Related
I'm having issues getting recovery to work on a Verizon version xoom. I first flashed CWM version 4.0.0.4. The first time I tried to boot into it, it was stuck on the android with the red triangle for a long time before finally getting into it (coincidentally when I was hitting the volume key, don't know if that's related). Anyway, since then I haven't been able to get into it. It will be suck on the red triangle screen for a minute or two before rebooting into the stock rom (I'm running stock ICS). Since then, I've tried flashing the new TWRP 2.2.2 or whatever version it is and it has no effect. It's still doing the same thing. Any clue what's wrong?
So what I'm reading is suggesting that the android guy I'm seeing is the stock recovery. I'm not sure how that's happening. I'm installing the recovery using fastboot on my PC and being in the bootloader on my xoom. The prompts on both appear to confirm success.
I haven't tried this yet as I'm at work, but I think I've got the issue sorted. The following is what appears to be happening from what I've read.
1. I've still got the custom recovery stalled. When the Android guy pops up, one needs to press volume up to enter the options. Otherwise, it reboots.
2. The recovery flashes are taking because I'm booting back into the rom after a flash. The system's built in recovery protection is re-flashing the original recovery at that point.
3. To make my CWM/TWRP/whatever flash stick, I'll need to power down and then boot directly into the recovery.
I'll post again tonight to say if this works. Hopefully this thread can help out others who have the same issue.
If you don't get that to work fastboot img from link..
http://forum.xda-developers.com/showthread.php?t=1074979
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Hi guys,
So this is my first post but I've been on XDA for a long time. I've been looking for an answer to this problem, and I haven't been successful in finding a post that regards to my situation...
Ok so I just got my tablet today. I upgraded to JB and then I unlocked it using the asus unlocker. I attempted to install TWRP, but when I use .blob files and attempt to load into recovery it didn't work. Anyway, I looked around and I installed CWM recovery instead.
I installed v5.5.0.4 following this guide:
http://theunlockr.com/2012/05/25/how-to-install-clockworkmod-recovery-on-asus-transformer-tf300t/
Now, I notice it's written back in may of 2012 aka before jelly bean... anyway so I installed this using fast boot, and booted into recovery and it worked. I believe I installed the ICS version of CWM. I tried to install Clean Rom v3.3 and I just get bootloops. I can still boot into fastboot and clockwork mod fine.
I tried to install v6.0.1.4 via this thread http://forum.xda-developers.com/showthread.php?t=1846554
But once again if I boot into recovery it just does nothing and reboots after a few seconds.
I re-installed v5.5.0.4 and I can wipe data/install everything just as I normally would, and I still have access to Fastboot. Can I get some help on how I can 1 install the correct CWM and 2 install a working rom? I don't think I bricked my device just yet since I can still flash in fastboot etc.
Thanks guys!
You cant't wipe data from bootloader menu, If you do that, you will get unrecoverable brick.
Sorry I believe I mislead you -> I wiped data from within CWM.
Anyway, I used this thread:
http://forum.xda-developers.com/showthread.php?t=1757077
I went back to stock and I think i'll stay there for a little while longer, this process made me nervous (I've rooted my thunderbolt, droid DNA, galaxy tab 2 7" and my friends phones) so anyway I believe I installed the wrong CWM and that caused errors trying to install a JB rom on a ICS CWM... If you have any insight let me know...
undergfx said:
Hi guys,
So this is my first post but I've been on XDA for a long time. I've been looking for an answer to this problem, and I haven't been successful in finding a post that regards to my situation...
Ok so I just got my tablet today. I upgraded to JB and then I unlocked it using the asus unlocker. I attempted to install TWRP, but when I use .blob files and attempt to load into recovery it didn't work. Anyway, I looked around and I installed CWM recovery instead.
I installed v5.5.0.4 following this guide:
http://theunlockr.com/2012/05/25/how-to-install-clockworkmod-recovery-on-asus-transformer-tf300t/
Now, I notice it's written back in may of 2012 aka before jelly bean... anyway so I installed this using fast boot, and booted into recovery and it worked. I believe I installed the ICS version of CWM. I tried to install Clean Rom v3.3 and I just get bootloops. I can still boot into fastboot and clockwork mod fine.
