I'm having issues getting recovery to work on a Verizon version xoom. I first flashed CWM version 4.0.0.4. The first time I tried to boot into it, it was stuck on the android with the red triangle for a long time before finally getting into it (coincidentally when I was hitting the volume key, don't know if that's related). Anyway, since then I haven't been able to get into it. It will be suck on the red triangle screen for a minute or two before rebooting into the stock rom (I'm running stock ICS). Since then, I've tried flashing the new TWRP 2.2.2 or whatever version it is and it has no effect. It's still doing the same thing. Any clue what's wrong?
So what I'm reading is suggesting that the android guy I'm seeing is the stock recovery. I'm not sure how that's happening. I'm installing the recovery using fastboot on my PC and being in the bootloader on my xoom. The prompts on both appear to confirm success.
I haven't tried this yet as I'm at work, but I think I've got the issue sorted. The following is what appears to be happening from what I've read.
1. I've still got the custom recovery stalled. When the Android guy pops up, one needs to press volume up to enter the options. Otherwise, it reboots.
2. The recovery flashes are taking because I'm booting back into the rom after a flash. The system's built in recovery protection is re-flashing the original recovery at that point.
3. To make my CWM/TWRP/whatever flash stick, I'll need to power down and then boot directly into the recovery.
I'll post again tonight to say if this works. Hopefully this thread can help out others who have the same issue.
If you don't get that to work fastboot img from link..
http://forum.xda-developers.com/showthread.php?t=1074979
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Related
Think I rooted it , tried to go into recovery, now I'm stuck. anyone here? right now? maybe can give me live assistance, over IM of some sort? pleaseeeeeeeeee
Looks like you're in the stock recovery, and the clockwork recovery mod was overwritten (it does that every time you reboot).
you can refer to this post for instructions on flashing the cw recovery again and rooting: http://forum.xda-developers.com/showthread.php?t=931865
it's basically just a fastboot command.
What do you mean you think you rooted it
Sent from my trinity nexus s
Also someone posted Odin with stock image...perfect for situations like this
http://forum.xda-developers.com/showthread.php?t=947950
i don't think we need to go the Odin way just yet
it sounds like he's in the stock recovery, he just need to do the fastboot, and all that stuff to get things going
The box pouring an arrow onto an android and/or the exclamation mark android is stock recovery. From there, just hit power first, hold it, then hit up arrow, you should get into stock recovery.
If that didn't work, pull the battery and let the phone boot normally. IF you're on 2.3.2 or higher, the install-recovery.sh script will replace the stock recovery in case you some how munged it up.
Reboot into fastboot with the volume key and power key, then when the box with the arrow appears do the power key hold and press the volume up, you should be in stock.
As others said, you can also just fastboot boot or fastboot flash the clockwork recovery image.
You're phone's not bricked, so no panic necessary.
edit: oh, and finally, if you actually succeeded in rooting, you could also just use ROM Mgr app to flash/boot to clockwork recovery, which is what you really should be using.
I'm trying to flash the Vegan-Tab ROM on the gTablet I just got. I installed the 1.1 bootloader and CM .8. Or, I think I did. When I power up using power and volume +, I never got a menu when I tried installing these. The green box just popped up, so I assumed it was installing, then it rebooted normally. So when I try to boot into recovery mode, it does the same thing, and the menu never comes up. Did I do something wrong?
I have a similar problem ... loaded CM7 safely, was working for a while, all good. Decided (stupidly) to update recovery from CWM and now, nothing I do can get it to boot into recovery! Not manually, not through software (boot to recovery) options...
Also, the viewsonic birds screen is gone, so I assume something bad happened to the bootloader.
Still boots to 'production' cleanly, just not recovery or bootloader. Help!
FIXED - had to nvflash back to stock and start over!
After I updated my (unrooeted/locked) Nexus S (9023) to 4.0.3 I wanted to try the 4.0.4 upgrade. After the 4.0.3 the recovery mode lost the backlight, so I figured the it was a good time to root.
I tried this one-click script to unlock. It worked and I installed CWMR and flashed the 4.0.4 upgrade. After a reboot the phone had ICS 4.0.4 and got root.
But not all is working. I lost the ability to get into the bootloader by pressing 'vol down.' & 'power'. The phone just starts normally.
The only way I can get into the bootloader, is to "reboot to bootloader" from a command line. If I choose recovery, I get a picture of an android at its back with a red ! (2105.dk/temp/img_1161.jpg). After two minutes it automatically reboots. What has gone wrong? What does it mean? And how can I fix it?
I'm new at this, so i'm out of ideas
try Vol up + power
Ahhh... now i'm feeling a bit stupid
Okay, i'm able to get into the bootloader, but the problem with the recovery still remains. (what does the picture mean? - 2105.dk/temp/img_1161.jpg)
I've tried both CWRM and TWRP. They seems to flash with no errors, but i still can not get them started from the bootloader (fastboot mode?).
