flash it...
where do i get those files including odin? i got the firmware via sammobile.com, but no idea to get the pit & odin files,... will any kind souls direct me to them?

I found a PIT file a few days ago, supposedly for the P6200 using Google. I don't know if it works or not. I have a P6210, so I don't think I can use a P6200 PIT.
PIT Link:
http://www.sammobile.com/forum/showthread.php?t=2856
ODIN Link:
http://www.cpkb.org/wiki/Samsung_Odin#Samsung_Odin3_download_links
Pick a version. 1.81 and 1.85 seem popular.

any new updates on this? im having the exact same problem and have tried all the previously mentioned files through Odin with no positive results. any help would be appreciated. i have a US version 6210

yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..

chrisrotolo said:
yeah.. dont flash a tab plus firmware unless you're sure its for your specific model
either T869-Tmobile/WifiGT-P6210/or G version GT-P6200. If youve flashed the previously mention files, you've probably done some serious damage.
Best option now: Find a device specific firmware WITH a .pit file, flash with Odin/Heimdall with fngers crossed.
Other options: tell them you hooked it up to iTunes to sync your media.. lololol
hope you get warrantied..
Click to expand...
Click to collapse
well that just sucks!! honestly with all the SODs and reboots i just wish samsung would give me my $350 because this thing hasnt worked well from the begining. guess its back to samsung

[Q] Problem during rooting help

I was attempting to get root access to my galaxy tab 2 10.1 running android 10.2.1 (or whatever the latest Samsung update was it is 10.2 on my phone but am sure it was 10.2.1 on the tablet.
I was following this guide that someone here recommended
http://www.ibtimes.co.uk/articles/4...-p5113-android41-jellybean-android404-ics.htm
I set usb debug and made sure the drivers were on my pc and made sure KIES was completely not running
Followed the instructions to the letter but should have worried when I found the instructions to get to download were wrong - I found on videos that it was reboot using power and right volume key. That was successful
It connected to ODIN fine and the yellow box came up
I made sure the two boxes were ticked and then searched for the file
CF-Auto-Root-espresso10wifi-espresso10wifibby-gtp5113.zip and started ODIN
it seemed to be going fine until suddenly a red box came up with update failed
Now all I can get on the device is "firmware upgrade encountered an issue. Please select recovery mode in Kies and try again"
No matter how I try to restart this I get the same screen and imagine I couldn't connect to kies even if I should
Can anyone help as I am worried that I have bricked my device - I was looking for a simple way to get root without flashing a whole rom - or is that what I was doing anyway?

Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:

Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again

n0is said:
Here is a link that may can help you : http://forum.xda-developers.com/showthread.php?t=1722745
Try to do the point A to install CWM Recovery and root correctly the tab then do the point E to install the stock Android 4.0.4
ps : if you want to do something to your tab, try to search here before other websites, big community, good informations/tips (personnal advise) :good:
Click to expand...
Click to collapse
I will take a look but so far the only thing I get is the message to connect to KIES and it wont of course connect - cant get into any other modes - you would think they would have some kind of hard boot recovery button that gets you to basic screen to download the latest firmware.
And I did start here and believe that this led from a post here - I was trying to find the least complicated method of getting root access without changing what I already had too much - the only other process that I found on here seemed to have lots of people reporting problems if it wasn't a 3g model
It is beginning to look like I may have found out what bricking is - thanks for the reply anyway

would like to do that
mjrshark said:
Maybe file you downloaded is corrupted , redownload it from xda or sammobile and do steps again
Click to expand...
Click to collapse
In fact the instructions do say if it doesn't work first time, to run it again with the boxes unticked - the problem is that I cant get back to download mode, or any mode other than the message to connect to kies, so have no way of doing this. So looks like it may have bricked - is there any way of unbricking a tablet?:crying:
It's going to be an expensive mistake especially as I haven't even had the £50 cash back from Samsung yet and I would have to pay full price now to replace it,

