{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
USB OTG Support for XL
I was successfully able to test USB On the Go support for Xperia L.
• Actually Xperia L has inbuilt support for USB OTG but doesn't provide enough power to run it so here's the Guide
Disclaimer :
Code:
Please Note : You are solely responsible for what you do to your phone. I nor XDA are responsible for damage you may cause to your device if you mess up something
Compatible accessories :
• Thumb Drives
• USB Keyboards
• USB Mouse
• Incompatible :
• HDD's Materials/Accessories Needed :
• USB OTG Cable. :good:
• Xperia L off course
• USB HUB
Like this :
• Power Source in this case HCL ME U1 Charger.
• Full Root for running root application : USB OTG Helper
Steps : :
• Root your Xperia L (Full Root)
• Download the application stated above.
• Connect your USB hub to power source like the image shown below.
• Connect it to USB OTG cable to your Phone
• Plug in USB Thumb drive
• Now Run USB OTG Helper App then press mount.
=> Whoooaaa USB OTG is now working. :fingers-crossed:
Video :
=> Video Link
Credits :
Me(Navneet Suresh) , I BALL Website for USB Hub Image.[/B]
Whould this work if I have USB-USB cable for powering it ? Like one end is going to phone charger and another one to usb hub ?
hmmm
damian01211 said:
Whould this work if I have USB-USB cable for powering it ? Like one end is going to phone charger and another one to usb hub ?
Click to expand...
Click to collapse
It might work after all our final motto is to power our USB Hub/Pendrive Test it and update your results here :good:
Maybe we didn't need usb hub to power anymore if kernel dev manage to undervolt cpu/gpu voltage then make the voltage to supplying in micro usb port. I think it will work, but it's just my idea, because cpu/gpu can be undervolt so why not give the rest volt to usb port to make otg works. Btw, it's just my idea, and actually idk how much voltage needed for otg..
Btw thank you very much for the OP to make the OTG Guide. Will update the index threads soon if I'm on my pc.
Sent from my C2105 using xda app-developers app
karkand said:
Maybe we didn't need usb hub to power anymore if kernel dev manage to undervolt cpu/gpu voltage then make the voltage to supplying in micro usb port. I think it will work, but it's just my idea, because cpu/gpu can be undervolt so why not give the rest volt to usb port to make otg works. Btw, it's just my idea, and actually idk how much voltage needed for otg..
Btw thank you very much for the OP to make the OTG Guide. Will update the index threads soon if I'm on my pc.
Sent from my C2105 using xda app-developers app
Click to expand...
Click to collapse
You are right if we could under volt and supply the reqd voltage to the pen drive then we don't need these methods to run but for the time being this method works flawlessly. Welcome :highfive:
Navneet Suresh said:
You are right if we could under volt and supply the reqd voltage to the pen drive then we don't need these methods to run but for the time being this method works flawlessly. Welcome :highfive:
Click to expand...
Click to collapse
Guys wat are the pre requirements for using otg cable in terms of firmware?
I'm having a otg cable with one end micro usb pin and another end with usb port....how can I enable it with otg helper?
And otg helper app says no drives found wen I plug in a pendrive...help needed.
I'm having 4.2.2 updated with rooted and locked bootloader Xl c2104
Sent from my C2104 using Tapatalk 2
requirements
drganbds said:
Guys wat are the pre requirements for using otg cable in terms of firmware?
I'm having a otg cable with one end micro usb pin and another end with usb port....how can I enable it with otg helper?
And otg helper app says no drives found wen I plug in a pendrive...help needed.
I'm having 4.2.2 updated with rooted and locked bootloader Xl c2104
Sent from my C2104 using Tapatalk 2
Click to expand...
Click to collapse
The requirements are stated in OP as i have informed u have to externally power it
xperia l usb otg
Navneet Suresh said:
You are right if we could under volt and supply the reqd voltage to the pen drive then we don't need these methods to run but for the time being this method works flawlessly. Welcome :highfive:
Click to expand...
Click to collapse
is there any such rom available, if yes plz tell me where can i get it, if no then tell me is there any hope for such roms in the future,.......thanks for replying..... :good::good::good:
Nope roms and kernel both have to be tweaked so currently no kernel support usb host mode with power you w'll have to wait till dev find a break through
Sent from Sony Xperia L
Thanks for replying.....
Navneet Suresh said:
Nope roms and kernel both have to be tweaked so currently no kernel supporst usb host mode with power you wll have to wait till dev find a break through
Sent from Sony Xperia L
Click to expand...
