Database Info

Help, I am stuck in CWM meni

Hi, I have problem with my A510. The situation right now is that i am stuck in CWM menu. I mean, i can let the system to boot up, but as soon i see the desktop it freezes and reboot. And then over and over again.
I have cynogenmod version 10.1.2 with android 4.2.2. As I said a few weeks it was ok, but now suddenly system had stopped.
Is there any solution. Of course i can't get adb commands to work.
I tried to flash another ROM, but no luck. It says update successfully installed but, when i restart i still have old cyanogenmod installed. I don't understand this...:crying:

Anyone?
I think there must be a solution for this. Please help!

[Q] Need help galaxy s2 i9100 boot loop and freezing

Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode

migimantas said:
Hello I am searching for help. The problem is that my galaxy s2 i9100 stopped working properly. It started like this maybe I took out the battery or something I don't remember and then I turned it on the phone wouldn't boot. I thought maybe my android operation system got bricked so I decided to re flash it but as I can remember the phone wouldn't go in to download mode but some how I managed to reflash the firmware but then phone booted it just froze and then I pressed lock button the phone screen would go black and reboot. After installing cyanogen mode 11 the phone would boot and it could be used again until pressed the lock button it would go black and reboot so I have been reading forums and found problems like boot loop corrupted mmc or something else corrupted and I don't know what the real problem is because the symptoms are like boot loop or corrupted mmc or soft brick. I have already tried other kernels other android versions clock work mode
Click to expand...
Click to collapse
I have found that my emmc has the insane chip bug. The phone boots normally with cyanogen mode 11 but then it goes to sleep mode or I press the power button the screen goes black and the phone restarts. I have tried siyah kernel to try dual boot but then I flash siyah I cant get into recovery.

I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...

twinsen.net said:
I think you should flash latest STOCK ROM with Odin, and then follow available custom rom instructions on xda...
Test if the stock rom will work for you, boot your phone etc... Try to use it a few days. If everything is OK, proceed with
further procedures...
Click to expand...
Click to collapse
I have already tried this but with the stock rom phone boots but at the section where I have to chose language I jus freezes stops working

So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.

twinsen.net said:
So I think it is a hardware problem. Phone on stock rom shouldn't freeze on language selection. Something is wrong. If you are on warranty, let them fix it for you, if you are not, try to fix it in some phone repair point. I'm sure you can stop your attempts. It will not be better for now.
Click to expand...
Click to collapse
Take it straight away to the official service centre

[Q] "working phone", but black screen after the boot logo

Hello guys,
some days ago my phone was permantly booting up in the recovery mode nothing else was possible. As I was on road and couldn't access internet anywhere I just tried to do some wipes, which then made my phone not show anything. I guess the reason that it didn't boot up anymore was that the battery was fully drained. When I was finally back home I was able to charge my phone but then the following happend:
I can start my OPO, see the android logo and then it turns black, but it fully boots up. I mean I can even click the touchscreen and hear some touch reactions/sounds. Also I'm able to turn up/down the volume and hear my phone. Furthermore I'm also able to do the "V-gesture" to turn on the flashlight. When I boot up into fastboot mode I also see the message "fastboot mode" + the little cyanogen face.
All in all everything seems to work, aside that I dont see anything else than dark after the logo.
I tried flashing new roms, stock reset, like seriously anything, but I can't get my phone to work probably again.
Does that mean that my phone got some hardware problems, maybe the touchscreen?
Help is appreciated, thanks in advance!
btw: English isn't my first language, so please excuse any mistakes.

You'll have to try flashing completely stock CM11 rom or CM12 rom, img by img in fastboot..modem, boot, system etc. I helped a friend who had this kind of problem. Probably not the cleanest way, but at least it works.

Already did that 3times using different methods. Stock CM11, CM12 and colorOS

I have a similar problem, did you manage to fix it? And if so, how?
Thanks,
Capelare.

No longer able to boot into recovery mode after flashing LineageOS

Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?

AMpageg2 said:
Hi all, have a rooted OPO that was running ExodusOS. I decided to try a flash of Lineage and so booted into recovery, backed everything up, flashed it. Everything seemed to go okay but after the boot logo the screen just goes black and stays that way until it gets shut back off. I went back to TWRP, loaded my backup and all seemed well as I was still able to use my old backup just as normal. Well, I tried reflashing Lineage from TWRP again and I still get the same black screen issue. This time, however, the phone will neither boot into Fastboot nor into recovery mode and just goes straight into loading Lineage. Because of this I am left with a soft brick until I can get this straightened out. I tried connecting the phone to my PC but it is not detected as a device. I only need to boot into my backup one more time so that I can back everything up, so even if it's only a temporary fix, I'm okay with that too. Any suggestions?
Click to expand...
Click to collapse
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851

Sounds like a Hardware issue? Sorry to say what your saying doesn't add up and or make sense. Fastboot should work no matter what even if you soft brick it and mess up recovery. I suggest letting the power fully drain maybe and google how to fast boot in case you are doing it wrong.

Mr.Ak said:
https://forum.xda-developers.com/oneplus-one/general/tool-oneplusrecovery-tool-v1-0-restore-t2991851
Click to expand...
Click to collapse
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.

AMpageg2 said:
I've tried that but it can't find the phone. The phone gets detected as a new device in windows as evident from the device connection sound but it also never shows up in the list of devices from My Computer.
Click to expand...
Click to collapse
I agree with what @Shinobi_warrior said.Seems like you just have a soft brick,so you should be able to boot into fastboot mode without any issues.Are you sure you're doing it the right way? Did you try draining battery completely and then booting into fastboot(yes,you don't need much battery to boot into fastboot mode)?

Well I was finally able to get the device detected by ADB, but it just shows as offline. I attempted to use the repair kit and nothing seemed to happen. I also attempted a different tool (https://forum.xda-developers.com/on.../oneplus-one-toolkit-manudroid19-gui-t2807418) and then booting into either fastboot or recovery that way, a terminal window pops up and quickly disappears, and then nothing else happens. I still see the TugaPower boot logo and it still goes to the blank black screen after this.

[Fixed] Messed up hard, require assistance regarding bricked phone

----FIXED----- dunno how to delete posts
---- did specific combination of keys = power+vol_up till the screen turns black, power+vol_down after that, and all keys together till recovery mode boots up. Took me quite a bit of tries, reseted to stock and went on with flashing again from there ----
Hello all,
So I'll start off from the beginning. I was updating my 3.6 Havoc custom OS to the latest 4.2 Havoc custom OS. I started off with making a backup, went on with the data reset, booted into TWRP and flashed the v4.2 img on slot B. And then I booted into the system instead of rebooting into recovery, without Magisk flashed. I feel like not having Magisk flashed is the real culprit here. Please enlighten me on this topic if I'm wrong.
So the problem is that I'm stuck in an endless "bootloader in unlocked", tried out the combinations of pressing P+V_UP and P+V_DOWN, tried out pressing all 3 (P, V_UP, V_DOWN) buttons at the same time, also ADB and fast boot are not detecting the device, so I have no way of entering TWRP again. Please please please help me in fixing this
I have read many articles trying to find a solution to my problem, and none seem to be an closely related to my problem, please guide me to the thread if it already exists. Im on a Mac OSX so MSMtool won't be any help of me.. I would really really apreciate an urgent reply.
Thanks in advance.