So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium

not optamistic but will try!
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
I will try but I don't think it is going to work. Whenever I connect the tablet by USB I get the usb connecting sound followed immediately by the USB disconnect sound - this just continues to happen every 4 seconds or so all the time that the device is connected. At the moment I have it on charge as once the error screen comes on it doesnt seem to go off for a very long time and then it wont start unless I charge it first. After a few minutes on charge - The firmware upgrade encountered an issue message comes up. I am going to leave it a while until I am sure it is fully charged and then try what you suggest - not optamistic though since I now realise that it is not even connecting properly. I just have a bad feeling about this. I had to disconnect it from the power yesterday because the error screen stays on continuously and the device starts to get warm
Assuming that I ever manage to get a stock image installed will this mean I can go back to normal kies updates - all I really wanted was the standard samsung android O/S but with super user added.
Unfortunately I had read the linked article a while back and what made me more confident was the statement that said it was "virtually impossible to brick this device"

Since it's still going into Charging mode and spitting out error messages, it's not completely bricked. It's just in a reboot loop (a.k.a. soft brick).
Keep trying to get it into Download mode. Sometimes the timing is a little tricky if it's in a boot loop.
1. Disconnect it before trying to get it into Download Mode. If it's plugged in (charger or PC), the device will go into Charging mode instead.
2. Hold the Power button for 10 seconds to make it reboot.
3. When you see the screen turn off, let go of Power and then press and hold Power and Volume Right/Up.
4. If done correctly, it will immediately go into Download Mode. If you see the Samsung logo instead, repeat from Step 2.

some progress but still stuck - any more ideas please
samsgun357 said:
So did you remove it from Odin after it failed?
If you connect and pull up Odin, even though its not in download mode, do you get an active com box showing its connected?
Have you tried kies yet?
There is a simple method of rooting in the link posted in the previous post by n0is. At this point you might have to flash a stock image before you try and root again. If you can get an active com port in Odin, run a stock image first, they can be found here in xda. Get it booted up and then make sure you are on the latest android version, its 4.1.1 here in the US. If you try and root first and then update, you will lose root so update first to avoid rooting twice.
Just to clarify the root procedures,
Odin the cwm recovery .tar from the thread.
Reboot to recovery then flash the super user zip for the p5113. It will ask you about erasing stock recovery or something like that, check yes.
And that's it, simple enough
Sent from my SCH-I535 using xda premium
Click to expand...
Click to collapse
Hi well thanks -
when I connected Odin it did show up yellow and so I downloaded the P5110 stock from from the other thread - all went well and it reported all OK and re-booted - saw the animated sequence but now it has stalled on the samsung logo and still wont connect to kies
So still stuck but at least it has moved on - The instructions on the other page were a little unclear about one stage
It said if there was pit file included to set something and tick repartition - this was all in one line and so I assumed part of the pit instruction - as there was no pit file I did not tick re-partition - I wonder if I should have done?
I have just reconnected to ODIN and the ID Com is still lit up yellow so presumably I could try running it again, or should I look on here for another stock rom - I am wondering if I have somehpw scewed up the bootloader and if so how I go about restoring it
ODIN is the only thing it connects to right now