Click to collapse
Thanks for responding............... lets just hope devs take this issue into consideration, and wait for a fix ........:fingers-crossed::fingers-crossed::fingers-crossed:
where to get that HCL ME U1 Charger or similar thing like that ? any online retail store link ? i'm stuck with that charger.
or any other way to power the usb hub ?
@JOYGR u can use a power bank instead to make it more portable
Sent from my C2104 using xda app-developers app
Navneet Suresh said:
@JOYGR u can use a power bank instead to make it more portable
Sent from my C2104 using xda app-developers app
Click to expand...
Click to collapse
nice guide
i saw some geeks/nerds peel usb otg cable and solder power wires to their phones battery
it's silly but they doing it and believe that this the only way
but your guide is stylish and smart
@yamin8000 actually i too saw many guides on OTG but after seeing them I formulated my idea in them by just supplying correct voltage externally thats all and thank you
Sent from my C2104 using xda app-developers app
Hi guys!
Need help..I have Xperia L (C2105) running android 4.2.2 (build number 15.3.A.1.14). Phone is rooted (locked bootloader) with this tutorial and all apps for rooted users works fine. Also, I have powered usb hub and usb otg cable but when I try to mount usb stick with "USB OTG Helper" it keep saying "No Drives found".
Any idea? Please help..I am desperate
Thanks..
p.s. Usb mouse and keyboard don't work either.
solved
k00len said:
Hi guys!
Need help..I have Xperia L (C2105) running android 4.2.2 (build number 15.3.A.1.14). Phone is rooted (locked bootloader) with this tutorial and all apps for rooted users works fine. Also, I have powered usb hub and usb otg cable but when I try to mount usb stick with "USB OTG Helper" it keep saying "No Drives found".
Any idea? Please help..I am desperate
Thanks..
p.s. Usb mouse and keyboard don't work either.
Click to expand...
Click to collapse
http://forum.xperia.cz/viewtopic.php?f=78&t=7797 is solved use translator Google :laugh:
Android is a Linux system that are not Windows
From what you wrote so you have to find the disk according to the way the sdcard0 is there search!!
Never mind what it says it is there and wrote me "No Drives found".
To resume, its impossible to run any device without the Hub?
Even simple pendrives?
ChinchilaO said:
To resume, its impossible to run any device without the Hub?
Even simple pendrives?
Click to expand...
Click to collapse
Ya it wont run untill it gets power externally i looked into kernel codes and logs the phone cant power otg its hardware limitation it seems
Sent from my C2104 using xda app-developers app
you said about Power bank
Will it work? (power bank = portable battery?)
Thank you!
ChinchilaO said:
you said about Power bank
Will it work? (power bank = portable battery?)
Thank you!
Click to expand...
Click to collapse
Yes i know power bank = portable battery bank it will work but it should have those connectors
Sent from my C2104 using xda app-developers app
Related
Hi,
I have two Infuse 4g that I would like to root and unlock.
The problem is that nothing works for them.
I tried the SuperOneClick.... NOTHING
I tried the Kies to install drivers.... NOTHING
Kies does not find the devices... (((
I tried downloading the drivers form samsung but NOTHING worked
....
....
.... NOTHING worked
here are the guides that i tried and NOTHING worked
http://forum.xda-developers.com/showthread.php?t=803682
http://forum.xda-developers.com/showthread.php?t=1176886
http://forum.xda-developers.com/showthread.php?t=1081072
and more, I do not remember the links....
Here is the info for the phones:
1.
model number: SAMSUNG-SGH-I997
Firmware: 2.2.1
Baseband: I997UCKE3
Kernel: 2.6.32.9
Build number: FROYO.UCKE3
2.
model number SAMSUNG-SGH-I997
Firmware: 2.2.1
Baseband: I997UCKH1
Kernel: 2.6.32.9
Build number: FROYO.UCKH1
PLEASE HELP!
Just curious, but have you enabled USB debugging?: Settings > Applications > Development > USB debugging
idk..did u try settings/applications/development/USB debugging - box checked?
try different usb port?
try different usb cable?
Lies wont find infuse never has....just plug it in with USB debugging checked and it will automatically install the drivers....and superoneclick will work if USB debugging is checked.....
Sent from my SAMSUNG-SGH-I997 using xda premium
jscott30 said:
Just curious, but have you enabled USB debugging?: Settings > Applications > Development > USB debugging
Click to expand...
Click to collapse
yes the "USB debugging" and the "Allow mock locations".
qkster said:
idk..did u try settings/applications/development/USB debugging - box checked?
try different usb port?
try different usb cable?
Click to expand...
