I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
jubjubcat said:
I flashed the Cyanogen mod 10.1 nightlies for 2013-01-05. The boot animation was running for an abornomally long time so I pulled the battery and booted up and now the boot animation will not stop running. I tried searching for help but with no avail I have not found it too fix this problem. Also I made a CWM backup.
Click to expand...
Click to collapse
Also after trying too restore it, I just get the error Couldn't find directory no files found.
jubjubcat said:
Also after trying too restore it, I just get the error Couldn't find directory no files found.
Click to expand...
Click to collapse
Nevermind fixed it.
How did you fix it? rh
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
utsav7r said:
How did u fix it? I am facing a similar problem.
and when i tried to upgrade from cm10 to cm10.1 i was stuck at "Android is upgrading - Starting apps" screen. and a fresh installation of cm10.1 was stuck at the boot animation.
I am using Siyah Kernel 1.8.7 and having cyanogenmod as my secondary rom.
Plz help somebody
Click to expand...
Click to collapse
SiyahKernel s3-v1.8.8
Posted on January 13, 2013
Changelog
rebased on i9300 update7 sources (sudden-death issue is supposedly fixed in this source drop)
reverted temporary fix for exynos-mem exploit as i9300-update7 sources already fix that
cm10.1 is now supported in dual-boot configurations
1.8.7->1.8.8: fixed cm10.1 not booting when installed as 2ndROM (a tiny typo in ramfs)
BUT,it doesn't work anyway (just trying now at it's stuck on the boot screen)
Just try it and report back! :good:
You do realize that the siyah kernel is for the international S3 which has different hardware then our s3? If you are using a kernel for a different phone then of course it wont boot....
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
By "International", you mean the exynox version unlocked right?
Sent from my GT-I9300 using xda app-developers app
R: [Q] Flashed cyanogen mod 10.1, stuck at boot animation
Whatever, it's been released v1.8.9 and it's said to fix the CM10.1 issues
Sent from my GT-I9300 using xda app-developers app
Flash problems
I've had installs stick at the boot animation or shortly thereafter several times. Usually it's because of a dumb mistake. The only thing that's consistently worked for me is flashing back to stock VZ firmware via Odin and doing the whole process over from root through installation. It sucks but it always works.
Howdy.
I've just flashed CyanogenMod 10.1 - 20130315 to my droid 4 with Safestrap, and I haven't been able to boot into it; the cyanogenmod splash screen with the rotating wheel graphic shows up, but it spins for upwards of 40 minutes without doing anything.
I followed the guide on the cyanogenmod wiki for the droid 4 device. The forum won't let me post a link to it.
Before I installed I wiped / factory reset, and after install I wiped cache/dalvik; still no dice. I've tried doing the same process several times (even wiking the system before trying to reflash), but the same result has always occurred: ever unhelpful eternal wheel...
I'm a bit at my wits end; I haven't been able to find any other information about this that wasn't solved by wiping cache / dalvik, so I turn to y'all for help.
Same here
I installed Cyanogenmod 10.1 with CWM the link:[Recovery/Bootstrap][5-sep-2012] CWM Touch recovery v6.0.1.1 - xda-developers and i went ahead and installed the mod: cm-10.1-20130211 all went fine untill i noticed that my camera is not working (not a big deal) but then i noticed that my phone only saw 488MB out of my 32GB this was un acceptable after i found how to connect my phone to my pc so it showed up as a storage device do that i copied the same mob but a different version (cm-10.1-20130129_v2) so i went ahead and booted into Android system recovery <3e> and i did a factory reset and then i said oh f*** i need CWMR to install the thing so i just waited for it to do its thing and then reboted the device thinking after i boot up i will reinstall CWMR but i was never able to boot because im stuck on the boot animation. Been waiting for +20min or so and nothing please help me what can i do this is my only phone please help
help with CM10.1 ROM issue
Hi folks,
this is my first post on XDA. I have a Sprint htc EVO 4G LTE phone which was running on JB.
Thought of root and flash with CM. So, first I unlocked the bootloader using htc dev and installed TWRP custom recovery and then rooted.