No download mode, no recovery, detected by odin, not kies

Hi,
I rooted my brandnew GT-P3110 with cf, flashed pacman and cwm recovery. I do not blame anybody alse for my issues but myself. I guess I messed up the restoring of NON-system-apps:
After a day of troublefree use the tablet randomly rebooted and came back with the message "Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again.". No booting into recovery possible, no booting into download mode, no regular boot. Just the same message over and over again. Battery is unremovable.
I installed Kies, updated it, it downloaded drivers but under "emergency recovery" my tablet didn't appear. I then followed the "Firmware Upgrade and Initialization" procedure wich downloaded the necessary files but aborted with a korean text shown in the attachment after replugging the tablet. I tried this with 2 different USB-cables on several USB-ports. Kies btw asked me to remove the battery (not possible) after entering device number and serial-number. I turned off by pressing the off button instead and it turned on again.
I uninstalled Kies, rebooted, installed the samsung drivers manually, rebooted. I installed odin 1.85 (and later 1.3) and downloaded my contry's stock firmware (and later a newer version of the same firmware and another country's stock) from sammobile. I tried to flash them first without "repartition" ticked, later with it ticked but without a pit file (i can't find it!). I got four different errors, two are attached, the third was somethign like "cant write (line 1876)" and "cant write (line 1440)".I tried three stock firmwares with two version of odin with two USB cords on everal ports on ONE computer. I remove the tablet every time, exited odin every time, run it as admin, disabled firewall, xp-antispy and antivirus. I'm on Windows 7.
Besides a million other threads I found this one, but I wasn't able to solve my issue with it: http://forum.xda-developers.com/showthread.php?t=1652398
For 48 hours i tried to solve this problem by myself. Now I hope to find out if there's a point in continuing or if I can give up and throw away the piece of samsung.
Cheers,
404

android404 said:
Hi,
I rooted my brandnew GT-P3110
404
Click to expand...
Click to collapse
Try odin 1.61 1.85 sometimes itll jar it loose

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?

vizionforever said:
Try odin 1.61 1.85 sometimes itll jar it loose
Click to expand...
Click to collapse
Thanks but it didn't work.
wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Mine is still bricked. Good luck.

facing same problem in my samsung tab 2 p3100 after root

wd5gnr said:
I am having the same problem with a P5113. Started with stuck at the Samsung logo. Then I tried a flash from Odin that didn't work. That led to the "Firmware error" screen telling me to use Keis. Keis fails to find the tablet. Odin still sees it but doesn't get a good write.
Now all I get is the battery icon when plugged in but that's it.
Things I have tried:
1) Two versions of Odin
2) Different USB ports
3) Different PC
I also let the device sit over the weekend to completely discharge. Still nothing.
Did you (or anyone else) resolve this issue?
Click to expand...
Click to collapse
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.

novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
Click to expand...
Click to collapse
Thanks. Well, I understand the theory. I have had trouble finding a PIT file that I am sure is for my device. I did save a PIT file but I think it is corrupt because using it requires me to let the battery die afterwards to get back to download mode. Same for the bootloader. I have a few things I've tried, but not sure I have one that is exactly for the GT-P5113 (in fact, I never did find a JB for the 5113 just the 5110 and it never would load).

Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.

I can do each thing you mentioned, but my device is not getting detected by my PC. When I insert USB it says USB not recognized and it is not detected by Odin, adb and anything else. I am stuck on Boot Logo for my P3100 and when I go into recovery, it says USB not recognized. Fully messed up. Can you help me out here.
novjean said:
Dude had the same issue on my galaxy S2 and resolved it. I downloaded the
The .pit file for my gt-i9100g (http://data.hu/get/4697903/omap4_all_20110627_emmc.pit)
The stock ROM from sammobile. (http://www.sammobile.com/firmwares/2/)
The JB Bootloader
The stock JB kernel.
Opened odin v1.85.
Then i used the vol down+home+lock keys together to try to open the download mode ( but ended up in the "Firmware error " page) and connected phone to the pc. It shows "Added!" in the message box.
Repartition with the .pit and it will reboot.
Disconnect
Get into download mode and install the bootloader and it should reboot when done. Disconnect.
Get into download mode and connect
Installed the kernel through odin and reboot
Download mode again and install the ROM through odin.
If the phone gets stuck in boot loop (samsung logo over and over),
get into recovery mode ( for s2, vol up+home+lock, it needs to be pressed intermittently)
Then do a full format along with wipe cache.
And then the phone finally booted completely. :laugh: . Good Luck.
Note: I'm not sure to boot into recovery and download are the same key combos as it was for the i9100g.
Click to expand...
Click to collapse

