Database Info

please help me :( #reboot#

my problem is
a rooted my samsung galaxy tab 10.1
i did all of this steps carfully
Root Samsung Galaxy Tab 10.1 4G (GT-P7500r) for 4G version
Step #1: Download the karnerl file and download the recovery file to PC, please don’t modify it
Step #2: Plug the device to PC and copy downloaded files tablet.
Step #3: Turn the device off and reboot tablet into recovery mode:
At the same time hold down the Volume Down and the Power keys on your tablet.
When you see two icons appear on the screen, stop pressing the above mentioned keys. You can use the Volume Down key to navigate between these icons.
Select the icon on the left side (box). Press the volume UP key to select it. You will now boot into Recovery mode.
Step #4: Select “Install zip from sdcard, then “Choose zip from sdcard” and select “kernel.zip” to install, after that install recovery zip too in same manner.
Step #5: Return to main menu and select “Reboot now” and you are done. That’s it enjoy!
when i was in step 5 i returned to main menu and selected "reboot now".
after that the screen have been black with a light
i tried to turn it on i saw the samsung welcome.
then its been black and the tab turned off,
when i tried to press power and volume as the same issue when i turned on like when u unplug the tv or other machine
and when i plug it to the pc and press and hold power and volume
i listen a new device sound and when i look to the device manger
its appears "adx"!!!!!!!
i dont know that to do please help me to repair that !
and thank you

[Q]. Samsung Galaxy Y Duos Root? Help..

Hi! I have GT-S6102 and I want to root it.Does Any one of you know any one click appication which can root it without computer and without the risk of being bricked? Please Help.
Sent from my GT-S6102

There is always a risk for root.but this is a safe method.
To root,
1. Download & copy the below attached "update.zip" to the root of your sdcard.
2. Turn off phone.
3. Press & hold (Power + Volume Up + Home) keys & release when sgy duos logo appears.
4. You will be in recovery, select "select update.zip from sdcard".
Remember in recovery touchscreen will not work use volume up down & home keys.
5. Select "update.zip".
6. Yes
7. Done
http://www.mediafire.com/?1ixha9761lvgpuj
For Cwm,
1 .DOWNLOAD the file below.
2. put this in you sdcard (put it directly, not in any folder or anywhere) and it sould be named as "update.zip " without the quotes
3. switch off phone
4. Now Boot you phone in recovery mode by pressing Home Key+Volume Up Key + Power Key together for few seconds until you see samsung galaxy y logo
5. After that you will be taken to a menu, in this UI your touchscreen facility will not work, so use volume keys for scrolling up and down, home button to select and power key to go back.
6. In that menu select update from SD card and select the zip file which you have recently copied it in your SD card.
http://www.mediafire.com/?wb28yp2qvhhletd
Please hit thanks if I helped you.
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app

Hey did it work?
Sent from my Xperia Live with Walkman using XDA Premium 4 mobile app

[Q] Forgot Password pattern of Moto g 4.4.2 without setting up of gmail id

Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?

vids107 said:
Forgot password pattern without setting up of gmail id?
Please help it's only one day old mobile ? How to recover without gmail ?
Click to expand...
Click to collapse
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile

Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.

DarkDarth said:
Is there a way to access the data on the device without getting past the lock screen? Since it isn't encrypted I'm wondering how easy it would be to get a backup of your data and apps before you do the reset.
Click to expand...
Click to collapse
read well and try it
Steps On Bypassing or Unlocking
Pattern Lock or Password on Android
Devices Without Losing Data
Now, before you take any action on
your device, make sure you know it well
Requirement For a Successfully
Operation
1. Aroma File Manager 1.80 which
you can download from https://code.google.com/p/rom-cmexmini/downloads/detail?name=aromafm-1.80.zip&can=2&q=
2. Your Locked android device
either locked by pattern lock or
password
3. A Memory card( the memory
card of the android device)
You will be surprised that we don’t
need a computer, that the awesome
thing about this method of unlocking
password and pattern locks.
To the main business proper, how to
unlock the pattern lock or password,
please follow the steps
Step 1
Once you have download the Aroma
file manager , move it to the memory
card and insert the memory card to
the android device
Step 2
Open your stock recovery and
different device has there own way of
entering stock recovery, so I advise
you Google it out along with your
android device name. Once you have
it, enter into stock recovery which is
a black interface
Step 3
once you are there, use your volume
+ and volume – to scroll up and
down and use the middle button to
select
Step 4
Now Mount and storage>> Mount
Everything>> Mount System>> Mount
data>>Mount afs>>Mount
Preload>>Mount SDcard>> Mount
ExternalSD>> go back>> Install zip
from SDcard>>Choose zip from
external SDcard
Step 5
The find the Aroma File manager you
download into the sdcard and select
and select “Yes Install Aroma file
manager” then it will load and the
file manager will open in the recovery
mode
Step 6
In the aroma file manager, go to
Settings and Go to bottom n select
“Automount all device on start ”
which is the second to last option
and then exit from aroma file manger.
Step 7
perform step 5 again and the Aroma
file manager will update and open
again
Step 8
go to the Data Folder>>>then System
folder and find the gesture.key if it is
password lock that locked your
phone or password.key if it was a
password lock and press the file for
long and the option to delete the file
will pop up and delete it
Step 9
Exit the aroma file manager and
restart to the normal interface and
when the device has finished restart
you will still find the pattern lock or
password there but you are to use
any pattern lock or password and it
will accept and your device is
unlocked but note the pattern you
use and password.