Then I flashed the stable CM 10 then flashed gapps which is compatible for CM 10 version. so far so good. oh, btw I did nandroid backup before flash and also wiped to factory reset, cache and Delvic cache.
After the flash i clicked on reboot system and I see the Cyanogenmod boot, but its stuck at that stage and I waited for more than an hour. No luck.
Thank god I did back up before this, otherwise not sure what I'm gonna do.
But, could someone tell me why it gets stuck at this point. I know some of you guys had this problem. I searched everywhere but didn't get help. I thought of posting this in android development forum, but as a newbie I can't do that.
Please help me out.
P.S: when I'm on boot screen (power button + vol down button) I see unlocked at the top but I also have TAMPERED in red color on top of that. Was this normal? or do you think that is causing the problem? and what should I do now?
(First of all I am not an expert)
It happens sometimes about 1/10 of every flashes I did with cm10
It might because some files didn't get copied or got corrupted.
Just try this method
Format data
Format system
Format cache
Wipe dalvick cache and factory reset
Now flash the ROM
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
---------- Post added at 11:35 PM ---------- Previous post was at 11:27 PM ----------
(First of all I am not an expert)
First wipe every thing(system,data,cache,dalvick,android secure....)
Now install ROM,
Wait don't install gapps
Now find an extended cm10.1 kernel or lupus kernel(or such kernels) for your device and flash it via pc
I prefer flashing kernel after installing the rom
Hit thanks if I helped
Sent from my WT19i using xda app-developers app
NEED HELP Cm9
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Ask in the Xperia X10 mini forums.
Three-finger salute
Ran into this situation today when I tried to restore a backup and I couldn't get past the CM10 logo on bootup. Holding down all three buttons, power, volume up and down, got me back to the Clockworkmod boot screen.
ETA: Sorry, posted in wrong forum. My situation pertained to a Samsung Galaxy 5 Media Player.
neso97 said:
OK so i have xperia x10 mini i have root long time so i decided since there is no update from 2.1 that am gona manualy put new software.I watched youtube video on how to do cyanogenmod 9 so i did everything(flash,bootloader....) and after all that the screen started and i got stuck on that blue screen i tried to turn phone off that didnt work i can only restart the phone and when i plug in it doesnt say anything i cant open sd card or anything its just stuck like that pls help.SORRY FOR MY ENGLISH
Click to expand...
Click to collapse
Hi...i just happened to flash my x10 mini to cm9-robyn yesterday...same thing happpened to me...boot the animation until run of battery....i accidently booted it to recovery and just leave it...fortunately after sometime it booted by itself and run as normal. The cm9 run ok except the wifi is not working. Hope that will help. I am not an expert.
Related
I am noob to ROMS . First time flashed CM9 using ROM manager and selected backup data. after Installing Rom phone restarted and stuck on screen displaying "INSERT COIN" and options are given like
PHONE
GAMING
BROWSING
PRODUCTIVITY
ANYTHING.
Arrow is stuck on ANYTHING. and Volume buttons and hard reboot isn't working. I pulled battery off and restarted it but still stuck on same screen. Tried it many times. Any help would be appreciated .
which CM9 ROM did you flash? Can you provide a link? Usually I prefer to use CWM Recovery to flash ROMs.
Thank you for reply!!
I solved the problem, I was using wrong cm9 zip.. restored the backup and flashed the correct one. Now It's All good now, enjoy galaxyS3 addon. But it's full of bugs right now I must say. Hoping for a quick update.
same problem
hi im having the same problem which is got stuck on "insert coin!" screen..running CWM v5.0..htc evo 3d..im trying to install jelly bean ROM from here http://forum.xda-developers.com/showthread.php?t=1764323
i had tried to factory reset by holding volume down and power button..but after i select factory reset and "backup and restore" it got stuck..and if i pushh power button it goes back to previous menu..
please anyone help me..i don't know what to do right now..
Hi guys,
Really sorry to ask about this but tearing my hair out!
I have a P6200 UK model. I installed CWM v6.0.1.0 and it worked fine. The intention was to install Galaxy ROM HD (build #06), so I downloaded it, put it on my SD card, and installed from CWM recovery. The install got stuck on "Flashing boot" - so after around 15 mins I reset it.