Click to collapse
yes the "USB debugging" and the "Allow mock locations"
the usb port and cable work because i can see the phone memory and the SD card.
dman3285 said:
Lies wont find infuse never has....just plug it in with USB debugging checked and it will automatically install the drivers....and superoneclick will work if USB debugging is checked.....
Sent from my SAMSUNG-SGH-I997 using xda premium
Click to expand...
Click to collapse
I wish it was so simple but for some, I am sure stupid, reason does not work for me...
qkster said:
idk..did u try settings/applications/development/USB debugging - box checked?
try different usb port?
try different usb cable?
Click to expand...
Click to collapse
LOL I just tried a different cable and it worked....
I cannot believe it was the cable...
Well now I will know what to do if something is not working the way it should, before I spend all night trying to figure it out and banging my head against the keyboard, and try different cables.
radi_v said:
LOL I just tried a different cable and it worked....
I cannot believe it was the cable...
Well now I will know what to do if something is not working the way it should, before I spend all night trying to figure it out and banging my head against the keyboard, and try different cables.
Click to expand...
Click to collapse
you're welcome
I don't know if you have figured it out yet but you should be able to install the drivers through kies. Superone click and away you go.
Just trying to help. Then you have to download 3e recovery and extract. Put the recovery file in your root sd card. Find it and reboot into recovery and reinstall packages. If that doesn't work use ROM manager to flash cwm.
Sent from my DROID X2 using XDA App
You may have your settings on your PC where it hides file extensions. Just a suggestion.
Sent from my DROID X2 using XDA App
I had the same problem. first with copying files. then the copying of music. cable only work for 2 months.
Nokia cable the best!!!
Since when does kids rcogognize infuse? News to me ...I uninstalled it because it would never find or recognize my phone...and when it did it said it wasn't supported..... more pain than not....the drivers for infuse shroud install automatically if you check usb debugging and plug it in...if not there's a problem in the phone....
Sent from my SGH-I997 using xda premium
dman, kies recognized my Infuse. Maybe it depends on the Rom that we're running.
It ain't right. I figured that I would use Kies and take a pic. But now I can't get a connection.
Cranky...
MitRa
dman3285 said:
Since when does kids rcogognize infuse? News to me ...I uninstalled it because it would never find or recognize my phone...and when it did it said it wasn't supported..... more pain than not....the drivers for infuse shroud install automatically if you check usb debugging and plug it in...if not there's a problem in the phone....
Sent from my SGH-I997 using xda premium
Click to expand...
Click to collapse
Kies has recognized my Infuse since day one. The problem is you can use any of the functions of the Kies software.
Something to note however is that it only works on one of my PCs. I have a Dell Studio XPS 9000 desktop that Kies will not work on... I have a feeling that it is something to do with the USB drivers . I also have a Dell Studio Laptop that Kies works great on. I have not looked in to why ... just happy to have one working LOL.
Sent from my SAMSUNG-SGH-I997 using XDA App
Ok???
Sent from my SGH-I997 using xda premium
omnimanx1 said:
Kies has recognized my Infuse since day one. The problem is you can use any of the functions of the Kies software.
Something to note however is that it only works on one of my PCs. I have a Dell Studio XPS 9000 desktop that Kies will not work on... I have a feeling that it is something to do with the USB drivers . I also have a Dell Studio Laptop that Kies works great on. I have not looked in to why ... just happy to have one working LOL.
Sent from my SAMSUNG-SGH-I997 using XDA App
Click to expand...
Click to collapse
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sorry.. couldn't resist... Glad to hear that something works for you.. never worked for me!
Anyone ever use one of these, I am seriously considering for a skype device.
Please feedback would be great.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://www.pyramidistribution.com/MagicPro-iGoGo-TV-Android-TVBox-Builtin/M/B006RIU8QA.htm
Looks very cool, no play store support but definitely cool...
Tell me what you think, about to drop the dimes on this.
Play store now supported with firmware update.
Ok I bought this thing and it came today. Freaking awesome so far. No play store, but amazon app store is sufficient.
Using my 55 inch LCD, hdmi cable supplied, WiFi, go launcher.
Sent from my HTC Mecha using Tapatalk 2
New Firmware for Google Play Store
They have released new firmware to support Google play store?
androwS said:
They have released new firmware to support Google play store?
Click to expand...
Click to collapse
Sweet Gonna have to check that out when I get home.
Sent from my HTC Mecha using Tapatalk 2
Anyone else using this and have a dreadfully slow internet connection
Sent from my HTC Mecha using Tapatalk 2
Magic pro - Skype
Could you please share your experience using skype. how is quality of camera and does mic pick up sound from approx 10ft ?
