Related
I am planning to buy a MyTouch 4g slide to upgrade my aging Touch Pro. What is the procedure to unlock the phone to use on any network?
Any network meaning any GSM carrier correct? It wont work on verizon or sprint.
Sent from my Undeadk9's Senseless ROM using xda premium
Yes unlock to use on any GSM network. I need to use this phone on gsm networks in Asia.
I just got mine unlock
here are your options from what I learned..
1. get it unlock through T-Mobile, if you have service with them. But there is no guarentee they will proivde an unlock code.
2. Do what I did, I use the AT&T prepaid, bought the unlock code and unlocked it. There are a number of sites they do this a I researched and ran into a lot of bad reviews on the cheaper ones. I ended up using these guys below for $25 and I got the code emailed in 10 minutes... worfked great.
http://www.htcimeiunlock.com/
RTFF: http://forum.xda-developers.com/showpost.php?p=17033329&postcount=23
T-Mobile said they'd give me an unlock code, but I had to wait 30 days...**** that.
Etn40ff, thanks for this link. It brought me to the guides I needed.
I'm trying to understand the process. I've done this over the years to so many phones, but its getting to be over my head, honestly.
I guess my next question is how to root this phone? I'll do a search for this.
Worked great for me, thanks
Go here. http://revolutionary.io/. Follow the directions. They have files for root as well. Make a clockwork mod back up after revolutionary. From h boot hit recovery then hit backups and restore. Make a backup could take up to ten mins fyi, if it looks like it froze it prob didn't.
Place zip files into sdd card. Reboot into recovery at the h boot select recovery. Next hit load file from sd card. Click yes. You're done reboot.
Make sure you have s off before you root via revolutionarys tool.
Hope that helps
Sent from my MyTouch 4G Slide using xda premium
Etn40ff said:
RTFF: http://forum.xda-developers.com/showpost.php?p=17033329&postcount=23
Click to expand...
Click to collapse
Method onne works for our phone too
Sent from my MyTouch 4G Slide using xda premium
Quick question, do I need to be s-off to use this phone on At&t, have a att sim already, already rooted, s-on, hboot 1.45.0013, tried method 1 from here http://forum.xda-developers.com/show....php?t=1232107, got unlock code, but no data and it keeps asking for unlock code even though it said network unlock successful
Try it again when unlock code shows up. I did the method 1 on the 1st day I got my MT4GS and had no problems whatsoever till now. And I'm using it on our country's sim card eversince.
Just remember, on AT&T you will be limited to EDGE data speeds.
Mine worked fine. I used MikTouch, but any stock based firmware will work. Borrowed my co-workers SIM card, entered the code, and proceeded to use the AT&T phone service. Make certain you put in the correct APNs.
S off doesn't matter. In fact this is the same process you would use if you contacted t-mobile for the unlock code. It should work with a fully locked up phone as well as rooted and s-off. Stock based Rom is key. Bullet proof, MikTouch, or stock will work fine.
Hastily spouted for your befuddlement
Any ROM whether ICS or GB should work with the unlock method since whatever rom you flash doesn't mess with the partition table mmcblk0p6. So the issue is not ROM dependent. Have you tried with another sim card/any other networks?
Riyal said:
Any ROM whether ICS or GB should work with the unlock method since whatever rom you flash doesn't mess with the partition table mmcblk0p6. So the issue is not ROM dependent. Have you tried with another sim card/any other networks?
Click to expand...
Click to collapse
It needs to be done on a stock Sense ROM. CyanogenMod mod will not allow for a unlock code to be entered.
Sent from a KangBanged JellyBean
OK, I am on cm9 I will flash miktouch and try it, don't have another sim to try, trying to unlock it for a family member since I just got my galaxy s3, will write back and let you know how it goes
Sent from my SCH-I535 using xda app-developers app
koraun said:
OK, I am on cm9 I will flash miktouch and try it, don't have another sim to try, trying to unlock it for a family member since I just got my galaxy s3, will write back and let you know how it goes
Sent from my SCH-I535 using xda app-developers app
Click to expand...