It went into a boot loop on the initial Samsung logo. Luckily I'd previously re-flashed stock HC with Odin (to cure a dead Wifi problem caused by, I think, an errant install of Busybox) so I did this again, rebooted, and the system came up, text started scrolling up the screen, followed by a red error message (see picture) and a reboot. I was then once again stuck on the initial Samsung Tab 7.0 Plus log. I repeated the process and it didn't even get past the Samsung logo.
So I thought I'd try the newly released ICS Rom (GT-P6200_ATO_P6200XXLQ1_P6200OXALQ1) - this seemed to install OK, then half booted, did some text type installation stuff with the blue Android, then rebooted again, finally getting stuck on the Samsung logo with blue pulsating behind it. It never gets any further than that.
I tried flashing HC back - same result as earlier. I can also reflash CWM and sometimes it works, sometimes it doesn't. It seems I've run out of options.
So - question is - where (if anywhere!) can I go from here?
Help greatly appreciated, many thanks!
have you tried a system wipe in cwm? if not do a system wipe and reflash HC using odin.. same thing happen to me 2 days ago.. I think something is up with HD rom
hi my name is dinesh
It happened day before yesterday
I was having jelly sandwich os on my xperia neo all was great but I thought of making the os still good by removing apex lancher for apex alncher pro
But was not able to do that , so I googled and found the way to remove it via titanium back up,
After that the phone was not booting,
So I recovered using recovery.img using fast boot and installed the ROM
Deleted cauche and devik cauche
Insatlled the jelly sandwich again
but this time the mobile network was not working so I reinstalled it still the same issue, so I moved to beautiful hd Rom and instaled it but the sound was very low so I installed the acid patch but the phone was not booting again
so I installed the fastboot recovery image and reinstalled rom after performing cleaning
1,wipe cauche
2.devik cauhe
3.formate system in the same advance option in recovery
Installed the ultimate beautifull hd rom
But as soon as the os loaded the phone got hanged, and was not booting after the sony screen
so I fast booted again.. but this time even after using the same recoveryneo.img for fastboot recovery in download mode(pressing menu key while connecting to usb)
I was able to flash the recovery image but the recovery was not showing up in the phone it stays blank
When I flashed the kernal same thing that is rebooting after sony screen happens
Kindly help me on this
1,reboot my phone to recovery
2, any other way to do the repair with any softwares
3.is there any other recovery image like clokworkmod for my phone (is there a amon ra version)
Phone: SE xperia neo
Kernal used – suave 6 (since it supports 2 way call recording) from the very begining
I am completely stuck
please , anything please tell me
dineshthephoenix said:
hi my name is dinesh
It happened day before yesterday
I was having jelly sandwich os on my xperia neo all was great but I thought of making the os still good by removinh apex lancher for apex alncher pro
But was not able to do that , so I googled and found the way to remove it via titanium back up,
After that the phone was not booting,
So I recovered using recovery.img using fast boot and installed the ROM
Deleted cauche and devik cauche
Insatlled the jelly sandwich again
but this time the mobile network was not working so I reinstalled it still the same issue, so I moved to beautiful hd Rom and instaled it but the sound was very low so I installed the acid patch but the phone was not booting again
so I installed the fastboot recovery image and reinstalled rom after performing cleaning
1,wipe cauche
2.devik cauhe
3.formate system in the same advance option in recovery
Installed the ultimate beautifull hd rom
But as soon as the os loaded the phone got hanged, and was not booting after the sony screen
so I fast booted again.. but this time even after using the same recoveryneo.img for fastboot recovery in download mode(pressing menu key while connecting to usb)
I was able to flash the recovery image but the recovery was not showing up in the phone it stays blank
When I flashed the kernal same thing that is rebooting after sony screen happens
Kindly help me on this
1,reboot my phone to recovery
2, any other way to do the repair with any phone
Phone: SE xperia neo
Kernal used – suave 6 (since it supports 2 way call recording) from the very begining
I am completely stuck
Click to expand...
Click to collapse
guys please anyone
dineshthephoenix said:
guys please anyone
Click to expand...