I tried to install v6.0.1.4 via this thread http://forum.xda-developers.com/showthread.php?t=1846554
But once again if I boot into recovery it just does nothing and reboots after a few seconds.
I re-installed v5.5.0.4 and I can wipe data/install everything just as I normally would, and I still have access to Fastboot. Can I get some help on how I can 1 install the correct CWM and 2 install a working rom? I don't think I bricked my device just yet since I can still flash in fastboot etc.
Thanks guys!
Click to expand...
Click to collapse
My suggestion is to flash the latest stock JB blob.
fastboot -i 0x0B05 flash system blob
fastboot -i 0x0B05 reboot
Once you get it sorted then flash the latest twrp for jb.
Now, when I try flashing blobs and I go to boot into RCK (I believe that's the term...) it just reboots the tablet instead of booting into recovery.
Android software is out of my element, if this was some C (somewhat similar to C) or Matlab I would better understand (I'm a senior Mechanical Engineer in college)
Edit:
Ah didn't see your post. I did what you recommended, and actually, while my device said it was on 4.1.1 JB, when I hold pwr/vol down I see a completely different menu now than last time, so I wonder if perhaps my OTA didn't correctly load everything from the firmware update hmm...
undergfx said:
Now, when I try flashing blobs and I go to boot into RCK (I believe that's the term...) it just reboots the tablet instead of booting into recovery.
Android software is out of my element, if this was some C (somewhat similar to C) or Matlab I would better understand (I'm a senior Mechanical Engineer in college)
Click to expand...
Click to collapse
The same way you flashed cwm.
Windows? Start - in search type cmd - press enter
In the cmd window cd to the directory with fastboot.
Hook cable between tablet and usb port on computer.
On tablet hold power and volume down till you see the bootloader menu.
Down volume till you are at the usb symbol - then volume up.
This should put you into fastboot mode - use the commands above.
Wait till the first command completes before you give the second command.
[INDEX][04 Feb 2013]TF300T & TG-INDEX of Roms/Dev Guides/Kernels/Recoveries/etc. You will find the stock firmware here as well as most other needs.
You will have to unzip to get the blob which you should place in the directory with fastboot.
Thank you very much.
So after flashing the most resent blob, I successfully installed CWM recovery and successfully flashed a rom. I'm not sure what the issue was before. Thank you for the help! much appreciated.
undergfx said:
Thank you very much.
So after flashing the most resent blob, I successfully installed CWM recovery and successfully flashed a rom. I'm not sure what the issue was before. Thank you for the help! much appreciated.
Click to expand...
Click to collapse
You're welcome.
Good Luck!
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
stuck on animation loop
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
shadowarez said:
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
Click to expand...
Click to collapse
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
didnt you install clockwork mod first?
slap_shot_12 said:
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
Click to expand...
Click to collapse
the thing i found showed me to installed the clockwork mod first before i did any flashing, i rooted device then i flashed once clockwork mod was installed, i had to root, then install rom manager and goo manager, from within there i installed the clockwork recovery script/mod then i proceeded to flash chromi-X DEODEX.
Did you flash the correct bootloader? I had the same problem, look for my posts in the last few pages of ChromiX.
Here: http://forum.xda-developers.com/showpost.php?p=41658701&postcount=2716
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
buhohitr said:
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
Click to expand...
Click to collapse
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
slap_shot_12 said:
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
Click to expand...
Click to collapse
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
You are truly a god among men.
buhohitr said:
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
Click to expand...
Click to collapse
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Somehow the stock recovery was reinstalled on your tablet, thus letting this method work. It however does not on CWM or TWRP. All you did was manually reinstall a stock rom back onto your tablet. How it got the stock recovery is beyond me unless you flashed a stock ROM from CWM and didnt realize what you were installing.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Since the JB 4.2.1 upgrade, this is the most reliable method to install Asus full stock firmware. Also, since you're unlocked, let root the device by go here http://forum.xda-developers.com/showthread.php?t=2230763 download the tool and root it. Once rooted, I suggest that you should install TWRP custom recovery, by download Goomanager from the market, open the app and tab on the 3 little boxes on the top right hand corner, select "install recovery scripts" , this will shutdown your device and install custom TWRP recovery script, once this installed, you can download "rebooter" from the market and this app has many options, one of them is allowed you easily boot into custom recovery.