anandrd said:
1. You first have to power off
your Android smartphone. In
order to do that, press the
power button and select
“power off”.
2. Wait a few seconds and then
press the volume up and
volume down buttons along
with the power button at the
same time for about 3, or 4
seconds.
3. Release the buttons; the
Moto G boot menu must be
now displayed on your
phone.
4. Use the Volume Down button
in order to scroll down and
also up as the Volume Up
button can be used only for
selecting an option.
5. Scroll down until you reach
“recovery” and the press the
Volume Up button once.
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
6. The android logo will now be
displayed on your phone.
7. Hold down Volume Up and
Volume Down buttons for
about 5 seconds and press
power button once.
8. The recovery mode menu
should now be displayed.
9. That was all; you can now
choose wipe data/factory rest to hard reset your
Moto G
and then choose reboot system now
thats it ur mob will become like new mobile
Click to expand...
Click to collapse
When I select 'recovery' and press vol up, nothing happens, no android logo, the screen just goes black and the phone is still powered off. I'm trying to factory reset to get rid of a screenlock pin that I forgot. I have tried pressing 'factory' and it doesn't get rid of the screenlock pin... The phone seems to reboot, but the stupid pin screen is still there. Anything else I can try?
---------- Post added at 11:47 PM ---------- Previous post was at 10:51 PM ----------
I finally was able to get rid of the screen lock pin by using this info:
External Reset
If you are unable to access the phone's menu to perform the standard reset you can attempt an external factory reset.
Notes:
When using this feature; everything is deleted from the device.
Reset will require a minimum battery level of 25%. If you are unable to perform a reset, please charge for 20-30 minutes and try reset again.
1. With the phone powered off, press the VOL DOWN KEY for 2-3 seconds then POWER key then release.
2. The device will display different BOOT OPTIONS
3. Use the VOL DOWN Key to SCROLL to Recovery and VOL UP Key to select
Tip: If the device reboots, you may have waited to long to make a selection, you will need to begin the process again.
4. The device will display the Motorola logo and then the Android in distress ( logo with Exclamation mark)
5. Press and hold the VOL UP key for 10-15 seconds. While still holding the VOL UP key tap and release the POWER key
Tip: You can try this step, holding the phone in landscape. If you are stuck on step 6, try a force reboot by pressing the Power key and Vol Down key, and start the process again.
6. The device will display additional menu options (Text will appear in BLUE)
7. Use the VOL DOWN Key to scroll to Wipe data / factory reset and the POWER Key to select this option
8. Use the VOL DOWN key again to select YES - delete all user data and press the POWER key to CONFIRM
9. Once the Formatting is complete, press the POWER key to confirm a REBOOT
10. The device will reboot and start the normal power up sequence

Moto g4 plus not accepting Gmail address used to sync device
I managed to factory reset my Moto g4 plus phone...but after rebooting the phone and trying to set up the phone again, it did not accept the Gmail address which I had used to sync the device earlier...is there any way to bypass this requirement so that I can start using the phone again ?

Power button not working

Hi all,
The power button of my atrix 2 is not working. I want to renap it to camera button, with sane fuctionality. I have tried using button remapper by it doesn't have option for camera button. I have tried searching in forums too but didnt find right answer as they were for other devices and also i want to use the camera button in recovery too. There was some script i came across some time ago but cudnt find it
Please help.
Its urgent
Sent from my MI 3W using XDA Free mobile app

