I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.
Dear guys and girls,
I have a problem. Since 2 days my tf300t is for some reason not starting up anymore. The start screen does not go away. Before it worked like a charm. I have tried almost everything, I can think of. As far as I know the latest firmware is installed. The problem is also that the tablet isn't in developer mode. So my options are limited afaik to fastboot. I have installed the naked drivers version 0.73. But windows is saying that the device is not started. Only fastboot is started as device. I have tried to reinstall the firmware by usb, but to no avail. It sends but doesn't write... I have drained the battery to zero level. Can anyone help me with this? What am I missing?
<>< A Dieu
Jaco Oversluizen
I'm also having this same issue. Tablet was working fine and then froze up. After rebooting we are now stuck on the Asus screen with the circular logo going. Waited over an hour with no change. Tried to boot into recovery and recovery crashes and gives me Error! This is a stock tablet that hasn't been unlocked or anything.
Update: Did a Data Wipe and the device rebooted and came up. Doing all the updates again. Hopefully it wont mess up again.
So you have an unlocked bootloader ?
(backstory) Hi, ive had an Asus TF300T, for about 3 years now, unlocked, rooted it pretty early on... cycled between cyanogenmod and omnirom quite a bit, without really any major issues. Until today, i was running Cyanogenmods latest nightly build (CM11 Nov 5 2014), it worked just as any other nightly does a few bugs here and there, but nothing major and i hadn't done any major flashing or modding to the device. On my home from university, I turned my tablet off. And when i got home i plugged in the charger, and just as always the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.5
I had TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Edit: I dont know why, but when i try using fastboot or adb, the device isnt recognized. It doesnt show up on device manager either. I dont know if its the cable cause i bought it new, it says its can sync data, or a faulty charge/sync port....
razr9622 said:
(backstory) the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.1 (I know that theres a newer version 10.6.1.27.5, but when i try to flash it, the recovery says error and fails)
I have TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Click to expand...
Click to collapse
^THIS!
I was just to open a similar thread, then i saw your post. I join your request for help!
A month ago i have done a favor to a friend by unlocking his tf300t and installing CM11 on it. A few days ago he comes to me with this problem. I've tried anything but still no success:
- restore a backup done before flashing CM11 --> restore ends correctly but the problem remains
- flash a rom (CM11 and OmniRom) --> flash ends correctly but the problem remains
- flash the stock firmware found on asus website (WW_epad-user-10.6.1.27.5.zip, the SKU is correct for my version) --> the flash process stuck (i had to force restart the tablet after almost 2 hours of "flashing")
Since the boot animation changes according to the rom, i suppose the flashing process works. But the problem remains: after a few seconds the animation freeze and the device restarts, in loop.
Informations on the system:
- build 10.6.1.27.5
- TWRP v2.7.0.1 (working!)
- adb works (i managed to set /data as rw and push the .zip file to flash)
- fastboot should work
Please help! I feel a bit responsible for bricking my friend's device
SOLVED!
Finally!
I had already tried this method, before requesting for help, but the first time didn't worked... I don't know why this evening the tablet decided to collaborate:
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
That worked for me! :victory:
Hi Friends,
I installed cm-13.0-ZNH0EAS2JK and it was running fine but today something weird happened. I rebooted my OPO and it got stuck in TWRP recovery.
No matter what I do, after powering up, it goes to TWRP recovery. I tried to installed another ROM also, but that also didn't helped.
Can someone please help me out over here?
Flash the COS 13.1 fastboot zip using bootloader...
deepakaryan1988 said:
Hi Friends,
I installed cm-13.0-ZNH0EAS2JK and it was running fine but today something weird happened. I rebooted my OPO and it got stuck in TWRP recovery.
No matter what I do, after powering up, it goes to TWRP recovery. I tried to installed another ROM also, but that also didn't helped.
Can someone please help me out over here?
Click to expand...
Click to collapse
I've got the same problem as you, but different build of cm13. Nothing I've tried has worked. Is there something wrong with your volume button by chance? I've researched this issue thoroughly, and that seems to be the common denominator. Apparently the volume button is somehow being pressed, and making the phone boot into recovery when powered on. If you figure it out let me know. It's the bane of my existence right now
Hi
I'm having trouble with my tablet. From time to time it stopped on the recovery screen and I can not get back to using it
I tried to use the original rom flashed in odin successfully
I tried to flash ROM customized by CWM successfully
The only problem is that as soon as I finish putting the rom, I turn on the tablet, the android doll appears as if it would finish the installation and hang up. I turn the tablet back on and go straight to the recovery screen, I wipe, reboot and return to the recovery screen. I do not know what else to do. If it helps, before giving an error called charging_10 jpg and logo_espresso10.jpg, today it does not give more. If anyone can help me. Thanks in advance.
Raylane Cristina said:
Hi
I'm having trouble with my tablet. From time to time it stopped on the recovery screen and I can not get back to using it
I tried to use the original rom flashed in odin successfully
I tried to flash ROM customized by CWM successfully
The only problem is that as soon as I finish putting the rom, I turn on the tablet, the android doll appears as if it would finish the installation and hang up. I turn the tablet back on and go straight to the recovery screen, I wipe, reboot and return to the recovery screen. I do not know what else to do. If it helps, before giving an error called charging_10 jpg and logo_espresso10.jpg, today it does not give more. If anyone can help me. Thanks in advance.
Click to expand...
Click to collapse
I don't know what you got going on, but cwm is outdated. New ROMs require TWRP.