2 years later .... did you ever unbrick this? I'm dealing with a P5113 now that's stuck at the "Firmware upgrade encountered an issue" screen. <sigh>
wd5gnr said:
Well no amount of coaxing has put life back into the tab
I may try again out of curiosity, but rather than invest more time I went out and bought a 32G Nexus 7 (2013 version). I would still like to get the Galaxy Tab alive again -- it has corrupted the flash twice before and each time I was able to bring it back to life. Not sure if this is an actual hardware failure or if it is just beyond partitioning.
I have a feeling if I had the right PIT and the right bootloader I could get back in business.
Click to expand...
Click to collapse

No. I finally sent it to one of these ebay guys who will JTAG it since I was too lazy to wire up one of my JTAG probes. They worked on it and said it was simply dead and the only alternative would be to replace the flash chips.
Bought a Nexus 7.

I've got the pit files for P311x and P3100 on my website https://sites.google.com/site/jrc2swebsite/downloads/samsung-galaxy-tab-2-70-p31xx

[Q] GT-P5113 Only booting to: Firmware upgrade encountered an issue.

Tablet is a Samsung Galaxy GT-P5113TS 16GB version.
The initial problem with the tablet was that the Galaxy Tab logo appear but would just hang. It would boot into the firmware download menu with the buttons but not the recovery mode.
Attempted to flash a CWM and/or a Philz Recovery. After the attempted flash (via Odin 1.85) which failed. The tablet could no longer be recognized by Odin. Rebooted the tablet and it now comes up with the error: Firmware upgrade encountered an issue. Please select recovery mode in Kies & try again. The computer and Odin 1.85, and 3.09 all recognize it is there connects to it but fails to install a recovery file, a PIT file, a full firmware (P5113UEUCMK3_HOME.tar.md5)
Kies detects there is a device but fails to recognize it.
Attempting to use Kies says it cannot upgrade or initialize the GT-P5113 after the model number and serial number are entered.
Odin 3.07 is presently the only Odin that goes through the entire process of flashing the Stock ROM.
However, when it completes, there is nothing on the screen. If I leave it for 10 minutes, the screen still remains black.
If I then shut it down, it reboot with the same error message. After trying that and another stock ROM,
Odin is now failing at system.img with the error Xmit Write fail XmitData Fail.
Now it is caught in a boot loop which reboots the tablet constantly (known only by the sound of a USB device disconnecting and reconnecting) and will eventually stop after a random time at the "firmware upgrade encountered an issue". Then I can try it again. I have tried it with the only two 4.2.2 firmwares that I can find on samsung-updates.
I have tried this on two different computers with the same firmware. It just seems to get worse the more I try.
I am not even sure what firmware was on it before as it belongs to a neighbour who asked me to help getting working for him.
Holding down the power button for 10 seconds or more does not shut down or stop the boot loop.
Any suggestions at all would be appreciated it.
Is there anything else I can try that I haven't tried already like a bootable micro SD card? I have searched and I can't find one or the correct information to make my own.
EDIT: Tried it with a PIT file (signed_espresso_20120220_16G.pit) but it fails to upload the PIT file with the error "There is no PIT partition"
Thanks for any help.

Um... do you know if odin was ever run with "repartition" checked but no pit file?
Sent from my SGH-T999 using Tapatalk

Not sure at this point but it is in the realm of possibility.
If it was, is there any way to repartition it? Like with Heimdall or something?
EDIT: This is what was done since posting the above.
OK, I left the tablet charging overnight (well I slept 4 hours or so) and this time it installed the firmware without any errors.
I figure it was that the battery was dead. However, even though it installs the firmware, it still fails if I use the .pit file with the same error of no PIT partition.
Upon reboot, it comes back to the "Firmware upgrade encountered an issue" message again.

tokenpoke said:
Um... do you know if odin was ever run with "repartition" checked but no pit file?
Sent from my SGH-T999 using Tapatalk
Click to expand...
Click to collapse
Yes I tried to re-partition a couple of times using the 16GB PIT file as it is a 16GB Tab 2. But it never completed any attempt to do the re-partition.
It installs the firmware every time now but after when it is finished to do the reboot. The screen remains black until I hold down the power button to shut it down and then it reboots and presents me with the firmware encountered an issue message.

