Database Info

Will my O2 Pay as you go sim card work in an XDA 11i ?

I am hoping to buy a XDA 11i of a mate -he's on contract and got this XDA 11i as a free upgrade.
Anyway he wants to raise some cash so he selling the new xda 11i to me and going back to using his previous phone with the existing contract.
Will I be able to put my Pay As You Go sim card in the XDA 11i slot and use it normally - -as a phone, camera etc - or will it have to be unlocked or something.
I am a newbie to this kind of thing and don't want to buy it if I can't get it to work on PAYG.
Thanks for any help folks.

Hello
You will be able to use your sim but will not be able to use the GPRS part as it is not supported by o2.If any one knows a way around this then I know 2 people at least that want to know
Roger :lol:

chiprw said:
Hello
You will be able to use your sim but will not be able to use the GPRS part as it is not supported by o2.If any one knows a way around this then I know 2 people at least that want to know
Roger :lol:
Click to expand...
Click to collapse
Says Who ???
Phone o2 customer care and they will enable the SIM :roll:

Zincubus said:
I am hoping to buy a XDA 11i of a mate -he's on contract and got this XDA 11i as a free upgrade.
Anyway he wants to raise some cash so he selling the new xda 11i to me and going back to using his previous phone with the existing contract.
Will I be able to put my Pay As You Go sim card in the XDA 11i slot and use it normally - -as a phone, camera etc - or will it have to be unlocked or something.
I am a newbie to this kind of thing and don't want to buy it if I can't get it to work on PAYG.
Thanks for any help folks.
Click to expand...
Click to collapse
payandgo settings for GPRS (email/MMS/Internet explorer) are available on this site
I phoned o2 and they even gave me the settings for the GPRS.
good luck.

I can only go off what I have been told in the settings I can not select payg as an option and when the settings for gprs are put in place even by the manager in the shop and by myself it still fails to connect they stated it will only allow you to get to the o2 active site.again if anyone can prove otherwise i for one will be gratefull.

Please note the following:
When entering 'o2' please use the letter 'o'.
Replies to this email cannot be answered. If you have any further queries about this email please call Customer Service.
Below are the Xda II GPRS WAP manual settings Pre-pay
It is not possible to select the 'Prepaid' option within 'My Xda' Connections in the O2 Active UI on the XdaII - 'Postpaid' is selected as default and cannot be changed.
To use the XdaII with an O2 Prepay SIM then the WAP settings will need to be changed manually - note that it will not be necessary to carry out a hard (full) reset in order to complete this.
IMPORTANT - once the WAP settings have been changed, if a hard reset is carried out at some future point, then the settings will automatically be re-configured back to Postpaid and they will need to be manually changed again..
XdaII Manual Setup - GPRS WAP (Prepay)
Tap Start > Settings
Tap 'Connections' tab
Tap 'Connections' icon
Under 'My Work Network' tap 'Manage existing connections'
Tap 'Edit'
The 'Select a modem:' drop-down box should be set to 'Cellular Line (GPRS)'
Tap 'Next'
Access Point Name: payandgo.o2.co.uk
Tap 'Next'
Usernameayandgo
Password: password
Domain: leave blank
Tap 'Advanced'
On the 'TCP/IP' tab, only 'Use server-assigned IP address' should be selected
Tap the 'Servers' tab
Only 'Use server-assigned addresses' should be selected
Tap 'OK'
Tap 'Finish'
Tap 'Proxy Settings' tab (*Note, the soft keyboard may be hiding this tab - tap the keyboard icon at bottom right to clear this away)
Ensure that 'This network connects to the Internet' box is ticked
Ensure that 'This network uses a proxy server to connect to the Internet' box is ticked
Tap 'Advanced'
In the 'WAP' field (Server) enter: 193.113.200.195
In the field to the right of this (Port) enter: 9201
Tap 'OK' and exit
Once you have installed the settings into your handset and saved them, please switch off your handset and switch it back on. This will activate the settings for you.
If you are going to put your SIM card into another mobile, you will need new O2 settings. You can easily set up your new mobile to use O2 services and picture messaging. Simply visit our website @ http://www.o2.co.uk/productsservices/ota2/select/0,,184,00.html
Regards
O2 Customer Service
Please note that replies to this email cannot be answered. If you have any further queries about this email please call Customer Service.