Click to collapse
/
and i'm guessing I can just google for At&t's correct APNs?
koraun said:
/
and i'm guessing I can just google for At&t's correct APNs?
Click to expand...
Click to collapse
Yeah buddy
Sent from a KangBanged JellyBean
strapped365 said:
It needs to be done on a stock Sense ROM. CyanogenMod mod will not allow for a unlock code to be entered.
Sent from a KangBanged JellyBean
Click to expand...
Click to collapse
Ahh yes never though of that Retrieving the unlock code was the only thing on my mind.
Riyal said:
Ahh yes never though of that Retrieving the unlock code was the only thing on my mind.
Click to expand...
Click to collapse
ok, tried miktouch, wont get past splash sceen, no links for bulletproof are up, any ideas?
you mentioned you're currently on CM9 and on 1st post you said you were S-ON so flashing kernels is not possible through recovery. 1st flash MikTouch then next is extract boot.img on the rom and flash it using fastboot. You managed to flash CM9 on it then just do the steps again on miktouch.
koraun said:
ok, tried miktouch, wont get past splash sceen, no links for bulletproof are up, any ideas?
Click to expand...
Click to collapse
First I've heard of this in MONTHS. So it's definitely user created. MikTouch is bone stock HTC optimized
Sent from a KangBanged JellyBean
Read all of the post and the one bellow it from cschmitt before you do anything. This also might be illegal in the USA if you bought your phone after 1/26/2013
The last few days it's been going around unlocking the note II and gs3 with some settings(http://forum.xda-developers.com/showpost.php?p=34661189). Well the good news is the method can be used on our phones! I don't know what modems work I know two that don't. I was able to use the T989 modem (Tmo_SGH-T989_UVLE1_radio.zip)to unlock my phone but others have reported UCLD2 (a skyrocket modem) works as well. after I unlocked I switched back to UCLI3 and the phone is still unlocked.
You'll need to be on a stock(or stock based) rom and you should make sure the number matches the text next to it. All you need to do is touch the row to select it. I did these steps with a O2 sim card in my phone. after the reboot your phone might take a second but it should connect to the network and be happy with your non att sim.
I have not tested this on a rogers phone. It might work it might make your phone explode in your hand and kill you. For all I know it could do the same for other ATT phones.
f_v_man said:
Go to dailer screen. press *#197328640#.
press [1]DEBUG SCREEN
Press [8]PHONE CONTROL
Press [5] SIMULATION
Press [6] NETWORK LOCK
Press [3] PERSO SHA256 OFF
Wait exactly 30 seconds
press the menu key on the phone and select back option. This will take you back to NETWORK LOCK screen.
Press [4] NW LOCK NV DATA INITIALLIZ
Wait exactly one minute and reboot the phone.
Should be unlocked.
Click to expand...
Click to collapse
Confirmed, this method works to network unlock using stock UCLD2 rom and modems (the April 15th ICS 4.0.3 leak.) Links to the CWM-flashable stock ROM and modems can be found below. Unlock was performed on an AT&T locked SGH-I727 using a TMO SIM card.
This method is modem specific, as the service mode commands vary by modem. It does NOT work with UCLA3, UCLE2, or UCLF6 modems (NV initialize menu item is not present, or non-functional.)
Note: After 'Press [4] NW LOCK NV DATA INITIALLIZ' step the phone reports ' PERSO_NV_INIT is SUCCESSFUL', then it's safe to reboot.
Confirmed that IMEI is intact following network unlock, and that unlock persists following a ROM/modem flash (back to CM-10.0.0 and UCFL6 modems.)
Awesome find, my friend!
Links to CWM flashable zips:
UCLD2 modems: here
UCLD2 OEM Stock, rooted: here
kool, i added this thread to the sticky, even though its cheap to buy an unlock code for rogers(i paid under $8 from ebay), for att users its more expensive
Hi, I'm stock ICS on ATT, if I just flash the new modem will that make any difference on my ATT service? Like not get HSPA+ service. I am currently out of the country so I can't test it with my ATT sim. (had my phone line suspended)
Also using a SIM from the Philippines... Will the type of SIM card make any difference?
