Has anyone else had this issue? I have loaded the CWM recovery, with success according the the message i get after loading it. I try to boot into recovery to flash my SU zip, and when i hold down the volume buttons and power to boot into recovery, i get a little android man with a red caution sign coming out of his chest. I did do some sort of Motorola OTA update before i loaded this recovery, wasnt sure if that was affecting it. Anyhow, it lets me go into recovery if I keep pressing buttons, but then when i try to run my SU zip, it says signature verification failed, and when in recovery, it doesnt say anything about it being CWM recovery. Any help is appreciated!
edit: When i am in recovery, at the very top, it says Android System recovery <3e>
does that mean my recovery didnt load properly?
Well I did a factory data reset, then flashed my recovery again and the custom recovery loaded and I was able to do the SU zip update. So I am guessing this means that the update is somehow messing with recovery loading? Thought this might be something good for you developers to know.
Assuming you're using the stuff from shabby's post that was put up not long after the phone was released, I've not yet seen anyone say that this still works after performing the Moto update.
Moved as this is not development therefore doesn't belong in the development forums.
Thanks
AvRS
OP, it sounds like you didn't flash CWM correctly the first time...
The behavior you describe is the stock recovery.
whitelightnin3006 said:
Has anyone else had this issue? I have loaded the CWM recovery, with success according the the message i get after loading it. I try to boot into recovery to flash my SU zip, and when i hold down the volume buttons and power to boot into recovery, i get a little android man with a red caution sign coming out of his chest. I did do some sort of Motorola OTA update before i loaded this recovery, wasnt sure if that was affecting it. Anyhow, it lets me go into recovery if I keep pressing buttons, but then when i try to run my SU zip, it says signature verification failed, and when in recovery, it doesnt say anything about it being CWM recovery. Any help is appreciated!
edit: When i am in recovery, at the very top, it says Android System recovery <3e>
does that mean my recovery didnt load properly?
Click to expand...
Click to collapse
The problem is that either the CWM recovery didn't take, or it did but when you updated, it reverted to stock recovery. I don't know which as I'm not familiar with the OTA you are referring to
Either way, you can try flashing CWM again and see if it takes
Sent from my PG06100 using xda premium
I installed the latest OTA update to my reverted back to stock, but still unlocked Q. CWM recovery and SuperSU worked on first try.
It sounds to me that CWM just didn't take. I remember reading something saying that the photon q will re-install the default recovery upon boot. It took a couple tries but I think what worked for me was flashing it through fastboot, then immediately rebooting into the recovery without ever letting the system boot up. After that it went right into CWM and has since gone there everytime.
Related
After flashing the latest ROM I was messing around with (WajkIUI 2.1.6) the phone would crash and reboot within 30 seconds of booting up. The previous ROM that was running was FAUXMIUI_RG2xV2.0.0 (01/08/2011 [v2.0.0]OVERCLOCK) that was stable except for when I’d turn wi-fi on after being off for 8 hours or so phone would reboot.
I figured I would boot into ClockworkMod Recovery and restore one of the nandroid backups, I tried booting into recovery I found out that I could not. When I hold the volume down and press the power button I see the screen that says software update (like when flashing with OneClickRecoveryFlasher).
Whenever I flash a new ROM I will Wipe data/factory reset, wipe cache partition, and then wipe dalvik before installing zip. I’ve always run cyanogenmod nighties; FAUXMIUI_RG2xV2.0.0 was the first MIUI ROM I’ve used.
When I run OneClickRecoveryFlasher, I do not see any errors on the command prompt so I am assuming it was successful, or at least thinks it was.
I tried to Restore LG G2x Stock Recovery using OneClickRecoveryFlasher and then flashing v5.0.2.0 and still no ClockworkMod Recovery, also tried v4.0.1.5 and still no ClockworkMod Recover.
I then tried http://forum.xda-developers.com/showthread.php?t=1248644 and with that I was able to get back to stock 2.3.3, tried to use OneClickRecoveryFlasher to flash ClockworkMod, still no go.
I tried LG Mobile Update and that proceeded to install something, not really sure what the update was, after the update finished, phone rebooted into stock 2.3.3. Shut the phone down and tried to flash ClockworkMod and still nothing.
I did a hard reset following http://mobilephonerepairguides.blogspot.com/2011/04/lg-g2x-hard-reset.html
I also tried http://forum.xda-developers.com/showthread.php?t=1183168, that got me to stock 2.3.3 but I still could not boot in to ClockwordMod Recovery.
I’m having a hell of a time wrapping my head around what I screwed up. Did I somehow destroy the recovery partition, is that possible? Any ideas what I broke and how to fix it? Can I used adb to view the partition table, would that tell me if something was corrupt?
Any help and ideas would be appreciated, I have tried doing my due diligence and I apologize if I missed something obvious.
