Hi bro,because i'm too lazy to type the word so i copy all word from facebook
Someone can help me? Something isn't right after i changing usb port,when my phone is off and i goto download mode then connect it with computer,odin can detect it,but after connected it while off and turn on the phone then go to download with press powerbutton->reebot->download mode magically ODIN CAN DETECT IT!!!! i was reflash CM10.1 A9,but no success,but if i reflash the phone with repatition it,after flash PIT file my phone can't turn on and do this again(press powerbutton->reebot->download mode) someone know my it's my problem?
Click to expand...
Click to collapse
That all my prob,hope someone can help me
Related
i got tired of trying to figure out how to use adb as far as i got to was the command thing and got into android sdk tools but since my device is bootlooped i cant use debug mode there for it couldnt read my device so i did some research on my samsung admire and saw the odin mode flashing ur firmware so i thought oh cool well im in odin mode what is it downloading lol
Basically odin mode is when your phone is recognized by odin. When you have odin installed, your phone will be recognized by Odin when there is a yellow box with COM## (numbers dont matter), assuming you have all the proper drivers installed.
couldnt i download odin on my computer and put it on my sdcard using a cardreader then put the sd card back in my phone then go to system recovery and install iit from sdcard and it will fix my bootloop?
I doubt it, plus why would you want to anyways? Just seems like a whole bunch of extra, if not unnecessary steps. Easiest way to get into odin mode would be to have the proper drivers installed, put your phone into download mode, let Odin recognize your phone by showing a yellow box with a COM followed by any number, the you flashing whatever you need.
but im bootlooped i have to get stuff from my laptop and use a cardreader to put on my sdcard then install from sdcard in recovery
Odin is for windows
Odin doesn't go on the phone it's for your computer.
QUOTE:
You first and foremost need to download ODIN zip file from the XDA developer forum. You will be provided with the link. You can then extract the ODIN folder into your computer.
You can now use the data cable to connect your Samsung phone to your computer.
Put your Smartphone off and remove the battery.
Then you can turn the phone on whilst you hold down you Home, Power and the Decrease volume keys to go into the download mode.
You can now launch the ODIN on your computer. Then click Auto reboot. All together, you can click PIT and select the PIT file that is associated with the Android ROM that you are flashing using the ODIN android. You can now click PDA and make sure that you select the TAR file for the ROM.
Last but not least, you can click start to add the ROM to you Smartphone. Note that, the installation will be complete when the phone reboots automatically. You can then unplug the phone and enjoy the new changes.
this will work for my samsung admire and remove the bootloop?
it costs to download odin?
Try this:
forum.xda-developers.com/attachment.php?attachmentid=725858&d=1316556218
asking_alexandria27 said:
it costs to download odin?
Click to expand...
Click to collapse
I guess nope!
Hi everyone,
I tried to root my Samsung Galaxy following the guide from xda developers (http://forum.xda-developers.com/showthread.php?t=1056334).
I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging)
I started ODIN, then my device rebooted. I started SuperOneClick and I received a message saying "device not found".
Then I went to check the guide, and I saw that I forgot to enable the USB debugging mode on the device (Settings -> Applications -> Development -> USB debugging).
Can anyone help me to fix this?
I'm from Portugal. If I wrote anything wrong sorry for my mistake and for any inconvenience.
Thank you for any help.
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Do you have the latest drivers? Have you killed all KIES apps?
hompsar said:
Not sure if you're just having problems with Odin recognizing your phone or not but the basics are to ensure you have the phones drivers installed and enable usb debugging. Afterwards you make sure your phone gets recognized fully from your computer once plugging it in. If so you start Odin AND THEN plug in your phone with the directions for getting to download mode (removing battery and holding volume button etc) and in Odin it should show a connection on a com port tile. Then you load up your files and send them. If anything I am sure you just may have a problem by not being in download mode?
Sent from my SGH-T989 using xda premium
Click to expand...
Click to collapse
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
heretix said:
Do you have the latest drivers? Have you killed all KIES apps?
Click to expand...
Click to collapse
I have the latest drivers from my cell phone operator. I can only have access to Kies on my pc (but now, kies doesn't recognize any device plugged to the pc), my phone don't let me gain access to the menu and to any application.
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
utahst8 said:
Get into download mode and go into keis and start a firmware upgrade and initialization. (you will need model number and serial number behind the battery) and go through the process it tells u to. Then you will be back to stock, then try to root from there the proper way.
Sent from my SAMSUNG-SGH-I777 using xda app-developers app
Click to expand...
Click to collapse
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
mrmister2010 said:
I did what you said, I get into download mode, then pressed the volume up key to continue. I started KIES on PC and it doesn't recognize any phone plugged in USB port. I tried to start the firmware upgrade and initialization and then KIES show me the message: "GALAXY SII (GT-I9100) does not support initialization".
Any suggestion o fix this?
Thanks for the help.