I rooted my MT4GS a few months ago but stuck with the stock ROM. I decided I wanted to try out the CyanogenMod 9.1 ICS ROM. I followed the following steps:
1) Installed ROM Manager.
2) ROM Manager indicated a newer version of ClockworkMod Recovery and I installed it (5.0.2.7).
3) Using ROM Manager, did a full backup of the current ROM. All went well.
4) Using ROM Manager, downloaded and installed CyanogenMod 9.1.0 stable-doubleshot. I specified to wipe the data and cache partitions. The installation seemed to go normally.
When the phone rebooted, it was stuck at the logo screen. Had to remove the battery to turn it off. Tried a couple times, still the same.
Since I had the backup, I decided I would use CWM to restore the old ROM.
When I boot into recovery mode, it shows CWM 5.0.2.7, but whatever option I try to choose from the recovery menu, The screen just goes blank with the CWM logo in the middle and nothing else happens. Hitting the power button returns me to the menu, but no option works, even power down or reboot. It just goes back to the CWM logo again and I have to remove the battery to shut it down.
So, I thought I would try using fastboot to flash the ROM again. When I boot the phone into the boot loader and select fastboot, then plug the phone in via USB, nothing happens. Windows does not see the phone and ADB or fastboot don't see it either. It's not a driver issue, as the computer is still setup from when the computer was rooted and I connect the phone all the time with no problems.
When the phone is off and plugged into USB or the charger, I still get the charging light, though it goes off after about 10 seconds, then comes back on and cycles like that.
Is there anything I can try at this point, or is my phone bricked? It seems like I followed all the steps correctly. Is there an update.zip I can put in the root folder and see if it picks it up?
Any help would be appreciated.
brucehvn said:
I rooted my MT4GS a few months ago but stuck with the stock ROM. I decided I wanted to try out the CyanogenMod 9.1 ICS ROM. I followed the following steps
...
Click to expand...
Click to collapse
Ok, after rebooting Windows, I was able to get the USB connection to the phone to work in fastboot. It seems I missed the step described in this thread:
http://forum.xda-developers.com/showthread.php?t=1508556
which states with S-ON you must flash the boot.img separately. I did that via fastboot and the phone boots into cyanogenmod now.
However, I still seem to have the issue with clockwordmod recovery. As long as I do the recovery functions from rom manager, everything is fine, but when I manually boot into the recovery menu, I get the same behavior of any choice from the menu just blanks the screen except for the CWM logo and nothing happens. I tried reflashing the recovery image using fastboot, but still no go.
brucehvn said:
However, I still seem to have the issue with clockwordmod recovery. As long as I do the recovery functions from rom manager, everything is fine, but when I manually boot into the recovery menu, I get the same behavior of any choice from the menu just blanks the screen except for the CWM logo and nothing happens. I tried reflashing the recovery image using fastboot, but still no go.
Click to expand...
Click to collapse
This is solved also. Seems on the MT4GS, the trackball is the selection button. The power button appears to only be a back button.
What a thread! Two nicely phrased problem definitions, two well explained solutions, and all from the same guy. Sorry we weren't able to help directly, but you obviously found the answers you needed elsewhere in the forum. And you updated the title as well to show it was solved. Thanks.
A couple of months back, I had unlocked the bootloader (I had stock 4.2.1) and rooted this tablet in order to put Cyanogenmod on it. The current version was CM10.2 (nightlies). I was able to update to different nightly versions and then to the stable 10.2 version. Recently, I saw CM11 nightly versions beginning to appear, so I thought I'd install it.
Using TWRP 2.6.1.0, I had been able to do all of my CM10.2 updating. However, with CM11, the initial flash didn't work (I did clear cache and Dalvik), and so I thought I had to update TWRP. I downloaded TWRP 2.6.3.0 for the TF300T (both .img and .blob) and tried to fastboot them to my device. .img did not work, but then the blob fastboot was able to install TWRP, however, there was a password lock. Reading about this online, I thought I just had to reflash TWRP 2.6.3.0. I tried that and got the same password issue.
Then, I thought that CWM would be a better option (although I thought I may have seen things about it not playing well with the 4.2.1 bootloader...). I flashed a version of that (not exactly sure what version... (which may be the source of my problem) but it was for the TF300T...). Then, upon rebooting, it got stuck on the ASUS loading screen (with "The Device is UnLocked." in the corner). So then I tried rebooting into the recovery, but then I couldn't access the recovery menu from power + vol. down buttons anymore.