Solved (^_^)
farzii said:
Hi all,
The power button of my atrix 2 is not working. I want to renap it to camera button, with sane fuctionality. I have tried using button remapper by it doesn't have option for camera button. I have tried searching in forums too but didnt find right answer as they were for other devices and also i want to use the camera button in recovery too. There was some script i came across some time ago but cudnt find it
Please help.
Its urgent
Sent from my MI 3W using XDA Free mobile app
Click to expand...
Click to collapse
Welcome to A2 section farzii
there is no working method for making camera button to work as a power button, don't waste your time cause I've searched and tried a lot of those mapping methods and Xposed modules....THE ONLY WAY to save your trickle power button is to use volume rocker (buttons) as a power button, they works great and you will even get 2 power buttons (volume UP) and (volume DOWN).
The method is really simple...but first you've to root your A2 (you can search the help forum for HOW TO)
2) install Xposed framework (xposed.installer_v32_de4f0d) is the latest version.
3) install (XposedInstallerStaticBusyBox_v1) if you're on a custom rom.
4) Installation of the framework:
Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
Reboot.
5) install xposed additions module (com.spazedog.xposed.additionsgb).
6) now open Xposed and activate xposed additions module.
7) Reboot again.
8) open xposed additions and select "Buttons" then "Add new Key".
9) now press volume up (or down).
10) a new button will be added called volume up (press it and choose "add new condition" then press "Screen off"
11) a new option will appear called "SCREEN OFF no active condition" now press it to choose the condition
12) Now activate the "Click Action" option by pressing its right (check-in) mark then choose it and select "Power Key 26"
voila! you've a new power button :highfive:
if you want to set the volume down also just do the same above but when prompt to ask for pressing the key just press vol. down
To make it easier for you....all file required are provided in the attachments :angel:

رامز said:
Welcome to A2 section farzii
there is no working method for making camera button to work as a power button, don't waste your time cause I've searched and tried a lot of those mapping methods and Xposed modules....THE ONLY WAY to save your trickle power button is to use volume rocker (buttons) as a power button, they works great and you will even get 2 power buttons (volume UP) and (volume DOWN).
The method is really simple...but first you've to root your A2 (you can search the help forum for HOW TO)
2) install Xposed framework (xposed.installer_v32_de4f0d) is the latest version.
3) install (XposedInstallerStaticBusyBox_v1) if you're on a custom rom.
4) Installation of the framework:
Launch the Xposed Installer, go to the "Framework" section and click on "Install/Update"
Reboot.
5) install xposed additions module (com.spazedog.xposed.additionsgb).
6) now open Xposed and activate xposed additions module.
7) Reboot again.
8) open xposed additions and select "Buttons" then "Add new Key".
9) now press volume up (or down).
10) a new button will be added called volume up (press it and choose "add new condition" then press "Screen off"
11) a new option will appear called "SCREEN OFF no active condition" now press it to choose the condition
12) Now activate the "Click Action" option by pressing its right (check-in) mark then choose it and select "Power Key 26"
voila! you've a new power button :highfive:
if you want to set the volume down also just do the same above but when prompt to ask for pressing the key just press vol. down
To make it easier for you....all file required are provided in the attachments :angel:
Click to expand...
Click to collapse
Thanks for your help.
I m sorry,but i have already tried this.Through this method i can only lock or wake up the screen.WHat i m looking for is power off anfd power on the device with camera or any other key.

farzii said:
Thanks for your help.
I m sorry,but i have already tried this.Through this method i can only lock or wake up the screen.WHat i m looking for is power off anfd power on the device with camera or any other key.
Click to expand...
Click to collapse
hmmm...you can power off the device using "power dialog" shortcut in the status bar in 4.4 kitkat roms but while phone is off it's technically impossible to set another button to power on the device as power button is the only button connected to the power circuit inside the phone.

[ROOT/CWM] Samsung Galaxy Star Pro/Plus

This is a Clear guide to Root your Device.
**note: this will also fix your device if it is stuck in white screen.
First download the file attached below before proceeding into the steps/guide.
**(if you didn't have Samsung USB Driver you can search it on google )
1. Extract the "ROOT - RECOVERY FIX GT-S7262.zip".
2. Place "UPDATE-SuperSU-v2.16.zip" to your SD Card.
3. Open Odin3 v3.07.
4. Click "PDA" then choose recovery.tar.
5. Power off your device and go to download mode (power button + menu + volume down) then press volume up to continue.
6. Connect the USB to your phone.
7. Uncheck the "Auto Reboot" option.
8. Press start. It should be showing "Reset" or "Pass" if it is Done
9. Long press the Power Button to shutdown.
10. Go to Recovery mode (power button + menu + volume up)
11. Choose "Install zip from sdcard" (press power button to confirm)
12. Then " Choose zip from sdcard"
13. Then find where you placed in your sdcard the "UPDATE-SuperSU-v2.16.zip"
14. Then choose " -Yes"
15. Then go back and choose "reboot system now"
Tadaaaa~ ! your Device is now rooted
IF IT STILL WHITESCREEN THEN DO THIS :
*First you need empty SDcard, just put "UPDATE-SuperSU-v2.16.zip" in your SDcard
*Then boot to recovery( power + volume up + home, relase home when you see samsung)
*Then the phone will boot in white screen
*After getting white screen just wait for 15 sec letting CWM to load
*Now you are in main screen of cwm but you can not see it.
*Then Do this following steps.
1. press volume down
2. press power twice
3. Press volume up twice
4. Press power
5. Press volume down 7 times
6. Press power
7. Wait a minute and press back button a few times and press power button to reboot.
**Hit Thanks if i helped you
**Sorry for my bad english