I bought this phone off craigslist. It was locked to bell so I had it unlocked to rogers. When it boots up it says not for resale!
about phone says :
os version: 8.0.9903.10
Firmware: 1532.20.10006.666
Hardware: 0002
Radio: 1.10.32.19.19_3_15.39.32.19
Bootloader: 0.0.1532.20(156287)
Is their any chance to update or did I get screwed?
Related
Hello!
I have the following problem. After flashing my HTC 7 Mozart began to work badly (during a conversation locks the screen without the possibility of unlocking)
IN Bootloader:
MOZA100 SS-BC (4K)
SPL - 1.32.2250.1 (119496)
MicroP (LED) 0x07
TOUCH c1 (v69)
SD SANDICK 15193MB
Partition Info-v211v413
For the unknown reason phone Moza100 identifier, but should be PD67100. Tried to flash in different ways, including through GoldCard
The information about the phone:
OS version 7.0.7392.0
Firmware revision number: 2250.21.13201.111
Hardware revision: NA
Radio soft. 5.65.09.25_22_45_50.21U
Radio hard. 0.0.0.0
Bootloader 1.32.2250.1 (119496)
Chip SOC ver. 2.2.5.0
To solve this problem as I understand it, you need to change the firmware identifier PD67100 on MOZA100.
Could you change the firmware in the German "RUU_Mozart_TMO_DE" identifier on MOZA100 and sign it, or say how to do it.
I would be very grateful.
I hope to receive the help from Ansar.
Sorry for my english =P
I have the same question but from pd67100 to pd671000.
I have the same problem
Could you please tell me if it is possible to install RSPL/HSPL on my HTC Mozart
Phone details....
OS version: 7.0.7392.0
Firmware revision number: 250.09.13001.401
Hardware revision number: 0004
Radio software version: 5.54.09.21_22.33b.50.10U
Radio hardware version: A.102.0.D4
Bootloader version: 1.30.2250.1(117833)
Chip SOC version: 2.2.5.0
Thanks
I see that you have bootloader 1.30 and that looking good but you check what is writing in bootloader mode (device off, press and hold vol down (-) and press on). Write what you see on three colours screen (what text) ?
Yeh sure its....
PD67*** SS-BC (4K)
SPL-1.30.2250.1(117833)
MicroP(LED) 0x07
TOUCH C1(v69)
Ok you can install RSPL/HSPL, but you must remember that choose the right version SPL when you see question about during the install HSPL.
hey guys, can i install RSPL/HSPL?
my info:
PD67### SS-BC (4K)
spl-4.6.2250.0(129192) mng
touch c1 v66
nothingsfactory said:
hey guys, can i install RSPL/HSPL?
my info:
PD67### SS-BC (4K)
spl-4.6.2250.0(129192) mng
touch c1 v66
Click to expand...
Click to collapse
nope, 4.6 = half brick
What about this...
HTC Surround
PD26100 SS-BC (4K)
SPL-4.5.2250.0(129685) MNG
MicroP (LED) 0x09
Touch C1 (v69)
the-wrangler said:
nope, 4.6 = half brick
Click to expand...
Click to collapse
4.6 is not half bricked.
You have to downgrade before you can install RSPL/HPSL
All you have to do is to flash a stock ROM according with your device and then the road it's clear...
Hello everybody,
Last week I bought a HTC HD7 via ebay. After unboxing it I connected it to my laptop and installed Zune. Zune said that an update is available, so I downloaded and installed it (now I have no recovery point).
As I am very interested in developing and want to have the possibility to modify the device as I want, I wanted to unlock it.
Because I am not already 18 years old, I can't buy a token for ChevronWP7 to unlock it. Normally, students can get free unlocking through DreamSparks, but I live in Germany and neither have an ISIC card nor a .edu-E-Mail-Adress.
So I have to downgrade my HD7 (Ver. 7.10.7740; SPL 5.10.2250.0) to unlock it with the free version of ChevronWP7 for older WP7 versions.
I tried all known methods to downgrade but it didn't work for me.
I can't flash another ROM, the utility says 'Flash Write Error' and I can't restore it, because I haven't made a backup before updating.
The DFT-Tool doesn't work with SPL 5.xx.
Now, I can't downgrade my WP7-Version and my bootloader version.
Is there any possibility for me to unlock my HD7?
Here are some extra informations about my HD7:
Model: HTC HD7 T9292
OS version: 7.10.7740.16
Firmware revision number: 2250.21.51002.207
Hardware revision number: 0002
Radio software version: 5.71.09.02a_22.51.50.21U
Radio hardware version: A.102.0.D4
Bootloader version: 5.10.2250.0(131983)
As I am a german student, I have to excuse me for my bad english
check this out http://forum.xda-developers.com/showthread.php?t=1196183
Hi,
is there any solution for a halfbrick (no usb connection in tricolor bootloaderscreen), beside goldcard, yet?
Someone mentioned, that you can "restore" bootloader by using the oem cabs from your phone manufacturer. I tried that (with the mango update for htc and the newest ones via cab sender). They were installed but nothing has changed.
Current phone is HTC Trophy
OS: 7.10.8107.79
Firmware: 2250.21.51201.707
HW: 0003
Radio: 5.69.09.05a_22.50.50.21U
Bootloader: 5.12.2250.1(134400)
I have successfully unlocked, rooted, and S-OFF the 2 sensations in my signature so I am not a complete noob. I just bought a brand new black One S and have been reading through some of the tutorials, but keep getting conflicting info (what works and what doesn't with HBOOT 2.15, phones already on JB, etc.). Can anybody point me to the correct tutorial I should be looking at with my specific set up... and maybe suggest a daily driver ROM? Thanks
Here is what I have currently:
from bootloader:
Code:
*** [B]LOCKED[/B] ***
VLE PVT SHIP [B]S-ON[/B] RL
HBOOT-[B]2.15[/B].0000
RADIO-1.13.50.05.31
OpenDSP-v31.1.0.45.0815
eMMC-boot
Dec 14 2012,17:10:57:-1
from system info:
Code:
Android Version [B]4.1.1[/B]
HTC Sense Version 4+
Software Number [B]3.14.531.17[/B] 710RD
HTC SDK API level 4.63
HTC Extension version HTCExtension_Sense45_2
Kernel version 3.4.10-g0f5103e [email protected] #1 SMP PREEMPT
Baseband version 1.13.50.05.31_10.30.50.08L
Build number 3.14.531.17 CL160314 release-keys
Browser version WebKit/534.30
from CID getter:
Code:
CID: [B]T-MOB010[/B]
ro.build.id: JRO03C
ro.build.project: Ville_U_JB_45_S:320836
from CPU-Z:
Code:
Qualcomm Snapdragon [B]S4[/B] 1.51 GHz
Here is what I would like the ROM to be able to do:
100% working t-mobile wifi calling
as good, or better signal than current
I don't mind the current stock ROM except for all of the T-mobile bloatware. The last ROM I used was a version of CM10 (same as listed in signature for the sensations)