help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
Turn off signature verification in CWM.
I dont use CWM personally but I would say check under Advanced or Settings if it has that option while you are booted into CWM.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
how to do that?
Klown80 said:
Turn off signature verification in CWM.
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
How to do that?
any way how to install cwm without root
any way how to install cwm without root
mhmd963 said:
any way how to install cwm without root
Click to expand...
Click to collapse
Flash CWM via odin
Sent from my GT-P6200 using XDA Premium HD app
Use Framaroot
http://forum.xda-developers.com/showthread.php?t=2130276
mhmd963 said:
help pls problem with root on p6200
when i was root by this way i have issue
1) Install USB driver for Samsung Galaxy Tab 7.0 Plus to transfer files between the Android device and computer.
2) Enable USB Debugging Mode on the tablet to connect the Android device with the computer and use the Android SDK with it. [Press Menu>> Settings>> Applications. From there navigate and click on Development option and ensure the USB Debugging Mode is turned on.]
3) As the tutorial might wipe all data of the phone, create a backup. If the device is having any custom recoveries such as CWM/TWRP already installed then backup data using the recovery.
4) The device should have above 80 per cent of battery charge.
5) The Galaxy tablet should be factory unlocked and not locked to a particular carrier.
6) The tablet will lose manufacturer's warranty once it is rooted. However, users can reclaim the warranty back by unrooting the device later.
7) The recovery file and the Superuser file work only on the Samsung Galaxy Tab 7.0 Plus P6200. Applying these on any incorrect variant might brick the device. Therefore, verify the model number of the Galaxy device by selecting Settings>> About device>> Model number.
Steps to root Samsung Galaxy Tab 7.0 Plus GT-P6200 on Android 4.1.2 Jelly Bean and Install CWM Recovery
Step-1: Download CWM recovery file for Samsung Galaxy Tab 7.0 Plus to the computer
File name: GT-P6200-Recovery-tar.md5
Step-2: Download CWM flashable SuperUser zip. Copy it to the SD card of the tablet
File name: Superuser-3.1.3-arm-signed.zip
Step-3: Download Odin 3.07 and extract the downloaded zip to the computer
Step-4: Switch off the Galaxy tablet and boot it into Download Mode by pressing and holding Volume Down and Power buttons together
Step-5: Launch Odin on the computer
Step-6: Connect the Galaxy Tab 7.0 Plus to the computer using USB cable while it is in the Download Mode. Wait until Odin detects the tablet. When the tablet is connected successfully, the ID: COM will turn yellow with COM port number. Also, an Added message will appear in Odin indicating successful connection
Note: If the Added message does not come then try another USB port, try the one located at the back side of the computer. If that too does not work then re-install USB driver.
Step-7: In Odin, click the PDA button and select GT-P6200-recovery.tar.md5 file
Step-8: Verify the Auto Reboot and F.Reset Time checkboxes are selected in Odin. But uncheck the Re-Partition option
Step-9: Finally click the Start button in Odin to begin the installation process which would take few minutes to complete. Once the installation process is completed, a PASS message will appear under Odin indicating successful installation. The tablet will then reboot automatically
Step-10: Once the tablet boots up, turn it off. Then boot the device into recovery mode by pressing and holding Volume Up and Power buttons together
Note: In recovery mode, use the Volume keys to scroll between options and use Power button to select the desired option.
Step-11: In recovery mode, scroll down to and select install zip from sdcard then select choose zip from sdcard. Now navigate to the Superuser-3.1.3-arm-signed.zip file which was earlier copied to the SD card of the tablet
Step-12: Select it using the Power button and confirm installation by selecting Yes on the next screen
Step-13: Once the installation process is completed, return to the main recovery menu and reboot the tablet by selecting reboot system now
Samsung Galaxy Tab 7.0 Plus should be now rooted successfully on Android 4.1.2 Jelly Bean with ClockworkMod recovery installed. To verify the root, open the app drawer of the tablet and look for an app called SuperSU from the list. Also, to ensure the root access, install Root Checker app from Google Play Store.
when select Superuser-3.1.3-arm-signed.zip says
e:failed to verify whole-file signature
e:failed to verify whole-file signature
e:signature verification failed
thats all
plz hlp me
Click to expand...