Basically, what I can do now is restart the tablet (via holding the power button or pressing the reset slot), but it always gets stuck on the ASUS screen, or I can enter APX mode, but don't think that'll do much good since I don't have nvFlash installed...
Is my tablet bricked?
Thanks in advance!
PS - I saw some solutions that required opening up the tablet. I would be okay with doing that, but only as a last resort!
Quevvy said:
A couple of months back, I had unlocked the bootloader (I had stock 4.2.1) and rooted this tablet in order to put Cyanogenmod on it. The current version was CM10.2 (nightlies). I was able to update to different nightly versions and then to the stable 10.2 version. Recently, I saw CM11 nightly versions beginning to appear, so I thought I'd install it.
Using TWRP 2.6.1.0, I had been able to do all of my CM10.2 updating. However, with CM11, the initial flash didn't work (I did clear cache and Dalvik), and so I thought I had to update TWRP. I downloaded TWRP 2.6.3.0 for the TF300T (both .img and .blob) and tried to fastboot them to my device. .img did not work, but then the blob fastboot was able to install TWRP, however, there was a password lock. Reading about this online, I thought I just had to reflash TWRP 2.6.3.0. I tried that and got the same password issue.
Then, I thought that CWM would be a better option (although I thought I may have seen things about it not playing well with the 4.2.1 bootloader...). I flashed a version of that (not exactly sure what version... (which may be the source of my problem) but it was for the TF300T...). Then, upon rebooting, it got stuck on the ASUS loading screen (with "The Device is UnLocked." in the corner). So then I tried rebooting into the recovery, but then I couldn't access the recovery menu from power + vol. down buttons anymore.
Basically, what I can do now is restart the tablet (via holding the power button or pressing the reset slot), but it always gets stuck on the ASUS screen, or I can enter APX mode, but don't think that'll do much good since I don't have nvFlash installed...
Is my tablet bricked?
Thanks in advance!
PS - I saw some solutions that required opening up the tablet. I would be okay with doing that, but only as a last resort!
Click to expand...
Click to collapse
Try using fastboot to install this version of TWRP: http://forum.xda-developers.com/showpost.php?p=48512729&postcount=16
It will only work if you were on 10.6.1.15 or above. It allows flashing CM11.
cmendonc2 said:
Try using fastboot to install this version of TWRP: http://forum.xda-developers.com/showpost.php?p=48512729&postcount=16
It will only work if you were on 10.6.1.15 or above. It allows flashing CM11.
Click to expand...
Click to collapse
The thing is, I can't get into fastboot the typical way; pressing power and volume down does not go into the fastboot mode like it did before. I can get into APX mode, though. Can I use that to flash a recovery? I haven't been able to find a way of doing that yet…
Quevvy said:
The thing is, I can't get into fastboot the typical way; pressing power and volume down does not go into the fastboot mode like it did before. I can get into APX mode, though. Can I use that to flash a recovery? I haven't been able to find a way of doing that yet…
Click to expand...
Click to collapse
No, you need nvflash backups to use APX mode. Since you can't get to the recovery menu, I can't think of any other solutions....?
Same here
I'm in the same state after trying to update from 10.2 to 11. Just sits at the ASUS logo screen. No fastboot or recovery. I can get it to turn off by holding the up volume and inserting a paper clip into the reset switch hole. Otherwise I have been totally unsuccessful in getting it to do anything else. At this point I'm not adverse to opening it up. Do you have the link to the solution you found that required opening the tablet? Maybe I'll give it a try.
boggessb said:
I'm in the same state after trying to update from 10.2 to 11. Just sits at the ASUS logo screen. No fastboot or recovery. I can get it to turn off by holding the up volume and inserting a paper clip into the reset switch hole. Otherwise I have been totally unsuccessful in getting it to do anything else. At this point I'm not adverse to opening it up. Do you have the link to the solution you found that required opening the tablet? Maybe I'll give it a try.
Click to expand...
Click to collapse
You would have to open it and replace the motherboard with a new one like this:
http://forum.xda-developers.com/showthread.php?t=2368372
With a new part like this:
http://www.ebay.com/itm/like/390706401658?lpid=82