Hi GUys,
I have a rooted micromax canvas 2 HD A110 with custom ROM and kernel only rooted. I tried your procedure but nothing happened. NO swap created for RAM. is it necessary to have custom ROM. Please tell me the right procedure to create and increase RAM in my phone as it has just 512mb of RAM.
thank you. Looking forward for your reply.
Uninstall the drivers from PC.
Restart the PC.
Install the drivers.
Connect your phone and start USB debugging.
It will install the drivers.
Now switch off phone and connect again. It will install drivers again.
Restart PC.
Remove mobile baterry and put again.
Now root your phone. It would work..
Sent from my Micromax A110 using Tapatalk 2
Related
I have a Canvas 2 ..I downloaded the drivers,the firmware and sp tools and I followed the procedure and clicked on "Firmware upgrade" then I switched off my device and plugged it but it doesn't start the flashing process.
In the bottom bar it says "searching" and doesn't change at all !
What do I do ?
My device is not rooted or neither had a CWM and i don't want to root also !
Now what should I do to get my device updated with official stock jellybean ?
In the bottom bar it says "searching" and doesn't change at all !
I think , u switch off the device and connect the USB after it says searching
Sent from my Micromax A110 using xda app-developers app
venu007 said:
I think , u switch off the device and connect the USB after it says searching
Sent from my Micromax A110 using xda app-developers app
Click to expand...
Click to collapse
Yeah ! I did that only but still it says "searching"
Vishrut Chhajer said:
Yeah ! I did that only but still it says "searching"
Click to expand...
Click to collapse
Bro I to had a similar problem
1)if you have drivers of any other android it doesn't work in my case install samsung kies
2)use drivers of mobistel cynus t2 drivers for best results
Hit thanks if helped
See I have these drivers installed.
1) Samsung USB Driver ...since I have a Galaxy ace also.
2) Micromax Driver which is found in the mobile itself when connected to the pc
3) Mobistel driver
4) VCOM driver
that's all ...why one of them should I uninstall ?
Vishrut Chhajer said:
See I have these drivers installed.
1) Samsung USB Driver ...since I have a Galaxy ace also.
2) Micromax Driver which is found in the mobile itself when connected to the pc
3) Mobistel driver
4) VCOM driver
that's all ...why one of them should I uninstall ?
Click to expand...
Click to collapse
Uninstall Samsung driver bro couple of days back while flashing through flash tools it keeps searching before that no problem I have remembered that I have installed drivers using kies to flash through odin jst tried uninstalling kies and samsung drivers my problem solved
Sent from my hyperion rom
install mediatek vcom drivers...dats it.
Dj_cool said:
install mediatek vcom drivers...dats it.
Click to expand...
Click to collapse
Even after installing VCOM drivers ..I faced the same issue ...should I restart my pc and try or something ?
I don't know how but the problem got solved by clicking the DOWNLOAD BUTTON ! ...
Now i'm using jeallybean which is bloody fast.
Thanks anyway
SEARCHING
now i have the same problem..
windows 8.
all drivers are installed.
baterry removed n connected to pc via usb.. what else to do.. ???
Anyone
I have same problem. All drivers installed.
What should I do?
My mobile : Lenovo s650
Thanks
Whenever I connect my phone to the PC I'm not getting the connecting options..like whether to use the USB mode or MTP device etc. This issue started after I flashed JMP Xtream rom 3 months back. I told my problem to the service center but they are saying that they cannot help me.
I tried using my friends data cable but still no luck. But whenever I connect the phone its getting detected as an unrecognized device. I can charge the phone but cannot connect it. Also USB OTG is not getting detected even by using apps like stickmount and USB host controller..
Im irritated with the prob and require some help...any solutions for this prob..Im currently using Suvi v12 rom...