Sent from my SAMSUNG-SGH-I727 using xda premium
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3. Thanks!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
kchen96 said:
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3. Thanks!
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
no, flash the files cschmitt posted
UCLD2 modems: here
UCLD2 OEM Stock, rooted: here
Click to expand...
Click to collapse
kchen96 said:
Let me get this straight. A STOCK rom like embryo? Or back to actual stock... I'm in slim bean 3.1. And then I have to flash a new modem? Current UCLI3.
Click to expand...
Click to collapse
First, a stock (or stock-based) ROM must be installed. Specifically, one that includes Samsung's serviceModeApp.apk in /system/app. This is required to support the *#197328640# dialer code that brings up the modem's service menu. ROM's such as CM9/CM10/AOKP/AOSP won't work for this because they don't have the service mode interface.
Second, a modem that supports the '[4] NW LOCK NV DATA INITIALIZE' command is required. The service mode menu items that are displayed and available are a function of the modem, not the ROM-- so only specific modems can be used to unlock with this method. So far it's confirmed that T-Mobile's UVLE1 and AT&T's UCLD2 have what it takes.
Just perform a nandroid backup of the current setup, flash an appropriate ROM and modem, factory reset, reboot, perform the network unlock, reboot, verify it's success with a non-accepted SIM, then restore the nandroid backup and re-flash the previous modem.
lart2150 said:
The last few days it's been going around unlocking the note II and gs3 with some settings(http://forum.xda-developers.com/showpost.php?p=34661189). Well the good news is the method can be used on our phones! I don't know what modems work I know two that don't. I was able to use the T989 modem (Tmo_SGH-T989_UVLE1_radio.zip)to unlock my phone. after I unlocked I switched back to UCLI3 and the phone is still unlocked.
You'll need to be on a stock rom and you should make sure the number matches the text next to it. All you need to do is touch the row to select it. I did these steps with a O2 sim card in my phone. after the reboot your phone might take a second but it should connect to the network and be happy with your non att sim.
I have not tested this on a rogers phone. It might work it might make your phone explode in your hand and kill you. For all I know it could do the same for other ATT phones.
Click to expand...
Click to collapse
Great job on the research buddy working fabulous on my all my rockets 3 to be exact lol although i am a person who doesnt mind paying its always awesome to have a free method
Awesomeness. I paid to unlock my old SR but I returned it due to battery issues (long story.) Being able to unlock my new phone and force 2G networks in CM10 would be awesome. I'll try this when I get home.
Tried it with the UCLD2 modem/rom and idk if it worked... Tried twice. Both times this happened. Wiped again re flashed. Same result.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
worked for me... does the unlock "stick" even if i change roms/radios?
norazi said:
worked for me... does the unlock "stick" even if i change roms/radios?
Click to expand...
Click to collapse
yeah it does
kchen96 said:
Tried it with the UCLD2 modem/rom and idk if it worked... Tried twice. Both times this happened. Wiped again re flashed. Same result.
Sent from my SAMSUNG-SGH-I727 using Tapatalk 2
Click to expand...
Click to collapse
If you look at the OP he used ANOTHER sim card when doing all this. I think if you have an AT&T SIM in it doesn't work. I'm guessing that's it as I had an AT&T SIM in while I was doing it and it didn't work. Try a T-Mobile or other GSM sim and see what happens. I'll be doing that later.
Update: Apparently you do NOT need to have another SIM card in when you do this, as I was working on unlocking the phone with a T-Mobile card in and before I finished (I mean like I was on step 2) I got a T-mobile signal and was able to browse the web. Best advice I can give is when you reboot, make sure you wait for a good minute to see if the phone was unlocked, as you won't get a signal immediately even if it works.