How are other apps look on TV since the UI is not designed for TV but phone ?
regards,
TM
tarakmehta said:
Could you please share your experience using skype. how is quality of camera and does mic pick up sound from approx 10ft ?
How are other apps look on TV since the UI is not designed for TV but phone ?
regards,
TM
Click to expand...
Click to collapse
The use of the device is a little quirky at first. Getting use to the air mouse takes a little bit, but not bad. Skype works good, I did have to get a new hdmi cable since the supplied cable took a **** only hours after first use. I did switch the launcher to use go launcher. The stock launcher is very generic adw. I use this on my 55 LCD, not a good plan If you wanted a netflix machine. The android app streams at a super low resolution, and when shown on a big screen it sucks.
Some live wallpapers don't work, and apps made with low resolution graphics suck.
All in all, for skype it is great, the reason I bought it. Gaming is ok, the air mouse is a cool feature after learning to use it. Now that the play store works, I'm a happy guy.
The memory storage is goofy however. There is 8gb of storage, but only 500mb for apps on the data partition. The rest is nan storage which I think works similar to an SD card. You can transfer your installed apps to it, but by default they install to thelower storage first.
I am not sure if I'd recommend it yet, but it is a cool thing for a Skype device. It seems to be a beta product yet though.
Sent from my HTC Mecha using Tapatalk 2
Magic-Pro iGoGo TV how to update
how to update Magic-Pro iGoGo TV can someone plz help me
zubair151 said:
how to update Magic-Pro iGoGo TV can someone plz help me
Click to expand...
Click to collapse
You have to use the service center app or from the website and download the firmware image.
Read the manual for instructions.
Sent from my HTC Mecha using Tapatalk 2
Please help with rooting this device.
I tried z4root and gingerbreak 1.2 but failed
gingerbreak reboot it without instaling superuser or rooting
My problem is arabic letter, cannot get them connected epeialy for search on youtube.
Is there any app dose that without rooting?/??
new firmware complete... kernel, system, misc, parameter, boot...
Hello,
I have new firmware of igogo TV. He is rootable with gingerbreak but i test several method for installing cwm or twrp but nothing. I have a cwm OK but there are no phisic touch on igogotv for use it.
The archive contains driver, tool for flashing, DOC and burn files (boot, kernel,parameter, misc, recovery, loader ans system).
The launcher is optimised for tv and he is smoother than the old.
Tell me if y ou want.
____Sorry for my english.____
sosordinet said:
Hello,
I have new firmware of igogo TV. He is rootable with gingerbreak but i test several method for installing cwm or twrp but nothing. I have a cwm OK but there are no phisic touch on igogotv for use it.
The archive contains driver, tool for flashing, DOC and burn files (boot, kernel,parameter, misc, recovery, loader ans system).
The launcher is optimised for tv and he is smoother than the old.
Tell me if y ou want.
____Sorry for my english.____
Click to expand...
Click to collapse
hello sosordinet, thanks for sharing the firmware, but didnt figure out the way to connect it to the computer. Would be great if you share how connected it using which cable and where we can get it. Also, is the firmware you have is downloaded from service centre app or from somewhere else ? Do you think Igogotv MP188 model works with the firmware you have ? Thanks
vbrsekhar said:
hello sosordinet, thanks for sharing the firmware, but didnt figure out the way to connect it to the computer. Would be great if you share how connected it using which cable and where we can get it. Also, is the firmware you have is downloaded from service centre app or from somewhere else ? Do you think Igogotv MP188 model works with the firmware you have ? Thanks
Click to expand...
Click to collapse
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
link ?
Hello,
i'am interested for an update. Can you send me the link to my PM?
Thanks for your help.
dr0212
sosordinet said:
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
Click to expand...
Click to collapse
MP sent
please send me the link also
Can you send the link to me ?? thanks.
kindly send me the link to [email protected] Thanks a lot.
iGoGoTV MP-188 firmware
sosordinet said:
Hello,
This is the link of firmware on dropbox:
I have not enough post for paste a link. Tell me how i do this
I receive it directly from support of magic-pro he is not on service center at this day yet...
All the information and soft "how to flash" are in the archive.
For flashing and connect the igogo tv i have used otg usb port.
For the cable, i use 2 old usb cable, cut and solder the wire green/green, blue/blue.... works fine on mp188 with cam model.
....I hope anyone modify the kernel for overclocking.....
I rooted with gingerbreak apk and install busybox from google play. All works fine.
Enjoy with new igogo tv
Click to expand...