dechronic said:
Yes I tried to re-partition a couple of times using the 16GB PIT file as it is a 16GB Tab 2. But it never completed any attempt to do the re-partition.
It installs the firmware every time now but after when it is finished to do the reboot. The screen remains black until I hold down the power button to shut it down and then it reboots and presents me with the firmware encountered an issue message.
Click to expand...
Click to collapse
I think I wasn't clear enough.
Repartitioning without using a pit file can wipe the whole system into one or two partitions.
As far as I know that is an irreparable condition.
Sent from my SGH-T999 using Tapatalk

Is there a way to create a bootable Micro SD card that has a recovery image CWM/TWRP that will allow me to repartition?
I got a heimdall print-pit output from somewhere with the partition block sizes, etc.

Thanks for the help. I think the eMMC was bad to begin with because it was not booting into recovery or even flashing recovery images or booting any of them.
I was hoping there was a way I could make a bootable micro SD that I could format the eMMC, booting to a bootloader from the micro SD card and flashing the stock rom back on.

Hi Dechronic, and hi all xda-dev members here,
I think I am experiencing some problem with yours.
My friend asked me to fix his Galaxy Tab P5100. It shows yellow triangle with message "Firmware upgrade encountered an issue......"
I did try to enter recovery/download mode by hold power+vol up/down -> Display went blank, then back to yellow triangle.
I did try to flash stock ROM that downloaded from samsung website using Odin 3.10.7, 3.10.6 -> Failed
I did try to flash stock ROM that downloaded from samsung website using Odin 3.07 -> PASS. Then device went blank again. There was no sign of life , then I pushed the power button -> Back to yellow triangle, again.
I tried another flashing -> still same result.
I tried to install CWM from odin -> PASS -> screen went blank again
Did you successfully "wake" your device up? If yes then please share the steps here
Many thanks in advance.

haniefhusna said:
Hi Dechronic, and hi all xda-dev members here,
I think I am experiencing some problem with yours.
My friend asked me to fix his Galaxy Tab P5100. It shows yellow triangle with message "Firmware upgrade encountered an issue......"
I did try to enter recovery/download mode by hold power+vol up/down -> Display went blank, then back to yellow triangle.
I did try to flash stock ROM that downloaded from samsung website using Odin 3.10.7, 3.10.6 -> Failed
I did try to flash stock ROM that downloaded from samsung website using Odin 3.07 -> PASS. Then device went blank again. There was no sign of life , then I pushed the power button -> Back to yellow triangle, again.
I tried another flashing -> still same result.
I tried to install CWM from odin -> PASS -> screen went blank again
Did you successfully "wake" your device up? If yes then please share the steps here
Many thanks in advance.
Click to expand...
Click to collapse
Let me guess, you have KIES installed?
Uninstall KIES if you use Odin or Heimdall to flash via download mode.
Don't use USB-Hubs - use i direct port on your PC/Laptop.
Good luck!

I have the exact same error on my tab 2 P3100, I tried upgrading through Kies, after entering the Model and serial no it says does not support Initializing.
I downloaded the Stock Rom and flashed using Odin, it shows a successful flash only in Odin 3.07 (other versions of Odin it shows FAIL), but when it reboots it shows the same message "Firmware upgrade encountered an issue"
I un-installed Kies and flashed through Odin, yet again the same error message, its just stuck on this screen. Any help like what should I do next?

Same problem!! Any help?

[Q] no battery pull precludes recovery

I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!