Click to collapse
Why would you bump your own thread after only 3 hours? Forum rules require 24 hours between bumps.
TeeJay3800 said:
Why would you bump your own thread after only 3 hours? Forum rules require 24 hours between bumps.
Click to expand...
Click to collapse
thanks teejay
the problem was the cauche memory dumps and i cleared it with the fast boot mode
fastboot -w
and reflashed the recovery image and installed the ROM again:good:
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
khafaga said:
Hi guys,
My tablet suddenly went crazy since i installed Cm 10.1 , used to crash everywhile till yesterday where it crashed if failed to boot the room where only it gets stuck at the M motorola Logo screen, i decided im going to reflash the rom with its compatible Gapps thats when i faced another problem where my Rogue xm Recovery cant mount either cache or sdcard or internal memory, i kept restarting recovery but with no hope , till i found out i have to open recovery and wait like 3-5 mins till recovery can read device memory-internal memory, cache etc- - LIKE DEVICE WENT TOO SLOW- , i reflashed the rom but again doesnt boot, tried another EOS rom with its Gapps but also same result stuck at motorola boot screen - I FLASH LIKE A PRO wiping everything before flashing- i tried to flash another recovery TWRP but it couldnt read internal sdcard although its modded for that. Please give me some clues this tablet carries sweet memories of 2+ years :/
Click to expand...
Click to collapse
hi please let me know if you got xoom fixed ?
I have similar issue after installing CM10.1 , tablet stucked on boot logo and because none of my volume buttons work I have no idea how to fix is ! ?
have this tablet for 3 years , it's a lot of stuff there
(backstory) Hi, ive had an Asus TF300T, for about 3 years now, unlocked, rooted it pretty early on... cycled between cyanogenmod and omnirom quite a bit, without really any major issues. Until today, i was running Cyanogenmods latest nightly build (CM11 Nov 5 2014), it worked just as any other nightly does a few bugs here and there, but nothing major and i hadn't done any major flashing or modding to the device. On my home from university, I turned my tablet off. And when i got home i plugged in the charger, and just as always the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.5
I had TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Edit: I dont know why, but when i try using fastboot or adb, the device isnt recognized. It doesnt show up on device manager either. I dont know if its the cable cause i bought it new, it says its can sync data, or a faulty charge/sync port....
razr9622 said:
(backstory) the tablet turned on, showed the stock Asus screen, then changed to the Android boot animation... the animation then suddenly froze, and the device went into a boot loop... continuously... I dont know whats weong with it... tried to do a factory reset, i tried reinstalling the ROM, tried installing omnirom, but that got stuck on the OmniRom animation...
Im running Asus build 10.6.1.27.1 (I know that theres a newer version 10.6.1.27.5, but when i try to flash it, the recovery says error and fails)
I have TWRP v2.7.0.1 installed but have now no longer works
id really hope there is a solution for this!
Thanks!
Click to expand...
Click to collapse
^THIS!
I was just to open a similar thread, then i saw your post. I join your request for help!
A month ago i have done a favor to a friend by unlocking his tf300t and installing CM11 on it. A few days ago he comes to me with this problem. I've tried anything but still no success:
- restore a backup done before flashing CM11 --> restore ends correctly but the problem remains
- flash a rom (CM11 and OmniRom) --> flash ends correctly but the problem remains
- flash the stock firmware found on asus website (WW_epad-user-10.6.1.27.5.zip, the SKU is correct for my version) --> the flash process stuck (i had to force restart the tablet after almost 2 hours of "flashing")
Since the boot animation changes according to the rom, i suppose the flashing process works. But the problem remains: after a few seconds the animation freeze and the device restarts, in loop.
Informations on the system:
- build 10.6.1.27.5
- TWRP v2.7.0.1 (working!)
- adb works (i managed to set /data as rw and push the .zip file to flash)
- fastboot should work
Please help! I feel a bit responsible for bricking my friend's device
SOLVED!
Finally!
I had already tried this method, before requesting for help, but the first time didn't worked... I don't know why this evening the tablet decided to collaborate:
http://forum.xda-developers.com/showpost.php?p=44244313&postcount=12
That worked for me! :victory: