Database Info

[Q] Is that end of my p-920 ?

Well, I have LG Optimus P-920
since morning working on CM 7 Nightly 23
today I was replaced sdcard to 32GB 10, reboot phone and.... nothing
even pwr+vol up not working, totally not responding
I've tried reflash on LG flash tool but after connect to usb with vol up computer recognize omap4430, thats ok, but that device blinking in device manager, one second is there, one not , no LG USB CDMA serial port
what should I do in that case, please help me

You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App

winb87 said:
You replaced sd card. Did you try switching back some times s*** messes up. And doing the follow steps you listed. Throw some tips guys. Bump.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switching back ?

You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App

winb87 said:
You switched sd card? Switch back to the one you had before.
Sent from my LG-P925g using XDA App
Click to expand...
Click to collapse
switched back, still no response..:/

I posted a thread with the same issue a few weeks back.
No, it's not the end of your phone. You'll need xp/7 to repair the phone (since I'm on linux I can't currently repair it).
Use the LG tool, remove battery and insert it back, plug in usb and hold pwr+volup(or down) can't remember which one. Your PC will find a OMAP4430 device.
There is a few threads how you can repair your phone using emergency mode in the LG tool, you'll need to enter your IMEI etc.. Look in the Development section and look for the right thread.
My thread:
http://forum.xda-developers.com/showthread.php?t=1439373

I've tried that resolution, but t dont works, omap4430 blinking in device manager, cant use lg flash tool

Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.

w8st8 said:
Did you really press the right volume button? I've had that blinking-problem,too, until I pressed the other volume button instead.
And there's no need holding the power-button for doing this.
Click to expand...
Click to collapse
I think...... but I'll try again
trying......still blinking
please give me what should i do step by step, any sequence I tried doesn't work still blinking

Remove battery and blink will stop!

ul71m0 said:
Remove battery and blink will stop!
Click to expand...
Click to collapse
still blinking, even after battery removing

andriu123 said:
still blinking, even after battery removing
Click to expand...
Click to collapse
Try reading this
http://forum.xda-developers.com/showthread.php?p=21096612
good luck

You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.

vanpe said:
You could get it back andriu? I'm in the same situation, the pc still blinking in any combinations and the driver omap 4430 never installed.
Sorry for my bad english.
Click to expand...
Click to collapse
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him

andriu123 said:
my english is poor to
about phone, hmm
today he went to service warranity , no solution has helped, i tried everything
we'll see what say service engineers, I hope that will fix him
Click to expand...
Click to collapse
You tried to install the drivers from xp? I'll try this before use the warranty.
How much time have your O3D?

tried on XP, Vista, 7
O3d have since about six months

Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App

MemoryController said:
Have you tried different USB cable? Had same problem with Odin and Galaxy S2, odin would fail flashing and not detected sometimes.
Sent from my GT-I9100 using XDA App
Click to expand...
Click to collapse
Yes I have tried differents USB cables (3 concretely). I'm desperate.

Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance

josuelopezv said:
Once I bricked my phone y recovered it installing all the drivers including the omap one and using the kdz falshing tool.. if the omap chip is still functioning there is still a chance
Click to expand...
Click to collapse
Where do you get the omap drivers? Automatically whit the O3D in emergency mode?
My computer detects that driver but not install it, seems like a bucle try/error/try/error.

One S Still not connecting to my Win7??

I just don't get it, I've tried uninstall/reinstall the drivers (current) plus reboots and also multiple usb ports plus turned off all security on my pc just incase with no luck so WHAT IS GOING ON!!?:crying:

Anyone or any site to go to that deal more with computers, I know no links to other sites/forums but maybe PM me
Sent from my HTC One S using xda premium

Well... google knows almost everything
... But.. ."not connecting" isnt really much info to go on. Try to explain a bit better what happens and whats not.

It keeps flashing the 'USB Debugging Connected' than sometimes the pop up comes up on phone to allow 'Charge Mode/Disk Drive' but not always and my computer (Win7) tries to install the driver, it just keeps saying not connected when open HTC Sync and yes have tried all USB ports and uninstalled drivers also under 'Device Manager' there are no exclamation marks anywhere
Sent from my HTC One S using xda premium

Here something I do if something bugged me and can't fix it and that is to format windows lol.

Darknites said:
Here something I do if something bugged me and can't fix it and that is to format windows lol.
Click to expand...
Click to collapse
lol yes, Im the same... fuking winblows :laugh:
But anyway... Have you tried on a different PC? Does it charge as it should through the usb ports?

Goatshocker said:
lol yes, Im the same... fuking winblows :laugh:
But anyway... Have you tried on a different PC? Does it charge as it should through the usb ports?
Click to expand...
Click to collapse
Ya I wish I didn't game or I wouldn't even be using it. And I think he said he only got one the pc to try on but would be nice if a friend helped out to see if it his pc or the phone.

Wow, I have the same problem, except I'm running Ubuntu on my PC.
http://forum.xda-developers.com/showthread.php?t=2014986
Worst part is that I'm making an app. I can't do this if it keeps disconnecting every half second!

I'm having a similar issue although I'm running Mac. Im running stock HTC rom and have just installed the update. When I plug the USB cable in I no longer get any connection options. HTC Sync can see my phone but I can't access the phone storage from my Mac anymore....Am I completely missing something or is anyone else having similar issues?

glynevans said:
I'm having a similar issue although I'm running Mac. Im running stock HTC rom and have just installed the update. When I plug the USB cable in I no longer get any connection options. HTC Sync can see my phone but I can't access the phone storage from my Mac anymore....Am I completely missing something or is anyone else having similar issues?
Click to expand...
Click to collapse
This thread here might help you.

I think you need to download the driver
Sent from my black Samsung Galaxy Wonder which running on Cyanogenmod 9 beta 4 using XDA Premium.

Ivanthe17th said:
I think you need to download the driver
Sent from my black Samsung Galaxy Wonder which running on Cyanogenmod 9 beta 4 using XDA Premium.
Click to expand...
Click to collapse
You did not read my OP right cuz I said all that in it so next please also I have 'Googled' everything and tried everything they say so any other thoughts, just want to get connected so I can flash ROMs once rooted?

Anyone, please any ideas other than those posted and please read before posting something I've already done?
Thanks

Well, its hard to go further... Try a different cable and a different PC. If it doesnt work with that either its your phone thats fuked up, if it works its your PC.
When you know which is the culprit we can move forward and try to solve it.

Goatshocker said:
Well, its hard to go further... Try a different cable and a different PC. If it doesnt work with that either its your phone thats fuked up, if it works its your PC.
When you know which is the culprit we can move forward and try to solve it.
Click to expand...
Click to collapse
Agreed need another pc to test with.

Go to recovery on phone and it should then be recognized by pc...preferably use twrp for recovery. From there you can even mount usb to move Roms to you sd.
Sent from my HTC One S using xda premium

bochocinco23 said:
Go to recovery on phone and it should then be recognized by pc...preferably use twrp for recovery. From there you can even mount usb to move Roms to you sd.
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
Not rooted yet because of this issue so I found one thing that might work and will try later when home and that is what I found on Google after days of searching, restart the computer whole phone is shutdown and than turn on phone as computer boots up and see if it will than recognize the phone (crossing fingers)
Sent from my HTC One S using xda premium

Boot into bootloader and see if it's recognized by your computer. If it does then it's a Rom issue and you can factory reset from bootloader... (volume down + power) while phone is turned off
Sent from my HTC One S using xda premium

bochocinco23 said:
Boot into bootloader and see if it's recognized by your computer. If it does then it's a Rom issue and you can factory reset from bootloader... (volume down + power) while phone is turned off
Sent from my HTC One S using xda premium
Click to expand...
Click to collapse
I'M NOT ROOTED, there for not on a ROM and not trying to be rude or unappreciative but please read my entire post thanks
Sent from my HTC One S using xda premium

Well that worked:thumbup: but under 'Computer' on my Win7 pc out shows 2 kinda drives 'Removable G&F Disc Drives', when I click on then it says 'Insert Disc' and they weren't there before so I'm assuming they or one of then represent my device?
Sent from my HTC One S using xda premium

[Q] htc one x (at&t) not connecting to pc anymore help!

recently bought an unlocked one X it was running the software number 1.85 and i was able to connect it to the pc to move my files to it ,
recently i got the ota update (2.20) and after quite a bit of research decided to let it update.
even after the update the usb feature worked, and now it doesnot work at all it only chages i have tried
holding the power button for 10 secs with phone connected to the lap,desktop, (when i did this the first time it the chhosing menu that appears on the phone showed up but the pc didnt recognise the phone)
tried different wires
checked coonect to pc settings ( set to always ask, disk drive)
installed latest drivers and htc sync
tried factory resets
unab;e to do hard reset for some reason (android logo doesnt show up) only the three lights keep blinking and go off
the phone is fully stock and has never been rooted or flashed
all advice is much apreciated!

If the phone shows up in devices manager u could probly run a ruu and see if that fixes it there's guides in the dev thread if that doesnt see the phone then I'm not sure what to tell you?

Do you have USB debugging checked?
Sent from my HTC One X using xda premium

yes i tried it with debugging ON and OFF , still did not work :/

any help please? its still not working after all i have tried

yubr said:
connected to the lap,desktop
Click to expand...
Click to collapse
Does this mean you tried more than one computer? Its not clear. If not, try that. Also try different USB ports, as this has been known to solve the issue for some people.

Sorry disregard my post I can't wrap my mind around stock and ota
Sent from my HTC One XL

download HTC sync manager.. should automatically re-download drivers then connect phone USB to computer and try again with USB debugging on and phone in Transfer files mode

Sensation XE not turning on

today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63

hack-zone said:
today i was using my phone normally.. it was working perfect
suddenly the phone hanged up and turned off
i tried to boot it and nothing happened
any suggestions ?!
thank u all
HTC sensation XE
Hboot :1.27
unlocked
kernel: bricked
Rom:ViperS 1.63
Click to expand...
Click to collapse
try to boot into bootloader
then select reboot
see how it goes

rzr86 said:
try to boot into bootloader
then select reboot
see how it goes
Click to expand...
Click to collapse
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on

Is the notification LED blinking? Try charging the battery with a universal charger.

hack-zone said:
Can't reach the hboot :/
The phone is not turning on when pressing the power button
and when I plug it in the charge, the charging LED also is not turning on
Click to expand...
Click to collapse
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351

rzr86 said:
try charging the device without battery,sim and sdcard for 5-6 hours
then put them back and power on the device
if that fails too then
http://forum.xda-developers.com/showthread.php?t=1522351
Click to expand...
Click to collapse
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.

ashkan-khatar said:
buddy, I'd got this problem as well once, it won't work. If the LED is not blinking, according to ganeshp, it means a DEFINITE HARD BRICK.
so, I think THE ONLY way to solve it, is to use J-Tag (Or replace the mainboard, a little screwing off).
hope it gets alright.
Click to expand...
Click to collapse
yeah i know mate but for some users the unbricking project helped too
if that fails then the last option is jtag

Thank u all for your help guys

hack-zone said:
Thank u all for your help guys
Click to expand...
Click to collapse
did you fix it with j-tag?

Sensation xe beat Not turing on
rzr86 said:
did you fix it with j-tag?
Click to expand...
Click to collapse
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:

farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Hard brick, if you in US contact me, i do jtag service.

tomy1986.nt said:
Hard brick, if you in US contact me, i do jtag service.
Click to expand...
Click to collapse
I am outside US. can u fix it online?

farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
Sorry, Jtag can not do online.

@farazi482
Look here : http://mobiletechvideos.mybigcommerce.com/htc-sensation-4g-jtag-brick-repair/
These people do international business. I think you just need to pay the shipping though...
Sent from my HTC Sensation

deleted

farazi482 said:
Device is showing up in device manager > com port
but no light is blinking and phone is not charging not turning on
BUT pc notifies with sound that usb device is connected and notifies with when unplugged. what to do? :crying:
Click to expand...
Click to collapse
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine

Usb detection problemm
KernelDev101 said:
if you see your phone in device manager as QHSUSB_DLOAD or similar then it is bricked please go here to learn how to recover
Sensation Unbricking Project
And to the people who say if your phones LED no blinking it wont unbrick with Dexters unbrick project your wrong. 95% of the unbricked phones used in the unbricking project have NO blinking LED I did it to my old sensation when bricked going S-ON no LED only picked up in windows as stated above and fixed it on my linux machine
Click to expand...
Click to collapse
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?

farazi482 said:
Installed Ubuntu 12.04.. then it automatically installed 3 packages (dont know about that).. then extracted 32 bit files to Home
Problem: when i write ./brickdetect.sh in terminal it says "Device can't be detected. check connections.." although its correctly plugged in (without battery, sim, sd card)
any idea how to fix this issue?
Click to expand...
Click to collapse
plug your phone into linux and open terminal and type dmesg and send output on here

Ultra Hard Bricked OPO

Hey guys how are you?
Well a friend gave me an OPO that is really bricked.
Seems like it went to 0% of battery. I charged it to 100% but it does not boot. It stays in loop with the "cyanogen" logo
I tried every solution in every "hard brick resolution" thread.
Instaled ColorOS drivers, Samsung drivers, etc etc etc. nothing works, why? Well..
When i plug the phone on my computer, its recognized has MTP device. The "update driver" option is disabled. Its never recognized as qhsusb_bulk our adb or anything.
It does not seems to enter in fastboot mode ether, has i press vol up + power and it goes to the cyanogen logo again.
Im trying to do this recovery with an windows 10 64bit computer.
I tried to install qualcomm drivers also, but not compatible with my OS.
Not really sure what to do next..

I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.

hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
Thank you! But the download links aren't working

cheveux_ said:
Thank you! But the download links aren't working
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:

hea9vy said:
http://forum.xda-developers.com/showpost.php?p=58145465&postcount=48
You can find them in the post above. :fingers-crossed:
Click to expand...
Click to collapse
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times

cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Try it on a native USB port, so try different ports. Or if you have access to more than one pc/laptop try it on different ones.
I had the same issue a couple of months ago on my wife's oneplus. Spent an hour on my laptop and no go. Fired up the desktop and worked first time.

cheveux_ said:
yeah i searched and downloaded the x64 version of qualcomm
But i tried 20 something times to power on the mobile phone with vol up and no luck. still appears in the device manager as MTP device
Steps im taking:
1- Connect the phone with USB cable. Its starts charging.
2-let the screen go off then power + vol up. I let go power button has soon as the phone vibrates.
3-goes to cyanogen log and appears on the device manager as mtp usb device
tried that for 20 times
Click to expand...
Click to collapse
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?

Cholerabob said:
Read the answers that people give you " Tried VOLUME+DOWN " , did you try that ?
Click to expand...
Click to collapse
Yes. i Tried both :/

1st thing if it shows the cyanogen logo its not hard brick as per my knowledge.
Yes as suggested try different ports.

hea9vy said:
I had the same issue. Tried VOLUME+DOWN multiple times until it worked and showed up as "QHSUSB_BULK" and then used the OnePlusRestoreTool to unbrick the phone.
Manually selected these drivers for Windows 10 64bit through the Device Manager here:
Qualcomm HS-USB QDLoader 9008 2.1.0.5
x86: http://download.windowsupdate.com/ms...af53d237ff.cab
x64: http://download.windowsupdate.com/ms...ac311facc0.cab <-------- this one if you are on 64bit Windows 10
http://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Good luck.
Click to expand...
Click to collapse
hi. my friend. will this work for a 100% bricked? the phone cannot even show anything on screen
Sent from my ONE A2003 using Xparent BlueTapatalk 2

https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....

sanjeev7 said:
https://m.youtube.com/watch?v=O2_x9SnJ1Ak
This guide helped me in getting my dead opo back....
Click to expand...
Click to collapse
not working for me.
my PC cannot detect my opo
Sent from my ONE A2003 using Xparent BlueTapatalk 2

Can you get to fastboot?

evertking said:
Can you get to fastboot?
Click to expand...
Click to collapse
no. 100%bricked. go see the YouTube link above my pervious post
Sent from my ONE A2003 using Xparent BlueTapatalk 2

thx. my opo is un bricked. but now back to the problem before I bricked it.
the phone baseband is unknown (no efs save)
and the opo keeps rebooting every few second. is there a way to fix it?
Sent from my ONE A2003 using Xparent BlueTapatalk 2

So still no luck.
I have no fastboot and no recovery.
Has i connect the cable, it starts to charge.
If i click vol up + power it goes to the cyanogen logo and stays there...forever..
The problem is it is always recognized has "mtp device". I'm using an windows xp installation now...

Send me a PM and I'll try to help you!

Jeffrey98 said:
Send me a PM and I'll try to help you!
Click to expand...
Click to collapse
I think i can't send you messages, so here it goes
Hey Jeffrey! Has you asked, here is the pm.
So, in advance, thanks for your help. font know if this can be solved but its nice having someone interested in helping.
So, what i have:
- An OPO that doesn't boot.
- When i press the power button, it shows the one plus logo, and then the cyanogen logo, staying there forever..
- When i press vol up + power, it does the exactly same thing, never entering fastboot
- When i press vol down + power, it does the same thing. never entering recovery
I've prepared an old notebook with windows xp to unbrick the opo. Its completly clean.
The phone is always recognized has mtp device. I've installed all drivers on the internet. ColorOS, samsung, qualcomm, etc etc, everything. nothing works has its never detected in msm8974 or anything.
what can i do?
Thanks in advance

This might help!
If nothing works email oneplus and request for a remote session i did that and they flashed the os, and ps. while doing that they will tell you to download some files and in that some will be password protected and after completing the process they will delete the file so that we cant use it. If possible, after installing drivers they will tell u to reboot the system and log in back but after rebooting just copy the file to another place and then log in back so they can continue the process. Those files may be helpful for a lot of people.I have attached screen shots. Never mind the first folder, the remaining zip files are to be downloaded and in that two are password protected.