Thanks,
-Matt
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
If you did the LG Updater it returned your phone to stock everything, including recovery. You need to use NVFlash (One Click method okay) to reflash CWM and then you should be good to go.
When the phone is completely off, hold volume down, then hold the power button and don't let go of both until the second lg logo.
If you hold volume down too early it'll give you the software update screen.
Well that's embarrassing, thanks buru898 that did the trick and got me into CWM Recovery. I never remember holding the power button for that long but it worked and I'll remember that for next time.
Thanks
fcisco13 said:
Faux never made a miui
Did you nvflashed recovery? If no then do that first.
NVIDIA NEVER AGAIN!
Click to expand...
Click to collapse
Sorry, I only wrote in the actual zip file name, I meant RG2x-MIUI v2.1.6-MultiLang/Powered by Faux Kernels CM v0.4.8(01/08/2012)[v2.0.0].
Thanks
I'm having issues getting recovery to work on a Verizon version xoom. I first flashed CWM version 4.0.0.4. The first time I tried to boot into it, it was stuck on the android with the red triangle for a long time before finally getting into it (coincidentally when I was hitting the volume key, don't know if that's related). Anyway, since then I haven't been able to get into it. It will be suck on the red triangle screen for a minute or two before rebooting into the stock rom (I'm running stock ICS). Since then, I've tried flashing the new TWRP 2.2.2 or whatever version it is and it has no effect. It's still doing the same thing. Any clue what's wrong?
So what I'm reading is suggesting that the android guy I'm seeing is the stock recovery. I'm not sure how that's happening. I'm installing the recovery using fastboot on my PC and being in the bootloader on my xoom. The prompts on both appear to confirm success.
I haven't tried this yet as I'm at work, but I think I've got the issue sorted. The following is what appears to be happening from what I've read.
1. I've still got the custom recovery stalled. When the Android guy pops up, one needs to press volume up to enter the options. Otherwise, it reboots.
2. The recovery flashes are taking because I'm booting back into the rom after a flash. The system's built in recovery protection is re-flashing the original recovery at that point.
3. To make my CWM/TWRP/whatever flash stick, I'll need to power down and then boot directly into the recovery.
I'll post again tonight to say if this works. Hopefully this thread can help out others who have the same issue.
If you don't get that to work fastboot img from link..
http://forum.xda-developers.com/showthread.php?t=1074979
fastboot flash recovery recovery-Tiamat-R4c-100611-1150-cwm.img
Hi All,
I've looked all around for the answer to this and am thoroughly lost. I have the Verizon Galaxy S3 with VRALHE. I rooted it, then used EZ-Unlock 1.2 to unlock the phone, then installed Rom manager and flashed CWR. It says it installed 6.0.1.2 but when I try and go into recovery it only goes into Android Recovery. If I flash CWR and right away click the boot into CWR button it seems to go but after that it will only go into Android Recover both via Rom manager and holding Volume Up, Power and Home. Anyone know whats going on?
Thanks for your help!
If it does go into cwm the first time then after that stock there are two files you need to erase that basically reinstall the stock recovery on reboot. I can't recall them, but you could probably search here and find them. Or the easier way is busy flash a custom ROM n that first boot into cwm. By the way ez recovery is better for installing our recoveries, give it a shot.... It may sick without the extra stuff I just told you.
Sent from my SCH-I535 using xda app-developers app
Anyone know where to look into about the files that need to be deleted? I'm not finding much. EZ recovery worked the first reboot but returned to Android recovery after a reboot.
Boss428man said:
Anyone know where to look into about the files that need to be deleted? I'm not finding much. EZ recovery worked the first reboot but returned to Android recovery after a reboot.
Click to expand...
Click to collapse
I would recommend re-flashing Clockworkmod Recovery from EZ recovery, then using EZ recovery to boot into Clockworkmod Recovery, after your are in Clockworkmod Recovery select the "Reboot system" option, you should then be asked if you want to erase two files to make Clockworkmod Recovery stick permanently (At least until you flash a different recovery) select the "Yes" option, then after it has completed that task the phone should reboot, while it is rebooting boot into recovery and you should find that Clockworkmod Recovery is still installed.
I like to help, but Google stuff. This is what you would have found as the second result
/system/recovery-from-boot.p*
/system/etc/install-recovery.sh
Sent from my SCH-I535 using xda app-developers app
So to confirm to everyone, Deleting the 2 files above does work! So delete the files then re-flash CWR and restart that's it!
I wanted to thank everyone for the help!
Same problem but a little different
shimp208 said:
I would recommend re-flashing Clockworkmod Recovery from EZ recovery, then using EZ recovery to boot into Clockworkmod Recovery, after your are in Clockworkmod Recovery select the "Reboot system" option, you should then be asked if you want to erase two files to make Clockworkmod Recovery stick permanently (At least until you flash a different recovery) select the "Yes" option, then after it has completed that task the phone should reboot, while it is rebooting boot into recovery and you should find that Clockworkmod Recovery is still installed.
Click to expand...
Click to collapse
I have the same problem sorta, my phone instead of going into CWR it goes into Android system Recovery, and it asks me for an update, I was trying to root my phone but it won't even let me go into recovery so I can root it. Do you know why it's asking me this? Also idk if this helps but the android dude is in the background with an open stomach and a triangle and an exclamation mark in it. Hope my details were helpful, thanks.
Wizardtech-101 said:
I have the same problem sorta, my phone instead of going into CWR it goes into Android system Recovery, and it asks me for an update, I was trying to root my phone but it won't even let me go into recovery so I can root it. Do you know why it's asking me this? Also idk if this helps but the android dude is in the background with an open stomach and a triangle and an exclamation mark in it. Hope my details were helpful, thanks.
Click to expand...
Click to collapse
What rooting guide did you follow? Did you flash Clockworkmod Recovery yet? If you can provide me with this information I can try help you further. If you haven't flashed Clockworkmod Recovery yet then you will be presented with the normal stock Android recovery system that you described.
Wizardtech-101 said:
I have the same problem sorta, my phone instead of going into CWR it goes into Android system Recovery, and it asks me for an update, I was trying to root my phone but it won't even let me go into recovery so I can root it. Do you know why it's asking me this? Also idk if this helps but the android dude is in the background with an open stomach and a triangle and an exclamation mark in it. Hope my details were helpful, thanks.
Click to expand...
Click to collapse
Ummm... You do not necessarily go into recovery to root it. Have you installed and used Odin through your PC? You say you are trying to root your phone, so before you get ahead of yourself trying to flash recoveries I recommend reading up a little bit, it is very important you follow directions specifically or you will brick your device....
http://forum.xda-developers.com/showthread.php?t=2046439
There is even a video watch it while you root your phone, and pause along with it.
If you have already done some of this, and done any of it wrong there are steps to recover through Odin.
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
stuck on animation loop
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
shadowarez said:
this gonna sound odd but i had exact same prob when i rooted and flashed chromix rom. it went. what i did was flash it once with the rom with secure wipe, then i flashed again. and it got stuck at optimizing apps,then i tried reflashing couldnt get it to boot, what i ended up doing was using clockwork mod to factory reset my tablet, then had to restart, and reflash, this time it actually got to main screen. dont let it discharge/reboot for awhile as im bout to post a issue im having with it. but thats what i did to make it work for me.
Click to expand...
Click to collapse
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
didnt you install clockwork mod first?
slap_shot_12 said:
I'm not sure I understand --- how do I get to the clockwork mod if i can't get past the startup animation? And I've tried a bunch of roms with secure wipe and i get an error from every one of them.
Click to expand...
Click to collapse
the thing i found showed me to installed the clockwork mod first before i did any flashing, i rooted device then i flashed once clockwork mod was installed, i had to root, then install rom manager and goo manager, from within there i installed the clockwork recovery script/mod then i proceeded to flash chromi-X DEODEX.
Did you flash the correct bootloader? I had the same problem, look for my posts in the last few pages of ChromiX.
Here: http://forum.xda-developers.com/showpost.php?p=41658701&postcount=2716
slap_shot_12 said:
I unlocked and rooted my tablet yesterday and everything appeared to be working fine. After using it for a couple hours and restarting it a few times it stopped working and is now locked in a boot loop. When I try boot the tablet it comes on and gets to the animation where the glint of light goes across the Asus logo but it does not finish and instead it stops there and I get the moving circles at the bottom. I've left it running there for several hours and it just hangs.
I've tried erasing the data and booting to linux but the same thing happens when I try either of those.
I've also tried flashing a number of different ROMs, but all that happens is it starts installing and then I get the Android guy on his side error screen.
I hadn't done anything to the ROM and was still running 10.6.1.14.4. I even downloaded that same ROM from http://forum.xda-developers.com/showthread.php?t=2266519 but I get the same error message when I try flash that ROM.
I would really, REALLY appreciate any ideas at all - and thanks in advance for any suggestions.
Click to expand...
Click to collapse
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
buhohitr said:
Seems to me you installed Asus factory stock rom JB 4.2.1 (10.6.1.14.4), which means you have the latest bootloader, then you unlocked and rooted your device, however, you never installed any custom recovery like TWRP or CWM (clockmod). Now your device is boot looping. You need to boot into stock recovery by turn off your device, hold volume down and power button until you see white text on the screen, now release both buttons, you should see 3 icons (RCK, Android and wipe data). NOW you are in fastboot mode. Let me know at least you can get that far, before we continue....
Click to expand...