Click to expand...
Click to collapse
What carrier are you going through? Some of the carriers the phones wont do this in keis
utahst8 said:
What carrier are you going through? Some of the carriers the phones wont do this in keis
Click to expand...
Click to collapse
I don't know what you mean with "carrier".
Is there any chance to copy a tar file with ODIN that let me gain access to the cell phone?
beacuse this happened when I use Odin to copy the XWKDD_insecure.tar to the phone.
thnaks for the help.
mrmister2010 said:
The only thing that my device do it's when I press power on it appears the image of samsung galaxy and the yellow triangle above. It doesn't do anything more. it is blocked on that image. I can ear in my computer the sound of some device plugged to the usb port, but don't detect any device. It only makes the sound of some device that was plugged to the usb port.
But I can put my device in download mode. What files I have to send? but I don't know what files I should send to the device. Can you please help me?
What I have to do in odin?
thanks
Click to expand...
Click to collapse
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
+1
Sent from my SGH-T989 using xda premium
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Thanks a lot. Done and fixed. It's all ok now.
Thank you very much.
No problem mate, as long as it works.
Sent from my GT-I9000 using Tapatalk 2
Forgot to enable usb debugging while flashing, got s2 bricked
heretix said:
You could find a stock ROM first (depends on where you bought your phone / country, provider) and flash through Odin. Unplug your phone from your PC > task manager > kill all KIES apps > turn on your phone into download mode > open ODIN > connect phone to PC
Then ODIN should show your phone is connected with a yellow box, depending on what ROM you downloaded you put the needed file in the PDA box (file with the name such as I9100XWLP7_I9100XXLPS_I9100XENLP3_HOME.tar.md5), click START and wait until that box goes from yellow to green. Phone should reboot now. If it gets stuck, get into the recovery mode (Vol UP + home + power) and wipe everything.
Click to expand...
Click to collapse
Hi,
me too dug deep into the same situation, but when i followed the above step,it didnt get fixed only difference was my yellow triangle got disappeared but still bricked.i did factory reset and cache wipe , no help.
Phone Info:-
S2 - India
stock rom XWKE8 GingerBread
Forgot to enable USB Debugging( since got carried away with my concentration on fixing usb drivers with kies) while doing my first rooting.
i am able to goto download mode and recovery mode as well.
Please do provide me with suggestions..
Regards
Newbie
Galaxy GT-S5660 GIO break
newbie24 said:
Hi,
I have (had ) samsung galaxy gio, i tried to root it then install android 4.2.
1- I forgot to set "Debugging mode" on from the setting.
2- During upgrading from zip file from SD card, battery finished (I know I screwed it up, that day was terrible).
phone does not work. when i turn it on, i have got double boot logos "Galaxy Gio GT-S5660". i mean two startup logo alongside eachother on the top of screen in decreased size. and phone hang on this state. when i try (power + home button) i get normal recovery mode with android sign and alert sign in triangle.
of course any help will be appreciated.
Click to expand...
Click to collapse
This thread is for those friends who are new to android.
I found that many of us, who wants to move from custom roms to stock roms through odin, have faced some big problems like MIBIB download or SETUP CONNECTION . This happened with me as well... when I moved from cyanogenmod to froyo. So, based on my experience, here are some suggestions which may help you:-
When you select the OPS file, check its name. Its name should be "BENI_v1.0.ops" (without quotes) otherwise odin will not show your device's model number at the top and will stop at MIBIB Download. Please Note that as soon as you select the ops file, odin will show the model number of the device in its title bar regardless of whether the phone is physcally connected to PC or not. In my case, the mbib download problem is solved by renaming the OPS file. You can now install the stock firmware as normal.
If odin is showing the message "setup connection" and your Galaxy Fit is still connected to PC (i.e. COM port mapping box is yellow), then try another stock firmware. In my case, odin stopped at setup connection when I was installing froyo, so then I tried the One Package Gingerbread firmware. And Odin successfully installed it(you can also try another usb port). After then, I went for Froyo once again & Odin successfully installed it too.
Please remember that doing things unknowingly may damage your device. Once the phone is in DOWNLOAD MODE, it can not be switched on either normally or in recovery. It can only enter in DOWNLOAD MODE. I had the two firmwares when I did all this.
Hope this helps...
Press thanks if I helped you...
U saved my day ....
stuck at mibib download HELP!!
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....
Shubhrank said:
sir i am stuck at this mibib download....my file name "BENI_v1.0.ops" is exactly same as yours but my odin is not moving further than mibib and whne i tried to go to recovery mode its show a sign displaying a phone disconnected to a pc monitor.....is this sign is harmful for my fit???
Plzzz sir help me out.....
Click to expand...
Click to collapse
Note that if ur usb port malfunctions then odin will not proceed further. I recently noticed this major issue. Other errors like "checking plact platform verification" appear due to usb error. Try another pc or laptop(recommended).