Click to collapse
I dont flash at cwm superuser 3.1.3 coz I have tested a lot and other superuser, and it didnt work on mine, what I did is either flash it at odin or by using framaroot apk, in framaroot for gt p6200 click aragorn then ok then reboot so that superuser will be installed
Sent from my GT-P6200 using xda app-developers app
hello! I bought a galaxy s duos gt-s7562 from ebay with android 4.2.2, I tried to install cwm with this method
STEPS
Step 1 :- Download ES File Explorer and Rooting kit and Extract it
Step 2 :- Install RootMaster1.0.7eng.apk and Press Root privileges to Root the Device temporary.
Step 3 :- Open ES File Explorer In Settings Under tools Enable "Root Explorer" that will give permission to re-write.
Step 4 :- In ES File Explorer in setting Under Local select " / Local " then open the folder "System" then "etc"
/Device/System/etc
Step 5 :- Search for the file "install.recovery.sh" and rename it to "install.recovery.sh.bak" This is done to avoid overwriting of stock recovery.
Step 6 :- Now Install "Flashfy.apk" and select "Flash Recovery" and browse to the extracted rooting kit and open CWM Recovery and select "recovery.img" it will flash and ask for reboot into CWM Recovery .
You can also install stock recovery this way too just choose the Stock recovery file
Step 7 :- In CWM Recovery select the option "Install Zip from SD card" and browse to the rooting kit and select "CWM-Superuser-3.1.3.zip" that will install a permanent Superuser [Root]
Step 8 :- Uninstall Flashfy and Root Master [Optional]
and now I can't to go in recovery or downloadable mode. what I can do? thanks
Have you tried?
volume down + Power + home
Volume up = recovery mode
Volume down = odin mode or download mode..
If you can go in download mode... Flash cwm or stock recovery with Odin
Hit thank button if this post helped you
First of all
Galaxy S duos GT7562 is running on Android 4.0.4 coz i own this device..
Here is the simple rooting and CWM installing method
1) Search "Poot.apk" in google and install it
2) Open the app, it will prompt you to Playstore to download Ministro II, download,
3) After downloading Ministro II, go back and click on "Click here to root"
( it will root your device permanently and will install Superuser)
4) Reboot
For CWM,
1) download and install "Mobile Uncle Tool" from playstore or from anywhere
2) locate to "recovery.img" stored on your SD card, select it
3) It will install the recovery image file and your phone will reboot
I hope this will help you
General discussion topic and Guides for the ZTE Blade Vec 4G/Orange Rono/Sosphone 4G/Turkcell T50.
Root
1. Activate Developer Options, and tick USB Debugging.
2. Install from Google Play:
-BusyBox
-RootCheckerBasic
3.Install the 2 apps in the attached archive.
4. Open the app with a chinese name. Then press the only button on the screen, after that press the round button found next to the top.
5.Open the KingUser app, who will get root permission.
6. Enter busybox and wait for the initialization to finish. Then press install and give it root permission.
7. Install SUperSU from the playstore and press Update Binaries and then Normal. If you get an error, restart the phone and try again.
8.If it finished successfully, DON'T press restart but rather Delete the data of the 3 apps installed(2 chinese and one KingUser), and uninstall them.
9. ???
10. Profit. Now you haver permanent root and SuperSU as root manager. If everything was done corectly, RootCheckerBasic should show that the phone is rooted.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatS3JlUzMtd3FxZjQ/view?usp=sharing
TWRP Recovery
You need to be rooted to try this.
1.Download and extract the "TWRP.img" file from the attached archive. Push it to the phone in the root directory of your sdcard.
2.Install "Flashify" from the Play Store.
3.Open the program and give it root access.
4.Select the "Backup/Restore" tab, then click "Backup Current Kernel" and "Backup Current Recovery". The app will backup your kernel and your recovery and will place them in "Android/data/com.cgollner.flashify".
5.Click on the "Flash" tab, Then click on "Flash Recovery", then on "Choose File". Select the "TWRP.img" file.
6.Press on "Yup!" and wait.
7.Now we can use TWRP Recovery by powering the phone up with Volume Up and Power.