Not sure if it's what you are looking for since I can't see the picture you are talking about but I think it's the recovery "security" screen. When you are there press power first and maintain it to press vol up, you should now be into the recovery...
Also remember stock rom has a script that overwrites any custom recovery with stock recovery each time the rom loads.
Yes, pressing [power] + [vol. up] at the recovery "security/error" screen, starts up a recovery.
I also didn't knew that the stock ROM overwrites the recovery. I never seen it mentioned any where else.
Thanks for the hints.
Okay, after learning how the stock OS trying to reinstall stock recovery, I managed to rename /etc/install-recovery.sh to *.bak
Now the stock recovery stays away, and CWM recovery stays on permanent.
Also, the error screen doesn't show up any more. (never found out what it means)
Has anyone else had this issue? I have loaded the CWM recovery, with success according the the message i get after loading it. I try to boot into recovery to flash my SU zip, and when i hold down the volume buttons and power to boot into recovery, i get a little android man with a red caution sign coming out of his chest. I did do some sort of Motorola OTA update before i loaded this recovery, wasnt sure if that was affecting it. Anyhow, it lets me go into recovery if I keep pressing buttons, but then when i try to run my SU zip, it says signature verification failed, and when in recovery, it doesnt say anything about it being CWM recovery. Any help is appreciated!
edit: When i am in recovery, at the very top, it says Android System recovery <3e>
does that mean my recovery didnt load properly?
Well I did a factory data reset, then flashed my recovery again and the custom recovery loaded and I was able to do the SU zip update. So I am guessing this means that the update is somehow messing with recovery loading? Thought this might be something good for you developers to know.
Assuming you're using the stuff from shabby's post that was put up not long after the phone was released, I've not yet seen anyone say that this still works after performing the Moto update.
Moved as this is not development therefore doesn't belong in the development forums.
Thanks
AvRS
OP, it sounds like you didn't flash CWM correctly the first time...
The behavior you describe is the stock recovery.
whitelightnin3006 said:
Has anyone else had this issue? I have loaded the CWM recovery, with success according the the message i get after loading it. I try to boot into recovery to flash my SU zip, and when i hold down the volume buttons and power to boot into recovery, i get a little android man with a red caution sign coming out of his chest. I did do some sort of Motorola OTA update before i loaded this recovery, wasnt sure if that was affecting it. Anyhow, it lets me go into recovery if I keep pressing buttons, but then when i try to run my SU zip, it says signature verification failed, and when in recovery, it doesnt say anything about it being CWM recovery. Any help is appreciated!
edit: When i am in recovery, at the very top, it says Android System recovery <3e>
does that mean my recovery didnt load properly?
Click to expand...
Click to collapse
The problem is that either the CWM recovery didn't take, or it did but when you updated, it reverted to stock recovery. I don't know which as I'm not familiar with the OTA you are referring to
Either way, you can try flashing CWM again and see if it takes
Sent from my PG06100 using xda premium
I installed the latest OTA update to my reverted back to stock, but still unlocked Q. CWM recovery and SuperSU worked on first try.
It sounds to me that CWM just didn't take. I remember reading something saying that the photon q will re-install the default recovery upon boot. It took a couple tries but I think what worked for me was flashing it through fastboot, then immediately rebooting into the recovery without ever letting the system boot up. After that it went right into CWM and has since gone there everytime.
Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?
Poursinet said:
Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?
Click to expand...
Click to collapse
Are you saying you are trying to flash a recovery or are you trying to GET to the stock recovery? If you are trying to get to the stock recovery, the key presses to get to it have changed.
Your best bet is to power off your phone. Then, press and hold power+vol up for a few seconds until you see the menu come up. Then, press vol down to highlight Recovery and then press the vol up button.
Eventually, you'll see the "Dead Andy". From there, press and hold vol down+vol up+power. You might have to do it a couple of times. Eventually, you'll be in the recovery but for the XT926, it's kind of hard to read because for some reason, they decided to make it dim.
No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.
Poursinet said:
No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.
Click to expand...
Click to collapse
Variable not supported comes up under some Windows, but it usually still works.
You never go straight to the bootloader when you reboot. You have to reboot the phone (or turn it off first) and then press and hold vol up+power. Then, from there, you use vol down to select recovery and then press vol up.
It never boots directly into the recovery unless you tell it to via an ADB command or from within a custom ROM that allows it.
Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?
Caliburno said:
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?
Click to expand...
Click to collapse
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I think this may be the problem I am having. I cant get my 926 to boot to recovery from fastboot after I load CWM recovery. Is there some trick?