WORKS ON ROGERS i727r
Just posting that I used the rom / modem posted in the 2nd post, and it worked great.
Thank you.
Worked like a dream.
Rocking a T-Mobile pre-paid SIM now.
Nice to have options.
Just did this about an hour ago it seemed to work c: recovered my backup and my service is fine. Gonna try on my brothers T-Mobile sim when I get home. Didn't flash another radio again though. Gonna try this one. I have constant text and call retrieving problems so yeah..
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
I would like to report that I was successful unlocking while using skyICS, I just flashed the modem from the second post
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Tested last night. Method confirmed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Smash2Bash said:
Tested last night. Method confirmed.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Click to expand...
Click to collapse
word of advice may want to block out your number!!!
Yeah I noticed that but was a random sim doesn't even work anymore.
Sent from my SAMSUNG-SGH-I727 using xda app-developers app
Just to be clear this may not be a permanent unlocking as I can't verify the results. (although I've had numerous times of restarting the phone and still good, but I am just repeating the developers words.)
All I know is that I have an i337 with the newly updated MF3 baseband, I tried everything and anything to get this guy unlocked since I am visiting overseas at the moment. I tried the 27663368378, the 0011, 9090 tricks and anything else you can think of, I even took it to one of the mobile service places and they were unable to even get an ack from the phone with it's new baseband. I tried downloading the "servicemode shortcut" from the play store and the only thing that app was able to tell me was that it only works with galaxy family (just as a reminder I have a galaxy s4!) I think whatever they had done, was even confusing the app, so it couldn't know its on a galaxy! anyways, after searching and searching I came across a link and conclusively an app called "RegionLock Away" by the chainfire group from the moment the app was installed it took 45 seconds for my phone to be unlocked up and registering to the network I am in right now.
As it's always been said, I don't take any responsibilities for anything that happens to your phone, as I believe they don't either, the only purpose for this thread was to inform some of the people like me that are willing to take the risk and enjoy the rewards or bear the pain if it succeeds or fails.
honestly, as I will myself when I get back in the states, consider donating to them or purchasing the app, since we need guys like these to save us in moments like these.
These are the links to the original postsI know, that one is for note 3, but worked on my i337 MF3)
http://forum.xda-developers.com/showthread.php?t=2471742
and
http://forum.xda-developers.com/showthread.php?t=2470551
they are different follow them both and read them both.
I hope this helps somebody!
has anyone tried this yet to see if it worked?
This isn't a SIM unlock. Just a region unlock. Research the difference
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Ends said:
This isn't a SIM unlock. Just a region unlock. Research the difference
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
This may be true, but there have been reports of this app sim unlocking the S4
Sent from my SAMSUNG-SGH-1337 using Tapatalk
It works!!
Thank you!
---------- Post added at 02:31 AM ---------- Previous post was at 02:27 AM ----------
It works!!
Thank you!
I confirm.
I used the app before on my AT&T S4 and it sure unlocked the sim
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Ends said:
This isn't a SIM unlock. Just a region unlock. Research the difference
Sent from my SAMSUNG-SGH-I337 using xda app-developers app
Click to expand...
Click to collapse
Give it a try b4 u make a statement. I tried it b4 and it worked.
I'm living in Romania, I bought an ATT S4 from USA and it was locked. I unlocked only the region with Region Lock Away and everything works. Maybe it helps someone.
Can confirm it works as well. It also seems to permanent. I've reflashed back to stock using ODIN and used Safestrap as well for GPE ROM and it stays "unlocked."
havent tried it yet, but thanks bro, you saved me 40-30 dollars!!
EDIT; just tried it. works perfectly!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
I figured out a trick this worked on both of my galaxy s4's they are the I337M Canadian model.
DISCLAIMER I am not responsable for your phone if you can't follow basic instructions do not attempt.
First put your phone back to the proper Firmware where you can access service mode. Once that's done download QPST make sure the phone is on RNDIS+DM+MODEM download the phoneutil.apk put it on your phone and install.
