Database Info

Unable to SMS/Text after Undergoround WM6

I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G

noone seen this? can someone point me in the right direction?

anyone anyone, Bueller.....bueller.....

Did you setup your GPRS connections and all? These don't come setup with Underground and MBE. There is info in the various WM6 threads on setting this up (and even some cabs floating around for some of the providers). I have Cingular and I just went to their website and found info to do this.

GuardianZX9 said:
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
Click to expand...
Click to collapse
I have the same problem. There is a workaround though - if you tap and hold the 'To' field in the message, there is a 'Send' option. That one works for me.
Andrew

just flash Radio 2.19.11

i use T-mobile. i use regular T-Mobile GPRS for internet and i also made a new internet connection call T-Mobile MMS
setting similiar below
T-Mobile MMS Settings:
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile MMS.
Enter PictureMessaging in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter PictureMessaging in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile MMS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
Click to expand...
Click to collapse
http://www.pocketpcaddict.com/forum...obile-mda-windows-mobile-5-phone-edition.html
and try switch around 216.155.165.050 to 216.155.165.50

Text messages
For SMS issues, try setting the Voice mail and Text message setting manually (Phone/Menu/Options/Services).Normally the network default settings work, but at times you may have to input the message center no. manually. Just call and ask your service provider for the message center number.
Radio ROM can be an issue at some locations- Try using 2.19.11 as suggested by J.

I have the same issue, I can send text fine, I can receive MMS, but I cant send MMS,
I have the settings just as posted above, and it doesn't work,

tmobile mms settings

WM6 - WIZA300 - NBD 7.4
i know how to edit. . .
1. Tap Start again.
2. Tap Messaging.
3. Tap Menu.
4. Tap MMS Configuration.
5. Tap the Servers tab.
6. Tap New.
7. Enter PictureMessaging in the Server Name field.
8. Enter 216.155.165.050 in the Gateway field.
9. Enter 8080 in the Port number field.
10. Enter http://216.155.174.84/servlets/mms in the Server address field.
11. Tap to select T-Mobile GPRS from the Connect via drop down list.
12. Tap to select WAP 2.0 from the WAP Version dropdown.
13. Tap OK.
14. Scroll to PictureMessaging and tap Set As Default.
15. Tap OK.
but i do not get the option of T-Mobile GPRS when i look at the drop-down box. Its just "Work, Internet, My ISP" etc...

Did you renames "My ISP" to "T-Mobile GPRS" when you set up the connection? Also, on #8 above, I believe that should be .50 not .050. Hope this helps.

ok, i added the connection, but it wants an access point name....
i dont have a dataplan, i just want to send MMS.

in need hw6955 english rom
in need hw6955 english rom

Cab For Cingular mMode Internet Settings

Hi,
I know there are cabs available for storing and reinstalling cingular MMS settings -- particularly useful - for those of us who are getting infected with frequent flash and reflashing - at least, it saves time from having to enter those settings all over again.
I am on the old ATT legacy plan that still uses mMode connections. I want to be able to save these settings in a cab or other format so that I can store it on my SD card and restore it whenever I flash and reflash my system.
How do you make such cabs?
rgds, MannyNoela

Please search next time.

Moderator -- thanks very much. I searched using the "mMode" as search term (since the mMode settings are slightly different from the regular ATT settings).
Anyhow, I installed the cab but it didn't work. As indicated, those of us on ATT Legacy (old) plans do not use the MediaNet different settings, but instead use the mMode settings, which are outlined below. I will like to write these as cab file, and would appreciate any help necessary in doing so.
Internet Connection Settings for ATT Legacy (mMode) Plans
Tap Start.
Tap Settings.
Tap the Connections tab.
Tap the Connections icon.
Tap the Tasks tab.
Tap Edit my proxy server.
Verify settings:
Check "This network connects to the Internet."
Check "this network uses a proxy server to connect to the Internet".
Proxy Server: 10.250.250.54
Click Advanced.
Verify settings:
HTTP Server: 10.250.250.54 port: 8080
WAP Server: 10.250.250.54 port: 8080
Secure WAP Server: Blank port: 9203
Socks Server: 127.0.0.1 port: 1080
Type: Socks 4
Tap OK twice.
Tap the Advanced tab.
Tap Select Networks.
Choose "GPRS Connection" from the dropdown bar.
Note: If "GPRS Connection" doesn't appear as an option:
Tap New.
Input "GPRS connection".
Tap the Proxy settings tab.
Input "10.250.250.54" in the Proxy server field.
Tap Ok.
Tap Ok twice.
rgds, MN
AllTheWay said:
Please search next time.
Click to expand...
Click to collapse

recieving picture messages

My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub

I think that it is the setting
se here : maybe there is a deference between the numbers and your server. ask your server for the correct numbers.
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: wap.voicestream.com
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 216.155.165.050
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 216.155.165.050:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +12063130004
12. Email center number is 500
13. MMS gateway address is 216.155.165.050:8080
14. MMS URL is http://216.155.174.84/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.

I have the same problem!!
dub08 said:
My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub
Click to expand...
Click to collapse
I was wondering did that solution that was given work for your phone cause it didn't for me. If it didn't work have your found out how to resolve the issue cause i haven't fixed mine yet.
thanks

Help Freaking Simplemobile

oky so i bought an unlocked captivate for my girlfriend last week and shes using Simple mobile as a service provider and we need the internet and MMS settings for the phone. also the phone is running stock att 2.1. thanks

You should trade with somebody who has a Vibrant, as Simple Mobile uses T-Mo 3G bands.
Plus, you know, they have their settings on their own website.

thanks everything is working expect that when she receive MMS they wont download any help with that?

http://simplemobile.wdsglobal.com/m...tworkId=&phoneId=3614&bearerId=&mobileNumber=
Setting up the data account
On the device, tap the Menu key.
Tap Settings > Wireless & networks > Mobile networks > Access Point Names.
Press the Menu key and select New APN.
Select Name, enter Simple MMS and tap OK.
Select APN, enter simple and tap OK.
Enter the Username and Password listed below. If no value is listed, leave the field blank.
Username:
Password:
Select MMSC, enter http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc and tap OK.
Select MMS proxy, enter 216.155.165.50 and tap OK.
Select MMS port, enter 8080 and tap OK.
Select APN type and tap MMS.
Select Authentication type, select PAP and tap OK.
Press the Menu key and select Save.