Try to install ur phone drivers correctly
Or i can suggest u to do this:
Download moborobo pc suite
Enable usb debugging on ur mobile
Connect ur phone to pc
Now open moborobo
You can also use wifi to connect to ur pc
Sent from my GT-S7500
same here..srsly irritated from this problem ...i evn made CWM backup of stock ICS from a friend's A110 still no USB options coming... plz help devs..
Sent from my Micromax A110 using xda premium
[email protected] said:
same here..srsly irritated from this problem ...i evn made CWM backup of stock ICS from a friend's A110 still no USB options coming... plz help devs..
Sent from my Micromax A110 using xda premium
Click to expand...
Click to collapse
Do u have wifi?
Then u can use moborobo pc suite
Sent from my GT-S7500
[email protected] said:
Try to install ur phone drivers correctly
Or i can suggest u to do this:
Download moborobo pc suite
Enable usb debugging on ur mobile
Connect ur phone to pc
Now open moborobo
You can also use wifi to connect to ur pc
Sent from my GT-S7500
Click to expand...
Click to collapse
Phone is not getting detected at all when connected with cable...Its still coming as unrecognized device...
Wifi is the only option available or using the bluetooth connectivity option....
But there should have been an option to restore those connection options back...specially after flashing stock rom using CWM...
Download vcom drivers
It may help u
Sent from my GT-S7500
Try reverting to stock rom or flash some other custom rom as drivers are unable to serve.OR you can (after making a backup) wipe all your data.....restore factory settings on your fone as dis will remove any virus or faulty setting(some system paths nt shown in general).
HOPE IT MAY HELP YOU.
Sent from my Micromax A110 using xda app-developers app
Tried installing VCOM drivers long back but still its getting detected as unrecognized device...
Also tried restoring through back up of stock rom v2 using cwm but still no luck
Just now tried by restoring to factory settings but no luck again....
Instead of installing drivers on comp..are there drivers for phone and all??
"Run "regedit"and select the "HKEY_LOCAL_MACHINE/SYSTEM/MountedDevices" folder. See all the "Dos Devices" listed? You'll have one entry for each physically mounted drive (HDD or Disc) plus you'll have one show up for each USB drive you attempt to insert. Double click each device listed and seeifyou seetextsaying something like"U.S.B.S.T.O.R...". Once you find that device, right click it and select "Rename". Now change the drive letter to something unused... like Q: or something. Close regedit, disconnect the USB device and reconnect again.
This will fix ur problem:thumbup:
Sent from my GT-S7500
If nothing is helping u den u must revert it to stock rom(unrooted) n get ir warranty back n take it to service crntre.
After everything goes right u can root it again and do vatever u want.
Sent from my Micromax A110 using xda app-developers app
I can connect with wifi using mobo daemon...other method dint work..thanks for the help...
iam using micromax a58...i want to install a58 drivers...i connet my phone through usb cable to pc but thr is no
"""""""""""YELLOW exclaimation sigh On the Device Manager screen""""""...................finally i sw it in DEVICE
MANAGER///DISK DRIVES//MICROMAX................and i right clicked tryed to update drivers..but gt a
error....cannot continue the hard ware update wizard ...pls help me frendz .....
Guys my Micromax canvas 2 is not detected by any PC. But it charges well. I heard that it is a problem in most of the canvas 2 phones. I found a solution to wipe cache and then connect. But it is of no luck. Kindly help me to get this canvas 2 connected to pc. I'm afraid what can I do if the device is bricked.
if you have checked your setting ->developer options
Than try changing Kernel & ROM
Hi, i recently flashed samsung s5 rom by santosh for mmx a250 in my mmx a117.. Bt it was accidental.. Bt i did not face any prob of booting or installing another rom.. The problem is my pc wont recognize my usb device and i cannot connect my phone or sd card with pc.. Under device manager it says usb device not recognized. Since i flashed wrong rom this problem occur. I cannot connect with sp tools also for flashing stock rom.. Tried everything but of no use. Please someone help me.