Click to collapse
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
slap_shot_12 said:
buhohitr -- You're exactly right. I can boot into stock recovery. When I select Android or wipe data it goes back to the animation screen and hangs up. When I select RCK it goes to the Android guy and says installing update but then it show him fallen over and the word Error. I've tried RCK with a memory card that has a number of different ROMs on it but the same thing keeps happening.
Click to expand...
Click to collapse
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
You are truly a god among men.
buhohitr said:
Give this a try, the factory Asus firmware zip file that you downloaded, unzip the file, you should see another zip file, rename this new zip file to "EP201_768_SDUPDATE.zip" (without quotation), then copy it to the root of your sdcard then boot into stock recovery and execute the RCK again. Make sure you don't have any other zips laying around in the root of your sdcard.
Click to expand...
Click to collapse
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Somehow the stock recovery was reinstalled on your tablet, thus letting this method work. It however does not on CWM or TWRP. All you did was manually reinstall a stock rom back onto your tablet. How it got the stock recovery is beyond me unless you flashed a stock ROM from CWM and didnt realize what you were installing.
Tylor
Sent from my ASUS Transformer Pad TF700T using Tapatalk HD
slap_shot_12 said:
THIS WORKED!!! Thanks so much. I was really worried I had bricked it.
So now one last question --- WHY did that work? Is there somewhere I could go to read up on this kind of stuff? I've tried surfing the XDA forum but there's a lot of stuff like this where someone gets there problem solved, but not much explaining why something worked so I can learn more about it.
Click to expand...
Click to collapse
Since the JB 4.2.1 upgrade, this is the most reliable method to install Asus full stock firmware. Also, since you're unlocked, let root the device by go here http://forum.xda-developers.com/showthread.php?t=2230763 download the tool and root it. Once rooted, I suggest that you should install TWRP custom recovery, by download Goomanager from the market, open the app and tab on the 3 little boxes on the top right hand corner, select "install recovery scripts" , this will shutdown your device and install custom TWRP recovery script, once this installed, you can download "rebooter" from the market and this app has many options, one of them is allowed you easily boot into custom recovery.
Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?
Poursinet said:
Hi,
just got time to update my 2nd XT925 to KK (RSD'd back from CM11 JBBL to stock SFR rom, let the phone find its update and apply it, everything went fine).
But whatever KK recovery I try to flash, it gives me an exclamation mark and nothing else (I'm unlocked, yes).
Don't know what's happening here. Can someone helps please ?
Click to expand...
Click to collapse
Are you saying you are trying to flash a recovery or are you trying to GET to the stock recovery? If you are trying to get to the stock recovery, the key presses to get to it have changed.
Your best bet is to power off your phone. Then, press and hold power+vol up for a few seconds until you see the menu come up. Then, press vol down to highlight Recovery and then press the vol up button.
Eventually, you'll see the "Dead Andy". From there, press and hold vol down+vol up+power. You might have to do it a couple of times. Eventually, you'll be in the recovery but for the XT926, it's kind of hard to read because for some reason, they decided to make it dim.
No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.
Poursinet said:
No (but thanks anyway). What I tried to was only to install a KK recovery for CM11.
I successed but I had 2 problems mixed: the 1st one was that the Linux version of fastboot (or mfastboot) did'nt work with the new bootloader. Both were complaining about "(bootloader) Variable not supported! ". Had to find some old laptop with Windows installed to use it to flash the recovery without error.
But even then if I just let the phone reboot, I would'nt get the new recovery (just the stock one after the keypress you speak about). I had to go straight from bootloader screen to the recovery (by manually rebooting) to get it work. Looks like the standard boot just restored the stock recovery each time I tried.
Thanks anyway, it's working now.
Click to expand...
Click to collapse
Variable not supported comes up under some Windows, but it usually still works.
You never go straight to the bootloader when you reboot. You have to reboot the phone (or turn it off first) and then press and hold vol up+power. Then, from there, you use vol down to select recovery and then press vol up.
It never boots directly into the recovery unless you tell it to via an ADB command or from within a custom ROM that allows it.
Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
Keep in mind, the stock recovery will override the custom recovery if you don't immediately boot back into recovery. Flash recovery, when that's done, press power to shutdown, and use the method Bolski described to boot into recovery.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?
Caliburno said:
Let me see if i undestood.
You say that if you don't boot right into recovery, the stock one will overwrite CWM/TWRP. So i understand that, after very reboot you must reflash recovery if you want to use it again.
Or am I missing something?
Click to expand...
Click to collapse
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk
RikRong said:
It won't reflash every time. You only need to boot straight into recovery the first time, so that the update binary completes. After the first time, you'll be good.
Sent from my HTC6525LVW using Tapatalk
Click to expand...
Click to collapse
I think this may be the problem I am having. I cant get my 926 to boot to recovery from fastboot after I load CWM recovery. Is there some trick?