To get the Internet explorer to work, use these settings
HTTP: 193.113.200.195 PORT : 8080
WAP: 193.113.200.195 PORT: 9201
SecureWAP : EMPTY
Socks: 193.113.200.195 PORT: 1080
Type : Socks 4 setected
and the rest is same as explained before

Great it works for me on my 02 settings but will these settings allow me to fetch my emails and go on MSN,Thanks

emails ..yes
Msn .. dont know (I don't use it)

ive tried email but cant seem to get it to work ,Do i let it connect through my work connection or not,Ive recieved email with my orange sim but am anting to switch to o2 now i can get mobie web just cant seem to get email,Any help would be great,Cheers

Use My ISP in Network conection settings

treo 750 mms/wap?

hallo i am from greece!!! i dont know how to activate mms/wap i dont understand i have q if you know somethink tell me please!!! i have Q card its is the same company with wind
Sorry about my english!!!

here is a guide to my server .
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.

libal said:
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: uwap.orange.co.il
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 192.118.11.55
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 192.118.11.55:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +97254120032
12. Email center number is 500
13. MMS gateway address is 192.118.11.55:8080
14. MMS URL is http://192.168.220.15/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.
You need to find the right numbers for your cell server.
Click to expand...
Click to collapse
thank you!!!!! you are the best

it doesn't work!!! i dont know why

ATT MMS
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?

there is option to install palm sms software
shaunehannen said:
Hello, I need help with my ATT palm treo 750 running windows mobile 6.5(yea thats right, 6.5 ). The rom doesnt come with MMS support, so i installed arcsoft mms which is what windows mobile comes with right out of the box...now i need to configure the MMS settings so i can send/recieve mms files. When i try to send a MMS the pop up comes up saying "connectiong to isp.cingular" or sometimes if that doesnt work "wap.cingular" after about 10 seconds i get a popup saying message could not be sent. any help?
Click to expand...
Click to collapse
http://rapidshare.com/files/99335294/threadedsms.rar
or
http://www.megaupload.com/?d=H63TXUP4

recieving picture messages

My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub

I think that it is the setting
se here : maybe there is a deference between the numbers and your server. ask your server for the correct numbers.
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: wap.voicestream.com
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: 216.155.165.050
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows 216.155.165.050:8080. If not, change it.
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number +12063130004
12. Email center number is 500
13. MMS gateway address is 216.155.165.050:8080
14. MMS URL is http://216.155.174.84/servlets/mms
15. Finally under Network Profile select: My Work Network and then click ok.

I have the same problem!!
dub08 said:
My Treo 750 will not recieve picture messages.. Tell me to log into my tmobile account to view.. Is there any way to fix this error?
Thanks
Dub
Click to expand...
Click to collapse
I was wondering did that solution that was given work for your phone cause it didn't for me. If it didn't work have your found out how to resolve the issue cause i haven't fixed mine yet.
thanks

I Can't send MMS and can't access Internet Explorer

Hi to ALL,
I got a Treo 750 AT&T from a friend who got back from the U.S...Am now in the Philippines and am using a local network (SMART). I am having a problem however in sending MMS files. everytime i try, there is a prompt which says, "connecting to AT&T...GPRS and 3G... and then the MMS stays in the outbox folder..this happens everytime i try to send an MMS. It won't access to the Internet explorer either...the only thuing I can use is sending text messages...the rest of the functions won't work. I am confused now as to how am I gonna use my treo phone to its maximum features.. I hope somenoe can help me on this...
Thank you.