I was stuck rooting on the boot logo too. Had to use odin 3.10 and did "run as administrator". Also if this helps to reboot the stuck phone press vol down+power together until the screen blanks out. If you need to get into download mode, as soon as the screen blanks out, press and hold the Home button ( Don't let go of the vol down and power though ).
Good grief.... the non-removable battery has made these recovery tricks so difficult

thanks twisted_mind. at this point, i only get the blue screen asking me to do smartswitch recovery, and the one thing i CAN seem to do is volDown-power-home and it easily goes to download mode. i have not been able to get to recovery mode no matter what i do (including volUp-power-home, even before this smartswitch message came up after i tried to odin a stock recovery).
so i can still go to dload mode, and stick in a stock rom. the ones i've tried are from sammobile, and a potential issue is that i don't know the exact one to pick (this phone is a demo here in europe and i didn't note the details under settings when it was working). so the ones i try end in an odin FAIL. again, i've also tried odin unchecking auto-reboot, but then the phone is stuck at the very end of dload ("don't turn off target", etc), and i have no way to battery pull, etc.

Instead of holding power to shut off you have to hold power and vol down

jasonastley said:
I tried to use chainroot, and got stuck on the logo screen. normally you'd battery pull, go to recovery and wipe data. but i can't find any way to shut down the phone, before doing power-upVol-home.
And now i've tried to odin a stock recovery to undo chainroot, odin fails. could re-run odin with auto-reboot off, but again, no way to shut off and go to recovery.
at this point i'm stuck with the blue screen asking me to use smart switch on PC to do emergency recovery. but smartswitch says the device is not recognized.
thoughts? thanks!
Click to expand...
Click to collapse
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks

ktetreault14 said:
Instead of holding power to shut off you have to hold power and vol down
Click to expand...
Click to collapse
I have the turquoise screen that says "an error has occurred... use the emergency recovery function in smart switch...". if i do power + volDown there OR when the phone is stuck in download mode after the odin fail, the phone turns off but then comes right back on with the turquoise error screen. i've tried quickly going to the recovery key combo right when or right after the screen goes dark, but to no avail.
I can easily do power +volDown + home and go to dload mode. i just can't get into recovery mode no matter what i've tried so far.
if i could just find a stock rom that wouldn't fail in odin, or something else to use as AP/PDA in odin, i'd be set i think. wish i knew how to do this. hitting nand erase all in odin doesn't do the trick by the way.

ammsamm said:
Hello
I'm stucked on the same corner, i used Chainroot with odin 3.10.6 with no luck, just as what
happened with you, my S6 international module stucked on logo screen.
where did you get S6 stock recovery from?
Thanks
Click to expand...
Click to collapse
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters: http://www.sammobile.com/firmwares/database/SM-G925F/

jasonastley said:
got the stock rom from the sammobile site. but a problem is that they have many rom's listed for the G925F and i am not certain which variety i have, or if that matters
Click to expand...
Click to collapse
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted

ammsamm said:
I managed to root my G920F after "odin flashing" the UK version from Sammobile, release date 11-4-2015,
Then i flashed back the CF-Auto-Root.
Know my device is booting fine and rooted
Click to expand...
Click to collapse
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.

jasonastley said:
is the version you flashed the same version that you had prior (do the apps look the same, etc)?
so odin passed? (mine FAILs, with 4 different sammobile stock recoveries). I have the S6 Edge, maybe the S6 works fine and I just need the correct S6 Edge firmware.
Click to expand...
Click to collapse
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com

ammsamm said:
No its not the same version, mine was G920FZDAXSG and i flashed G920FXXU1AOCV, its a UK version, some Version
store apps was pre installed in the rom nothing more.
Odin passed normally with no issue.
i used two identical Odin v3.10.6 versions the second one i used is the one i flashed the rom and the root with.
Download the odin from this link:
samsungodindownload. com
Click to expand...
Click to collapse
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?

jasonastley said:
umm, hey ammsamm, i went to the link you just mentioned, installed it and GOT SOME NASTY SPAMWARE INSTALLED on my machine from it. I'd normally flag you immediately as a bad user, but your other comments sound legit. do you have anything to say about this?
Click to expand...
Click to collapse
Actually this is not the link i downloaded the odin from i tried to
Atthach the one i have but faced with the upload limit, even
After ziping and spilting the the odin, upload failed,
So, you better find another odin 3.10.6 a version with all the buttons
are enabled.