Once that is done make a backup of your NV MAKE SURE YOU DO THIS IT SAVES YOUR IMEI NUMBER.
After the phone is rebooted go in to service mode and clear your EFS once the EFS is clear get to SHA256 on turn it on once on go back and then turn it off you should get 116630
Go back to COMMON and MAKE a backup
After the phone reboots open QPST and RESTORE the NV you had just backed up.
Your phone is now unlocked I CAN CONFIRM THIS WORKS.
Sorry the instructions aren't very precise but like I said IF YOU HAVE NO CLUE WHAT I WAS TALKING ABOUT DO NOT ATTEMPT.
All files to download are here
http://forum.xda-developers.com/showthread.php?t=2324667
egolabbakhsh said:
Just to be clear this may not be a permanent unlocking as I can't verify the results. (although I've had numerous times of restarting the phone and still good, but I am just repeating the developers words.)
All I know is that I have an i337 with the newly updated MF3 baseband, I tried everything and anything to get this guy unlocked since I am visiting overseas at the moment. I tried the 27663368378, the 0011, 9090 tricks and anything else you can think of, I even took it to one of the mobile service places and they were unable to even get an ack from the phone with it's new baseband. I tried downloading the "servicemode shortcut" from the play store and the only thing that app was able to tell me was that it only works with galaxy family (just as a reminder I have a galaxy s4!) I think whatever they had done, was even confusing the app, so it couldn't know its on a galaxy! anyways, after searching and searching I came across a link and conclusively an app called "RegionLock Away" by the chainfire group from the moment the app was installed it took 45 seconds for my phone to be unlocked up and registering to the network I am in right now.
As it's always been said, I don't take any responsibilities for anything that happens to your phone, as I believe they don't either, the only purpose for this thread was to inform some of the people like me that are willing to take the risk and enjoy the rewards or bear the pain if it succeeds or fails.
honestly, as I will myself when I get back in the states, consider donating to them or purchasing the app, since we need guys like these to save us in moments like these.
These are the links to the original postsI know, that one is for note 3, but worked on my i337 MF3)
http://forum.xda-developers.com/showthread.php?t=2471742
and
http://forum.xda-developers.com/showthread.php?t=2470551
they are different follow them both and read them both.
I hope this helps somebody!
Click to expand...
Click to collapse
This works with AT&T MF3 stock rooted. Thanks a lot!!!!!
doubt
i can confirm this works, but now i have a custom boot, can i flash back to stock with tar files of mf3 and it ill remain unlocked? thx
Yeah it wouldn't work on Beanstalk 4.3.1 but I booted over to my touchwiz rom and it worked flawlessly. Put in my T-Mobile sim in and it.didn't ask me for an unlock code ;3 thank-you
Also I'm on mdl
Sent from my SGH-I337 using Tapatalk
It worked on my MF3! I was confused with all the different posts, so this is what I did:
1. Rooted device (I had already rooted to delete AT&T bloat)
2. Downloaded RegionLockAway-v1.3.apk
3. Installed App
4. Ran the app and said Reboot Later
5. Powered off phone
6. Took out my AT&T SIM and replaced it with a T-Mobile SIM
7. Turned on the device with no message about SIM unlock code!
ydenyse said:
It worked on my MF3! I was confused with all the different posts, so this is what I did:
1. Rooted device (I had already rooted to delete AT&T bloat)
2. Downloaded RegionLockAway-v1.3.apk
3. Installed App
4. Ran the app and said Reboot Later
5. Powered off phone
6. Took out my AT&T SIM and replaced it with a T-Mobile SIM
7. Turned on the device with no message about SIM unlock code!
Click to expand...
Click to collapse
Same for me, except I didn't even have may ATT Sim in. Followed the steps, put the tmobile Sim in and viola!
I did this to my MF3 device, had a successful unlock, I OTA'd to 4.3 and i'm still SIM unlocked, thanks!
