Unable to SMS/Text after Undergoround WM6 - 8125, K-JAM, P4300, MDA Vario ROM Development

I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G

noone seen this? can someone point me in the right direction?

anyone anyone, Bueller.....bueller.....

Did you setup your GPRS connections and all? These don't come setup with Underground and MBE. There is info in the various WM6 threads on setting this up (and even some cabs floating around for some of the providers). I have Cingular and I just went to their website and found info to do this.

GuardianZX9 said:
I am unable to send any SMS messages after the Underground Crossbow update, I get "Phone Not ready, Wait 15 Sec"
Any ideas? Thanks
G
Click to expand...
Click to collapse
I have the same problem. There is a workaround though - if you tap and hold the 'To' field in the message, there is a 'Send' option. That one works for me.
Andrew

just flash Radio 2.19.11

i use T-mobile. i use regular T-Mobile GPRS for internet and i also made a new internet connection call T-Mobile MMS
setting similiar below
T-Mobile MMS Settings:
Setting up the data account
Tap Start.
Tap Settings.
Tap on the Connections tab.
Tap the Connections icon.
Tap Add a new modem connection under T-Mobile MMS.
Enter PictureMessaging in the Enter a name for the connection field.
Tap to select Cellular Line (GPRS) from the Select a modem drop down list.
Tap Next.
Enter wap.voicestream.com in the Access point name field.
Tap Next.
Tap Finish.
Setting up the MMS profile
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter PictureMessaging in the Server Name field.
Enter 216.155.165.050 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile MMS from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
Click to expand...
Click to collapse
http://www.pocketpcaddict.com/forum...obile-mda-windows-mobile-5-phone-edition.html
and try switch around 216.155.165.050 to 216.155.165.50

Text messages
For SMS issues, try setting the Voice mail and Text message setting manually (Phone/Menu/Options/Services).Normally the network default settings work, but at times you may have to input the message center no. manually. Just call and ask your service provider for the message center number.
Radio ROM can be an issue at some locations- Try using 2.19.11 as suggested by J.

I have the same issue, I can send text fine, I can receive MMS, but I cant send MMS,
I have the settings just as posted above, and it doesn't work,

Related

Problems with WM6 the real thing

I just updated to WM6 and everything is working fine except i cant connect to T-Mobile GPRS anymore, it will start to connect and then disconnect right away. Also my MMS and SMS messages arent sending, how can i fix this?
You have to remove a '0' from the IP Address of one of the servers - for example the IP address should be 192.56.12.34, but the settings make it 192.056.12.34. It it this extra '0' that breaks it. I can't remember exactly where this is but, Settings, Connections, Connections and then somewhere in My ISP I think
I am sure someone on here will correct me shortly.......
If the seaching on this Forum didn't suck so much you wouldn't have needed to post
Andy
yea but where to i go to change all that, i dont know much about this so please someone help.
killerkhatiby009 said:
I just updated to WM6 and everything is working fine except i cant connect to T-Mobile GPRS anymore, it will start to connect and then disconnect right away. Also my MMS and SMS messages arent sending, how can i fix this?
Click to expand...
Click to collapse
Try This Had The Same Problem:
For GPRS:
Start-Settings-Connections tab-Connections
Click Add A New Modem Connection, Under Enter A Name For The Connection Put In T-Mobile GPRS. Then For Select A Modem Click Cellular Line (GPRS). Click Next Then For Access Point Name Put wap.voicestream.com, then next again and then finish. And Now It Should Work.
For MMS:
Tap Start again.
Tap Messaging.
Tap Menu.
Tap MMS Configuration.
Tap the Servers tab.
Tap New.
Enter T-Mobile MMS in the Server Name field.
Enter 216.155.165.50 in the Gateway field.
Enter 8080 in the Port number field.
Enter http://216.155.174.84/servlets/mms in the Server address field.
Tap to select T-Mobile GPRS Or The Internet If T-Mobile GPRS Isnt For Selection from the Connect via drop down list.
Tap to select WAP 2.0 from the WAP Version dropdown.
Tap OK.
Scroll to PictureMessaging and tap Set As Default.
Tap OK.
MUST HAVE GPRS SET-UP FIRST IN ORDER TO DO THE MMS CONFIGURATION!

Palm Treo 750 internet settings for O2 (UK network)

I can not beg, borrow or steal O2 to get settings for my Palm Treo 750 (windows mobile 5) to get on the internet! It is unlocked. I have tried various wap and password settings that I have found from them and online.
I have called O2 tech support which is really unimpressive because it seems they simply will not let you go up the ladder of support to get to someone that can answer the problem. I have been on palm.com website using online live support and palm says O2 must give the settings. O2 curiously tells me Palm must give me the settings. Anyone have any experience with this and know the settings? Know where to look? Me like you long time if you can help out.
thanks
I can give you my setting and it is not O2
You can ask O2 for the right setting.
and here it is:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
Well, I hope it will help you...

treo 750 mms/wap?

hallo i am from greece!!! i dont know how to activate mms/wap i dont understand i have q if you know somethink tell me please!!! i have Q card its is the same company with wind
Sorry about my english!!!
here is a guide to my server .
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
libal said:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
Click to expand...
Click to collapse
thank you!!!!! you are the best
it doesn't work!!! i dont know why
ATT MMS
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
there is option to install palm sms software
shaunehannen said:
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
Click to expand...
Click to collapse
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4

recieving picture messages

My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub
I think that it is the setting
se here : maybe there is a deference between the numbers and your server. ask your server for the correct numbers.
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: wap.voicestream.com
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 216.155.165.050
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 216.155.165.050:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +12063130004
12. Email center number is 500
13. MMS gateway address is 216.155.165.050:8080
14. MMS URL is http://216.155.174.84/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
I have the same problem!!
dub08 said:
My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub
Click to expand...
Click to collapse
I was wondering did that solution that was given work for your phone cause it didn't for me. If it didn't work have your found out how to resolve the issue cause i haven't fixed mine yet.
thanks

Help Freaking Simplemobile

oky so i bought an unlocked captivate for my girlfriend last week and shes using Simple mobile as a service provider and we need the internet and MMS settings for the phone. also the phone is running stock att 2.1. thanks
You should trade with somebody who has a Vibrant, as Simple Mobile uses T-Mo 3G bands.
Plus, you know, they have their settings on their own website.
thanks everything is working expect that when she receive MMS they wont download any help with that?
http://simplemobile.wdsglobal.com/m...tworkId=&phoneId=3614&bearerId=&mobileNumber=
Setting up the data account
On the device, tap the Menu key.
Tap Settings > Wireless & networks > Mobile networks > Access Point Names.
Press the Menu key and select New APN.
Select Name, enter Simple MMS and tap OK.
Select APN, enter simple and tap OK.
Enter the Username and Password listed below. If no value is listed, leave the field blank.
Username:
Password:
Select MMSC, enter http://smpl.mms.msg.eng.t-mobile.com/mms/wapenc and tap OK.
Select MMS proxy, enter 216.155.165.50 and tap OK.
Select MMS port, enter 8080 and tap OK.
Select APN type and tap MMS.
Select Authentication type, select PAP and tap OK.
Press the Menu key and select Save.

Categories

Resources