1st & 4most, it's necessary that u tick "USB debugging" under "Android Settings->Application Development" b4 going to download mode.
Also, disable any antivirus, firewall...uninstall kies...& at last install/re-install ur Samsung Mobile Drivers. Use Odin 4.38.
The screen u mentioned appears when u exit download mode & try to switch it on either normally or in recovery. Don't worry...!!
1. Take out & re-insert battery.
2. Press "Volume Down & Home & Power button" & you'll again enter downloading mode.
If u want...I can provide u the firmware files that I always use
Hope this helps...!!!
MBIB and setup connection
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:
gaurav.gupta180687 said:
I have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Please sort my problem ASAP, as I have only that one phone.:crying:crying:
Click to expand...
Click to collapse
Check ur pm.
gaurav.gupta180687 said:
have got the same problems of MBIB download or setup connection error and after trying to on it in recovery mode it display image of mobile phone not connected to pc.
Click to expand...
Click to collapse
Me too. Except on a GT-S5830i. Any help anyone? I have a .pit file etc but not sure what it is. Can't see the device in fastboot either
Hi,
I've download Odin 1.85 and two more files coming with which is Odin3.ini & u1_02_20110310_emmc_EXT4.pit
I let my phone into downloading mode.... and there is sound that pc detect usb but Odin still not show anything.
I'm using direct usb and tried another port but still same. I reinstall and install back until pc show driver is ready to use in green color still not find mine even beep sound is normal. All my port is ok, tested with other gadget and is working.
Please help me. Before it happen, I at rom Gamerz and trying to flash with [ROM][A8][4.2.2] remICS-JB [V6][02/08/13] ~STABLE~
So, it just hang at logo and cannot enter recovery, either. I also download heimdall still no luck. I re and install kies and it says "device is connect to pc" means no issue at all with usb but why odin not found.....
Please help
exz8 said:
Hi,
I've download Odin 1.85 and two more files coming with which is Odin3.ini & u1_02_20110310_emmc_EXT4.pit
I let my phone into downloading mode.... and there is sound that pc detect usb but Odin still not show anything.
I'm using direct usb and tried another port but still same. I reinstall and install back until pc show driver is ready to use in green color still not find mine even beep sound is normal. All my port is ok, tested with other gadget and is working.
Please help me. Before it happen, I at rom Gamerz and trying to flash with [ROM][A8][4.2.2] remICS-JB [V6][02/08/13] ~STABLE~
So, it just hang at logo and cannot enter recovery, either. I also download heimdall still no luck. I re and install kies and it says "device is connect to pc" means no issue at all with usb but why odin not found.....
Please help
Click to expand...
Click to collapse
disable all kies services than run odin....CMIIW...
deDante said:
disable all kies services than run odin....CMIIW...
Click to expand...
Click to collapse
done, even uninstall completely but no change.....
okay... turn on internet on your pc and then connect your phone in download mode.. pc will download required files automatically.. and i hope usb debuging mode was on while you connected before. .
let me know if it worked and only then hits thanks orelse dont
Howdy,
I've screwed up with installing a custom rom over another custom.
Now I'm getting an error:
Firmware upgrade encountered an issue. Please select recovery mode in kies & try again.
It's a tablet:
Samsung Galaxy Tab 2 10.1 (p5100)
In my computer im using windows 10 pro, and adb device is not regonized.
What I neeed to do to get pasted that error?
Thanks for the help!
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
OOO thanks for the reply.
But I'm getting trouble to get into Download Mode, I mean I can't get in no matter what I do.
I've attacked a screen which I thing that Odin get's the device. Is this ok?
Thanks for the support!
_______
I've just flashed the TWRP recovery over the old one and know it works! YAY.... ODIN FTW
Zte blade l said:
There is nothing to worry.
It is easy to solve this.
Just download Odin in your pc.
Download the official firmware if your device here.
http://www.sammobile.com/firmwares/database/GT-P5100/
Now open Odin In pc
Connect your device to the pc .
Now in the app under PDA browse for the firmware you have downloaded and click start.
Wait till it says pass.
That's it you have successfully solved your problem.
Now it will take some time to boot.
In case you feel that you are in a bootloop just go to recovery and perform a factory reset .
Odin download http://odindownload.com/download/Odin3_v3.10.6.zip
HIT THANKS IF THIS HELPED YOU :good:
Click to expand...
Click to collapse
Greetings;
I don't know if you already entered Download Mode...
Most problems accessing Recovery and Download Modes are due to having the USB Cable connected.
Remove the cable; press the key combination; and it will boot.
(Except if there's some incompatible ROM flashed by mistake).
After that plug the USB Cable again (if your USB Drivers have also installed for Download Mode) Odin will recognize it (like shown in your Screen Shot).
REMEMBER:
While Flashing do NOT Remove USB Cable, untill Odin Displays "Pass" message.
Further issues: Let us know. We're would be Glad to help.