Click to collapse
Kindly send me the link of iGoGoTV MP-188 firmware to [email protected] Thanks for your help!
Hello guys,
unfortunately my IGoGo MP188 stopped working due to my unfortunate firmware upgrade. I did something wrong and now it freezes when loading. Can anyone help me with restoring?
And please send me the firmware and step by step instructions to [email protected]. I appreciate it. And is it possible to upload firmware to device through micro SD card?
This pack contains some modified Stock Kernels (all with USB Tethering enabled), Custom recoveries and Tethering and Portable Hotspot Unlockers... All contents listed below
Contents:
Code:
[LIST]
[*]Kernels:
[LIST=1]
[*]4.3 Stock Kernel with USB Tethering
[*]4.3 Stock Kernel with USB Tethering and Kexec Hardboot
[*]4.4 Stock Kernel with USB Tethering
[*]4.4 Stock Kernel with USB Tethering and Kexec Hardboot
[/LIST]
[*]Recoveries:
[LIST=1]
[*]ClockworkMod Touch Recovery
[*]ClockworkMod Regular Recovery
[*]TWRP Open Recovery
[*]TWRP MultiROM Recovery
[/LIST]
[*]Unlockers:
[LIST=1]
[*]Tethering and Portable Hotspot Unlocker for Android 4.3
[*]Tethering and Portable Hotspot Unlocker for Android 4.4
[/LIST]
[/LIST]
Download:
Code:
[B]Ad Suported Links (Helps me since I can't take donations in my country):[/B]
http://bit.ly/1aYs48K (https://adf dot ly/ZpWno) (ignore warnings and click continue, its perfectly safe)
http://bit.ly/17ZwoEF (http://cf2.me/2b21)
[B]Direct Download:[/B]
http://d-h.st/zwE
Instructions:
After Download extract the n7 folder from the ZIP. I that folder you'll find a file named menu.bat. Run it. Now make what ever choices you want to make but before that make sure your Bootloader is unlocked and USB Debugging is Enabled and working.
After you've unlocked USB Tethering and Installed a tethering enabled kernel you can go and enable USB Tethering after Plugging your Tablet in to your pc from Settings>More...>Tethering & Portable Hotspot>USB Tethering.
If you're a windows user and have done this for the first time you have to perform some steps before you can actually use the USB Tethering.
All these steps have to be performed keeping USB Tethering enabled.
1. Open up the device manger on your pc.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
2. Find Nexus 7 under Other Devices
3. Riight click it and select Update Driver Software
4. Select Browse my computer for driver software
5. Select Let me pick from a list of device drivers on my computer
6. Scroll down, find and select Network Adapters and Click Next
7. In the manufacturer Pane Scroll to Find Microsoft and Select it.
8. In the Network Adapter Pane Scroll to Find Remote NDIS Based Internet Sharing Device and Select it. Then click next.
9. A compatibilty warning may appear, just click yes. Now you're done and good to go
Credits:
@tassadar for Kexec Hardboot Patches and MultiROM Recovery
Koushik Dutta for ClockworkMod Recovery
Google for the Awesome OS
Asus for the Device
psghari said:
I have tried to install this in my Nexus 7 Tilapia, but when i flash it in twrp it fails without providing additional details, any help is much appreciated.
Nexus 7 3G 2012
KitKat 4.4 KRT16S
Click to expand...
Click to collapse
are you capable of reading the instructions? this is not for flashing...... this is meant to be used on a windows computer with ypur device connected pver USB
Sent from my Nexus 7 using xda app-developers app
psghari said:
I realized that after i posted the comment.. thanks for confirming again and for the mod :good:
---------- Post added at 10:14 PM ---------- Previous post was at 09:28 PM ----------
I have flashed the kernel correctly , selected the 4th option and it didnt work as intended for me. I have done everything correctly including the RNDIS drivers but the tether didn't initiate.I have taken the logcat when i got the error, for now returning to Oxydo kernel,
Code:
[ 11-25 03:36:33.584 521: 1473 E/UsbDebuggingManager ]
Communication error:
java.io.IOException: No such file or directory
at android.net.LocalSocketImpl.connectLocal(Native Method)
at android.net.LocalSocketImpl.connect(LocalSocketImpl.java:287)
at android.net.LocalSocket.connect(LocalSocket.java:130)
at com.android.server.usb.UsbDebuggingManager.listenToSocket(UsbDebuggingManager.java:75)
at com.android.server.usb.UsbDebuggingManager.run(UsbDebuggingManager.java:111)
at java.lang.Thread.run(Thread.java:841)
Click to expand...