Archive:
https://drive.google.com/file/d/0B9WMSJf5LSatZ0hpLTc1UmxtNDQ/view?usp=sharing
DemonROM by me - Deodexed - Cleaned - Based on the Norway ROM - Europe only ( International version comming soon)
Here is the LINK.
https://drive.google.com/file/d/0B9WMSJf5LSatOXRTb0dkNzV4NWM/view?usp=sharing
Be sure to make a full wipe before/after flashing for an optimal experience.
Tested on Orange Rono, but it should work on any device from Europe.
Be sure to flash some zips after that:
*GAPPS https://drive.google.com/file/d/0B9WMSJf5LSatT1lTWHZRZUhpZFE/view?usp=sharing
SuperSU https://drive.google.com/file/d/0B9WMSJf5LSatV1Z6Mk5YakZaT2s/view?usp=sharing
BusyBox https://drive.google.com/file/d/0B9WMSJf5LSatWTBtT1lSenE1aDg/view?usp=sharing
* MUST be flashed.
Have fun !
My Google Drive directory, dedicated for the ZTE Blade Vec 4G development.
https://drive.google.com/folderview...MzSnJtUlJsT1FBNWhYcGJJMnZtTTAwMHc&usp=sharing
MEGA directory with all of the Stock ROMs
https://mega.co.nz/#F!i8p3yLqA!ppd_x-aMyh4sce-8fJTffA
Post here any questions that you have.
I had a problem with TWRP .after flashing with flashify .vol up and power button works to boot in recovery but stuck in a logo" win team" for 2 mins and restart my phone.. Can't access my recovery
The ROM does not contains the kernel or i don't see it lol, great job anyway :good:
My Wifi Doesn't working but it was a good rom !
GT-P5200 ROOT
1.INSTALL ZIP PACKAGE AND DRIVERS ON PC
2.ENABLE USB DEBUGGING
3.CONNECT DEVICE TO PC
4.OPEN ODIN
5.BOOT INTO DOWNLOAD MODE(TURN OFF/VOLUME DOWN + POWER BUTTON/VOLUME UP TO CONTINUE)
6.CHOOSE PDA AND GO TO "DOWNLOADS/" AND FIND,DOUBLE CLICK recovery. tar.md5
7.UNCHECK AUTO REBOOT
8.MOVE "UPDATE-SuperSU v2.46" to your device
9.Click START
10.WAIT UNTIL THERE IS THE PASS SIGN.AFTERWARDS,BOOT INTO RECOVERY MODE(POWER BUTTON + VOLUME ÚP)
11.UNPLUG DEVICE.CLICK INSTALL AFTER GOT INTO RECOVERY .
12.CHOOSE THE SUPERSU ZIP.SWIPE AND FLASH
13.REBOOT SYSTEM
14.DOWNLOAD ROOT CHECKER AND ENJOY(while u can)
P.S:YOUR WARRANTY IS NOW VOID
SAMSUNG USB DRIVERS: http:/*******/1NsfbN = Rememeber to put ADFLY:highfiven
Zip Package: http://www.mediafire.com/?brutt176j64f1xv
MOD EDIT
Here is the new easy guide to Root Your A092 Unite..
(By Shantanu Suryawanshi)
Requirements:
1. A092 Windows Drivers..
2. Root Tool Kit.zip
3. Supersu.zip (Root Access.zip)
PROCEDURE:
At the beginning install all the A092 Drivers.
Turn our mobile's USB-DEBUGGING On..
(By going to Setting- Developer Option- USB Debugging.)
Copy Supersu.zip in your sdcard.
Connect the mobile with USB to your Computer & Open Flash all.bat
You are done you have just flashed Philz Touch Recovery.
Then switch off your A092.
Then just go to recovery by holding volume up + power button simultaneously when your A092.
Select Install Zip from sdacrd.
Select Supersu.zip
Reboot system..
You are done you have rooted your A092..
So Enjoy..
I am not responsible if you brick your A092..
Links for Download:
Root kit: https://drive.google.com/file/d/0B7R8HX8LjfZkMy1lNU5Ga1RRWUk/view
Supersu.zip: https://drive.google.com/file/d/0B7R8HX8LjfZkb0RlNGdfZ3JKWUE/view