It seems your phone is trying to access Internet using connection settings for previous US operator. Did you make all the settings for your local network (Start > Settings > Connections > etc.)?

a guide how to do it
1. Start, Settings, Connections, and then tap the Connections Icon
2. Under "My Work Network" tap Add a New Modem Connection
3. Name it Picture Messaging and under Select a modem select (GPRS,3G)
4. Under Access Point Name type: ____________ (ask your cell company)
5. Username, Password, and Domain is left blank and then click Finish
6. Now, go into Proxy Settings and check "This network connects to the Internet" and check "This network uses a proxy server to connect to the internet"
7. Under the Proxy Server box type: _________ (ask your cell company)
8. Tap the advanced button and tap on the HTTP line. Make sure the HTTP settings shows __________ (ask your cell company)
9. Click the OK button a few times to get out of the settings completely.
10.Now go to Start, Messaging, Menu, then Options, Advance, then Click Manual, and then the Edit button
11. Message center number _________ (ask your cell company)
12. Email center number is _____ (ask your cell company)
13. MMS gateway address is ___________ (ask your cell company)
14. MMS URL is http://xxx.xxx.xxx.xxx/servlets/mms (ask your cell company)
15. Finally under Network Profile select: My Work Network and then click ok.

Thank you very much for sending me this procedure to correct the setting of my mobile phone. I will coordinate with my Local network here in the Phils. to supply the needed settings.
Best regards,
Abrille

Dear All,
I have followed the instructions that you have given to me but still I couldn't access and/or browse the internet as well as receiving MMS format files. I tried to access and view some threads and I happened to see an email thread that gives an instruction on how to Re-flash/Unbrand a Palm Treo 750... I would like to ask your expertise Sirs if this is the next possible way or solution to solve the problem with my Treo 750? I hope someone can help me on this...thank you and more power to all.
Abrille

To access internet via Internet Explorer, you need the correct GPRS/WAP settings to tell it to use the right APN.
Try the settings listed here:
http://smart.com.ph/corporate/support/FAQs/GPRS+and+MMS+settings.htm
To set up a new GPRS connection profile use this:
http://www.microsoft.com/windowsmob...-cellular-grps-internet-connection-touch.aspx

Radio/Rom Combo that works well for Airfire/Einstein Wireless (great bat life)

Hi everyone..
I know radio performance varies greatly depending on your geographical location, but I use a smaller carrier that only operates in 1 state... (well, I can roam around the US, but only home area is 1 state)... After playing around with MANY roms & radios, this is what I found...
I am using a US Cellular branded Touch Pro 2....
I am using the "Energy.RHODCDMA.21911.Sense2.5.Cookie.Jul.24" rom w/ the "VZW_1.88.07WV" radio... I get the highest level of signal with this radio.. At home, I wa typicalls gettign 0-2 bars.. now I get 3-5... Also, as an added suprise.. my battery life has tripled (And I am still using it just as much, if not more).... I was very happily suprised and shocked... Also, the GPS seems to lock in pretty quickly too right out of the box....
You still need to manualyl set up your internet and MMS settings with this (and all) rom... and the settings are for the newest Airfire/Einstein settings...
first off, of course make sure you turn CDMA off and only GSM on... (not world phone mode)...
1. Start
>Settings
>Connections Tab
>Connections
2. Add New Connection
3. Enter name for connection “Airfire Internet”
>Under select modem select “Cellular Line (GPRS)”
>Next
4. Enter access point name> internet.air.net
>Next
5. Leave User name, Password and Domain all blank
> tap Finish
E-Mail
1. Start>Messaging
2. On messaging screen select Menu in bottom right corner and go to options
3. Select Outlook E-mail from list
4. Under server address enter> webmail.airadigm.com
>check the box for SSL connection
>Next
5. Enter in your user name and password for your e-mail
>enter airadigm under domain
>check box for save password
>Next
6. Select what you want your phone to sync with on your PC
> Finish
7. Start
>Settings>Connections tab> Comm Manager
>Turn on Data Connection and Microsoft Direct Push
8. Wait a few minutes and your e-mail should sync with your PC
MMS
1. Start> Messaging> SMS/MMS> Menu in right corner> MMS Options
2. Servers tab> New> Airfire MMS
>leave gateway blank> Port: 8080
>Server address: http://mms.airfiremobile.com/+1(10 digit number)
> Under Connect via select Airfire Internet
>Done Note: You must add the +1 before your number
3. When screen returns to the settings page after entering MMS settings set your MMS settings you just created as default.
I hope this helps everyone who has airfire... or even people just looking for a great rom/radio combination that gives good battery life!