Click to collapse
Works perfectly for me....... have u unlocked the tethering options? If u have does it show tethered when u tap USB Tethering?
Sent from my Galaxy Nexus using xda app-developers app
psghari said:
I did enable the Tethering and above is the screenshot when I select "Tether". It stays like that for sometime and then changes back to the default MTP mode I guess. I am running stock 4.4 KRT16S. Is there any other information that you need ? I badly need this to work...
thanks for helping me out and appreciate your efforts :fingers-crossed:
Click to expand...
Click to collapse
did u try the third option, the one without kexec hardboot?
Sent from my Nexus 7 using xda app-developers app
u know the 4.3 kexec hardboot kernel works with 4.4 u could try that.
Sent from my Nexus 7 using xda app-developers app
psghari said:
Tried now, still the same issue
Click to expand...
Click to collapse
flawless for me... as u can see
Sent from my Nexus 7 using xda app-developers app
psghari said:
Is that using a 4.4 kernel or ? .. Mind sharing the current config ?
Sent from my Nexus 7 using Tapatalk 4
Click to expand...
Click to collapse
Yes that's 4.4 with kexec and usb tethering.... no special config..... works straight away.....
Sent from my Galaxy Nexus using xda app-developers app
how is battery drain for this Kernel ?
I am looking for ROM and Kernel with minimal battery drain during sleep (not power off)
my current Tilapia, 4.4 stock ROM and Kernel is suffering from > 5% / Hr battery drain during sleep in airplane mode
dicxz80 said:
how is battery drain for this Kernel ?
I am looking for ROM and Kernel with minimal battery drain during sleep (not power off)
my current Tilapia, 4.4 stock ROM and Kernel is suffering from > 5% / Hr battery drain during sleep in airplane mode
Click to expand...
Click to collapse
These are modified stock kernels so its same as the stock kernel.
Sent from my Galaxy Nexus using xda app-developers app
Does this kernel allow me to enable fast charge? Upgrading to 4.4 was hardly worth it since it no longer works...
ryar said:
Does this kernel allow me to enable fast charge? Upgrading to 4.4 was hardly worth it since it no longer works...
Click to expand...
Click to collapse
I don't think so
Sent from my Galaxy Nexus using xda app-developers app
all kernels in this pack and a few more updated kernels have been put on silvernexus.co.nr
downloaded kernels maybe flashed via fastboot or using something like flashify.
Hi all,
Which kernel or kernels support USB otg for Nexus 5 kitkat 4.4.2?
Franco do quite well.
I use this kernel and has no mention of USB OTG support that i seen.however i use a Sony 16g micro USB Flash drive with Stickmount ,Root explorer and works really well
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Sent from my Nexus 5 using Tapatalk
jball said:
I use this kernel and has no mention of USB OTG support that i seen.however i use a Sony 16g micro USB Flash drive with Stickmount ,Root explorer and works really well
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Franco doesnt mention featured on his thread, but i use franco and it supports otg very well.
Sent from my Nexus 5 using Tapatalk
Seadra said:
Franco doesnt mention featured on his thread, but i use franco and it supports otg very well.
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Franco kernel is the best
Sent from my Nexus 5 using Tapatalk
I know that CM supports USB OTG by default without the need to flash another kernel or use stickmount app. And also it charges the phone when I connect my usb 3.0 HDD with additional power to the USB. But why can't other ROM developers implement this option?
Sent from my Nexus 5 using XDA Premium 4 mobile app
jball said:
Not ever trying to talk bad but the reported bricks involved with the use of Franco kernel is enough for me to stick with what i use .glad it works for you
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Using franco from last 3 months and i haven't seen a post with bricks.. But having a nexus and bricking it? ... Never had problems with franco and i think it's the most used kernel here at XDA..
Sent from my Nexus 5 using Tapatalk
This is all i plug in with no power source and no extra cable/wires.
Stickmount pro
Root explorer pro
Pro versions just foe the extras and supporting the devs
Under the white cap is the micro USB
Sent from my Nexus 5 using Tapatalk
ElementalX Kernel for nexus 5 fully support usb otg
Sent from my Nexus 5 using Tapatalk
Seadra said:
Franco do quite well.
Click to expand...
Click to collapse
masterkai said:
ElementalX Kernel for nexus 5 fully support usb otg
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I connect a 8gb usb storage with otg cable to the phone but nothing happened even in storage show nothing, should I do something?
amirsh77 said:
I connect a 8gb usb storage with otg cable to the phone but nothing happened even in storage show nothing, should I do something?
Click to expand...