Been unlocking phones with this app daily for like 2 months now. Can't go wrong with it. The MF3 root is ridiculously easy aswell
Sent from my LG-D801 using Tapatalk
Just to clarify, if you change modems, you will HAVE TO re-run the app, as it patches the modem, it is NOT a true unlock....so in theory Ends is right....still not bad, and it works, but changing modems will disable it....
---------- Post added at 08:37 AM ---------- Previous post was at 08:35 AM ----------
ydenyse said:
It worked on my MF3! I was confused with all the different posts, so this is what I did:
1. Rooted device (I had already rooted to delete AT&T bloat)
2. Downloaded RegionLockAway-v1.3.apk
3. Installed App
4. Ran the app and said Reboot Later
5. Powered off phone
6. Took out my AT&T SIM and replaced it with a T-Mobile SIM
7. Turned on the device with no message about SIM unlock code!
Click to expand...
Click to collapse
Change your modem and see what happens.
It will then ask again for a sim unlock....
Did anyone try this on other devices than Samsung?
Sent from my SAMSUNG-SGH-I317 using xda app-developers app
Hey guys,
So I've got KitKatDS on my MT4GS however I need to know how to unlock the phone to use my AT&T simcard, I remember doing something with the terminal to get the unlock code, along with putting a few digits into the phone to get the IMEI number however I don't know what I put in. Along with that, when attempting to search for a network provider the phone tells me that there's a network error. Somewhere on the original thread (http://forum.xda-developers.com/showthread.php?t=2551715) there was something about it however I didn't understand exactly how to do it, so if anyone could help out, give some steps that would be great!
Thanks, Conner
Conner_Itayi said:
Hey guys,
So I've got KitKatDS on my MT4GS however I need to know how to unlock the phone to use my AT&T simcard, I remember doing something with the terminal to get the unlock code, along with putting a few digits into the phone to get the IMEI number however I don't know what I put in. Along with that, when attempting to search for a network provider the phone tells me that there's a network error. Somewhere on the original thread (http://forum.xda-developers.com/showthread.php?t=2551715) there was something about it however I didn't understand exactly how to do it, so if anyone could help out, give some steps that would be great!
Thanks, Conner
Click to expand...
Click to collapse
Hi Conner,
This is a bit like what I had. Non-stock based ROM's (such as CyanogenMod) don't play nice with the unlock process. Normally when you boot up with the foreign SIM card in, it will ask for the unlock code before you can even get to the dialer.
To complete the unlock process, you must be on stock, or a stock based ROM. I used MikTouch (download link), and aside from the first boot taking forever (almost thought it was in bootloop), the process went smoothly. However, to use MikTouch, you will need to downgrade your recovery temporarily (or you will get an assert failure while flashing).
Hope this helps.
Thanks joel, I'll give it a try, any suggestions to what I should backdate to?
Sent from my MyTouch 4G Slide using XDA Free mobile app
Conner_Itayi said:
Thanks joel, I'll give it a try, any suggestions to what I should backdate to?
Sent from my MyTouch 4G Slide using XDA Free mobile app
Click to expand...
Click to collapse
Depending on your preference (whichever recovery you are used to, probably ClockWork) I would use either CWM 5.0.2.7 or TWRP 2.2.2.0
joel.maxuel said:
Depending on your preference (whichever recovery you are used to, probably ClockWork) I would use either CWM 5.0.2.7 or TWRP 2.2.2.0
Click to expand...
Click to collapse
Thanks, will try. I'll let you know what happens.:good:
New issue?
1.4 seems to help people with the 'network error' in 1.3 however when I load the new rom android continuously crashes and i have no way to access the phone apart from the cyanogen start screen and the crash notification.
Conner_Itayi said:
1.4 seems to help people with the 'network error' in 1.3 however when I load the new rom android continuously crashes and i have no way to access the phone apart from the cyanogen start screen and the crash notification.
Click to expand...
Click to collapse
Might have been a bad download. Try downloading again, then factory reset (data, cache, dalvik) before flashing again. Hopefully that's all is needed.