Click to collapse
use stickmount from play store
Sent from my Nexus 5 using Tapatalk
masterkai said:
use stickmount from play store
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
Thanks I didi it but each time when it wants to mount the app stop and popup say " Unfortunately, stickmount has stopped." I tried different versions but all the same, is there any program else ?
amirsh77 said:
Thanks I didi it but each time when it wants to mount the app stop and popup say " Unfortunately, stickmount has stopped." I tried different versions but all the same, is there any program else ?
Click to expand...
Click to collapse
yes nexus media importer
Sent from my Nexus 5 using Tapatalk
jball said:
Not ever trying to talk bad but the reported bricks involved with the use of Franco kernel is enough for me to stick with what i use .glad it works for you
Sent from my Nexus 5 using Tapatalk
Click to expand...
Click to collapse
I've read the entire Franco thread for both the N5&10 and never read of anyone bricking their phone due to that kernel.
I use rooted stock with Franco r34 on both my N5&10 and OTG works well with the aforementioned stickmount and USB OTG Helper.
Sent from my Nexus 10 using XDA Premium HD app
3DSammy said:
I've read the entire Franco thread for both the N5&10 and never read of anyone bricking their phone due to that kernel.
Click to expand...
Click to collapse
That's because you can't brick with a kernel unless:
1) You flashed it wrong (disconnected power through flash or something)
2) You flashed the wrong kernel for your device and perhaps supplied too much voltage to hardware.
LIQUIDSMOOTH
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
DISCLAMER
Your warranty is now void.
I am not responsible for bricked devices, dead SD cards etc. Please do some research if you have
any concerns about features included in this ROM before flashing it! YOU are choosing to make these
modifications, not me...
Click to expand...
Click to collapse
Code:
Customizable lockscreen buttons/sliders
Chronus clock widget
Customizable hardware and software keys
Transparent navbar and status bar
Customizable navbar ring
Navigation bar widgets
Customizable power menu
Notification power widget
Customizable quicksettings panel
Statusbar mods
Theme engine
Quiet hours
Volume rocker music controls
Full Rotation
Customizable battery and notification light
And a lot more features..
DOWNLOADS AND OTHER LINKS
LS-KK-v3.2-2014-07-31-viva.zip - 170.61 MB
[URL=http://d-h.st/O2n]LS-KK-v3.2-2014-07-21-viva.zip - 170.97 MB[/URL]
LS-KK-v3.1-2014-07-15-viva.zip
LS-KK-v3.1-2014-07-04-viva.zip
GAPPS for KK
INSTALLATION INSTRUCTIONS
- FULL AND COMPLETE WIPE IS A MUST (IMHO)
- Boot into recovery (Recommend TWRP 2.7.1.0)
- Take a backup
- Wipe Cache
- Wipe Dalvik
- Wipe Data/Factory Reset
- Wipe /System (or, in CWM, "format /system" under Mounts and Storage menu)
- Flash ROM
- Flash gapps
- Reboot, and wait 10 minutes before touching it at ALL
- Reboot and enjoy
Click to expand...
Click to collapse
THANKS
- liquidsmooth team
- @worstenbrood for Dodby Digital Sound
- @xyyx for the sd as primary
Kernel source : https://github.com/stap75/android_kernel_huawei_viva
Liquid source : https://github.com/LiquidSmooth
If you appreciate my work on the Huawei P1 you can support me by donating!!!
SD card is Primary.
Good job known bugs?
Inviato dal mio U9200 utilizzando Tapatalk
Everything looks very good, really liquid smooth!
I have problems with USB connecting to PC - on WIN7 keeps connecting and disconnecting "MTP device".Cannot connect neither as mass storage.Also, I have LED indication of charging on USB, but it is not shown on battery icon (not showing on AC neither). messages "usb connected" and "usb debbuging connected" keeps showing in notif.area after disconnecting USB.
Didn't tried BT, I'll try later.
Can anyone confirm USB problems, or I did something wrong?
komir said:
Everything looks very good, really liquid smooth!
I have problems with USB connecting to PC - on WIN7 keeps connecting and disconnecting "MTP device".Cannot connect neither as mass storage.Also, I have LED indication of charging on USB, but it is not shown on battery icon (not showing on AC neither). messages "usb connected" and "usb debbuging connected" keeps showing in notif.area after disconnecting USB.
Didn't tried BT, I'll try later.
Can anyone confirm USB problems, or I did something wrong?
Click to expand...
Click to collapse
Please use http://forum.xda-developers.com/showpost.php?p=52502805&postcount=407 for Bt. With USB I have no problems at all, but I use Linux (ubuntu 14.04). I haven't tried on windows yet.
* Do not try xposed framework. It is not working yet ( Roms error not mine, the Liquid Team knows about it).
New buid is up. Much more stable, a lot of fixes and latest Trebuchet from CM11.
Enjoy the best ROM for P1 !!!
On this first version i couldn't pair BT with another phone (HTC)-simply doesn't see any BT device.Didn't tried with PC.
I'm amazed with number of customizations,especially in performance settings!Great job!
Sent from my U9200 using XDA Free mobile app
komir said:
On this first version i couldn't pair BT with another phone (HTC)-simply doesn't see any BT device.Didn't tried with PC.
I'm amazed with number of customizations,especially in performance settings!Great job!
Sent from my U9200 using XDA Free mobile app
Click to expand...
Click to collapse
Bt is fixed and this build is much more stable.
Can I flash the update whitout doing wipes?
Inviato dal mio U9200 utilizzando Tapatalk
Installed new version - BT still not working, can't detect neither mobile device or PC (Win7).
Initially had same problem with USB, but discovered that when you turn off USB debbuging, it connects ok as usb mass storage.Everything else seems ok.
Spanorg, can you put back battery charging indication on battery icon on some next release?
Can't open Google play store in new build... Why?
Sent from my U9200 using Tapatalk
asdlalla99 said:
Can't open Google play store in new build... Why?
Sent from my U9200 using Tapatalk
Click to expand...
Click to collapse
I don't have that problem.Did u installed GAPPS for KK?
komir said:
Installed new version - BT still not working, can't detect neither mobile device or PC (Win7).
Initially had same problem with USB, but discovered that when you turn off USB debbuging, it connects ok as usb mass storage.Everything else seems ok.
Spanorg, can you put back battery charging indication on battery icon on some next release?
Click to expand...
Click to collapse
Try this and tell me please...
komir said:
I don't have that problem.Did u installed GAPPS for KK?
Click to expand...
Click to collapse
Yes... KK gapps in 1st post...
Inviato dal mio U9200 utilizzando Tapatalk
spanorg said:
Try this and tell me please...
Click to expand...
Click to collapse
This patch got BT alive!I managed to pair with PC and with HTC!
Great job,man,thanks!:good:
---------- Post added at 04:20 PM ---------- Previous post was at 04:16 PM ----------
asdlalla99 said:
Yes... KK gapps in 1st post...
Inviato dal mio U9200 utilizzando Tapatalk
Click to expand...
Click to collapse
I installed pa_gapps-modular-micro-4.4.2-20140213-signed.zip, they're little old but works on all KK ROM...don't have link,try to google them...
Ok now is workink ^^ thanks
Sorry 4 my bad english!
komir said:
This patch got BT alive!I managed to pair with PC and with HTC!
Great job,man,thanks!:good:
Click to expand...
Click to collapse
Do you try to make a call with Bluetooth Handsfree?
Looking forward to giving this a test run. Xposed fixed with new build or still awaiting for the Liquid Team to fix?
Kind regards
Sent from my U9200 using Tapatalk
bmasgone said:
Do you try to make a call with Bluetooth Handsfree?
Click to expand...
Click to collapse
no, don't have BT handsfree
---------- Post added at 10:48 AM ---------- Previous post was at 10:01 AM ----------
QUOTE=or1n]hello komir,
i installed the liquidsmooth p1 rom and found some minor bugs
the halo window causes the systemui to fc when trying to move it and theres a mini-window underneath it
also the sound with headphones is too low , i tried to config the audio .conf files but it didnt help
also theres no switch to turn off halo =)
if you happen to find a solution to the low volume thing , please advise me.
can u just post this into the thread , cause i cant post it as i'm anew member and need at least 10 posts =)
thankies [/QUOTE
Sorry man,I don't use Halo,but as i remember from JB,it can be removed by fast double tap on circle,when another red circle appears,and just drag halo circle to it...didn't tried this.Did u tried Ninja mode in Halo settings?
I use headphones very rarely,don't listen the music etc -Spanorg,can u help about this?
Sent from my U9200 using XDA Free mobile app
Hey. Runs as every other rom.
But one bug (Thats on all kitkat roms) The Screen Off Animation is broken. After Turn off phone it pops a sec again.
Can'T find an option for disable turn off animation
Sometimes phone hangs up. (Full Wipe , Apps are all manually reinstall) Battery consumption seems a bit high..
I use zipaglin apps ? and clear cache after boot? Can this it bee ?
@spanorg. Can you please fix the camera bug on cm10.2 ? This was the fastes an stables rom and battery consumption was so good. But the camera bug ist totally anoying